in r7 and use ip to store the old version of r7 as it is not guaranteed to
be kept when calling a subroutine. The kernel will preserve the register
across system calls.
path longer than this.
- Fix an unreached case of check against sizeof buf, which in turn leads
to an off-by-one nul byte write on the stack. The original condition
can never be satisfied because the passed boundary is the maximum value
that can be returned, so code was harmless.
MFC after: 1 month
NetBSD's. This output size limited versions of vis and unvis functions
as well as a set of vis variants that allow arbitrary characters to be
specified for encoding.
Finally, MIME Quoted-Printable encoding as described in RFC 2045 is
supported.
A fork/exec could happen between open and fcntl, leaking a file descriptor.
Using O_CLOEXEC fixes this and as a side effect simplifies the code.
NetBSD already had this (I checked this after making the change myself).
Reviewed by: gabor
The changes were derived from what has been committed to NetBSD, with
modifications. These are:
1. Preserve the existsing GLOB_LIMIT behaviour by including the number
of matches to the set of parameters to limit.
2. Change some of the limits to avoid impacting normal use cases:
GLOB_LIMIT_STRING - change from 65536 to ARG_MAX so that glob(3)
can still provide a full command line of expanded names.
GLOB_LIMIT_STAT - change from 128 to 1024 for no other reason than
that 128 feels too low (it's not a limit that impacts the
behaviour of the test program listed in CVE-2010-2632).
GLOB_LIMIT_PATH - change from 1024 to 65536 so that glob(3) can
still provide a fill command line of expanded names.
3. Protect against buffer overruns when we hit the GLOB_LIMIT_STAT or
GLOB_LIMIT_READDIR limits. We append SEP and EOS to pathend in
those cases. Return GLOB_ABORTED instead of GLOB_NOSPACE when we
would otherwise overrun the buffer.
This change also modifies the existing behaviour of glob(3) in case
GLOB_LIMIT is specifies by limiting the *new* matches and not all
matches. This is an important distinction when GLOB_APPEND is set or
when the caller uses a non-zero gl_offs. Previously pre-existing
matches or the value of gl_offs would be counted in the number of
matches even though the man page states that glob(3) would return
GLOB_NOSPACE when gl_matchc or more matches were found.
The limits that cannot be circumvented are GLOB_LIMIT_STRING and
GLOB_LIMIT_PATH all others can be crossed by simply calling glob(3)
again and with GLOB_APPEND set.
The entire description above applies only when GLOB_LIMIT has been
specified of course. No limits apply when this flag isn't set!
Obtained from: Juniper Networks, Inc
equivalent to malloc(size). This eliminates the conditional expression
used for calling either realloc() or malloc() when realloc() will do
all the time.
free and clear the gl_pathv pointer in the glob_t structure. Such
breaks the invariant of the glob_t structure, as stated in the comment
right in front of the globextend() function. If gl_pathv was non-NULL,
then gl_pathc was > 0. Making gl_pathv a NULL pointer without also
setting gl_pathc to 0 is wrong.
Since we otherwise don't free the memory associated with a glob_t in
error cases, it's unlikely that this change will cause a memory leak
that wasn't already there to begin with. Callers of glob(3) must
call globfree(3) irrespective of whether glob(3) returned an error
or not.
This commit adds a new mode option 'e' that must follow any 'b', '+' and/or
'x' options. C11 is clear about the 'x' needing to follow 'b' and/or '+' and
that is what we implement; therefore, require a strict position for 'e' as
well.
For freopen() with a non-NULL path argument and fopen(), the close-on-exec
flag is set iff the 'e' mode option is specified. For freopen() with a NULL
path argument and fdopen(), the close-on-exec flag is turned on if the 'e'
mode option is specified and remains unchanged otherwise.
Although the same behaviour for fopen() can be obtained by open(O_CLOEXEC)
and fdopen(), this needlessly complicates the calling code.
Apart from the ordering requirement, the new option matches glibc.
PR: kern/169320
libc.a and libc_p.a. In addition, define isnan in libm.a and libm_p.a,
but not in libm.so.
This makes it possible to statically link executables using both isnan
and isnanf with libc and libm.
Tested by: kargl
MFC after: 1 week
output and replace it with a new visible sysctl kern.ipc.acceptqueue
of the same functionality. It specifies the maximum length of the
accept queue on a listen socket.
The old kern.ipc.somaxconn remains available for reading and writing
for compatibility reasons so that existing programs, scripts and
configurations continue to work. There no plans to ever remove the
orginal and now hidden kern.ipc.somaxconn.
This adds two features:
* uid_from_user() and gid_from_group() as the reverse of user_from_uid()
and groups_from_gid().
* pwcache_userdb() and pwcache_groupdb() which allow alternative lookup
functions to be used. For example lookups from passwd and group
databases in a non-standard location.
srandomdev(). This doesn't actually work
with any modern C compiler:
In particular, both clang and modern gcc
verisons silently elide any xor operation
with 'junk'.
Approved by: secteam
MFC after: 3 days
After further discussion, instead of pretending to use
uid_t and gid_t as upstream Solaris and linux try to, we
are better using u_int, which is in fact what the code
can handle and best approaches the range of values used
by uid and gid.
Discussed with: bde
Reviewed by: bde
The previous change (based on Solaris) doesn't work properly either
as the casting only has the effect of quieting the compiler.
Move back to the previous solution but adjust the sizeof()
type in xdr_array(). This should mostly work (by accident).
Reported by: bde
1) Don't iterate the loop from the environment array beginning each time,
iterate it under the last place we deactivate instead.
2) Call __rebuild_environ() not on each iteration but once, only at the end
of whole loop (of course, only in case if something is changed).
MFC after: 1 week
As part of the previous commit, uses of xdr_int() were replaced
with xdr_u_int(). This has undesired effects as the second
argument doesn't match exactly uid_t or gid_t. It also breaks
assumptions in the size of the provided types.
To work around those issues we revert back to the use of xdr_int()
but provide proper casting so the behaviour doesn't change.
While here fix a style issue in the affected lines.
Reported by: bde
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
This change matches the reference (OpenSolaris) implementation.
Tested by: David Wolfskill
Obtained from: Bull GNU/Linux NFSv4 Project (libtirpc)
MFC after: 2 weeks
__rpc_getconfip is supposed to return the first netconf
entry supporting tcp or udp, respectively. The code will
currently return the *last* entry, plus it will leak
memory when there is more than one such entry.
This change matches the reference (OpenSolaris)
implementation.
Tested by: David Wolfskill
Obtained from: Bull GNU/linux NFSv4 Project (libtirpc)
MFC after: 1 week
to craft environment variables with similar names like that:
a=1
a=2
...
unsetenv("a") should remove them all to make later getenv("a") impossible.
Fix it to do so (this is GNU autoconf test #3 failure too).
PR: 172273
MFC after: 1 week
This fixes a race condition where another thread may fork() before CLOEXEC
is set, unintentionally passing the descriptor to the child process.
This commit only adds O_CLOEXEC flags to open() or openat() calls where no
fcntl(fd, F_SETFD, FD_CLOEXEC) follows. The separate fcntl() call still
leaves a race window so it should be fixed later.
Because fts keeps internal file descriptors open across calls, making such
descriptors close-on-exec helps not only multi-threaded applications but
also single-threaded applications.
In particular, this prevents passing a temporary file descriptor for saving
the current directory to processes created via find -exec.
The attempt to merge changes from the linux libtirpc caused
rpc.lockd to exit after startup under unclear conditions.
After many hours of selective experiments and inconsistent results
the conclusion is that it's better to just revert everything and
restart in a future time with a much smaller subset of the
changes.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
Passing an invalid pointer results in undefined behaviour.
The wrappers in libthr access some of the data pointed to by the arguments
in userland, so that an invalid pointer will cause a signal and not an
[EFAULT] error return.
Furthermore, if the [EFAULT] error occurs when the kernel is writing, it is
not a proper error in the sense that the call still commits (changing the
signal disposition or accepting the signal).
MFC after: 1 week
The following change caused rpc.lockd to exit after startup:
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the
same way.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
The ENOTDIR mapping was introduced in r235266 for kern/128933 based on
an interpretation of the somewhat ambiguous language in the POSIX realpath
specification. The interpretation is inconsistent with Solaris and Linux,
a regression from 9.0, and does not appear to be permitted by the
description of ENOTDIR:
20 ENOTDIR Not a directory. A component of the specified pathname
existed, but it was not a directory, when a directory was
expected.
PR: standards/171577
MFC after: 3 days
For some reason, libc exports the symbol .cerror (HIDENAME(cerror)), albeit
in the FBSDprivate_1.0 version. It looks like there is no reason for this
since it is not used from other libraries. Given that it cannot be accessed
from C and its strange calling convention, it is rather unlikely that other
things rely on it. Perhaps it is from a time when symbols could not be
hidden.
Most of the amd64 assembler code jumps to .cerror using the GOT. It can jump
to it directly now, as in non-PIC mode.
There are also some minor size optimizations to instructions but they yield
virtually no benefit in the size of libc.so.7 due to padding.
Reviewed by: kib
For some reason, libc exports the symbol .cerror (HIDENAME(cerror)), albeit
in the FBSDprivate_1.0 version. It looks like there is no reason for this
since it is not used from other libraries. Given that it cannot be accessed
from C and its strange calling convention, it is rather unlikely that other
things rely on it. Perhaps it is from a time when symbols could not be
hidden.
Not exporting .cerror causes it to be jumped to directly instead of via the
PLT.
This change also takes advantage of .cerror's new status by not saving and
loading %ebx before jumping to it. (Therefore, .cerror now saves and loads
%ebx itself.) Where there was a conditional jump to a jump to .cerror, the
conditional jump has been changed to jump to .cerror directly (many modern
CPUs don't do static prediction and in any case it is not much of a benefit
anyway).
This change makes libc.so.7 a few kilobytes smaller.
Reviewed by: kib
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____
Fixed infinite loop in svc_run()
author Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____
__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____
Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____
Converted all uid and gid variables of the type uid_t and gid_t.
author Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____
libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed
These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.
rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
author Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)
Obtained from: Bull GNU/Linux NFSv4 Project
MFC after: 3 weeks
On Windows, AUX is the auxiliary device, usually pointing to COM1.
Therefore it is forbidden to create a file named aux.c. To make it a bit
easier for Windows users to check out our source code, rename this file
to auxv.c.
MFC after: 1 month
Discussed with: kib
Suggested by: Eric van Gyzen <eric vangyzen net>
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this. POSIX does have a requirement on the
application that maxfds not exceed {OPEN_MAX}, but does not require the
implementation to check it ("may fail").
PR: 95239
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this.
PR: 95239
Submitted by: Todd Miller
