not be used as condition for ternary operator.
Submitted by: Tatsuki Makino <tatsuki_makino at hotmail dot com>
Approved by: re (kib)
MFC after: 1 week
Also, there is no need to use M_ZERO for idxmap_back. It will be
re-filled just after allocation in update_skipto_cache().
PR: 229665
MFC after: 1 week
"record-state" is similar to "keep-state", but it doesn't produce implicit
O_PROBE_STATE opcode in a rule. "set-limit" is like "limit", but it has the
same feature as "record-state", it is single opcode without implicit
O_PROBE_STATE opcode. "defer-action" is targeted to be used with dynamic
states. When rule with this opcode is matched, the rule's action will
not be executed, instead dynamic state will be created. And when this
state will be matched by "check-state", then rule action will be executed.
This allows create a more complicated rulesets.
Submitted by: lev
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D1776
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
Using of rwlock with multiqueue NICs for IP forwarding on high pps
produces high lock contention and inefficient. Rmlock fits better for
such workloads.
Reviewed by: melifaro, olivier
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15789
Per-cpu zone allocations are very rarely done compared to regular zones.
The intent is to avoid pessimizing the latter case with per-cpu specific
code.
In particular contrary to the claim in r334824, M_ZERO is sometimes being
used for such zones. But the zeroing method is completely different and
braching on it in the fast path for regular zones is a waste of time.
This feature is disabled by default and was removed when dynamic states
implementation changed to be lockless. Now it is reimplemented with small
differences - when dyn_keep_states sysctl variable is enabled,
dyn_match_ipv[46]_state() function doesn't match child states of deleted
rule. And thus they are keept alive until expired. ipfw_dyn_lookup_state()
function does check that state was not orphaned, and if so, it returns
pointer to default_rule and its position in the rules map. The main visible
difference is that orphaned states still have the same rule number that
they have before parent rule deleted, because now a state has many fields
related to rule and changing them all atomically to point to default_rule
seems hard enough.
Reported by: <lantw44 at gmail.com>
MFC after: 2 days
dyn_lookup_ipv[46]_state_locked(). These checks are remnants of not
ready to be committed code, and they are there by accident.
Due to the race these checks can lead to creating of duplicate states
when concurrent threads in the same time will try to add state for two
packets of the same flow, but in reverse directions and matched by
different parent rules.
Reported by: lev
MFC after: 3 days
o Modify ipfw(8) to be able set any prefix6 not just Well-Known,
and also show configured prefix6;
o relocate some definitions and macros into proper place;
o convert nat64_debug and nat64_allow_private variables to be
VNET-compatible;
o add struct nat64_config that keeps generic configuration needed
to NAT64 code;
o add nat64_check_prefix6() function to check validness of specified
by user IPv6 prefix according to RFC6052;
o use nat64_check_private_ip4() and nat64_embed_ip4() functions
instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows
to use any configured IPv6 prefixes that are allowed by RFC6052;
o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is
Well-Known IPv6 prefix. It is used to reduce overhead to check this;
o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config
structure. And respectivelly modify the rest of code;
o remove now unused ro argument from nat64_output() function;
o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions;
o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile
as example.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
given mbuf is considered as not matched.
If mbuf was consumed or freed during handling, we must return
IP_FW_DENY, since ipfw's pfil handler ipfw_check_packet() expects
IP_FW_DENY when mbuf pointer is NULL. This fixes KASSERT panics
when NAT64 is used with INVARIANTS. Also remove unused nomatch_final
field from struct nat64lsn_cfg.
Reported by: Justin Holcomb <justin at justinholcomb dot me>
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
ip_reass() expects IPv4 packet and will just corrupt any IPv6 packets
that it gets. Until proper IPv6 fragments handling function will be
implemented, pass IPv6 packets to next rule.
PR: 170604
MFC after: 1 week
o added struct ipfw_dyn_info that keeps all needed for ipfw_chk and
for dynamic states implementation information;
o added DYN_LOOKUP_NEEDED() macro that can be used to determine the
need of new lookup of dynamic states;
o ipfw_dyn_rule now becomes obsolete. Currently it used to pass
information from kernel to userland only.
o IPv4 and IPv6 states now described by different structures
dyn_ipv4_state and dyn_ipv6_state;
o IPv6 scope zones support is added;
o ipfw(4) now depends from Concurrency Kit;
o states are linked with "entry" field using CK_SLIST. This allows
lockless lookup and protected by mutex modifications.
o the "expired" SLIST field is used for states expiring.
o struct dyn_data is used to keep generic information for both IPv4
and IPv6;
o struct dyn_parent is used to keep O_LIMIT_PARENT information;
o IPv4 and IPv6 states are stored in different hash tables;
o O_LIMIT_PARENT states now are kept separately from O_LIMIT and
O_KEEP_STATE states;
o per-cpu dyn_hp pointers are used to implement hazard pointers and they
prevent freeing states that are locklessly used by lookup threads;
o mutexes to protect modification of lists in hash tables now kept in
separate arrays. 65535 limit to maximum number of hash buckets now
removed.
o Separate lookup and install functions added for IPv4 and IPv6 states
and for parent states.
o By default now is used Jenkinks hash function.
Obtained from: Yandex LLC
MFC after: 42 days
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D12685
specified in the arg1 into ICMPv6 destination unreachable code according
to RFC7915.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 3 weeks
Now it is possible to use UDPLite's port numbers in rules,
create dynamic states for UDPLite packets and see "UDPLite" for matched
packets in log.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
This is similar to the TCP case. where a TCP RST segment can be sent.
There is one limitation: When sending an ABORT in response to an incoming
packet, it should be tested if there is no ABORT chunk in the received
packet. Currently, it is only checked if the first chunk is an ABORT
chunk to avoid parsing the whole packet, which could result in a DOS attack.
Thanks to Timo Voelker for helping me to test this patch.
Reviewed by: bcr@ (man page part), ae@ (generic, non-SCTP part)
Differential Revision: https://reviews.freebsd.org/D13239
Hide the locking logic used in the dynamic states implementation from
generic code. Rename ipfw_install_state() and ipfw_lookup_dyn_rule()
function to have similar names: ipfw_dyn_install_state() and
ipfw_dyn_lookup_state(). Move dynamic rule counters updating to the
ipfw_dyn_lookup_state() function. Now this function return NULL when
there is no state and pointer to the parent rule when state is found.
Thus now there is no need to return pointer to dynamic rule, and no need
to hold bucket lock for this state. Remove ipfw_dyn_unlock() function.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D11657
Do not invoke IPv4 NAT handler for non IPv4 packets. Libalias expects
a packet is IPv4. And in case when it is IPv6, it just translates them
as IPv4. This leads to corruption and in some cases to panics.
In particular a panic can happen when value of ip6_plen modified to
something that leads to IP fragmentation, but actual packet length does
not match the IP length.
Packets that are not IPv4 will be dropped by NAT rule.
Reported by: Viktor Dukhovni <freebsd at dukhovni dot org>
MFC after: 1 week
IPsec support can be loaded as kernel module, thus do not depend from
kernel option IPSEC and always build O_IPSEC opcode implementation as
enabled.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
fq_pie schedulers packet classification functions in layer2 (bridge mode).
Dummynet AQM packet marking function ecn_mark() and fq_codel/fq_pie
schedulers packet classification functions (fq_codel_classify_flow()
and fq_pie_classify_flow()) assume mbuf is pointing at L3 (IP)
packet. However, this assumption is incorrect if ipfw/dummynet is
used to manage layer2 traffic (bridge mode) since mbuf will point
at L2 frame. This patch solves this problem by identifying the
source of the frame/packet (L2 or L3) and adding ETHER_HDR_LEN
offset when converting an mbuf pointer to ip pointer if the traffic
is from layer2. More specifically, in dummynet packet tagging
function, tag_mbuf(), iphdr_off is set to ETHER_HDR_LEN if the
traffic is from layer2 and set to zero otherwise. Whenever an access
to IP header is required, mtodo(m, dn_tag_get(m)->iphdr_off) is
used instead of mtod(m, struct ip *) to correctly convert mbuf
pointer to ip pointer in both L2 and L3 traffic.
Submitted by: lstewart
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12506
To properly handle 'fwd tablearg,port' opcode, copy sin_port value from
sockaddr_in structure stored in the opcode into corresponding hopstore
field.
PR: 222953
MFC after: 1 week
Acquiring of IPFW_WLOCK is requried for cases when we are going to
change some data that can be accessed during processing of packets flow.
When we create new named object, there are not yet any rules, that
references it, thus holding IPFW_UH_WLOCK is enough to safely update
needed structures. When we destroy an object, we do this only when its
reference counter becomes zero. And it is safe to not acquire IPFW_WLOCK,
because noone references it. The another case is when we failed to finish
some action and thus we are doing rollback and destroying an object, in
this case it is still not referenced by rules and no need to acquire
IPFW_WLOCK.
This also fixes panic with INVARIANTS due to recursive IPFW_WLOCK acquiring.
MFC after: 1 week
Sponsored by: Yandex LLC
Previously, GRE packets in IPv6 tunnels would be dropped by IPFW (unless
net.inet6.ip6.fw.deny_unknown_exthdrs was unset).
PR: 220640
Submitted by: Kun Xie <kxie@xiplink.com>
MFC after: 1 week
(TS) method is used. When packet timestamp is used, the "current_qdelay"
keeps storing the last queue delay value calculated in the dequeue
function. Therefore, when a burst of packets arrives followed by
a pause, the "current_qdelay" will store a high value caused by the
burst and stick to that value during the pause because the queue
delay measurement is done inside the dequeue function. This causes
the drop probability calculation function to calculate high drop
probability value instead of zero and prevents the burst allowance
mechanism from working properly. Fix this problem by resetting
"current_qdelay" inside the drop probability calculation function
when the queue length is zero and TS option is used.
Submitted by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after: 1 week
defined. On machines without arithmetic shift instructions, zero bits
may be shifted in from the left, giving a large positive result instead
of the desired divide-by power-of-2. Fix this by operating on the
absolute value and compensating for the possible negation later.
Reverse the order of the underflow/overflow tests and the exponential
decay calculation to avoid the possibility of an erroneous overflow
detection if p is a sufficiently small non-negative value. Also
check for negative values of prob before doing the exponential decay
to avoid another instance of of right shifting a negative value.
Tested by: Rasool Al-Saadi <ralsaadi@swin.edu.au>
MFC after: 1 week
The 'pktid' variable is modified while being used twice between
sequence points, probably due to htonl() is macro.
Reported by: PVS-Studio
MFC after: 1 week
to pass rule number and rule set to userland. In r272840 the kernel
internal rule representation was changed and the rulenum field of
struct ip_fw_rule got the type uint32_t, but userlevel representation
still have the type uint16_t. To not overflow the size of pointer
on the systems with 32-bit pointer size use separate variable to
copy rulenum and set.
Reported by: PVS-Studio
MFC after: 1 week