UDP/IP header, make sure that space is also allocated for the link
layer header. If an mbuf must be allocated to hold the UDP/IP header
(very likely), then this will avoid an additional mbuf allocation at
the link layer. This trick is also used by TCP and other protocols to
avoid extra calls to the mbuf allocator in the ethernet (and related)
output routines.
to check aperture size, avoiding hangs. Maintain the rest of the bits when
setting/unsetting ATTBASE. This essentially matches Linux's AGP driver as well.
PR: kern/70037
Submitted by: Mark Tinguely <tinguely at casselton dot net>
Obtained from: NetBSD
in the shutdown_final state if the RB_NOSYNC flag is set.
The specific motivation in this case is that a system panic in an
interrupt context results in a call to module_shutdown(), which
calls g_modevent(), which calls g_malloc(..., M_WAITOK), which
results in a second panic. While g_modevent() could be fixed to
not call malloc() for MOD_SHUTDOWN events (which it doesn't handle
in any case), it is probably also a good idea to entirely skip the
execution of the module shutdown handlers after a panic.
This may be a MFC candidate for RELENG_5.
shutdown_pre_sync state if the RB_NOSYNC flag is set. This is the
likely cause of hangs after a system panic that are keeping crash
dumps from being done.
This is a MFC candidate for RELENG_5.
MFC after: 3 days
systems that have overlapping regions specified in their sysresource
objects. This patch fixes ATA DMA and acpi_timer allocation for such
sysctems. It should eventually be moved to resource_list_add() if it is
a valid generalized approach. The minimal approach for 5.3 is:
"Loop through all current resources to see if the new one overlaps
any existing ones. If so, the old one always takes precedence and
the new one is adjusted (or rejected). We check for three cases:
1. Tail of new resource overlaps head of old resource: truncate the
new resource so it is contiguous with the start of the old.
2. New resource wholly contained within the old resource: error.
3. Head of new resource overlaps tail of old resource: truncate the
new resource so it is contiguous, following the old."
Tested by: Radek Kozlowski <radek_at_raadradd.com>
Discussed with: imp
MFC after: 4 days
of 0x3f2-0x3f5,0x3f7 the ports are not 7 bytes apart. This should fix
floppy probing on such systems. (We handle the case of adjusting for
a start of 0x3f2 -> 0x3f0 separately, although that code should still be
checked if there are still floppy problems for others.)
Tested by: Sarunas Vancevicius <vsarunas_at_eircom.net>
MFC after: 3 days
sockets are connection-oriented for the purposes of kqueue
registration. Since UDP sockets aren't connection-oriented, this
appeared to break a great many things, such as RPC-based
applications and services (i.e., NFS). Since jmg isn't around I'm
backing this out before too many more feet are shot, but intend to
investigate the right solution with him once he's available.
Apologies to: jmg
Discussed with: imp, scottl
Centralize the fdctl_wr() function by adding the offset in
the resource to the softc structure.
Bugfix: Read the drive-change signal from the correct place:
same place as the ctl register.
Remove the cdevsw{} related code and implement a GEOM class.
Ditch the state-engine and park a thread on each controller
to service the queue.
Make the interrupt FAST & MPSAFE since it is just a simple
wakeup(9) call.
Rely on a per controller mutex to protect the bioqueues.
Grab GEOMs topology lock when we have to and Giant when
ISADMA needs it. Since all access to the hardware is
isolated in the per controller thread, the rest of the
driver is lock & Giant free.
Create a per-drive queue where requests are parked while
the motor spins up. When the motor is running the requests
are purged to the per controller queue. This allows
requests to other drives to be serviced during spin-up.
Only setup the motor-off timeout when we finish the last
request on the queue and cancel it when a new request
arrives. This fixes the bug in the old code where the motor
turned off while we were still retrying a request.
Make the "drive-change" work reliably. Probe the drive on
first opens. Probe with a recal and a seek to cyl=1 to
reset the drive change line and check again to see if we
have a media.
When we see the media disappear we destroy the geom provider,
create a new one, and flag that autodetection should happen
next time we see a media (unless a specific format is configured).
Add sysctl tunables for a lot of drive related parameters.
If you spend a lot of time waiting for floppies you can
grab the i82078 pdf from Intels web-page and try tuning
these.
Add sysctl debug.fdc.debugflags which will enable various
kinds of debugging printfs.
Add central definitions of our well known floppy formats.
Simplify datastructures for autoselection of format and
call the code at the right times.
Bugfix: Remove at least one piece of code which would have
made 2.88M floppies not work.
Use implied seeks on enhanced controllers.
Use multisector transfers on all controllers. Increase
ISADMA bounce buffers accordingly.
Fall back to single sector when retrying. Reset retry count
on every successful transaction.
Sort functions in a more sensible order and generally tidy
up a fair bit here and there.
Assorted related fixes and adjustments in userland utilities.
WORKAROUNDS:
Do allow r/w opens of r/o media but refuse actual write
operations. This is necessary until the p4::phk_bufwork
branch gets integrated (This problem relates to remounting
not reopening devices, see sys/*/*/${fs}_vfsops.c for details).
Keep PC98's private copy of the old floppy driver compiling
and presumably working (see below).
TODO (planned)
Move probing of drives until after interrupts/timeouts work
(like for ATA/SCSI drives).
TODO (unplanned)
This driver should be made to work on PC98 as well.
Test on YE-DATA PCMCIA floppy drive.
Fix 2.88M media.
This is a MT5 candidate (depends on the bioq_takefirst() addition).
is an effective band-aid for at least some of the scheduler corruption seen
recently. The real fix will involve protecting threads while they are
inconsistent, and will come later.
Submitted by: julian
requires a recompile of netgraph users.
Also change the size of a field in the bluetooth code
that was waiting for the next change that needed recompiles so
it could piggyback its way in.
Submitted by: jdp, maksim
MFC after: 2 days
changes to the ATA driver cause a kernel crash, no fault of the ATA
code. Work is in progress to add the necessary feature to the sparc64
kernel and this commit will be backed out when it is complete. This
bandaid is being put in mostly in the interests of getting the first
release snapshot done and out the door.
Tested on: Ultra-10 exhibiting the insta-panic.
MFC: Real Soon
If the bioq is empty, NULL is returned. Otherwise the front element
is removed and returned.
This can simplify locking in many drivers from:
lock()
bp = bioq_first(bq);
if (bp == NULL) {
unlock()
return
}
bioq_remove(bp, bq)
unlock
to:
lock()
bp = bioq_takefirst(bq);
unlock()
if (bp == NULL)
return;
Since pmap_enter() calls pmap_invalidate_page(), which needs interrupts
enabled in the SMP case, we defer the disable to right before saving the
register context. This has been incorrect for about a year but caused no
real problems because the identity page never actually replaces a previously
mapped page and suspend/resume on SMP systems has been uncommon.
Tested by: sos
MFC after: 3 days
the ipfw KLD.
For IPFIREWALL_FORWARD this does not have any side effects. If the module
has it but not the kernel it just doesn't do anything.
For IPDIVERT the KLD will be unloadable if the kernel doesn't have IPDIVERT
compiled in too. However this is the least disturbing behaviour. The user
can just recompile either module or the kernel to match the other one. The
access to the machine is not denied if ipfw refuses to load.
have been unified with that of msleep(9), further refine the sleepq
interface and consolidate some duplicated code:
- Move the pre-sleep checks for theaded processes into a
thread_sleep_check() function in kern_thread.c.
- Move all handling of TDF_SINTR to be internal to subr_sleepqueue.c.
Specifically, if a thread is awakened by something other than a signal
while checking for signals before going to sleep, clear TDF_SINTR in
sleepq_catch_signals(). This removes a sched_lock lock/unlock combo in
that edge case during an interruptible sleep. Also, fix
sleepq_check_signals() to properly handle the condition if TDF_SINTR is
clear rather than requiring the callers of the sleepq API to notice
this edge case and call a non-_sig variant of sleepq_wait().
- Clarify the flags arguments to sleepq_add(), sleepq_signal() and
sleepq_broadcast() by creating an explicit submask for sleepq types.
Also, add an explicit SLEEPQ_MSLEEP type rather than a magic number of
0. Also, add a SLEEPQ_INTERRUPTIBLE flag for use with sleepq_add() and
move the setting of TDF_SINTR to sleepq_add() if this flag is set rather
than sleepq_catch_signals(). Note that it is the caller's responsibility
to ensure that sleepq_catch_signals() is called if and only if this flag
is passed to the preceeding sleepq_add(). Note that this also removes a
sched_lock lock/unlock pair from sleepq_catch_signals(). It also ensures
that for an interruptible sleep, TDF_SINTR is always set when
TD_ON_SLEEPQ() is true.
has only been partly initialized via newfs(8) so that it applies to both
UFS1 and UFS2.
Submitted by: "Xin LI" delphij at frontfree dot net
MFC: maybe?
lock is not held.
Rather than annotating that the lock is released after calls to
unp_detach() with a comment, annotate with an assertion.
Assert that the UNIX domain socket subsystem lock is not held when
unp_externalize() and unp_internalize() are called.
This provides greater context for the locking and allows us to avoid
locking the pcbinfo structure if not binding operations will take
place (i.e., already bound, connected, and no expliti sendto()
address).
drive is known to the configuration check also if it already has a geom.
Without this check several needless geoms are created and valid
configuration data was overwritten.
This change obsoletes the need for a separate geom to taste an
offered provider and the consumer doesn't need to be opened with the
exclusive bit set.
the driver to issue a bus reset more quickly than intended. We want to
*wait* if we find another SCB that could be the cause of this timeout,
not proceed to a bus reset.
Noticed by: kan
callers. These ioctls attempted to enable and disable the ACPI
interpreter at runtime. In practice, it is not possible to boot with
ACPI and then disable it on many systems and trying to do so can cause
crashes, interrupt storms, etc. Binary compatibility with userland is
retained.
MFC after: 2 days
ACPI_DEBUG case. Without this, use of allocated memory is unaligned and
causes a trap on ia64. Intel may fix this differently in a subsequent
release but this is adequate for now.
Submitted by: marcel
MFC after: 2 days
amd64 agp option here in order to let the pc98 kernel build
complete. This doesn't seem right, since there probably aren't
plans to build a pc98 amd64 box; however, it's not clear to me
how to get config to generate an opt_agp.h without an option
defined.
and preserves the ipfw ABI. The ipfw core packet inspection and filtering
functions have not been changed, only how ipfw is invoked is different.
However there are many changes how ipfw is and its add-on's are handled:
In general ipfw is now called through the PFIL_HOOKS and most associated
magic, that was in ip_input() or ip_output() previously, is now done in
ipfw_check_[in|out]() in the ipfw PFIL handler.
IPDIVERT is entirely handled within the ipfw PFIL handlers. A packet to
be diverted is checked if it is fragmented, if yes, ip_reass() gets in for
reassembly. If not, or all fragments arrived and the packet is complete,
divert_packet is called directly. For 'tee' no reassembly attempt is made
and a copy of the packet is sent to the divert socket unmodified. The
original packet continues its way through ip_input/output().
ipfw 'forward' is done via m_tag's. The ipfw PFIL handlers tag the packet
with the new destination sockaddr_in. A check if the new destination is a
local IP address is made and the m_flags are set appropriately. ip_input()
and ip_output() have some more work to do here. For ip_input() the m_flags
are checked and a packet for us is directly sent to the 'ours' section for
further processing. Destination changes on the input path are only tagged
and the 'srcrt' flag to ip_forward() is set to disable destination checks
and ICMP replies at this stage. The tag is going to be handled on output.
ip_output() again checks for m_flags and the 'ours' tag. If found, the
packet will be dropped back to the IP netisr where it is going to be picked
up by ip_input() again and the directly sent to the 'ours' section. When
only the destination changes, the route's 'dst' is overwritten with the
new destination from the forward m_tag. Then it jumps back at the route
lookup again and skips the firewall check because it has been marked with
M_SKIP_FIREWALL. ipfw 'forward' has to be compiled into the kernel with
'option IPFIREWALL_FORWARD' to enable it.
DUMMYNET is entirely handled within the ipfw PFIL handlers. A packet for
a dummynet pipe or queue is directly sent to dummynet_io(). Dummynet will
then inject it back into ip_input/ip_output() after it has served its time.
Dummynet packets are tagged and will continue from the next rule when they
hit the ipfw PFIL handlers again after re-injection.
BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as
they did before. Later this will be changed to dedicated ETHER PFIL_HOOKS.
More detailed changes to the code:
conf/files
Add netinet/ip_fw_pfil.c.
conf/options
Add IPFIREWALL_FORWARD option.
modules/ipfw/Makefile
Add ip_fw_pfil.c.
net/bridge.c
Disable PFIL_HOOKS if ipfw for bridging is active. Bridging ipfw
is still directly invoked to handle layer2 headers and packets would
get a double ipfw when run through PFIL_HOOKS as well.
netinet/ip_divert.c
Removed divert_clone() function. It is no longer used.
netinet/ip_dummynet.[ch]
Neither the route 'ro' nor the destination 'dst' need to be stored
while in dummynet transit. Structure members and associated macros
are removed.
netinet/ip_fastfwd.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code.
netinet/ip_fw.h
Removed 'ro' and 'dst' from struct ip_fw_args.
netinet/ip_fw2.c
(Re)moved some global variables and the module handling.
netinet/ip_fw_pfil.c
New file containing the ipfw PFIL handlers and module initialization.
netinet/ip_input.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code. ip_forward() does not longer require
the 'next_hop' struct sockaddr_in argument. Disable early checks
if 'srcrt' is set.
netinet/ip_output.c
Removed all direct ipfw handling code and replace it with the new
'ipfw forward' handling code.
netinet/ip_var.h
Add ip_reass() as general function. (Used from ipfw PFIL handlers
for IPDIVERT.)
netinet/raw_ip.c
Directly check if ipfw and dummynet control pointers are active.
netinet/tcp_input.c
Rework the 'ipfw forward' to local code to work with the new way of
forward tags.
netinet/tcp_sack.c
Remove include 'opt_ipfw.h' which is not needed here.
sys/mbuf.h
Remove m_claim_next() macro which was exclusively for ipfw 'forward'
and is no longer needed.
Approved by: re (scottl)
also generates a notify. Since we held the lock over this call, the
notify never got to run and the battery status read never returned.
Document this also.
Tested by: Maxim Maximov <mcsi_at_mcsi.pp.ru>
Approved by: re (scottl)
data packet is received from the mouse. In the case of many KVM's,
this avoids a bug in their mouse emulation that sends back incorrect
sync when you explicitly request a data packet from the mouse. Without
this change, you must force the driver into stock PS/2 mode or be flooded
with a never ending stream of "out of sync" messages on these KVMs.
Approved by: re
The ISA probe uses an identify routine to probe all slot locations from
1 to 14 that do not conflict with other allocated resources. This required
making aic7770.c part of the driver core when compiled as a module.
aic7xxx.c:
aic79xx.c:
aic_osm_lib.c:
Use aic_scb_timer_start() consistently to start the watchdog timer.
This removes a few places that verbatum copied the code in
aic_scb_timer_start().
During recovery processing, allow commands to still be queued to
the controller. The only requirement we have is that our recovery
command be queued first - something the code already guaranteed.
The only other change required to make this work is to prevent
timers from being started for these newly queued commands.
Approved by: re
- Add some commented out NICs from i386 GENERIC. Most of them look like they
would work but I'm not sure if they are endian-clean and can't test. There
was a report that sk(4) works on sparc64 but it doesn't look like it would
because it doesn't use busdma.
- Improve some of the descriptions of sparc64 specific devices.
There's no functional change, i.e. no added or deleted uncommented devices or
options, in this commit.
- Chase the split of pcm(4). This unbreaks LINT compiles.
- sc(4) basically works and a lot of its options should be supported.
- Add the creator and ofw_console drivers.
- vinum(4) should work, at least its module was turned on for sparc64 a while
ago.
- Don't build sio(4). Its EBus front-end was removed a while ago and the ISA
one hardly works. Use uart(4) instead, it's not perfect yet but works much
better.
only required to support probing of the Adaptec 284X VLB SCSI controller
which becomes visible in EISA space if you perform these writes. 284X
probing is moving to an ISA attachment.
parent rather than track resources locally. The original code
was incomplete in that it would only honor requests for resources
that already exist in its resource list. This prevented many ISA
identify routines from allocating temporary resources. Passing
the requests up to legacy's parent losing no functionality and
allows these requests to succeed.
Reviewed by: imp, jhb
Approved by: RE
have been rush hour...
While here, move COMPAT_IA32 from opt_global.h to opt_compat.h like on
amd64. Consequently, it's unsafe to use the option in pcb.h. We now
unconditionally have the ia32 specific registers in the PCB.
This commit is untested.
This was tested with a Netgear WG311v2 802.11b/g PCI card. Things
that were fixed:
- This chip has two memory mapped regions, one at PCIR_BAR(0) and the
other at PCIR_BAR(1). This is a little different from the other
chips I've seen with two PCI shared memory regions, since they tend
to have the second BAR ad PCIR_BAR(2). if_ndis_pci.c tests explicitly
for PCIR_BAR(2). This has been changed to simply fill in ndis_res_mem
first and ndis_res_altmem second, if a second shared memory range
exists. Given that NDIS drivers seem to scan for BARs in ascending
order, I think this should be ok.
- Fixed the code that tries to process firmware images that have been
loaded as .ko files. To save a step, I was setting up the address
mapping in ndis_open_file(), but ndis_map_file() flags pre-existing
mappings as an error (to avoid duplicate mappings). Changed this so
that the mapping is now donw in ndis_map_file() as expected.
- Made the typedef for 'driver_entry' explicitly include __stdcall
to silence gcc warning in ndis_load_driver().
NOTE: the Texas Instruments ACX111 driver needs firmware. With my
card, there were 3 .bin files shipped with the driver. You must
either put these files in /compat/ndis or convert them with
ndiscvt -f and kldload them so the driver can use them. Without
the firmware image, the NIC won't work.
- Trailing tab/space cleanup
- Remove spurious spaces between or before tabs
This change avoids touching files that Andre likely has in his working
set for PFIL hooks changes for IPFW/DUMMYNET.
Approved by: re (scottl)
Submitted by: Xin LI <delphij@frontfree.net>
prodstr may be NULL when fetched. For the default device description,
guard against this and return the numeric IDs instead when this
happens. For the matching routines, and consider NULL to not match
those entries that aren't NULL w/o calling strcmp.
Early patches by: Anders Hanssen
and can lead to two threads being granted exclusive access. Check that no one
has the same lock in exclusive mode before proceeding to acquire it.
The LK_WANT_EXCL and LK_WANT_UPGRADE bits act as mini-locks and can block
other threads. Normally this is not a problem since the mini locks are
upgraded to full locks and the release of the locks will unblock the other
threads. However if a thread reset the bits without obtaining a full lock
other threads are not awoken. Add missing wakeups for these cases.
PR: kern/69964
Submitted by: Stephan Uphoff <ups at tree dot com>
Very good catch by: Stephan Uphoff <ups at tree dot com>
address of the dirhash, rather than the first sizeof(struct dirhash
*) bytes of the structure (which, thankfully, seem to be constant).
Submitted by: Ted Unangst <tedu@zeitbombe.org>
MFC after: 2 weeks
- include <machine/../linux32/linux.h> instead of <machine/../linux/linux.h>
if building with the COMPAT_LINUX32 option.
- make minimal changes to the i386 linprocfs_docpuinfo() function to support
amd64. We return a fake CPU family of 6 for now.
with the COMPAT_LINUX32 option. This is largely based on the i386 MD Linux
emulations bits, but also builds on the 32-bit FreeBSD and generic IA-32
binary emulation work.
Some of this is still a little rough around the edges, and will need to be
revisited before 32-bit and 64-bit Linux emulation support can coexist in
the same kernel.
on AMD64, and the general case where the emulated platform has different
size pointers than we use natively:
- declare certain structure members as l_uintptr_t and use the new PTRIN
and PTROUT macros to convert to and from native pointers.
- declare some structures __packed on amd64 when the layout would differ
from that used on i386.
- include <machine/../linux32/linux.h> instead of <machine/../linux/linux.h>
if compiling with COMPAT_LINUX32. This will need to be revisited before
32-bit and 64-bit Linux emulation support can coexist in the same kernel.
- other small scattered changes.
This should be a no-op on i386 and Alpha.
"debug.mpsafevm" results in (almost) Giant-free execution of zero-fill
page faults. (Giant is held only briefly, just long enough to determine
if there is a vnode backing the faulting address.)
Also, condition the acquisition and release of Giant around calls to
pmap_remove() on "debug.mpsafevm".
The effect on performance is significant. On my dual Opteron, I see a
3.6% reduction in "buildworld" time.
- Use atomic operations to update several counters in vm_fault().
before dereferencing sotounpcb() and checking its value, as so_pcb
is protected by protocol locking, not subsystem locking. This
prevents races during close() by one thread and use of ths socket
in another.
unp_bind() now assert the UNP lock, and uipc_bind() now acquires
the lock around calls to unp_bind().
wait for system wires to disappear, do so (much more trivially) by
instead only checking for system wires of user maps and not kernel maps.
Alternative by: tor
Reviewed by: alc
- pipespace is now able to resize non-empty pipes; this allows
for many more resizing opportunities
- Backing is no longer pre-allocated for the reverse direction
of pipes. This direction is rarely (if ever) used, so this cuts the
amount of map space allocated to a pipe in half.
- Pipe growth is now much more dynamic; a pipe will now grow when
the total amount of data it contains and the size of the write are
larger than the size of pipe. Previously, only individual writes greater
than the size of the pipe would cause growth.
- In low memory situations, pipes will now shrink during both read
and write operations, where possible. Once the memory shortage
ends, the growth code will cause these pipes to grow back to an appropriate
size.
- If the full PIPE_SIZE allocation fails when a new pipe is created, the
allocation will be retried with SMALL_PIPE_SIZE. This helps to deal
with the situation of a fragmented map after a low memory period has
ended.
- Minor documentation + code changes to support the above.
In total, these changes increase the total number of pipes that
can be allocated simultaneously, drastically reducing the chances that
pipe allocation will fail.
Performance appears unchanged due to dynamic resizing.
for EBus, ISA and PCI, by compiling ofw_isa.c and ofw_pci_if.m unconditio-
nally. The correct way is to rewrite OF_decode_addr() in ofw_machdep.c in
a bus-neutral way. That's certainly possible but we unfortunately didn't
make it for FreeBSD 5.3.
Approved by: tmm
contained "sanity" checks that could be violated if another CPU modified
the pmap between the emulation trap and locking the pmap in
pmap_emulate_reference(). As a result, the pte could be inconsistent
with the access that caused the emulation trap. In such cases,
pmap_emulate_reference() now flushes the current CPU's TLB entry and
returns.
- Make pmap_changebit() an inline function, reducing object code size.
Don't count busy buffers before the initial call to sync() and
don't skip the initial sync() if no busy buffers were called.
Always call sync() at least once if syncing is requested. This
defers the "Syncing disks, buffers remaining..." message until
after the initial sync() call and the first count of busy
buffers. This backs out changes in kern_shutdown 1.162.
Print a different message when there are no busy buffers after the
initial sync(), which is now the expected situation.
Print an additional message when syncing has completed successfully
in the unusual situation where the work of syncing was done by
boot().
Uppercase one message to make it consistent with all of the other
kernel shutdown messages.
Discussed with: bde (in a much earlier form, prior to 1.162)
Reviewed by: njl (in an earlier form)
logical CPUs on a system to be used as a dedicated watchdog to cause a
drop to the debugger and/or generate an NMI to the boot processor if
the kernel ceases to respond. A sysctl enables the watchdog running
out of the processor's idle thread; a callout is launched to reset a
timer in the watchdog. If the callout fails to reset the timer for ten
seconds, the watchdog will fire. The sysctl allows you to select which
CPU will run the watchdog.
A sample "debug.leak_schedlock" is included, which causes a sysctl to
spin holding sched_lock in order to trigger the watchdog. On my Xeons,
the watchdog is able to detect this failure mode and break into the
debugger, which cannot otherwise be done without an NMI button.
This option does not currently work with sched_ule due to ule's push
notion of scheduling, similar to machdep.hlt_logical_cpus failing to
work with that scheduler.
On face value, this might seem somewhat inefficient, but there are a
lot of dual-processor Xeons with HTT around, so using one as a watchdog
for testing is not as inefficient as one might fear.
of PS_STRINGS. This is a no-op at present, but it will be needed when
running 32-bit Linux binaries on amd64 to ensure PS_STRINGS is in
addressable memory.
Without this, the device cannot detect the end of ethernet packets
whose size is a multiple of the USB packat size.
PR: kern/70474
Submitted by: Andrew Thompson <andy@fud.org.nz>
MFC after: 1 week
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
attempt to IPI other cpus when entering the debugger in order to stop
them while in the debugger. The default remains to issue the stop;
however, that can result in a hang if another cpu has interrupts disabled
and is spinning, since the IPI won't be received and the KDB will wait
indefinitely. We probably need to add a timeout, but this is a useful
stopgap in the mean time.
Reviewed by: marcel
and that can be used as an identify function for all kinds of busses on a
certain platform. Expect for sparc64 these are only stubs right now. [1]
- For sparc64, add code to its uart_cpu_identify() for registering the on-
board ISA UARTs and their resources based on information obtained from
Open Firmware.
It would be better if this would be done in the OFW ISA code. However, due
to the common FreeBSD ISA code and PNP-IDs not always being present in the
properties of the ISA nodes there seems to be no good way to implement that.
Therefore special casing UARTs as the sole really relevant ISA devices on
sparc64 seemed reasonable. [2]
Approved by: marcel
Discussed with: marcel [1], tmm [2]
Tested by: make universe
without Open Firmware directly instead of using OF_getetheraddr(). This is
a bit painful though, as the MAC address is contained in the NA field of
the VPD of the EBus bridge, which is is another function of the same chip.
To make it worse, the VPD of the EBus bridge can't be accessed via the PCI
capability pointer but has to be digged out from the Boot PROM and has a
non-standard format.
The PCI VPD struct and macros used here should be part of the FreeBSD PCI
code nevertheless.
Approved by: tmm
Based on: NetBSD
Tested with: Sun X1032A (hme(4)-isp(4)-combo card) on alpha and i386
o reprobe children when a new driver is added to uhub
o fix the usbd_probe_and_attach to set the ivars to a malloc'd area, as well
as freeing the ivars on child destruction.
o Don't delete children that don't attach. Evidentally, the need to do this
is a common misconception.
o minor formatting foo that may violate style(9) at the moment, but keeps the
diffs against my p4 tree smaller.
This does not solve the ugen gobbling things up problem, but the fixes
I have for that expose bugs in other parts of the tree...
variable. If set to "true" OF_getetheraddr() will now return the unique
MAC address stored in the "local-mac-address" property of the device's
OFW node if present and the host address/system default MAC address if
the node doesn't doesn't have such a property. If set to "false" the
host address will be returned for all devices like before this change.
This brings the behaviour of device drivers for NICs with OFW support/
FCode, i.e. dc(4) for on-board DM9102A on Sun machines, gem(4) and hme(4),
regarding "local-mac-address?" in line with NetBSD and Solaris.
The man pages of the respective drivers will be updated separately to
reflect this change.
- Remove OF_getetheraddr2() which was used as a stopgap in dc(4). Its
functionality is now part of OF_getetheraddr().
threads consuming the result of pfind() will not need to check for a NULL
credential pointer or other signs of an incompletely created process.
However, this also means that pfind() cannot be used to test for the
existence or find such a process. Annotate pfind() to indicate that this
is the case. A review of curent consumers seems to indicate that this is
not a problem for any of them. This closes a number of race conditions
that could result in NULL pointer dereferences and related failure modes.
Other related races continue to exist, especially during iteration of the
allproc list without due caution.
Discussed with: tjr, green
have already done this, so I have styled the patch on their work:
1) introduce a ip_newid() static inline function that checks
the sysctl and then decides if it should return a sequential
or random IP ID.
2) named the sysctl net.inet.ip.random_id
3) IPv6 flow IDs and fragment IDs are now always random.
Flow IDs and frag IDs are significantly less common in the
IPv6 world (ie. rarely generated per-packet), so there should
be smaller performance concerns.
The sysctl defaults to 0 (sequential IP IDs).
Reviewed by: andre, silby, mlaier, ume
Based on: NetBSD
MFC after: 2 months
connect to, re-check that the local UNIX domain socket hasn't been
closed while we slept, and if so, return EINVAL. This affects the
system running both with and without Giant over the network stack,
and recent ULE changes appear to cause it to trigger more
frequently than previously under load. While here, improve catching
of possibly closed UNIX domain sockets in one or two additional
circumstances. I have a much larger set of related changes in
Perforce, but they require more testing before they can be merged.
One debugging printf is left in place to indicate when such a race
takes place: this is typically triggered by a buggy application
that simultaenously connect()'s and close()'s a UNIX domain socket
file descriptor. I'll remove this at some point in the future, but
am interested in seeing how frequently this is reported. In the
case of Martin's reported problem, it appears to be a result of a
non-thread safe syslog() implementation in the C library, which
does not synchronize access to its logging file descriptor.
Reported by: mbr
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
Note: mutexes are initialized in the softc for this driver, but the
locking appears inadequate to allow Giant-free operation.
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
Note: this driver does declare and occasionally reference mutexes,
but I believe not nearly enough to provide safety.
code was adjusting twice for the instruction pointer indicating
the *next* instruction to execute. The aic79xx driver had a similar
bug, but was fixed some time ago.
check whether p_ucred is NULL or not in pfs_getattr() before
dereferencing the credential, and return ENOENT if there wasn't one.
This is a symptom of a larger problem, wherein pfind() can return
references to incompletely initialized processes, and we instead ought
to not return them, or check the process state before acting on the
process.
Reported by: kris
Discussed with: tjr, others
algorithm built into the map entry splay tree. This replaces the
first_free hint in struct vm_map with two fields in vm_map_entry:
adj_free, the amount of free space following a map entry, and
max_free, the maximum amount of free space in the entry's subtree.
These fields make it possible to find a first-fit free region of a
given size in one pass down the tree, so O(log n) amortized using
splay trees.
This significantly reduces the overhead in vm_map_findspace() for
applications that mmap() many hundreds or thousands of regions, and
has a negligible slowdown (0.1%) on buildworld. See, for example, the
discussion of a micro-benchmark titled "Some mmap observations
compared to Linux 2.6/OpenBSD" on -hackers in late October 2003.
OpenBSD adopted this approach in March 2002, and NetBSD added it in
November 2003, both with Red-Black trees.
Submitted by: Mark W. Krentel
* Serialize access to the sysctl routines and the notify handler
* Assert that the sx lock is held in any functions they call.
* Note that recursively calling to re-enable the hotkeys is sub-optimal.
* Remove the interrupt wrapper that locked Giant and call the handler
directly. Mark the handler as MPSAFE.
* Don't attempt to detect if a handler is installed. Leave that to the
bus_alloc_resource() function.
* Serialize operations in acpi_video_bind_outputs(), acpi_video_detach(),
acpi_video_notify_handler(), acpi_video_power_profile(), and the sysctls.
The main goal is to protect the shared device list and prevent conflicting
settings.
* Add assertions that the sx lock is held in the leaf functions.
* Restructure the event handling path. acpi_tz_thread() now calls
acpi_tz_timeout() any time an event occurs. acpi_tz_timeout() checks
the flags and calls acpi_tz_power_profile(), acpi_tz_establish(), and
acpi_tz_monitor() as appropriate. Notifies only do a wakeup and let
acpi_tz_thread() do the actual work. This path is cleaner and allows
locking since the call path is now always a D.A.G.
* Add the acpi_tz_signal() function to set flags and wake the thread.
* Remove the tz_tmp_updating flag since calls are serialized by
acpi_tz_thread().
* Remove Giant locking.
* Serialize acpi_pwr_switch_consumer() and acpi_pwr_wake_enable().
* Make acpi_pwr_switch_consumer() have a single exit point.
* Add assertions to the leaf functions they call.
* Fix a memory leak in acpi_pwr_deregister_consumer(). However, it is
currently ifdefed out so this code was unused.
* Serialize access to acpi_pci_link_config(), acpi_pci_find_prt(),
acpi_pci_link_route(), and acpi_pci_link_resume().
* Add lock assertions to all functions called by them.
* Serialize notifying the user in acpi_lid_notify_status_changed(). This
way multiple lid events occur in order.
* Add an initialization pass to get the lid status at boot-time. This
pass does not notify any apps but gets the initial status.
* Use the common serialization macros instead of rolling our own.
* Increase the coverage of the lock in EcSpaceHandler() to cover the entire
loop to avoid dropping the lock when reading more than one byte.
* Serialize ops in acpi_cmbat_notify_handler(), acpi_cmbat_ioctl(),
acpi_cmbat_init_battery(), and acpi_cmbat_get_battinfo().
* Get the softc directly in acpi_cmbat_get_total_battinfo() rather than
build an array of them.
* Don't queue a _BIF query after receiving a notify. Since we clear the
timespec, a _BIF query will be done in the context of the next caller.
* Add asserts to leaf functions that operate on shared data.
* Remove the bst/bif updating flags now that we hold the lock over the
full query.
* Explain various comments in more detail.
* Serialize acpi_battery_get_battdesc(), acpi_battery_register(), and
acpi_battery_remove().
* Assert that the sx lock is held in acpi_batteries_init().
* Remove check for device_get_softc() returning NULL.
* Serialize notification of acline changes in acpi_acad_get_status().
* Remove the initializing flag. With the locking, we don't need to
push off requests for the acline before initialization is done.
* Don't check device_get_softc(), it can't return NULL.
* Serialize calls to acpi_alloc_resource(), acpi_release_resource(),
acpi_Enable(), acpi_Disable(), and acpi_debug_sysctl().
* Acquire the ACPI mutex in acpi_register_ioctl(), acpi_deregister_ioctl(),
and acpiioctl().
* Acquire the mutex while disabling subsequent requests to enter a
sleep state in acpi_SetSleepState().
* Be sure to re-enable sleep requests and don't run resume methods when
the current request fails.
* Don't check if sleep requests are disabled in the ACPIIO_SETSLPSTATE
ioctl. acpi_SetSleepState() does this for us.
* Remove the acquisition of Giant from the struct cdevsw.
* Remove the ACPI_USE_THREADS option.
* Add and comment our locking primitives. The mutex primitives use a
a static mutex and the serialization ones use a static sx lock. A global
acpi_mutex is used for access to global resources (i.e., writes to the
SMI_CMD register.)
* Remove 4.x compat defines.
Since the only thing truly unique about a prison is it's ID, I figured
this would be the most granular way of handling this.
This commit makes the following changes:
- Adds tokenizing and parsing for the ``jail'' command line option
to the ipfw(8) userspace utility.
- Append the ipfw opcode list with O_JAIL.
- While Iam here, add a comment informing others that if they
want to add additional opcodes, they should append them to the end
of the list to avoid ABI breakage.
- Add ``fw_prid'' to the ipfw ucred cache structure.
- When initializing ucred cache, if the process is jailed,
set fw_prid to the prison ID, otherwise set it to -1.
- Update man page to reflect these changes.
This change was a strong motivator behind the ucred caching
mechanism in ipfw.
A sample usage of this new functionality could be:
ipfw add count ip from any to any jail 2
It should be noted that because ucred based constraints
are only implemented for TCP and UDP packets, the same
applies for jail associations.
Conceptual head nod by: pjd
Reviewed by: rwatson
Approved by: bmilekic (mentor)
to avoid later changes before pmap_enter() and vm_fault_prefault()
has completed.
Simplify deadlock avoidance by not blocking on vm map relookup.
In collaboration with: alc
subset ("compatible", "device_type", "model" and "name") of the standard
properties in drivers for devices on Open Firmware supported busses. The
standard properties "reg", "interrupts" und "address" are not covered by
this interface because they are only of interest in the respective bridge
code. There's a remaining standard property "status" which is unclear how
to support properly but which also isn't used in FreeBSD at present.
This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
This in turn allows to simplify and remove code-duplication in drivers for
devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
drivers for their children to use the ofw_bus kobj-interface. The IVAR-
interfaces of the Central, EBus and FHC are entirely replaced by this. The
PCI bus driver used its own kobj-interface and now also uses the ofw_bus
one. The IVARs special to the SBus, e.g. for retrieving the burst size,
remain.
Beware: this causes an ABI-breakage for modules of drivers which used the
IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
recompiled.
The style-inconsistencies introduced in some of the bus drivers will be
fixed by tmm@ in a generic clean-up of the respective drivers later (he
requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
use the ofw_bus kobj-interface. This invloves removing the IVARs related
to the "reg" property which were unused and a leftover from the NetBSD
origini of the code. There's no ABI-breakage caused by this because none
of these driver are currently built as modules.
There are other powerpc bus drivers which can be converted to the ofw_bus
kobj-interface, e.g. the PCI bus driver, which should be done together
with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
advantage of the ofw_bus kobj-interface and simplify them a bit.
Reviewed by: grehan, tmm
Approved by: re (scottl)
Discussed with: tmm
Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
pf_cksum_fixup() was called without last argument from
normalization, also fixup checksum when random-id modifies ip_id.
This would previously lead to incorrect checksums for packets
modified by scrub random-id.
(Originally) Submitted by: yongari
The first one was going to 'dropfrag', which unlocks the IPQ, before the lock
was aquired; The second one doing a unlock and then a 'goto dropfrag' which
led to a double-unlock.
Tripped over by: des
migration. Use this in sched_prio() and sched_switch() to stop us from
migrating threads that are in short term sleeps or are runnable. These
extra migrations were added in the patches to support KSE.
- Only set NEEDRESCHED if the thread we're adding in sched_add() is a
lower priority and is being placed on the current queue.
- Fix some minor whitespace problems.
