(including pathname, gname, uname) be stored in UTF-8. This usually
doesn't cause problems on FreeBSD because the "C" locale on FreeBSD
can convert any byte to Unicode/wchar_t and from there to UTF-8. In
other locales (including the "C" locale on Linux which is really
ASCII), you can get into trouble with pathnames that cannot be
converted to UTF-8.
Libarchive's pax writer truncated pathnames and other strings at the
first nonconvertible character. (ouch!) Other archivers have worked
around this by storing unconvertible pathnames as raw binary, a
practice which has been sanctioned by the Austin group. However,
libarchive's pax reader would segfault reading headers that weren't
proper UTF-8. (ouch!) Since bsdtar defaults to pax format, this
affects bsdtar rather heavily.
To correctly support the new "hdrcharset" header that is going into
SUS and to handle conversion failures in general, libarchive's pax reader
and writer have been overhauled fairly extensively. They used to do
most of the pax header processing using wchar_t (Unicode); they now do
most of it using char so that common logic applies to either UTF-8 or
"binary" strings.
As a bonus, a number of extraneous conversions to/from wchar_t have
been eliminated, which should speed things up just a tad.
Thanks to: Bjoern Jacke for originally reporting this to me
Thanks to: Joerg Sonnenberger for noting a bad typo in my first draft of this
Thanks to: Gunnar Ritter for getting the standard fixed
MFC after: 5 days
not exist. /etc/rc.d/mixer tried to restore non-existent recording
source because /var/var/db/mixer*-state contains '=rec' for example.
- Remove hardcoded mixer2 and mixer3 and do the right thing.
- Replace getopt(3) with hand-rolled option parser. It was not able
to handle 'mixer -rec mic' although it is a valid command.
- Make '-s' and '-S' mutualy exclusive as mixer(8) says.
- Do not re-read recording source unless it has been modified.
rely on a deprecated value to set the default. This is also
related to a longer-term goal of setting the default block
size based on format and possibly other factors, which makes
it a bad idea to tie this to a published constant.
new interface. Mark the functions that are going away in
libarchive 3.0.
In particular, archive_version_string() now computes the
string rather than assuming that it will be created by the
build infrastructure. Eventually, this will allow some
simplification of the build infrastructure.
* There are now only two public version identifiers: "number" is
a single integer that combines Major/minor/release in a single
value of the form Mmmmrrr. This is easy to compare against for
checking feature support. "string" is a displayable text string
of the form "libarchive M.mm.rr".
* The number is present both as a macro (version of the installed header)
and a function (version of the shared library). The string form
is available only as a function.
* Retain the older version definitions for now, but mark them all
as deprecated, to disappear in libarchive 3.0 (whenever that happens).
* Rework the various deprecation conditionals to use ARCHIVE_VERSION_NUMBER.
An ancillary goal is to reduce the number of @...@ substitutions that
are required. Someday, I might even be able to avoid build-time
processing of archive.h entirely.
Remove the entirely pointless symbolic constant
and sizeof(unsigned char). (The constant
here is doubly wrong, since not only does
it obscure a basic format constant, it was
never intended to be a tar-specific value,
so could conceivably be changed at some point
in the future.)
- Add a new intr_event method ie_assign_cpu() that is invoked when the MI
code wishes to bind an interrupt source to an individual CPU. The MD
code may reject the binding with an error. If an assign_cpu function
is not provided, then the kernel assumes the platform does not support
binding interrupts to CPUs and fails all requests to do so.
- Bind ithreads to CPUs on their next execution loop once an interrupt
event is bound to a CPU. Only shared ithreads are bound. We currently
leave private ithreads for drivers using filters + ithreads in the
INTR_FILTER case unbound.
- A new intr_event_bind() routine is used to bind an interrupt event to
a CPU.
- Implement binding on amd64 and i386 by way of the existing pic_assign_cpu
PIC method.
- For x86, provide a 'intr_bind(IRQ, cpu)' wrapper routine that looks up
an interrupt source and binds its interrupt event to the specified CPU.
MI code can currently (ab)use this by doing:
intr_bind(rman_get_start(irq_res), cpu);
however, I plan to add a truly MI interface (probably a bus_bind_intr(9))
where the implementation in the x86 nexus(4) driver would end up calling
intr_bind() internally.
Requested by: kmacy, gallatin, jeff
Tested on: {amd64, i386} x {regular, INTR_FILTER}
In that case return an continue processing the packet without IPsec.
PR: 121384
MFC after: 5 days
Reported by: Cyrus Rahman (crahman gmail.com)
Tested by: Cyrus Rahman (crahman gmail.com) [slightly older version]
"Fast IPsec: Initialized Security Association Processing." printf.
People kept asking questions about this after the IPsec shuffle.
This still is the Fast IPsec implementation so no worries that it would
be any slower now. There are no functional changes.
Discussed with: sam
MFC after: 4 days
No need to compile 'dead' code.
I am leaving it in because we will have to review the concept and
should use the common function in various places.
MFC after: 5 days
receivers from being given interrupts if any CPUs in the system were not
tagged as interrupt receivers that I introduced when switching the x86
interrupt code to track CPUs via FreeBSD CPU IDs rather than local APIC
IDs. In practice this only affects systems with Hyperthreading (though
disabling HTT in the BIOS would workaround the issue) as that is the only
case currently where one can have CPUs that aren't tagged as interrupt
receivers. On a Dell SC1425 test box with 2 x Xeon w/ HTT (so 4 logical
CPUs of which 2 were interrupt receivers) the result was that all
device interrupts were sent to CPU 0.
MFC after: 1 week
Pointy hat to: jhb
different "platforms" on x86 machines. The existing code already handles
having two platforms: ACPI and legacy. However, the existing approach was
rather hardcoded and difficult to extend. These changes take the approach
that each x86 hardware platform should provide its own nexus(4) driver (it
can inherit most of its behavior from the default legacy nexus(4) driver)
which is responsible for probing for the platform and performing
appropriate platform-specific setup during attach (such as adding a
platform-specific bus device). This does mean changing the x86 platform
busses to no longer use an identify routine for probing, but to move that
logic into their matching nexus(4) driver instead.
- Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the
legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it
can be overriden.
- Expose a nexus_init_resources() routine which initializes the various
resource managers so that subclassed nexus(4) drivers can invoke it from
their attach routine.
- The legacy nexus(4) driver explicitly adds a legacy0 device in its
attach routine.
- The ACPI driver no longer contains an new-bus identify method. Instead
it exposes a public function (acpi_identify()) which is a probe routine
that the MD nexus(4) drivers can use to probe for ACPI. All of the
probe logic in acpi_probe() is now moved into acpi_identify() and
acpi_probe() is just a stub.
- On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via
acpi_identify() and claims the nexus0 device if the probe succeeds. It
then explicitly adds an acpi0 device in its attach routine.
- The legacy(4) driver no longer knows anything about the acpi0 device.
- On ia64 if acpi_identify() fails you basically end up with no devices.
This matches the previous behavior where the old acpi_identify() would
fail to add an acpi0 device again leaving you with no devices.
Discussed with: imp
Silence on: arch@
callout_* API (e.g. callout_init_mtx(9)). This was one of the numerous
items on the http://wiki.freebsd.org/SMPTODO list.
Reviewed by: imp, obrien, jhb
MFC after: 1 week
virtual 86 mode to query the BIOS directly. This is needed for certain
HP machines whose BIOS only provide an SMAP when invoked from real mode.
On such machines the loader will be able to query the SMAP successfully
due to the recent BTX changes, but the kernel will not.
One thing I'm not sure of is if we can skip the INT 12h probe altogether
if we have the SMAP from the loader as it seems that we do the INT 12h
probe to setup enough state so we can use vm86 to call the BIOS.
MFC after: 1 week
failing to load on a kernel that has "nodevice mem" in the config. It will
now properly bring in the mem(4) module.
Submitted by: antoine
Reviewed by: imp
MFC after: 1 week
ABI and the direction flag, that is it now assumes that the direction
flag is cleared at the entry of a function and it doesn't clear once
more if needed. This new behaviour conforms to the i386/amd64 ABI.
Modify the signal handler frame setup code to clear the DF {e,r}flags
bit on the amd64/i386 for the signal handlers.
jhb@ noted that it might break old apps if they assumed DF == 1 would be
preserved in the signal handlers, but that such apps should be rare and
that older versions of gcc would not generate such apps.
Submitted by: Aurelien Jarno <aurelien aurel32 net>
PR: 121422
Reviewed by: jhb
MFC after: 2 weeks
