that there are 3 different interrupt enable bits, 2 for different
families of cards, and 1 for when MSI is used. Also apply a big
hammer backstop for cards that aren't recognized. This should fix
all of the interrupt issues at boot.
- changes in support of the VLAN filter fix to 126850
- removal of a bunch of legacy code that was cruft, if not
possibly harmful.
- removal of POLLING from this driver, with multiqueue and
MSIX it just makes no sense here.
- Fix an LRO bug that I've been working on internally, intermittent
panics under stress, the problem was releasing the RX ring lock
before the LRO flushing.
- Following the above fix I now enable LRO by default
- For performance reasons increase the default number of RX queues
to 4.
- Add AIM - "Adaptive Interrupt Moderation", a fancy way of saying
that the EITR value is dynamically changed based on the size of
packets in the last interrupt interval.
- Much goodness to try, enjoy!!
A couple of months ago I was quite impressed, because when I was writing
code, I discovered that uiomove() would not allow any locks to be held,
while ureadc() did, mainly because ureadc() is implemented using the
same building blocks as uiomove().
Let's see if this triggers any aditional witness warnings on our source
tree.
Reviewed by: atillio
Previously it may have contained unnecessary (even sensitive) data from
the previous allocation.
As a (good) side effect, scratch memory may be used to store the previous
filter state(s) safely because it is allocated and freed with filter itself.
However, use it carefully because bpf_filter(9) does not have this behavior.
MFC after: 3 days
- Change it so that without INVARIANTs there are
no panics in SCTP.
- sctp_timer changes so that we have a recovery mechanism
when the sent list is out of order.
insert new vnode into the mount vnode list. Then, for the SU-enabled
mount, ffs_vfree could create freefile dependency. This dependency can
hang around forever since inode is not marked as IN_MODIFIED and
correspondingly inodeblock may be not marked as dirty.
After ffs_vget() fails, retry with FFSV_FORCEINSMQ, mark the inode as
modified, and vput() it immediately. Take care of the dup alloc.
Tested by: pho
Reviewed by: tegge
MFC after: 1 month
dependencies. In particular, it may need this while syncing filesystem
being unmounted. Since during unmount MNTK_NOINSMNTQUE flag is set,
that could sometimes disallow insertion of the vnode into the vnode
mount list, softdep code needs to overwrite the MNTK_NOINSMNTQUE flag.
Create the ffs_vgetf() function that sets the VV_FORCEINSMQ flag for
new vnode and use it consistently from the softdep code instead of
ffs_vget().
Add the retry logic to the softdep_flushfiles() to flush the vnodes
that could be instantiated while flushing softdep dependencies.
Tested by: pho, kris
Reviewed by: tegge
MFC after: 1 month
to ignore the unmounting and forces insertion of the vnode into the mount
vnode list.
Change insmntque() to fail when forced unmount is in progress and
VV_FORCEINSMQ is not specified.
Add an assertion to the insmntque(), requiring the vnode to be
exclusively locked for mp-safe filesystems.
Use the VV_FORCEINSMQ for the creation of the syncvnode.
Tested by: pho
Reviewed by: tegge
MFC after: 1 month
Use the much simpler cdevpriv for per-fd state and enable it. This allows
multiple opens of /dev/ipmi0 (e.g. using ipmitool while ipmievd is running
in the background).
MFC after: 1 week
storage. We can safely remove the label copying operations since
M_MOVE_PKTHDR will move the mbuf tags (which contain MAC labels) to
the destination mbuf.
MFC after: 1 week
Discussed with: rwatson
For some reason a return-statement crept into this code, where it
shouldn't belong. This means we didn't properly unlock the TTY before
returning to userspace.
Submitted by: Tor Egge <tor egge cvsup no freebsd org>
- Added some additional code for debug builds.
- Fixed a problem printing physical memory on 64bit system during debugging.
- Modified some of the context memory and mailbox register names to more
clearly distinguish their use.
- Added memory barriers for Intel CPUs when accessing host memory data
structures which are written by hardware.
MFC after: Two weeks.
doing it on every CPU.
- Use CPU_ABSENT() rather than pcpu_find() to determine if a CPU is not
present.
- Count up to mp_maxid rather than MAXCPU when iterating over CPUs to
match the rest of the code in the kernel.
MFC after: 1 week
if_ethersubr.c. CTASSERT is implemented using a dummy typedef, which if
used in a header file may conflict with another CTASSERT in a source file
using that header.
I'll make a note of this in CTASSERT's man page.
Approved by: imp
says that in such cases we can pick any interrupt. One of these cards
is the LG11 Wireless LAN card. I don't have one of these, but I do
know that this doesn't hurt any cards I've tried it with.
PR: 92070
Submitted by: Helge Oldach
MFC after: 3 days
first driver that does the configuration dance with CFE's. There's
likely some additional configuration that's needed to get things
working completely...
- Allocate thread0.td_kstack in pmap_bootstrap(), provide guard page
- Switch to thread0.td_kstack as soon as possible i.e. right after return
from e500_init() and before mi_startup() happens
- Clean up temp stack area
- Other minor cosmetics in machdep.c
Obtained from: Semihalf
is returned shall be kept in the waitable state.
Add WSTOPPED as an alias for WUNTRACED.
Submitted by: Jukka Ukkonen <jau at iki fi>
PR: standards/116221
MFC after: 2 weeks
executed by fexecve(2), imgp->args->fname is NULL. Moreover, there is
no way to recover the path to the script being executed.
Do what some other U*ixes do unconditionally, namely supply /dev/fd/n
as the script path when called from fexecve(). Document requirement of
having fdescfs mounted as caveat.
Split the driver into the core functionality part (sys/dev/tsec/if_tsec.c) and
the bus attachment (sys/dev/tsec/if_tsec_ocp.c).
This lets better integrate and maintain the driver in other environments with
different attachment abstractions (there is at least one other FreeBSD port --
MPC83xx -- which uses this TSEC driver, but with different local bus model
i.e. some OF derivative). While there, clean up and fix minor cosmetics.
Obtained from: Semihalf
