Previously these were libc functions but were requested to
be made into system calls for atomicity and to coalesce what
might be two entrances into the kernel (signal mask setting
and floating point trap) into one.
A few style nits and comments from bde are also included.
Tested on alpha by: gallatin
subsystems capabilities:
_SC_AIO_LISTIO_MAX returns the default of _POSIX_AIO_LISTIO_MAX
_SC_AIO_MAX returns the default _POSIX_AIO_MAX
_SC_AIO_PRIO_DELTA_MAX returns the default of 0
Without these adjustments the values returned are -1 even when the
aio side of the kernel returns '0' for them which is incorrect.
Noticed by: Craig Rodrigues <rodrigc@attbi.com>
No functional changes, but:
+ the mrouting module now should behave the same as the compiled-in
version (it did not before, some of the rsvp code was not loaded
properly);
+ netinet/ip_mroute.c is now truly optional;
+ removed some redundant/unused code;
+ changed many instances of '0' to NULL and INADDR_ANY as appropriate;
+ removed several static variables to make the code more SMP-friendly;
+ fixed some minor bugs in the mrouting code (mostly, incorrect return
values from functions).
This commit is also a prerequisite to the addition of support for PIM,
which i would like to put in before DP2 (it does not change any of
the existing APIs, anyways).
Note, in the process we found out that some device drivers fail to
properly handle changes in IFF_ALLMULTI, leading to interesting
behaviour when a multicast router is started. This bug is not
corrected by this commit, and will be fixed with a separate commit.
Detailed changes:
--------------------
netinet/ip_mroute.c all the above.
conf/files make ip_mroute.c optional
net/route.c fix mrt_ioctl hook
netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here
together with other rsvp code, and a couple
of indentation fixes.
netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks
netinet/ip_var.h rsvp function hooks
netinet/raw_ip.c hooks for mrouting and rsvp functions, plus
interface cleanup.
netinet/ip_mroute.h remove an unused and optional field from a struct
Most of the code is from Pavlin Radoslavov and the XORP project
Reviewed by: sam
MFC after: 1 week
the deprecated utime(3). utimes(2) uses timeval, but utime(3) uses
time_t's. If you do bad things (like I did) by mixing up include files
with libc, then install can do strange things if you mismatch the time_t
stuff. utime() is emulated entirely within libc.
Approved by: re (jhb)
time_t. Deal with the possibility that time_t != int32_t. This boils
down to this sort of thing:
- time(&ut.ut_time);
+ ut.ut_time = time(NULL);
and similar for ctime(3) etc. I've kept it minimal for the stuff
that may need to be portable (or 3rd party code), but used Matt's time32
stuff for cases where that isn't as much of a concern.
Approved by: re (jhb)
to worry about ABI vs released systems yet. This is mostly transparent
since there is no significant exposure in the syscall interface. The
things that go wrong are mostly userland stuff - time(&intvariable).
Reviewed by: dfr, marcel
Approved by: re (jhb)
more manageable.
- Add some helper variables (CVS_{SRC,DOC,PORTS}ARGS) to be used when
using CVS to checkout files. We stick release tags in these helper
variables if they are defined and then use only one cvs command instead
of two cvs commands with an .ifdef to choose between them.
- rm the old src/doc/ports directories as separate commands from the
CVS comands so that the rm commands don't need to be duplicated.
- Simplify the DOMINIMALDOCPORTS case by overriding RELEASEPORTSMODULE to
be ${MINIMALDOCPORTS} thus removing yet another nearly-duplicate cvs
command in an .ifdef.
- Add support for grabbing src/ and doc/ from external directories
specified via EXTSRCDIR and EXTDOCDIR instead of from CVS. The same
is not done for ports/ quite yet as the DOMINIMALDOCPORTS case is a
bit tricky.
The rerelease target scripts have not been changed to use the helper
variables yet, so there is still some room for improvement.
Submitted by: kuriyama (4)
works on sparc64, this document can now use (almost) the same
procedures as i386, et al. CDROM booting instructions are cut-and-pasted
from the older sparc64/install.sgml file, which is now unlinked from
the document build.
This document is a long ways from perfect, but it's better than shipping
instructions for an installation procedure that doesn't apply anymore.
While here, add some SGML comments to help others navigate the sources.
descriptors that have the close-on-exec flag set, as that will have no
effect anyway and might screw something else up if the file descriptor
happens to be shared with another process.
PR: standards/43335
MFC after: 1 week
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible
Reviewed by: many
Approved by: re
o don't strip the Ethernet header from inbound packets; pass packets
up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls
Reviewed by: many
Approved by: re
o use if_input for input packet processing
o don't strip the Ethernet header for input packets
o use BPF_* macros bpf tapping
o call ether_ioctl to handle default ioctl case
o track vlan changes
Reviewed by: many
Approved by: re
drivers "tag packets" with an m_tag and the input packet handling recognizes
such packets and does the right thing
o track the number of active vlans on an interface; this lets lots of places
only do vlan-specific processing when needed
o track changes to ether_ifdetach/ether_ifattach
o track bpf changes
o eliminate the use of M_PROTO1 for communicating to drivers about tagged
packets
o eliminate the use of IFF_LINK0 for drivers communicating to the vlan code
that they support h/w tagging; replaced by explicit interface capabilities
o add ifnet capabilities for h/w tagging and support of "large mtu's"
o use new interface capabilities to auto-configure use of large mtu's and h/w
tagging
o add support for proper handling of promiscuous mode
o document driver/vlan communication conventions
Reviewed by: many
Approved by: re
o add if_input member for interface drivers to call through to pass packets "up"
o remove ethernet-specific function decls (moved to ethernet.h)
Reviewed by: many
Approved by: re
ether_header; instead drivers are to leave the Ethernet header at the
front of the packet
o add declarations for netgraph and vlan hooks that were removed from ethernet.h
o change various in-file calling conventions to track change in input API
o fixup bridge support to handle Ethernet header no longer being stripped
o add consistency checks to ether_input to catch problems with the change
in the API; some of these may want to be moved to #ifdef DIAGNOSTIC at a
later time (though they are not too expensive to leave as is)
o change ether_demux to eliminate the passing of the Ethernet header; it is
now expected at the front of the packet a la ether_input
o add ether_sprintf compatibility shim
o change ether_ifattach API to remove "bpf supported param" and add a pointer
to the MAC address to be installed for the LL address (this is for future
changes to divest struct arpcom from struct ifnet)
o change ether_ifdetach API to remove "bpf support param"
Reviewed by: many
Approved by: re
o ETHER_* (ETHER_ALIGN, ETHER_MAX_FRAME, ETHER_CRC_LEN, etc.)
o M_HASFCS for drivers to indicate packets include FCS
o remove global declarations for ng_ether* and vlan_* since these
represent a private contract between the if_ethersubr.c code and
certain parts of the system that should not normally be abused
o add ether_* declarations that were elsewhere
o remove ETHER_BPF_* since they are no longer used with the parameter
no longer passed to ether_ifattach and ether_ifdetach
Reviewed by: many
Approved by: re
o introduce BPF_TAP and BPF_MTAP macros to hide implementation details and
ease code portability
o use m_getcl where appropriate
Reviewed by: many
Approved by: re
Obtained from: NetBSD (multiple link type support)
architecture, mainly to avoid getting a SIGFPE signal sent
when calling strtod(3) with certain input.
The SIGFPE has been sent because the code was not aware that
a Gradual Underflow is handled in software via traps on the
Alpha architecture, but is not implemented in our Alpha kernel
layer.
With `Sudden_Underflow' defined, strtod(3) should not depend
on Gradual Underflow and adjust its calculations accordingly,
which means that other, more subtle errors than the sending of
SIGFPE could be solved by this.
Discussed with: bde
PR: alpha/12623
PR: alpha/17032
PR: alpha/43567
MFC after: 7 days
signed, since they describe a ring buffer and signed arithmetic is
performed on them. This avoids some evilish casts.
Since this changes all but two members of this structure, style(9)
those remaining ones, too.
Requested by: bde
Reviewed by: bde (earlier version)
