hold its own values, pass them up to the parent (acpi0) and merge/uniq them
on the way. After the namespace evaluation, acpi will reserve these
resources and manage them via rman before bus_generic_probe() and
bus_generic_attach(). This is necessary because some systems specify
conflicting resources in separate sysresource objects. It's also cleaner
in that the interface between sysresource and acpi is now merely the parent's
resource list. This code handles the following cases:
1. Unique resource: add it to the parent via bus_set_resource().
2. New wholly contained in old: discard new.
3. New tail overlaps old head: grow old head downward.
AND/OR
4. New head overlaps old tail: grow old tail upward.
Tested by: Pawel Worach <sajd_at_telia.com>
Tested by: Radek Kozlowski <radek_at_raadradd.com>
MFC after: 5 days
with VmWare 4.x. At least with VmWare version 4.5.2, i386 version of
atomic_cmpset_int() is about 30 times slower than non-i386 version. It
makes this delta a good 5.3 MFC candidate, since otherwise it will
mislead users who run FreeBSD under modern VmWare otherwise.
valid; otherwise a caller could trick us into changing any 32-bit word
in kernel memory to LINUX_SOL_SOCKET (0x00000001) if its previous value
is SOL_SOCKET (0x0000ffff).
MFC after: 3 days
The prefix management code currently resides in nd6, leaving only the
unused router renumbering capability in the in6_prefix files. Removing
it will make it easier for us to provide locking for the remainder of
IPv6 by reducing the number of objects requiring synchronized access.
This functionality has also been removed from NetBSD and OpenBSD.
Submitted by: George Neville-Neil <gnn at neville-neil.com>
Discussed with/approved by: suz, keiichi at kame.net, core at kame.net
deal with 24-bit addresses. While the two other attachments, namely
isa and cbus, do it properly, the PCI attachment was passing
BUS_SPACE_MAXADDR instead of BUS_SPACE_MAXADDR_24BIT. This bug
became apparent with the new contigmalloc() code.
This fixes the problem reported with lnc(4) interfaces inside VMWare,
and should theoritically also fix any user of a PCI lnc(4) card. It
is a RELENG_5 MFC candidate.
Tested by: Florian Le Goff <madflo@beertech.org>
position that is 64-bit aligned and makes sure that the valid and
dirty fields are also 64-bit aligned. This means that if PAGE_SIZE
is 32K, the size of the vm_page structure is only increased by 8
bytes instead of 16 bytes. More importantly, the vm_page structure
is either 120 or 128 bytes on ia64. These are "interesting" sizes.
before returning. Device nodes are created via the "taste" mechanism,
so this is necessary in order to make sure that devfs entries are
created before mdconfig(8) returns.
This may be a MFC candidate for 5.3.
Suggested by: phk
allocation. Notably, in this case, the driver tries to allocate several
pieces of memory and then fails if the pieces allocated after the first
do not come after it physically, and within a specific range (8MB I
believe). Of course, this could just as easily fail for any number of
reasons, but it almost always fails now that contiguous allocations start
at the end of possible specified memory locations rather than the beginning.
Allocate all the possibly-needed memory up front, even though it's a waste,
to get around this. The least bogus solution would be to take the physical
address from the first allocation and create a new tag that specified that
further allocations must follow it within that 8MB window, then use that
when allocating new channels, but that's left for anyone else that really
feels like doing it.
Tested by: Erwin Lansing <erwin@lansing.dk>
Previously the early drop was disabled unconditionally for ALTQ-enabled
kernels.
This should give some benefit for the normal gateway + LAN-server case with
a busy LAN leg and an ALTQ managed uplink.
Reviewed and style help from: cperciva, pjd
verification of regular data when device is in complete state.
On verification error, EIO error is returned for the bio and sysctl
kern.geom.raid3.stat.parity_mismatch is increased.
Suggested by: phk
The whole problem seems to be size. Which is odd, because it is said
that size doesn't matter. Anyway... Add -Os to strategic places in the
makefile to have the final loader be as mall as possible. This seems
to be enough to make it work. For now... I think something is more
fundamentally wrong; or something more fundamental is wrong. Potato,
potaato.
be manipulated by prison root. In 4.x prison root can not manipulate
system flags, regardless of the security level. This behavior
should remain consistent to avoid any surprises which could lead
to security problems for system administrators which give out
privileged access to jails.
This commit changes suser_cred's flag argument from SUSER_ALLOWJAIL
to 0. This will prevent prison root from being able to manipulate
system flags on files.
This may be a MFC candidate for RELENG_5.
Discussed with: cperciva
Reviewed by: rwatson
Approved by: bmilekic (mentor)
PR: kern/70298
as m_len, or the pkthdr length will be inconsistent with the actual
length of data in the mbuf chain. The symptom of this occuring was
"out of data" warnings from in_cksum_skip() on large UDP packets sent
via the loopback interface.
Foot shot: green
The binutils 2.15 assembler now automaticly and non-optionally adds
the .eh_frame section for unwind information. This section appears
to wreck havoc to the final boot code. Fix this by using a special
linker script that discards the .eh_frame sections, but is otherwise
identical to the linker internal script used for -N.
Compiler used: gcc 3.3.5
Verified with: binutils 2.14 & binutils 2.15 (stock and in-tree)
Tested with: /boot/loader & /boot/netboot
the tunable or sysctl 'net.route.netisr_maxqlen'. Default the maximum
depth to 256 rather than IFQ_MAXLEN due to the downsides of dropping
routing messages.
MT5 candidate.
Discussed with: mdodd, mlaier, Vincent Jardin <jardin at 6wind.com>
rule only in place of all rules match. This is similar to how ipfw(8) works.
Provide a sysctl, mac_bsdextended_firstmatch_enabled, to enable this
feature.
Reviewed by: re (jhb)
Aprroved by: re (jhb)
manipulating a vnode, e.g., calling vput(). This reduces contention for
Giant during many copy-on-write faults, resulting in some additional
speedup on SMPs.
Note: debug_mpsafevm must be enabled for this optimization to take effect.
as well, even if device is in complete state.
I observe 40% of speed-up with this option for random read operations,
but slowdown for sequential reads.
Basically, without this option reading from a RAID3 device built from 5
components (c0-c4) looks like this:
Request no. Used components
1 c0+c1+c2+c3
2 c0+c1+c2+c3
3 c0+c1+c2+c3
With the new feature:
Request no. Used components
1 c0+c1+c2+c3
2 (c1^c2^c3^c4)+c1+c2+c3
3 c0+(c0^c2^c3^c4)+c2+c3
4 c0+c1+(c0^c1^c3^c4)+c3
5 c0+c1+c2+(c0^c1^c2^c4)
6 c0+c1+c2+c3
[...]
security.jail.allow_raw_sockets sysctl MIB is set to 1) where privileged
access to jails is given out, it is possible for prison root to manipulate
various network parameters which effect the host environment. This commit
plugs a number of security holes associated with the use of raw sockets
and prisons.
This commit makes the following changes:
- Add a comment to rtioctl warning developers that if they add
any ioctl commands, they should use super-user checks where necessary,
as it is possible for PRISON root to make it this far in execution.
- Add super-user checks for the execution of the SIOCGETVIFCNT
and SIOCGETSGCNT IP multicast ioctl commands.
- Add a super-user check to rip_ctloutput(). If the calling cred
is PRISON root, make sure the socket option name is IP_HDRINCL,
otherwise deny the request.
Although this patch corrects a number of security problems associated
with raw sockets and prisons, the warning in jail(8) should still
apply, and by default we should keep the default value of
security.jail.allow_raw_sockets MIB to 0 (or disabled) until
we are certain that we have tracked down all the problems.
Looking forward, we will probably want to eliminate the
references to curthread.
This may be a MFC candidate for RELENG_5.
Reviewed by: rwatson
Approved by: bmilekic (mentor)
result of the notify() function to decide if we need to unlock the
in6pcb or not, rather than always unlocking. Otherwise, we may unlock
and already unlocked in6pcb.
Reported by: kuriyama, Gordon Bergling <gbergling at 0xfce3.net>
Tested by: kuriyama, Gordon Bergling <gbergling at 0xfce3.net>
Discussed with: mdodd
UDP/IP header, make sure that space is also allocated for the link
layer header. If an mbuf must be allocated to hold the UDP/IP header
(very likely), then this will avoid an additional mbuf allocation at
the link layer. This trick is also used by TCP and other protocols to
avoid extra calls to the mbuf allocator in the ethernet (and related)
output routines.
to check aperture size, avoiding hangs. Maintain the rest of the bits when
setting/unsetting ATTBASE. This essentially matches Linux's AGP driver as well.
PR: kern/70037
Submitted by: Mark Tinguely <tinguely at casselton dot net>
Obtained from: NetBSD
in the shutdown_final state if the RB_NOSYNC flag is set.
The specific motivation in this case is that a system panic in an
interrupt context results in a call to module_shutdown(), which
calls g_modevent(), which calls g_malloc(..., M_WAITOK), which
results in a second panic. While g_modevent() could be fixed to
not call malloc() for MOD_SHUTDOWN events (which it doesn't handle
in any case), it is probably also a good idea to entirely skip the
execution of the module shutdown handlers after a panic.
This may be a MFC candidate for RELENG_5.
shutdown_pre_sync state if the RB_NOSYNC flag is set. This is the
likely cause of hangs after a system panic that are keeping crash
dumps from being done.
This is a MFC candidate for RELENG_5.
MFC after: 3 days
systems that have overlapping regions specified in their sysresource
objects. This patch fixes ATA DMA and acpi_timer allocation for such
sysctems. It should eventually be moved to resource_list_add() if it is
a valid generalized approach. The minimal approach for 5.3 is:
"Loop through all current resources to see if the new one overlaps
any existing ones. If so, the old one always takes precedence and
the new one is adjusted (or rejected). We check for three cases:
1. Tail of new resource overlaps head of old resource: truncate the
new resource so it is contiguous with the start of the old.
2. New resource wholly contained within the old resource: error.
3. Head of new resource overlaps tail of old resource: truncate the
new resource so it is contiguous, following the old."
Tested by: Radek Kozlowski <radek_at_raadradd.com>
Discussed with: imp
MFC after: 4 days
of 0x3f2-0x3f5,0x3f7 the ports are not 7 bytes apart. This should fix
floppy probing on such systems. (We handle the case of adjusting for
a start of 0x3f2 -> 0x3f0 separately, although that code should still be
checked if there are still floppy problems for others.)
Tested by: Sarunas Vancevicius <vsarunas_at_eircom.net>
MFC after: 3 days
sockets are connection-oriented for the purposes of kqueue
registration. Since UDP sockets aren't connection-oriented, this
appeared to break a great many things, such as RPC-based
applications and services (i.e., NFS). Since jmg isn't around I'm
backing this out before too many more feet are shot, but intend to
investigate the right solution with him once he's available.
Apologies to: jmg
Discussed with: imp, scottl
Centralize the fdctl_wr() function by adding the offset in
the resource to the softc structure.
Bugfix: Read the drive-change signal from the correct place:
same place as the ctl register.
Remove the cdevsw{} related code and implement a GEOM class.
Ditch the state-engine and park a thread on each controller
to service the queue.
Make the interrupt FAST & MPSAFE since it is just a simple
wakeup(9) call.
Rely on a per controller mutex to protect the bioqueues.
Grab GEOMs topology lock when we have to and Giant when
ISADMA needs it. Since all access to the hardware is
isolated in the per controller thread, the rest of the
driver is lock & Giant free.
Create a per-drive queue where requests are parked while
the motor spins up. When the motor is running the requests
are purged to the per controller queue. This allows
requests to other drives to be serviced during spin-up.
Only setup the motor-off timeout when we finish the last
request on the queue and cancel it when a new request
arrives. This fixes the bug in the old code where the motor
turned off while we were still retrying a request.
Make the "drive-change" work reliably. Probe the drive on
first opens. Probe with a recal and a seek to cyl=1 to
reset the drive change line and check again to see if we
have a media.
When we see the media disappear we destroy the geom provider,
create a new one, and flag that autodetection should happen
next time we see a media (unless a specific format is configured).
Add sysctl tunables for a lot of drive related parameters.
If you spend a lot of time waiting for floppies you can
grab the i82078 pdf from Intels web-page and try tuning
these.
Add sysctl debug.fdc.debugflags which will enable various
kinds of debugging printfs.
Add central definitions of our well known floppy formats.
Simplify datastructures for autoselection of format and
call the code at the right times.
Bugfix: Remove at least one piece of code which would have
made 2.88M floppies not work.
Use implied seeks on enhanced controllers.
Use multisector transfers on all controllers. Increase
ISADMA bounce buffers accordingly.
Fall back to single sector when retrying. Reset retry count
on every successful transaction.
Sort functions in a more sensible order and generally tidy
up a fair bit here and there.
Assorted related fixes and adjustments in userland utilities.
WORKAROUNDS:
Do allow r/w opens of r/o media but refuse actual write
operations. This is necessary until the p4::phk_bufwork
branch gets integrated (This problem relates to remounting
not reopening devices, see sys/*/*/${fs}_vfsops.c for details).
Keep PC98's private copy of the old floppy driver compiling
and presumably working (see below).
TODO (planned)
Move probing of drives until after interrupts/timeouts work
(like for ATA/SCSI drives).
TODO (unplanned)
This driver should be made to work on PC98 as well.
Test on YE-DATA PCMCIA floppy drive.
Fix 2.88M media.
This is a MT5 candidate (depends on the bioq_takefirst() addition).
is an effective band-aid for at least some of the scheduler corruption seen
recently. The real fix will involve protecting threads while they are
inconsistent, and will come later.
Submitted by: julian
requires a recompile of netgraph users.
Also change the size of a field in the bluetooth code
that was waiting for the next change that needed recompiles so
it could piggyback its way in.
Submitted by: jdp, maksim
MFC after: 2 days
changes to the ATA driver cause a kernel crash, no fault of the ATA
code. Work is in progress to add the necessary feature to the sparc64
kernel and this commit will be backed out when it is complete. This
bandaid is being put in mostly in the interests of getting the first
release snapshot done and out the door.
Tested on: Ultra-10 exhibiting the insta-panic.
MFC: Real Soon
If the bioq is empty, NULL is returned. Otherwise the front element
is removed and returned.
This can simplify locking in many drivers from:
lock()
bp = bioq_first(bq);
if (bp == NULL) {
unlock()
return
}
bioq_remove(bp, bq)
unlock
to:
lock()
bp = bioq_takefirst(bq);
unlock()
if (bp == NULL)
return;
Since pmap_enter() calls pmap_invalidate_page(), which needs interrupts
enabled in the SMP case, we defer the disable to right before saving the
register context. This has been incorrect for about a year but caused no
real problems because the identity page never actually replaces a previously
mapped page and suspend/resume on SMP systems has been uncommon.
Tested by: sos
MFC after: 3 days
the ipfw KLD.
For IPFIREWALL_FORWARD this does not have any side effects. If the module
has it but not the kernel it just doesn't do anything.
For IPDIVERT the KLD will be unloadable if the kernel doesn't have IPDIVERT
compiled in too. However this is the least disturbing behaviour. The user
can just recompile either module or the kernel to match the other one. The
access to the machine is not denied if ipfw refuses to load.
have been unified with that of msleep(9), further refine the sleepq
interface and consolidate some duplicated code:
- Move the pre-sleep checks for theaded processes into a
thread_sleep_check() function in kern_thread.c.
- Move all handling of TDF_SINTR to be internal to subr_sleepqueue.c.
Specifically, if a thread is awakened by something other than a signal
while checking for signals before going to sleep, clear TDF_SINTR in
sleepq_catch_signals(). This removes a sched_lock lock/unlock combo in
that edge case during an interruptible sleep. Also, fix
sleepq_check_signals() to properly handle the condition if TDF_SINTR is
clear rather than requiring the callers of the sleepq API to notice
this edge case and call a non-_sig variant of sleepq_wait().
- Clarify the flags arguments to sleepq_add(), sleepq_signal() and
sleepq_broadcast() by creating an explicit submask for sleepq types.
Also, add an explicit SLEEPQ_MSLEEP type rather than a magic number of
0. Also, add a SLEEPQ_INTERRUPTIBLE flag for use with sleepq_add() and
move the setting of TDF_SINTR to sleepq_add() if this flag is set rather
than sleepq_catch_signals(). Note that it is the caller's responsibility
to ensure that sleepq_catch_signals() is called if and only if this flag
is passed to the preceeding sleepq_add(). Note that this also removes a
sched_lock lock/unlock pair from sleepq_catch_signals(). It also ensures
that for an interruptible sleep, TDF_SINTR is always set when
TD_ON_SLEEPQ() is true.
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
lock is not held.
Rather than annotating that the lock is released after calls to
unp_detach() with a comment, annotate with an assertion.
Assert that the UNIX domain socket subsystem lock is not held when
unp_externalize() and unp_internalize() are called.
This provides greater context for the locking and allows us to avoid
locking the pcbinfo structure if not binding operations will take
place (i.e., already bound, connected, and no expliti sendto()
address).
drive is known to the configuration check also if it already has a geom.
Without this check several needless geoms are created and valid
configuration data was overwritten.
This change obsoletes the need for a separate geom to taste an
offered provider and the consumer doesn't need to be opened with the
exclusive bit set.
the driver to issue a bus reset more quickly than intended. We want to
*wait* if we find another SCB that could be the cause of this timeout,
not proceed to a bus reset.
Noticed by: kan
callers. These ioctls attempted to enable and disable the ACPI
interpreter at runtime. In practice, it is not possible to boot with
ACPI and then disable it on many systems and trying to do so can cause
crashes, interrupt storms, etc. Binary compatibility with userland is
retained.
MFC after: 2 days
ACPI_DEBUG case. Without this, use of allocated memory is unaligned and
causes a trap on ia64. Intel may fix this differently in a subsequent
release but this is adequate for now.
Submitted by: marcel
MFC after: 2 days
amd64 agp option here in order to let the pc98 kernel build
complete. This doesn't seem right, since there probably aren't
plans to build a pc98 amd64 box; however, it's not clear to me
how to get config to generate an opt_agp.h without an option
defined.
and preserves the ipfw ABI. The ipfw core packet inspection and filtering
functions have not been changed, only how ipfw is invoked is different.
However there are many changes how ipfw is and its add-on's are handled:
In general ipfw is now called through the PFIL_HOOKS and most associated
magic, that was in ip_input() or ip_output() previously, is now done in
ipfw_check_[in|out]() in the ipfw PFIL handler.
IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to
be diverted is checked if it is fragmented, if yes, ip_reass() gets in for
reassembly. If not, or all fragments arrived and the packet is complete,
divert_packet is called directly. For 'tee' no reassembly attempt is made
and a copy of the packet is sent to the divert socket unmodified. The
original packet continues its way through ip_input/output().
ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet
with the new destination sockaddr_in. A check if the new destination is a
local IP address is made and the m_flags are set appropriately. ip_input()
and ip_output() have some more work to do here. For ip_input() the m_flags
are checked and a packet for us is directly sent to the 'ours' section for
further processing. Destination changes on the input path are only tagged
and the 'srcrt' flag to ip_forward() is set to disable destination checks
and ICMP replies at this stage. The tag is going to be handled on output.
ip_output() again checks for m_flags and the 'ours' tag. If found, the
packet will be dropped back to the IP netisr where it is going to be picked
up by ip_input() again and the directly sent to the 'ours' section. When
only the destination changes, the route's 'dst' is overwritten with the
new destination from the forward m_tag. Then it jumps back at the route
lookup again and skips the firewall check because it has been marked with
M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with
'option IPFIREWALL_FORWARD' to enable it.
DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for
a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will
then inject it back into ip_input/ip_output() after it has served its time.
Dummynet packets are tagged and will continue from the next rule when they
hit the ipfw PFIL handlers again after re-injection.
BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as
they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS.
More detailed changes to the code:
conf/files
Add netinet/ip_fw_pfil.c.
conf/options
Add IPFIREWALL_FORWARD option.
modules/ipfw/Makefile
Add ip_fw_pfil.c.
net/bridge.c
Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw
is still directly invoked to handle layer2 headers and packets would
get a double ipfw when run through PFIL_HOOKS as well.
netinet/ip_divert.c
Removed divert_clone() function. It is no longer used.
netinet/ip_dummynet.[ch]
Neither the route 'ro' nor the destination 'dst' need to be stored
while in dummynet transit. Structure members and associated macros
are removed.
netinet/ip_fastfwd.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code.
netinet/ip_fw.h
Removed 'ro' and 'dst' from struct ip_fw_args.
netinet/ip_fw2.c
(Re)moved some global variables and the module handling.
netinet/ip_fw_pfil.c
New file containing the ipfw PFIL handlers and module initialization.
netinet/ip_input.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code. ip_forward() does not longer require
the 'next_hop' struct sockaddr_in argument. Disable early checks
if 'srcrt' is set.
netinet/ip_output.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code.
netinet/ip_var.h
Add ip_reass() as general function. (Used from ipfw PFIL handlers
for IPDIVERT.)
netinet/raw_ip.c
Directly check if ipfw and dummynet control pointers are active.
netinet/tcp_input.c
Rework the 'ipfw forward' to local code to work with the new way of
forward tags.
netinet/tcp_sack.c
Remove include 'opt_ipfw.h' which is not needed here.
sys/mbuf.h
Remove m_claim_next() macro which was exclusively for ipfw 'forward'
and is no longer needed.
Approved by: re (scottl)
also generates a notify. Since we held the lock over this call, the
notify never got to run and the battery status read never returned.
Document this also.
Tested by: Maxim Maximov <mcsi_at_mcsi.pp.ru>
Approved by: re (scottl)
data packet is received from the mouse. In the case of many KVM's,
this avoids a bug in their mouse emulation that sends back incorrect
sync when you explicitly request a data packet from the mouse. Without
this change, you must force the driver into stock PS/2 mode or be flooded
with a never ending stream of "out of sync" messages on these KVMs.
Approved by: re
The ISA probe uses an identify routine to probe all slot locations from
1 to 14 that do not conflict with other allocated resources. This required
making aic7770.c part of the driver core when compiled as a module.
aic7xxx.c:
aic79xx.c:
aic_osm_lib.c:
Use aic_scb_timer_start() consistently to start the watchdog timer.
This removes a few places that verbatum copied the code in
aic_scb_timer_start().
During recovery processing, allow commands to still be queued to
the controller. The only requirement we have is that our recovery
command be queued first - something the code already guaranteed.
The only other change required to make this work is to prevent
timers from being started for these newly queued commands.
Approved by: re
- Add some commented out NICs from i386 GENERIC. Most of them look like they
would work but I'm not sure if they are endian-clean and can't test. There
was a report that sk(4) works on sparc64 but it doesn't look like it would
because it doesn't use busdma.
- Improve some of the descriptions of sparc64 specific devices.
There's no functional change, i.e. no added or deleted uncommented devices or
options, in this commit.
- Chase the split of pcm(4). This unbreaks LINT compiles.
- sc(4) basically works and a lot of its options should be supported.
- Add the creator and ofw_console drivers.
- vinum(4) should work, at least its module was turned on for sparc64 a while
ago.
- Don't build sio(4). Its EBus front-end was removed a while ago and the ISA
one hardly works. Use uart(4) instead, it's not perfect yet but works much
better.
only required to support probing of the Adaptec 284X VLB SCSI controller
which becomes visible in EISA space if you perform these writes. 284X
probing is moving to an ISA attachment.
parent rather than track resources locally. The original code
was incomplete in that it would only honor requests for resources
that already exist in its resource list. This prevented many ISA
identify routines from allocating temporary resources. Passing
the requests up to legacy's parent losing no functionality and
allows these requests to succeed.
Reviewed by: imp, jhb
Approved by: RE
have been rush hour...
While here, move COMPAT_IA32 from opt_global.h to opt_compat.h like on
amd64. Consequently, it's unsafe to use the option in pcb.h. We now
unconditionally have the ia32 specific registers in the PCB.
This commit is untested.
This was tested with a Netgear WG311v2 802.11b/g PCI card. Things
that were fixed:
- This chip has two memory mapped regions, one at PCIR_BAR(0) and the
other at PCIR_BAR(1). This is a little different from the other
chips I've seen with two PCI shared memory regions, since they tend
to have the second BAR ad PCIR_BAR(2). if_ndis_pci.c tests explicitly
for PCIR_BAR(2). This has been changed to simply fill in ndis_res_mem
first and ndis_res_altmem second, if a second shared memory range
exists. Given that NDIS drivers seem to scan for BARs in ascending
order, I think this should be ok.
- Fixed the code that tries to process firmware images that have been
loaded as .ko files. To save a step, I was setting up the address
mapping in ndis_open_file(), but ndis_map_file() flags pre-existing
mappings as an error (to avoid duplicate mappings). Changed this so
that the mapping is now donw in ndis_map_file() as expected.
- Made the typedef for 'driver_entry' explicitly include __stdcall
to silence gcc warning in ndis_load_driver().
NOTE: the Texas Instruments ACX111 driver needs firmware. With my
card, there were 3 .bin files shipped with the driver. You must
either put these files in /compat/ndis or convert them with
ndiscvt -f and kldload them so the driver can use them. Without
the firmware image, the NIC won't work.
- Trailing tab/space cleanup
- Remove spurious spaces between or before tabs
This change avoids touching files that Andre likely has in his working
set for PFIL hooks changes for IPFW/DUMMYNET.
Approved by: re (scottl)
Submitted by: Xin LI <delphij@frontfree.net>
prodstr may be NULL when fetched. For the default device description,
guard against this and return the numeric IDs instead when this
happens. For the matching routines, and consider NULL to not match
those entries that aren't NULL w/o calling strcmp.
Early patches by: Anders Hanssen
and can lead to two threads being granted exclusive access. Check that no one
has the same lock in exclusive mode before proceeding to acquire it.
The LK_WANT_EXCL and LK_WANT_UPGRADE bits act as mini-locks and can block
other threads. Normally this is not a problem since the mini locks are
upgraded to full locks and the release of the locks will unblock the other
threads. However if a thread reset the bits without obtaining a full lock
other threads are not awoken. Add missing wakeups for these cases.
PR: kern/69964
Submitted by: Stephan Uphoff <ups at tree dot com>
Very good catch by: Stephan Uphoff <ups at tree dot com>
address of the dirhash, rather than the first sizeof(struct dirhash
*) bytes of the structure (which, thankfully, seem to be constant).
Submitted by: Ted Unangst <tedu@zeitbombe.org>
MFC after: 2 weeks
- include <machine/../linux32/linux.h> instead of <machine/../linux/linux.h>
if building with the COMPAT_LINUX32 option.
- make minimal changes to the i386 linprocfs_docpuinfo() function to support
amd64. We return a fake CPU family of 6 for now.
with the COMPAT_LINUX32 option. This is largely based on the i386 MD Linux
emulations bits, but also builds on the 32-bit FreeBSD and generic IA-32
binary emulation work.
Some of this is still a little rough around the edges, and will need to be
revisited before 32-bit and 64-bit Linux emulation support can coexist in
the same kernel.
on AMD64, and the general case where the emulated platform has different
size pointers than we use natively:
- declare certain structure members as l_uintptr_t and use the new PTRIN
and PTROUT macros to convert to and from native pointers.
- declare some structures __packed on amd64 when the layout would differ
from that used on i386.
- include <machine/../linux32/linux.h> instead of <machine/../linux/linux.h>
if compiling with COMPAT_LINUX32. This will need to be revisited before
32-bit and 64-bit Linux emulation support can coexist in the same kernel.
- other small scattered changes.
This should be a no-op on i386 and Alpha.
"debug.mpsafevm" results in (almost) Giant-free execution of zero-fill
page faults. (Giant is held only briefly, just long enough to determine
if there is a vnode backing the faulting address.)
Also, condition the acquisition and release of Giant around calls to
pmap_remove() on "debug.mpsafevm".
The effect on performance is significant. On my dual Opteron, I see a
3.6% reduction in "buildworld" time.
- Use atomic operations to update several counters in vm_fault().
before dereferencing sotounpcb() and checking its value, as so_pcb
is protected by protocol locking, not subsystem locking. This
prevents races during close() by one thread and use of ths socket
in another.
unp_bind() now assert the UNP lock, and uipc_bind() now acquires
the lock around calls to unp_bind().
wait for system wires to disappear, do so (much more trivially) by
instead only checking for system wires of user maps and not kernel maps.
Alternative by: tor
Reviewed by: alc
- pipespace is now able to resize non-empty pipes; this allows
for many more resizing opportunities
- Backing is no longer pre-allocated for the reverse direction
of pipes. This direction is rarely (if ever) used, so this cuts the
amount of map space allocated to a pipe in half.
- Pipe growth is now much more dynamic; a pipe will now grow when
the total amount of data it contains and the size of the write are
larger than the size of pipe. Previously, only individual writes greater
than the size of the pipe would cause growth.
- In low memory situations, pipes will now shrink during both read
and write operations, where possible. Once the memory shortage
ends, the growth code will cause these pipes to grow back to an appropriate
size.
- If the full PIPE_SIZE allocation fails when a new pipe is created, the
allocation will be retried with SMALL_PIPE_SIZE. This helps to deal
with the situation of a fragmented map after a low memory period has
ended.
- Minor documentation + code changes to support the above.
In total, these changes increase the total number of pipes that
can be allocated simultaneously, drastically reducing the chances that
pipe allocation will fail.
Performance appears unchanged due to dynamic resizing.
for EBus, ISA and PCI, by compiling ofw_isa.c and ofw_pci_if.m unconditio-
nally. The correct way is to rewrite OF_decode_addr() in ofw_machdep.c in
a bus-neutral way. That's certainly possible but we unfortunately didn't
make it for FreeBSD 5.3.
Approved by: tmm
contained "sanity" checks that could be violated if another CPU modified
the pmap between the emulation trap and locking the pmap in
pmap_emulate_reference(). As a result, the pte could be inconsistent
with the access that caused the emulation trap. In such cases,
pmap_emulate_reference() now flushes the current CPU's TLB entry and
returns.
- Make pmap_changebit() an inline function, reducing object code size.
Don't count busy buffers before the initial call to sync() and
don't skip the initial sync() if no busy buffers were called.
Always call sync() at least once if syncing is requested. This
defers the "Syncing disks, buffers remaining..." message until
after the initial sync() call and the first count of busy
buffers. This backs out changes in kern_shutdown 1.162.
Print a different message when there are no busy buffers after the
initial sync(), which is now the expected situation.
Print an additional message when syncing has completed successfully
in the unusual situation where the work of syncing was done by
boot().
Uppercase one message to make it consistent with all of the other
kernel shutdown messages.
Discussed with: bde (in a much earlier form, prior to 1.162)
Reviewed by: njl (in an earlier form)
logical CPUs on a system to be used as a dedicated watchdog to cause a
drop to the debugger and/or generate an NMI to the boot processor if
the kernel ceases to respond. A sysctl enables the watchdog running
out of the processor's idle thread; a callout is launched to reset a
timer in the watchdog. If the callout fails to reset the timer for ten
seconds, the watchdog will fire. The sysctl allows you to select which
CPU will run the watchdog.
A sample "debug.leak_schedlock" is included, which causes a sysctl to
spin holding sched_lock in order to trigger the watchdog. On my Xeons,
the watchdog is able to detect this failure mode and break into the
debugger, which cannot otherwise be done without an NMI button.
This option does not currently work with sched_ule due to ule's push
notion of scheduling, similar to machdep.hlt_logical_cpus failing to
work with that scheduler.
On face value, this might seem somewhat inefficient, but there are a
lot of dual-processor Xeons with HTT around, so using one as a watchdog
for testing is not as inefficient as one might fear.
of PS_STRINGS. This is a no-op at present, but it will be needed when
running 32-bit Linux binaries on amd64 to ensure PS_STRINGS is in
addressable memory.
Without this, the device cannot detect the end of ethernet packets
whose size is a multiple of the USB packat size.
PR: kern/70474
Submitted by: Andrew Thompson <andy@fud.org.nz>
MFC after: 1 week
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
attempt to IPI other cpus when entering the debugger in order to stop
them while in the debugger. The default remains to issue the stop;
however, that can result in a hang if another cpu has interrupts disabled
and is spinning, since the IPI won't be received and the KDB will wait
indefinitely. We probably need to add a timeout, but this is a useful
stopgap in the mean time.
Reviewed by: marcel
and that can be used as an identify function for all kinds of busses on a
certain platform. Expect for sparc64 these are only stubs right now. [1]
- For sparc64, add code to its uart_cpu_identify() for registering the on-
board ISA UARTs and their resources based on information obtained from
Open Firmware.
It would be better if this would be done in the OFW ISA code. However, due
to the common FreeBSD ISA code and PNP-IDs not always being present in the
properties of the ISA nodes there seems to be no good way to implement that.
Therefore special casing UARTs as the sole really relevant ISA devices on
sparc64 seemed reasonable. [2]
Approved by: marcel
Discussed with: marcel [1], tmm [2]
Tested by: make universe
without Open Firmware directly instead of using OF_getetheraddr(). This is
a bit painful though, as the MAC address is contained in the NA field of
the VPD of the EBus bridge, which is is another function of the same chip.
To make it worse, the VPD of the EBus bridge can't be accessed via the PCI
capability pointer but has to be digged out from the Boot PROM and has a
non-standard format.
The PCI VPD struct and macros used here should be part of the FreeBSD PCI
code nevertheless.
Approved by: tmm
Based on: NetBSD
Tested with: Sun X1032A (hme(4)-isp(4)-combo card) on alpha and i386
o reprobe children when a new driver is added to uhub
o fix the usbd_probe_and_attach to set the ivars to a malloc'd area, as well
as freeing the ivars on child destruction.
o Don't delete children that don't attach. Evidentally, the need to do this
is a common misconception.
o minor formatting foo that may violate style(9) at the moment, but keeps the
diffs against my p4 tree smaller.
This does not solve the ugen gobbling things up problem, but the fixes
I have for that expose bugs in other parts of the tree...
variable. If set to "true" OF_getetheraddr() will now return the unique
MAC address stored in the "local-mac-address" property of the device's
OFW node if present and the host address/system default MAC address if
the node doesn't doesn't have such a property. If set to "false" the
host address will be returned for all devices like before this change.
This brings the behaviour of device drivers for NICs with OFW support/
FCode, i.e. dc(4) for on-board DM9102A on Sun machines, gem(4) and hme(4),
regarding "local-mac-address?" in line with NetBSD and Solaris.
The man pages of the respective drivers will be updated separately to
reflect this change.
- Remove OF_getetheraddr2() which was used as a stopgap in dc(4). Its
functionality is now part of OF_getetheraddr().
threads consuming the result of pfind() will not need to check for a NULL
credential pointer or other signs of an incompletely created process.
However, this also means that pfind() cannot be used to test for the
existence or find such a process. Annotate pfind() to indicate that this
is the case. A review of curent consumers seems to indicate that this is
not a problem for any of them. This closes a number of race conditions
that could result in NULL pointer dereferences and related failure modes.
Other related races continue to exist, especially during iteration of the
allproc list without due caution.
Discussed with: tjr, green
have already done this, so I have styled the patch on their work:
1) introduce a ip_newid() static inline function that checks
the sysctl and then decides if it should return a sequential
or random IP ID.
2) named the sysctl net.inet.ip.random_id
3) IPv6 flow IDs and fragment IDs are now always random.
Flow IDs and frag IDs are significantly less common in the
IPv6 world (ie. rarely generated per-packet), so there should
be smaller performance concerns.
The sysctl defaults to 0 (sequential IP IDs).
Reviewed by: andre, silby, mlaier, ume
Based on: NetBSD
MFC after: 2 months
connect to, re-check that the local UNIX domain socket hasn't been
closed while we slept, and if so, return EINVAL. This affects the
system running both with and without Giant over the network stack,
and recent ULE changes appear to cause it to trigger more
frequently than previously under load. While here, improve catching
of possibly closed UNIX domain sockets in one or two additional
circumstances. I have a much larger set of related changes in
Perforce, but they require more testing before they can be merged.
One debugging printf is left in place to indicate when such a race
takes place: this is typically triggered by a buggy application
that simultaenously connect()'s and close()'s a UNIX domain socket
file descriptor. I'll remove this at some point in the future, but
am interested in seeing how frequently this is reported. In the
case of Martin's reported problem, it appears to be a result of a
non-thread safe syslog() implementation in the C library, which
does not synchronize access to its logging file descriptor.
Reported by: mbr
