uerror == 0 && lerror == EACCES, lowervp == NULLVP and union_allocvp
doesn't find existing union node and new union node is created.
Sicne it is dificult to cover all the case, union_lookup always
returns when union_lookup1() returns EACCES.
Submitted by: Naofumi Honda <honda@Kururu.math.sci.hokudai.ac.jp>
Obtained from: NetBSD/pc98
reading/writing of mem and regs). Also have to check for the requesting
process being group KMEM -- this is a bit of a hack, but ps et al need it.
Reviewed by: davidg
in savedvp variable and it is used for the argument of
MOUNTTOUNIONMOUNT(). I didn't realize ap->a_vp is modified before
MOUNTTOUNIONMOUNT(), so the change by revision 1.22 is incorrect.
UN_KLOCK flag.
When UN_KLOCK is set, VOP_UNLOCK should keep uppervp locked and clear
UN_ULOCK flag. To do this, when UN_KLOCK is set, (1) union_unlock
clears UN_ULOCK and does not clear UN_KLOCK, (2) union_lock() does not
access uppervp and does not clear UN_KLOCK, and (3) callers of
vput/VOP_UNLOCK should clear UN_KLOCK. For example, vput becomes:
SETKLOCK(union_node);
vput(vnode);
CLEARKLOCK(union_node);
where SETKLOCK macro sets UN_KLOCK and CLEARKLOCK macro clears
UN_KLOCK.
Our vput calls vm_object_deallocate() --> vm_object_terminate(). The
vm_object_terminate() calls vn_lock(), since UN_LOCKED has been
already cleared in union_unlock(). Then, union_lock locks upper vnode
when UN_ULOCK is not set. The upper vnode is not unlocked when
UN_KLOCK is set in union_unlock(), thus, union_lock tries to lock
locked vnode and we get panic.
UN_ULOCK flag. This shows a locking violation but I couldn't find the
reason UN_ULOCK is not set or upper vnode is not unlocked. I added
the code that detect this case and adjust un_flags. DIAGNOSTIC kernel
doesn't adjust un_flags, but just panic here to help debug by kernel
hackers.
# mount -t union (or null) dir1 dir2
# mount -t union (or null) dir2 dir1
The function namei in union_mount calls union_root. The upper vnode
has been already locked and vn_lock in union_root causes above panic.
Add printf's included in `#ifdef DIAGNOSTIC' for EDEADLK cases.
is NULLVP, union node will have neither uppervp nor lowervp. This
causes page fault trap.
The union_removed_upper just remove union node from cache and it
doesn't set uppervp to NULLVP. Since union node is removed from
cache, it will not be referenced.
The code that remove union node from cache was copied from
union_inactive.
VOP_LINK(). The reason of strange behavior was wrong order of the
argument, that is, the operation
# ln foo bar
in a union fs tried to do
# ln bar foo
in ufs layer.
Now we can make a link in a union fs.
fix!
The ufs_link() assumes that vnode is not unlocked and tries to lock it
in certain case. Because union_link calls VOP_LINK after locking vnode,
vn_lock in ufs_link causes above panic.
Currently, I don't know the real fix for a locking violation in
union_link, but I think it is important to avoid panic.
A vnode is unlocked before calling VOP_LINK and is locked after it if
the vnode is not union fs. Even though panic went away, the process
that access the union fs in which link was made will hang-up.
Hang-up can be easily reproduced by following operation:
mount -t union a b
cd b
ln foo bar
ls
same directory pair.
If we do:
mount -t union a b
mount -t union a b
then, (1) namei tries to lock fs which has been already locked by
first union mount and (2) union_root() tries to lock locked fs. To
avoid first deadlock condition, unlock vnode if lowerrootvp is union
node, and to avoid second case, union_mount returns EDEADLK when multi
union mount is detected.
dolock is not set (that is, targetvp == overlaying vnode object).
Current code use FIXUP macro to do this, and never unlocks overlaying
vnode object in union_fsync. So, the vnode object will be locked
twice and never unlocked.
PR: 3271
Submitted by: kato
relookup() in union_relookup() is succeeded. However, if relookup()
returns non-zero value, that is relookup fails, VOP_MKDIR is never
called (c.f. union_mkshadow). Thus, pathname buffer is never FREEed.
Reviewed by: phk
Submitted by: kato
PR: 3262
by Alan Cox <alc@cs.rice.edu>, and his description of the problem.
The bug was primarily in procfs_mem, but the mistake likely happened
due to the lack of vm system support for the operation. I added
better support for selective marking of page dirty flags so that
vm_map_pageable(wiring) will not cause this problem again.
The code in procfs_mem is now less bogus (but maybe still a little
so.)
in procfs_allocvp(). This fixes at least stat() of /proc/*/mem.
stat() of /proc/*/file already worked. I think procfs_allocvp() isn't
actually called for type Pfile.
partly because the #define's for them were moved to a different
file. At least the null VOP_LOCK() no longer works, since vclean()
expects VOP_LOCK( ..., LK_DRAIN | LK_INTERLOCK, ...) to clear the
interlock. This probably only matters when simple_lock() is not
null, i.e., when there are multiple CPUs or SIMPLELOCK_DEBUG is
defined.
Call vget/VOP_UNLOCK with the correct number of
arguments. Call vn_lock where appropriate.
vfs_goneall is now replaced by VOP_REVOKE.
Submitted by: bde
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Broke locking on named pipes in the same way as locking on non-vnodes
(wrong errno). This will be fixed later.
The fix involves negative logic. Named pipes are now distinguished from
other types of files with vnodes, and there is additional code to handle
vnodes and named pipes in the same way only where that makes sense (not
for lseek, locking or TIOCSCTTY).
fcntl() and EOPNOTSUPP for flock(). POSIX specifies the weaker EINVAL
errno and the man page agrees.
Not fixed:
deadfs: always returns wrong EBADF
devfs, msdosfs: always return sometimes-wrong EINVAL
cd9660, fdesc, kernfs, portal: always return sometimes-wrong EOPNOTSUPP
procfs: always returns wrong EIO
mfs: panic?!
nfs: fudged
NetBSD uses a generic file system genfs to do return the sometimes-wrong
EOPNOTSUPP more consistently :-)(.
Found by: NIST-PCTS
also fixes a bug I've been chasing for a LONG TIME,
due to the fact that spec_bwrite is a NOP and I didn't realise it..
old symptom:
mount -t devfs devfs /mnt
mount /mnt/wd0e /mnt/mnt2
umount /mnt2 <process hangs>
there are some pretty large structural differences internal to devfs
but outwards it should look the same.
I have not yet tested extensively but will do so and fix 3 warnings tomorrow.
The interface into the "VMIO" system has changed to be more consistant
and robust. Essentially, it is now no longer necessary to call vn_open
to get merged VM/Buffer cache operation, and exceptional conditions
such as merged operation of VBLK devices is simpler and more correct.
This code corrects a potentially large set of problems including the
problems with ktrace output and loaded systems, file create/deletes,
etc.
Most of the changes to NFS are cosmetic and name changes, eliminating
a layer of subroutine calls. The direct calls to vput/vrele have
been re-instituted for better cross platform compatibility.
Reviewed by: davidg
cleaning up some of the vnode usage..
(I'm sure it still needs more..)
where can one find out what each vfs call expects to be locked
on completion, and how can one find out what each layer expects
to be freed on error.?
it only barely works so don't get too carried away..
I noticed that teh symlink is length 0..
I guess I'll fix that tomorrow..
it also sometimes panics with "cleaned vnode isn't" but it's not more
broken than it was before.. I really want to go over it with someone
who understands the lifecycle of a vnode better than I do..
terry?
kirk?
david?
john?
to information from a single process causes hangs. Specifically, this
fixes problems (hangs) with concurrent ps commands, when the system is under
heavy memory load.
Reviewed by: davidg
but not there. The extent of the object lock is expanded to be over the
range that it is needed. Additionally, clean up the code so that it conforms
to better coding style.
with multiple entries as follows:
start address, end address, resident pages in range, private pages
in range, RW/RO, COW or not, (vnode/device/swap/default).
process won't possibly block before filling in the fsnode pointer (v_data)
which might be dereferenced during a sync since the vnode is put on the
mnt_vnodelist by getnewvnode.
Pointed out by Matt Day <mday@artisoft.com>
device have reference count problems. We mark the underlying object
ono-persistent, and account for the reference count that the VM system
maintainsfor the special device close. This should fix the removable
device problem.
files are off the vendor branch, so this should not change anything.
A "U" marker generally means that the file was not changed in between
the 4.4Lite and Lite-2 releases, and does not need a merge. "C" generally
means that there was a change.
[two new auxillary files in miscfs/union]
DEVFS filesystems..
- if ( error = dev_add_name(child->name,parent->dnp
+ if ( error = dev_add_name(child->name,falias->dnp
Ok bruce, this is the one you were seeing..
This is a really ugly bandaid on the problem, but it works well enough for
'ps -u' to start working again. The problem was caused by the user
address space shrinking by a little bit and the UPAGES being "cast off" to
become a seperate entity rather than being at the top of the process's
vmspace. That optimization was part of John's most recent VM speedups.
Now, rather than decoding the VM space, it merely ensures the pages are
in core and accesses them the same way the ptrace(PT_READ_U..) code does,
ie: off the p->p_addr pointer.
Implement a "variable" directory structure. Files that do not make
sense for the given process do not "appear" and cannot be opened.
For example, "system" processes do not have "file", "regs" or "fpregs",
because they do not have a user area.
"attempt" to fill in the user area of a given process when it is being
accessed via /proc/pid/mem (the user struct is just after
VM_MAXUSER_ADDRESS in the process address space.)
Dont do IO to the U area while it's swapped, hold it in place if possible.
Lock off access to the "ctl" file if it's done a setuid like the other
pseudo-files in there.
Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish
overhead for merged cache.
Efficiency improvement for vfs_cluster. It used to do alot of redundant
calls to cluster_rbuild.
Correct the ordering for vrele of .text and release of credentials.
Use the selective tlb update for 486/586/P6.
Numerous fixes to the size of objects allocated for files. Additionally,
fixes in the various pagers.
Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs.
Fixes in the swap pager for exhausted resources. The pageout code
will not as readily thrash.
Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into
page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE),
thereby improving efficiency of several routines.
Eliminate even more unnecessary vm_page_protect operations.
Significantly speed up process forks.
Make vm_object_page_clean more efficient, thereby eliminating the pause
that happens every 30seconds.
Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the
case of filesystems mounted async.
Fix a panic with busy pages when write clustering is done for non-VMIO
buffers.
were development aids :-) and normal events.
Initialise the "hidden" blueprint mount "mnt_op" and "mnt_vfc" fields so
that a statfs() on a devfs file would not panic anymore. Fixes PR#911.
Head-scratching by: Julian and Peter
seems to work hre just fine though I can't check every file
that changed due to limmited h/w, however I've checked enught to be petty
happy withe hte code..
WARNING... struct lkm[mumble] has changed
so it might be an idea to recompile any lkm related programs
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)
If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)
pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)
add a few safety checks in specfs because
now it's possible to get entries in [cd]devsw[] which are ALL NULL
so it's better to discover this BEFORE jumping into the d_open() entry..
more check to come later.. this getsthe code to the stage where I
can start testing it, even if I haven't caught every little error case...
I guess I'll find them quick enough..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..
Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.
some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.
BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...
If you want to add a new device in conf.c
please make sure I know
so I can keep it up to date too..
as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)
it 1138 times (:-() in casts and a few more times in declarations.
This change is null for the i386.
The type has to be `typedef int vop_t(void *)' and not `typedef
int vop_t()' because `gcc -Wstrict-prototypes' warns about the
latter. Since vnode op functions are called with args of different
(struct pointer) types, neither of these function types is any use
for type checking of the arg, so it would be preferable not to use
the complete function type, especially since using the complete
type requires adding 1138 casts to avoid compiler warnings and
another 40+ casts to reverse the function pointer conversions before
calling the functions.
Should anybody out there wonder about this vendetta against global
variables, it is basically to make it more visible what our interfaces
in the kernel really are.
I'm almost convinced we should have a
#define PUBLIC /* public interface */
and use it in the #includes...
it was referenced from.. stops a rather annoying panic, but
introduces a rather interesting but "I can live with it" bug
`ln a b ; mv a b; echo ?`
returns a rather than b..
I know why but I need to think of the 'correct' answer. at least this is 'safe'
I can now do an mv on devices and directories in devfs
This was the hardest part.. link, delete and symlink will follow in
short order.
This code works but has definitly got vnode locking problems
I am electing to get the structure of it working before
spending too much time on the vnode confusion
so it's probably not reliable at the moment..
never-the less it looks good.
:)
added prototypes for every function and
put (void *) as the args to the vop array definitions.
can now compile with:
CWARNFLAGS?= -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit \
-Wnested-externs -Wstrict-prototypes -Wmissing-prototypes \
-Winline -Wstrict-prototypes
and only get errors for files external to this module:
namely
./vnode_if.h
../../sys/vnode.h
../../sys/buf.h
../../miscfs/specfs/specdev.h
changes to allow devices that don't probe (e.g. /dev/mem)
to create devfs entries
this required giving 'configure' its own SYSINIT entry
so we could duck in just before it with a DEVFS init
and some device inits..
my devfs now looks like:
./misc
./misc/speaker
./misc/mem
./misc/kmem
./misc/null
./misc/zero
./misc/io
./misc/console
./misc/pcaudio
./misc/pcaudioctl
./disks
./disks/rfloppy
./disks/rfloppy/fd0.1440
./disks/rfloppy/fd1.1200
./disks/floppy
./disks/floppy/fd0.1440
./disks/floppy/fd1.1200
also some sligt cleanups.. DEVFS needs a lot of work
but I'm getting back to it..
calls.
Found by: gcc -Wstrict-prototypes after I supplied some of the 5000+
missing prototypes. Now I have 9000+ lines of warnings and errors
about bogus conversions of function pointers.
SunOS and SCO. You can then even use the pipe as a cheap fifo stack
(yuck!). A semantic change also important (but not limited) to iBCS2
compatibility.
Submitted by: swallace
wrong vp's ops vector being used by changing the VOP_LINK's argument order.
The special-case hack doesn't go far enough and breaks the generic
bypass routine used in some non-leaf filesystems. Pointed out by Kirk
McKusick.
umountable file systems, hung processes, or system panics:
- Some operations could return without decrementing the vnode
reference count.
- Some operations could leave the vnode locked.
- Generalize the /kern/rootdev & rrootdev files so that they
are no longer special cased in kernfs_lookup().
Note: procfs, fdescfs, and most of the other miscfs/* file systems
also suffer from the same type of problems and I will work on
fixing them one at a time.
proc or any VM system structure will have to be rebuilt!!!
Much needed overhaul of the VM system. Included in this first round of
changes:
1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".
2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.
3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.
4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.
5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.
6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.
7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.
8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.
9) Some almost useless debugging code removed.
10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.
11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.
12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).
13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.
14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)
TODO:
1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.
2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.
3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.
4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.
5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).
regular user could panic the machine with a simple "tail /proc/curproc/mem"
command. The problem was twofold: both kernfs and procfs didn't fill in
the mnt_stat statfs struct (which would later lead to an integer divide
fault in the vnode pager), and kernfs bogusly paniced if a bmap was
attempted.
Reviewed by: John Dyson
if the 'time on a node is 0,..
tell the world it is the same as 'boottime'.
This is becasue 'time' is not set up when we create the nodes,
so we can't set them then.
