to select a serial console and debug port (resp). On ia64 these replace
the use of hints completely and take precedence over hints on alpha,
amd64 and i386. On sparc64 these variables are not yet recognised.
The reasons for introducing these variables are:
1. Hints have side-effects. They reserve the unit number for use by
isa or acpi devices and therefore cannot be used to select a pci
device. Also, the use of a unit number to select a device prior
to bus enumeration is nonsense. The new variables have no side-
effects and are not based on unit numbers.
2. Hints don't have the expression power to allow the sysadmin to
select UARTs that are not legacy PC devices and need the support
of compile-time constants to give the sysadmin some level of
flexibility.
The hw.uart.console and hw.uart.dbgport variables specify a list of
attributes. An attribute is a tag-value pair, seperated by a colon.
Attributes are seperated by a comma. Where possible, tags are the
same as those in /etc/remote (only br and pa in practice). Details
can be found in the manpage (not part of this commit).
Not tested on: amd64, pc98
* Disabled shared-library building, as some API breakage is
still likely. (I didn't realize it was turned on by default.) If
you have an existing /usr/lib/libarchive.so.2, I recommend deleting it.
* Pax interchange format now correctly stores and reads UTF8
for extended attributes. In particular, pax format can portably
handle arbitrarily long pathnames containing arbitrary characters.
* Library compiles cleanly at -O2, -O3, and WARNS=6 on all
FreeBSD-CURRENT platforms.
* Minor portability improvements inspired by Juergen Lock
and Greg Lewis. (Less reliance on stdint.h, isolating of
various portability-challenged constructs.)
* archive_entry transparently converts multi-byte <-> wide character
strings, allowing clients and format handlers to deal with either
one, as appropriate.
* Support for reading 'L' and 'K' entries in standard tar archives
for star compatibility.
* Recognize (but don't yet handle) ACL entries from Solaris tar.
* Pushed format-specific data for format readers down into
format-specific storage and out of library-global storage. This
should make it easier to maintain individual formats without mucking
with the core library management.
* Documentation updates to track the above changes.
* Updates to tar.5 to correct a few mistakes and add some additional
information about GNU tar and Solaris tar formats.
Notes:
* The basic 'tar' reader is getting more general; there's not much
point in keeping the 'gnutar' reader separate. Merging the two
would lose a bunch of duplicate code.
* The libc ACL support is looking increasingly inadequate for my needs
here. I might need to assemble some fairly significant code for
parsing and building ACLs. <sigh>
revision 1.343, but it's needed for btxld(8), and this fix (along
with the --enable-64-bit-bfd configured BFD on i386) allows other
architectures to successfully cross-build the i386 world.
Tested on: alpha
from ddp_usrreq.c. Functions moved are:
at_pcballoc()
at_pcbconnect()
at_pcbdetach()
at_pcbdisconnect()
at_pcbsetaddr()
at_sockaddr()
Also moved are ddp_ports and ddpcb, global variables associated with DDP
pcbs. This makes PCB implementation more parallel to inet, inet6, and
ipx.
device, the device is probed multiple times (so each device is
detected N times after unloading/loading the module N-1 times).
The real fix is (quote Doug and Warner):
> : In an ideal world, there should be some kind of BUS_UNIDENTIFY method
> : which a driver could use to delete the devices it created in
> : BUS_IDENTIFY.
>
> Or the bus would have a driver deleted routine that got called and it
> would remove all instances of the devclass attached to it.
Reviewed by: Doug Rabson & Warner Losh
to mmap it PROT_EXEC. This also depends on the architecture, as some
architextures (e.g. i386) do not distinguish between read and exec pages
Inspired by: http://linux.bkbits.net:8080/linux-2.4/cset@1.1267.1.85
Reviewed by: alc
mappings required by mdstart_swap(). On i386, if the ephemeral mapping
is already in the sf_buf mapping cache, a swap-backed md performs
similarly to a malloc-backed md. Even if the ephemeral mapping is not
cached, this implementation is still faster. On 64-bit platforms, this
change has the effect of using the direct virtual-to-physical mapping,
avoiding ephemeral mapping overheads, such as TLB shootdowns on SMPs.
On a 2.4GHz, 400MHz FSB P4 Xeon configured with 64K sf_bufs and
"mdmfs -S -o async -s 128m md /mnt"
before:
dd if=/dev/md0 of=/dev/null bs=64k
134217728 bytes transferred in 0.430923 secs (311465697 bytes/sec)
after with cold sf_buf cache:
dd if=/dev/md0 of=/dev/null bs=64k
134217728 bytes transferred in 0.367948 secs (364773576 bytes/sec)
after with warm sf_buf cache:
dd if=/dev/md0 of=/dev/null bs=64k
134217728 bytes transferred in 0.252826 secs (530870010 bytes/sec)
malloc-backed md:
dd if=/dev/md0 of=/dev/null bs=64k
134217728 bytes transferred in 0.253126 secs (530240978 bytes/sec)
I've added -fno-strict-aliasing for now so we can ease into this.
I wanted to shoot for -O3, but the inlining caused problems due to GCC's
size heuristics; so also add -frename-registers, which is one of the things
-O3 would have given us.
entry size and the ELF version. Also, avoid a potential integer
overflow when determining whether the ELF header fits entirely
within the first page.
Reviewed by: jdp
A panic when attempting to execute an ELF binary with a bogus program
header table entry size was
Reported by: Christer Öberg <christer.oberg@texonet.com>
the tap driver, even with Giant over the cdev operation vector, due to
a non-atomic test-and-set of the si_drv1 field in the dev_t. This bug
exists with Giant under high memory pressure, as malloc() may sleep
in tapcreate(), but is less likely to occur. The resolution will
probably be to cover si_drv1 using the global tapmtx since no softc is
available, but I need to think about this problem more generally
across a range of drivers using si_drv1 in combination with SI_CHEAPCLONE
to defer expensive allocation to open().
Correct what appears to be a bug in the original if_tap implementation,
in which tapopen() will panic if a tap device instance is opened more
than once due to an incorrect assertion -- only triggered if INVARIANTS
is compiled in (i.e., when built into a kernel). Return EBUSY instead.
Expand mtx_lock() coverage using tp->tap_mtx to include tp->ether_addr.
- 0 should have been -1 in previous commit (just to stay consistent),
- Spell null pointers as NULL, not 0,
- Fixed the comment about pr_usesysctl to not confuse it with boolean.
Pointed by: bde
