ZFSSRC is the top level directory where the ZFS sources come from. Don't
reuse it for a list of ZFS sources. Instead, use ZFS_SRC
Sponsored by: Netflix
The original interface created by wtap is named "wlan%d", which is the
same as the name of the vap created by wlan(4) and cause ifconfig(8)
may output like this:
wlan0:
parent interface: wlan0
Rename the interface created by wtap(4) to "wtap%d" to avoid confusing.
Reviewed by: adrian
Sponsored by: Google, Inc. (GSoC 2022)
Differential Revision: https://reviews.freebsd.org/D35751
Commit a7bb120f8b added a printf for the case where recovery
has not marked the session defunct by setting nfsess_defunct
to 1. It turns out that nfscl_hasexpired() calls
nfsrpc_setclient() directly, without setting nfsess_defunct.
This patch replaces the printf with code that sets
nfsess_defunct to 1 to handle this case.
If SIGTERM is issued to a process when it is doing I/O on
an "intr" mount, the NFSv4 server may reply NFSERR_BADSTATEID,
due to the Open being prematurely closed.
This can result in a call to nfscl_hasexpired() to do a
recovery.
This would explain at least one hang described in the PR.
PR: 260011
MFC after: 2 weeks
Effectively selectroute() addresses two different cases:
providing interface info for multicast destinations and providing
nexthop data for unicast ones. Current implementation intertwines
handling of both cases, especially in the error handling part.
Factor out all route lookup logic in a separate function,
lookup_route() to simplify the code.
Ensure consistent KPI: no error means *retifp is set and otherwise.
Differential Revision: https://reviews.freebsd.org/D35711
MFC after: 2 weeks
Currently selectroute() contains two nearly-identical versions of
the route lookup logic - one for original destination and another
for the case when IPV6_NEXTHOP option was set on the socket.
Factor out handling these route lookups in a separation function to
improve readability.
This change also fixes handling of link-local IPV6_NEXTHOPs.
Differential Revision: https://reviews.freebsd.org/D35710
MFC after: 2 weeks
The rc(8) framework support protecting services from OOM killer.
The current implementation applies the protection after the service has
already started. This works fine if only the main process is to be
protected (*_oomprotect=yes). However, the current implementation fails
to protect existing children when children are also to be protected
(*_oomprotect=all). This patch fixes that.
Note: it is not easy to apply the protectoin earlier because we want to
support both the services which use the "command" variable and those
that use the "start_cmd" variable.
PR: 256148
Approved by: adrian, osogbo
Tested by: Jamie Landeg-Jones <jamie@catflap.org>
Fixes: 3bead71e95 - Add a global option where we can protect
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35747
18db96dbfd introduced a use-after-free bug
in the error handling of the IPMICTL_RECEIVE_MSG ioctl.
Reported by: Coverity (CID 1490456) (via vangyzen)
Differential Revision: https://reviews.freebsd.org/D35605
CSU tests build fails with '/usr/lib/libgcc_s.so: undefined reference to
fma' when built with LLVM 14 for powerpcspe, so '-lm' is being added
explicitly.
It may be linked to https://reviews.llvm.org/D77558
Reviewed by: imp (earlier version)
MFC after: 2 days
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D35691
Fixes a small kernel memory leak which would occur if a pool failed
to import because the `DMU_POOL_VDEV_ZAP_MAP` key can't be read from
a presumably damaged MOS config. In the case of a missing key there
was no leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Finix1979 <yancw@info2soft.com>
Closes#13629
Apart from improving readability, this commit mentions that
<name>_oomprotect is ignored in a jail environment. Also, replace
${name}_cmd with the correct ${argument}_cmd and point the reader to
rc.subr(8).
MFC after: 1 week
New functions take lock and give lock after operation.
Removed locking and unlocking within other methods,
to prevent from recursive locking on non recursive lock.
Tested on EspressoBin.
Reviewed by: mw
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D35656
Jails without VNET have complete access to the ipfilter rules, NAT,
pools and logs. This is insecure. Only allow jails to manipulate
ipfilter rules, NAT tables and ippools if the jail has its own VNET.
Otherwise a jail can affect the global system.
This patch brings ipfilter in line with ipfw's support of VNET jails and
non-support of non-VNET jails.
MFC after: 1 week
Notable amount of tests related to the packet IO require two VNET jails
for proper testing and avoiding side effects for the host system.
Additionally, it is often required to run actions in the jails seme-sequentially
- waiting for the listener initialisation can be an example of such
dependency.
This change extends pytest vnet framework to allow defining multi-vnet
multi-epair topologies in declarative style, without any need to bother
about jail or repair names. All jail creation/teardown, interface
creation/teardown and address assignments are handled automatically.
Example:
TOPOLOGY = {
"vnet1": {"ifaces": ["if1", "if2", "if3"]},
"vnet2": {"ifaces": ["if1", "if2", "if3"]},
"if1": {"prefixes6": [("2001:db8:a::1/64", "2001:db8:a::2/64")]},
"if2": {"prefixes6": [("2001:db8:b::1/64", "2001:db8:b::2/64")]},
"if3": {"prefixes6": [("2001:db8:c::1/64", "2001:db8:c::2/64")]},
}
def vnet2_handler(self, vnet, obj_map, pipe):
ss = VerboseSocketServer("::", self.DEFAULT_PORT)
pipe.send("READY")
def test_output6_base(self):
self.wait_object(second_vnet.pipe)
The definitions above will create 2 vnets ("jail_test_output6_base",
"jail_test_output6_base_2"), 3 epairs, attached to both first and
second jails, set up the IP addresses for each epair, spawn another
process for vnet2_handler and pass control to vnet2_handler and
test_output6_base. Both processes can pass objects between each
other using pre-created pipes.
Differential Revision: https://reviews.freebsd.org/D35708
Not all gicv3 fdt children have a compatible property. Those that don't
are configuration data rather than something that should have a driver
attach.
Sponsored by: The FreeBSD Foundation
VNET_FOREACH() is a LIST_FOREACH if VIMAGE is set, but empty if it's
not. This means that users of the macro couldn't use 'continue' or
'break' as one would expect of a loop.
Change VNET_FOREACH() to be a loop in all cases (although one that is
fixed to one iteration if VIMAGE is not set).
Reviewed by: karels, melifaro, glebius
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35739
This allows for easy copy-and-paste of a unix(4) peer name for lookup.
With current implementation it is guaranteed that a peer listed could be
found in the output.
Differential revision: https://reviews.freebsd.org/D35727
Kernel provides us with enough information to display all possible
connections between UNIX sockets.
o Store unp_conn, xu_firstref and xu_nextref in the faddr of a UNIX sock.
o Build tree of file descriptors, indexed by the socket pointer.
o In displaysock() print out all possible information:
1) if socket is bound, print name of this socket
2) if socket has connected to a peer with a name, print peers name
3) if socket has connected to a peer without a name, print [pid fd]
4) if a bound socket has received connections, print list of them
as [pid fd]
Previously, only 1) either 2) were printed.
Reviewed by: tuexen
Differential revision: https://reviews.freebsd.org/D35726
Three digit file descriptors are very common these days. So let the
columns not break with them.
Reviewed by: tuexen
Differential revision: https://reviews.freebsd.org/D35725
o Use tree to lookup by socket kvaddr. The size of hash is too big for a
small virtual machine and at the same time too little for a large
production server. A tree would better fit here.
o For those pcbs, that don't have a socket associated, use a list.
o Provide a second tree to lookup by pcb kvaddr. These removes full hash
traversal when printing every unix(4) socket.
Reviewed by: tuexen
Differential revision: https://reviews.freebsd.org/D35724
This allows to write very short comparison function when we are
comparing just pointer values:
return ((intptr_t)((uintptr_t)a->ptr/2 - (uintptr_t)b->ptr/2));
Reviewed by: dougm, alc
Differential revision: https://reviews.freebsd.org/D35722
The comment from Robert Watson doubts that this condition ever happens.
Our analysis confirm that. Also, we found that if you manage to create
such a connection with help of some other bug, then after the "second
case" code is executed, the kernel will panic in other part of the stack.
Reviewed by: rrs, tuexen
Differential revision: https://reviews.freebsd.org/D35714
Older versions of growfs(8) failed to correctly update fs_dsize.
Filesystems that have been grown fail the test for fs_dsize's correct
value. For now we exclude the fs_dsize test from the requirements.
Reported by: Edward Tomasz Napiera
Tested by: Edward Tomasz Napiera
Tested by: Peter Holm
MFC after: 1 month (with 076002f24d)
Differential Revision: https://reviews.freebsd.org/D35219
The original check verified that if an alternate superblock has not
been selected that the superblock is located in its standard location.
For UFS1 the with a 65536 block size, the first backup superblock
is at the same location as the UFS2 superblock. Since SBLOCK_UFS2
is the first location checked, the first backup is the superblock
that will be used for a UFS1 filesystems with a 65536 block size.
This patch allows the use of the first backup superblock in that
situation.
Reported by: Peter Holm
Tested by: Peter Holm
MFC after: 1 month (with 076002f24d)
Differential Revision: https://reviews.freebsd.org/D35219
The tests for number of cylinder groups (fs_ncg), inodes per cylinder
group (fs_ipg), and the size and layout of the cylinder group summary
information (fs_csaddr and fs_cssize) were overly restrictive and
would exclude some valid filesystems. These updates avoid precluding
valid fiesystems while still detecting rogue values that can crash or
hang the kernel.
Reported by: Chuck Silvers
Tested by: Peter Holm
MFC after: 1 month (with 076002f24d)
Differential Revision: https://reviews.freebsd.org/D35219
atf format does not provide any way of signalling any error message
back to the atf runner when listing tests. Work this around by
reporting "__test_cases_list_pytest_binary_not_found__" test instead.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D35721
These are all "standard microarchitectural events", which in theory are
supported by every ARMv8 processor. In practice, it depends on the
pmu-event definitions being complete and accurate, which they are not
for every processor. Still, these aliases should be functional on the
majority of systems.
PR: 254532
Reported by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35550
Thanks to the recently updated import of the jevents utility by mav@, we
can now compile the latest version of these event definitions. This
should support a wider set of common ARMv8 processors, for example, the
Cortex-A72 in the Raspberry Pi 4.
This brings this folder in sync with Linux commit 62e6eb8d5454.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35549
Minor version update which improves styling of a printouts, fixes
the KASAN and KMSAN kernel builds and LLQ reconfiguration after the
device reset.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
After the device reset, the LLQ configuration descriptor wasn't passed
to the hardware. On a 6-generation AWS instances (like C6gn), it is
required to pass the LLQ descriptor after the device reset, otherwise
the hardware will be missing the LLQ configuration resulting in
performance degradation.
This patch reconfigures the LLQ each time the ena_device_init() is
called. This means that the LLQ descriptor will be passed during the
initial configuration and after a reset.
The ena_map_llq_mem_bar() function call was moved before the
ena_device_init() call, to make sure that the mem bar is available.
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
In most places, the req_id is printed first, and the qid is printed as a
second. To align the driver, one printout was reworked and the print
order of those variables was changed.
Suggested by: rpokala
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Add an option to enable/disable DTrace without disabling ZFS. New
architectures such as CHERI may support ZFS before they support DTrace
and the old model of WITHOUT_CDDL disabling both wasn't helpful.
For compatiblity, the CDDL option remains and WITHOUT_CDDL implies
WITHOUT_DTRACE. WITHOUT_DTRACE also implies WITHOUT_CTF.
As part of this change, largely convert cddl/*/Makefile to using the
more compact SUBDIR.${MK_<FOO>}+= form rather than using intermediate
variables.
Reviewed by: markj
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D35718
The field for interface names for netstat -i was 5 characters by
default, which is no longer sufficient with names like "vlan1234"
and "vtnet0". netstat -iW computed the necessary field width, but
also enlarged the address field by a lot (especially with IPv6 enabled).
Make netstat -i compute the field width for interface names with or
without -W. Note that the existing default output does not fit in
80 columns in any case. Update the man page accordingly, documenting
the remaining effect of -W with -i. Also add -W to the list of
General Options, as there are numerous pointers to this.
Reported by: Chris Ross
Reviewed by: melifaro, rgrimes, cy
Differential Revision: https://reviews.freebsd.org/D35703
MFC after: 1 week
Split the current FDT-only implementation up into an FDT and an
ACPI part reusing and sharing as much code as possible (thanks mw!).
This makes the Synopsis XHCI root hubs attach correctly on SolidRun's
HoenyComb instead of just the generic XHCI root and this means we
are also doing proper chip setup and applying the quirk needed there [1].
There is one problem with ACPI attachment in that it uses the generic
XHCI PNP ID. So we need to do extra checks in order to not claim
all xhci, which means we check for a known quirk to be present
in acpi_probe. Long term this isn't scaling and this was discussed
in SolidRun's Discord Channel in 2021 with the intend that "jnettlet"
will take this to a steering committee. Since then ACPI has kind-of
become a technology non grata (due to not getting changes into Linux
timely) so it is unclear if this will ever happen. If there will be
further hardware with dwc3/ACPI we should go and make sure this problem
gets solved.
[1] 24698f90b7/Silicon/NXP/LX2160A/AcpiTables/Dsdt/Usb.asl
Reviewed by: manu, mw
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D32256
Before this change for every valid parity column raidz_parity_verify()
allocated new buffer and copied there existing data, then recalculated
the parity and compared the result with the copy. This patch removes
the memory copy, simply swapping original buffer pointers with newly
allocated empty ones for parity recalculation and comparison. Original
buffers with potentially incorrect parity data are then just freed,
while new recalculated ones are used for repair.
On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this
change reduces memory traffic during scrub by 17% and total unhalted
CPU time by 25%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13613
