Commit Graph

192137 Commits

Author SHA1 Message Date
Xin LI
249ddb42f6 MFC r270195:
Illumos issue:
    5045 use atomic_{inc,dec}_* instead of atomic_add_*

MFC after:	2 weeks
2014-08-20 21:44:48 +00:00
Jilles Tjoelker
dd6d480a3e sh: Remove two redundant (uintmax_t) casts.
Submitted by:	jmallett
2014-08-20 20:15:43 +00:00
Xin LI
2bcc37f99c MFV r270193:
Illumos issues:
    5042 stop using deprecated atomic functions

MFC after:	2 weeks
2014-08-20 18:29:18 +00:00
Hiroki Sato
d292a6c795 Recover sin6_scope_id of gateway addresses in riprecv() by using the if_index
where a RIP packet was received.  This fixes a bug which prevented gateway
addresses in fe80::/64 from being added.
2014-08-20 17:27:15 +00:00
Stefan Eßer
5a0fb8c8d6 The conversion tools have been further improved and some erroneous
conversions have been detected and fixed.

It is now possible to add options after the encoding in the parameter
list for convert-keymap.pl. This is currently used to selectively
enable interpretation of the ISO8859-1 currency symbol as the Euro
sign found in ISO5589-15, or to add a Yen symbol in place of '\' for
specific Japanese keyboards. The option are appended to the parameter
list, as in e.g. "convert-keymap.pl german.iso.kbd ISO5589-1 EURO".

The options are appended to the encoding in the form "+EURO" or "+YEN"
in KBDFILES.map, to keep the meaning of the columns intact.

MFC after:	3 days
2014-08-20 17:07:41 +00:00
Alan Somers
81ade99c2c Misc fixes suggested by Coverity.
sbin/devd/tests/client_test.c
	* In the event that popen fails, don't dereference its return value.
	* Fix array overwrite in the stream and seqpacket tests.
	* Close sockets at the end of successful ATF tests.

Reported by:	Coverity scan
CID:		1232019, 1232020, 1232029, 1232030
MFC after:	1 week
Sponsored by:	Spectra Logic
2014-08-20 17:04:49 +00:00
Luiz Otavio O Souza
801abb3eba Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems:
. interrupt storm detected on "intr70:"; throttling interrupt source;

  . Added access serialization on iicbus_transfer(), previously there was
    no such protection and a new transfer could easily confuse the
    controller;

  . Add error checkings (i.e. stop the transfer when a error is detected
    and do _not_ overwrite the previous error);

  . On command done interrupt do not assume that the transfer was finished
    sucessfully as we will receive the command done interrupt even after
    errors;

  . Simplify the FIFO handling;

  . Reset the FIFO between the transfers as the FIFO may contain data from
    the last (failed) transfer;

  . Fix the iicbus speed for AM335x, which in turn will make better use of
    the I2C noise filter (set to one internal clock cycle);

  . Move the read and write handler to ithread instead of notifying the
    requesting thread with wakeup(9);

  . Fix the comments based on OMAP4 TRM.

The above changes allows me to read the EDID from my HDMI monitor on BBB
with gonzo's patches to support TDA19988 (which does 128 bytes reads) and
repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus.

Phabric:	D465
2014-08-20 17:02:37 +00:00
Stefan Eßer
fdd869bd8a Another rpund of fixes, after checking keymaps for plausibility and with
several updates to the converter tools. There is now support for hybrid
source keymaps, which e.g. use ISO8859-1 (not -15) but still provide an
Euro key (on the "E" key). ISO8859-1 currency symbols on other keys are
still converted to that character, not the Euro sign. A similar hack was
applied to the Japanese keyboards to add the Yen key, that could not be
expressed in SYSCONS.

Several modifications have been applied after the conversion (removal of
unused accents tables, some reformatting, exchange of a few key symbols).

The German keymap (de.kbd) is now using deadkeys only for those keys,
that behave that way under Windows. There are now ".acc" and ".noacc"
variants, which use deadkeys vs. nodeadkeys for all accent keys.

I'm still in the process of comparing keymaps that existed in different
encodings in SYSCONS. These are generally translated slightly differently,
either because of mistakes, or because of different preferences, or due
to limitations of the respective encoding.

MFC after:	3 days
2014-08-20 17:00:47 +00:00
Alan Somers
e594026d6d Numerous small fixes, mostly suggested by Coverity.
tests/sys/kern/unix_seqpacket_test.c
	* Remove a duplicate error check in mk_pair_of_sockets
	* Always close sockets in the success path of ATF test cases.  Don't
	  bother with the error paths, because those are mostly assertions
	  anyway.  Most of these socket leaks were reported by Coverity.
	  All of them are harmless, because each ATF test case runs in its
	  own process.
	* Fix the len argument to send in shutdown_send and
	  shutdown_send_sigpipe.  The old version was using sizeof a pointer
	  instead of sizeof the char array.  Reported by Coverity.
	* Change a few ATF_CHECK to ATF_REQUIRE if the test can't reasonably
	  continue past a failure.

Reported by:	Coverity Scan
CID:		1229995, 1229991, 1229988, 1229994, 1229989, 1229992
CID:		1229993, 1229990, 1229984, 1229967, 1230005, 1229977
CID:		1229966, 1230004, 1229976
MFC after:	1 week
Sponsored by:	Spectra Logic
2014-08-20 16:59:33 +00:00
Davide Italiano
d0091d6625 Make Bruce happy removing the "LL abomination" from time.h
It's not necessary in all the three instances because
they already have the correct type on all the supported
arches.

Requested by:	bde
2014-08-20 16:32:02 +00:00
John Baldwin
e6e574516a Add kernel modules for si(4), wds(4), and wl(4). 2014-08-20 16:09:05 +00:00
John Baldwin
cef60f1868 Unexpand TAILQ_FOREACH(). 2014-08-20 16:07:56 +00:00
John Baldwin
669eac89c5 Fix build of si(4) and enable it in LINT on amd64 and i386. 2014-08-20 16:07:17 +00:00
John Baldwin
64d6de263b Bump MAXCPU on amd64 from 64 to 256. In practice APIC only permits 255
CPUs (IDs 0 through 254).  Getting above that limit requires x2APIC.

MFC after:	1 month
2014-08-20 16:06:24 +00:00
John Baldwin
b45968a8ea Bump the default size of cpuset_t masks in userland from 128 bits to 256.
This should not be an ABI change since the various public APIs that use
cpusets all include an explicit size parameter in addition to the cpuset
parameter.

MFC after:	1 week
2014-08-20 16:05:15 +00:00
Davide Italiano
b40ea294f9 Replace dev_clone with cdevpriv(9) KPI in audit_pipe code.
This is (yet another) step towards the removal of device
cloning from our kernel.

CR:	https://reviews.freebsd.org/D441
Reviewed by:	kib, rwatson
Tested by:	pho
2014-08-20 16:04:30 +00:00
Enji Cooper
b6130f8189 Add ${LIBC} to DPADD to fix "make checkdpadd"
Phabric: D632
Approved by: jmmv (mentor)
MFC after: 2 weeks
2014-08-20 15:43:26 +00:00
Pedro F. Giffuni
6804aa1b68 Add missing break.
CID:	603368
2014-08-20 14:58:25 +00:00
Roger Pau Monné
073bf9dd70 pci: make MSI(-X) enable and disable methods of the PCI bus
Make the functions pci_disable_msi, pci_enable_msi and pci_enable_msix
methods of the newbus PCI bus. This code should not include any
functional change.

Sponsored by: Citrix Systems R&D
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D354

dev/pci/pci.c:
 - Convert the mentioned functions to newbus methods.
 - Fix the callers of the converted functions.

sys/dev/pci/pci_private.h:
dev/pci/pci_if.m:
 - Declare the new methods.

dev/pci/pcivar.h:
 - Add helpers to call the newbus methods.

ofed/include/linux/pci.h:
 - Add define to prevent the ofed version of pci_enable_msix from
   clashing with the FreeBSD native version.
2014-08-20 14:57:20 +00:00
Edward Tomasz Napierala
5e8c3d974e Remove useless - and buggy, it resulted in spurious warnings in logs - code.
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-08-20 13:54:27 +00:00
Edward Tomasz Napierala
543bed9345 Add description for the "automounted" mount flag.
Reviewed by:	emaste@
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-08-20 13:52:47 +00:00
Edward Tomasz Napierala
2f438a99cd Rework ".." lookup; previous one failed to properly busy the mountpoint.
Reviewed by:	kib@
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-08-20 13:46:51 +00:00
Adrian Chadd
ebb1240823 After much toying around with this AMRR initial rate stuff,
I've decided that for 11n rates it's best to start (very) low and work
our way up.

So, from now on, the initial rate for AMRR 11n is MCS4.
It doesn't try MCS12 or MCS20 - at low signal strengths those don't
work very well at all.

AMRR will step the rate control up over time if things work out better.

Tested:

* Intel 5100
* Intel 5300 (using local diffs to test out 3x3 stream support)
2014-08-20 09:10:03 +00:00
Konstantin Belousov
29d03af1e4 Do not busy the UFS mount point inside VOP_RENAME(). The
kern_renameat() already starts write on the mp, which prevents
parallel unmount from proceed.  Busying mp after vn_start_write()
deadlocks the unmount.

Reported and tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-08-20 08:15:23 +00:00
Konstantin Belousov
4ce90426e0 Correct the test for condition to suspend UFS filesystem during
unmount.  There is no need to suspend read-only filesystem, while we
need suspension on modificable mount point.

Reported by:	rwatson
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-08-20 08:13:03 +00:00
Konstantin Belousov
3165194c6b Increase max number of physical segments on amd64 to 63.
Eventually, the vmd_segs of the struct vm_domain should become bitset
instead of long, to allow arbitrary compile-time selected maximum.

Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-08-20 08:07:08 +00:00
Konstantin Belousov
14fb217784 Add arch-specific macro SFBUF_PHYS_DMAP(), which should translate the
physical address of the page to direct map address, in case
SFBUF_OPTIONAL_DIRECT_MAP returns true.  The case of PowerPC AIM
64bit, where the page physical address is identical to the direct map
address, is accidental.

Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
2014-08-20 08:02:38 +00:00
Stefan Eßer
0ee7262a72 Fix conversion errors leading to malformed keymap files.
MFC after:	3 days
2014-08-20 07:48:09 +00:00
Stefan Eßer
83886c28c9 Fix further conversion errors found while testing the converted keymaps.
MFC after:	3 days
2014-08-20 07:46:28 +00:00
Xin LI
48aeb6148d 5045 use atomic_{inc,dec}_* instead of atomic_add_*
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>

illumos/illumos-gate@1a5e258f54
2014-08-20 06:22:59 +00:00
Xin LI
d7c2a73f1d 5043 remove deprecated atomic functions' prototypes
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>

illumos/illumos-gate@6ed9368a13
2014-08-20 06:20:06 +00:00
Xin LI
ecc3be1fdf 5042 stop using deprecated atomic functions
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author:	Josef 'Jeff' Sipek <josef.sipek@nexenta.com>

illumos/illumos-gate@75d94465db
2014-08-20 06:15:53 +00:00
Kevin Lo
51a25d3479 If eapol packets are sent at the lowest rate, key negotiation will
become more reliable.

Submitted by:	Akinori Furukoshi <moonlightakkiy at yahoo dot ca>
2014-08-20 01:32:04 +00:00
Kevin Lo
d4bcd25553 Add the D-Link DWA-125 rev D1.
Tested by myself.
2014-08-20 01:26:27 +00:00
Ian Lepore
fad3f0e44f Don't stop other legs of a parallel build due to a failure in make_check.
The whole point is to see if there's any failure, which is handled by
building a newer version of make.
2014-08-20 00:33:37 +00:00
Xin LI
4c75e22659 Add zdb into rescue environment.
On amd64, this would increase the binary size by 1.1MiB and
make it possible to examine zpool status offline, useful for
recovery and diagnostic purposes.

Submitted by:	sef
Obtained from:	FreeNAS
MFC after:	2 weeks
2014-08-20 00:14:41 +00:00
Bryan Drewery
4a185fa6c9 Avoid showing stale errors when nmount(2) fails.
Sometimes nmount(2) will fail without setting errmsg. The previous (ignored)
error would then be shown as the reason for the failed call if the next
nmount(2) also fails without [ENOENT,ENOTSUP].

An example is when there is a tmpfs mounted with -o size. vfs_filteropt() adds
'size' as an error in errmsg due to 'size' not being in tmpfs_updateopts. Then
tmpfs_mount returns [ENOTSUP] from nmount(2), which is then ignored. The next
call may race with an unmount causing an invalid [EINVAL] that then does log an
error, with the tmpfs errmsg.

The race itself is a separate issue to fix as it is expected to have an
[ENOENT] returned instead.

In this example the mount being shown is actually nullfs, not tmpfs that the
error is from.

  mountd[740]: can't delete exports for /poudriere/data/.m/exp-head-commit-test-devel/04/.npkg: Invalid argument mount option <size> is unknown

It should only show:

  mountd[740]: can't delete exports for /poudriere/data/.m/exp-head-commit-test-devel/04/.npkg: Invalid argument

MFC after:	2 weeks
2014-08-19 21:04:31 +00:00
Bryan Drewery
11cb1b138e Add recent DragonFly releases.
Submitted by:	Zach Crownover <zachary.crownover@gmail.com>
MFC after:	1 week
2014-08-19 20:35:09 +00:00
Enji Cooper
86e9f36ea6 Add LIBMD and LIBUTIL to DPADD to fix "make checkdpadd"
Approved by: jmmv (mentor)
MFC after: 5 days
Phabric: D633
PR: 192763
2014-08-19 18:47:47 +00:00
Enji Cooper
b7ca81625e Add missing libraries to DPADD; sort DPADD so DPADD and LDADD match up
This fixes "make checkdpadd"

Approved by: jmmv (mentor)
MFC after: 2 weeks
Phabric: D630
PR: 192765
2014-08-19 18:31:20 +00:00
Enji Cooper
d052a806a0 Fix typo (LIBLDNSADD -> LIBLDNS) to fix "make checkdpadd"
X-MFC with: r269648
Phabric: D634
Approved by: jmmv (mentor)
2014-08-19 18:27:43 +00:00
Alexander Motin
2ac1d5afc8 Fix lock recursion on LUN shutdown, introduced on r269497.
MFC after:	3 days
2014-08-19 17:04:18 +00:00
Bryan Drewery
f874ca3efd Bump __FreeBSD_version after r269489 so ports can use it. 2014-08-19 15:47:51 +00:00
Bryan Drewery
54d8c5d5af Regen after r270171 2014-08-19 15:46:40 +00:00
Hans Petter Selasky
74b0cb1a24 Add missing WITHOUT_CUSE file. 2014-08-19 15:40:26 +00:00
Bryan Drewery
6855730b5c Use bsd.lib.mk here as all other csu Makefiles do.
This effectively reverts r124752.

There's no reason this should be different. It resulted in needing NO_PIE in
the original opt-out NO_PIE commit as this was not using the proper framework.

Reported by:	peter
2014-08-19 15:30:56 +00:00
Bryan Drewery
f1d82c3e68 Regen after r270168 2014-08-19 15:09:24 +00:00
Bryan Drewery
5608fd23c2 Revert r267233 for now. PIE support needs to be reworked.
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
   build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
   where it never would work anyhow, such as csu or loader. This suggests
   there may be better ways of adding support to the tree. Many of these
   cases can be fixed such that -fPIE will work but there is really no
   reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
   really building libraries but have been using bsd.prog.mk because the code
   is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
   been needed.

We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.

Reported by:	kib
2014-08-19 15:04:32 +00:00
Kevin Lo
7e1c22c476 Sort ASUS section and add USB device ID of ASUS USB-AC51. 2014-08-19 09:02:58 +00:00
Warner Losh
36be38b5f4 Add support for -X, which installs the native cross tools for qemu
operations. Doesn't install qemu nor setup the jail, yet.
2014-08-19 03:51:10 +00:00