timer. Previously, the various divisors were fixed which meant that while
it gave somewhat reasonable stathz, etc. at hz=1000, it went off the rails
with any other hz value. With these changes, we now pick a lapic timer hz
based on the value of hz. If hz is >= 1500, then the lapic timer runs at
hz. If 1500 hz >= 750, we run the lapic timer at hz * 2. If hz < 750, we
run at hz * 4. We compute a divider at runtime to make stathz run as close
to 128 as we can since stathz really wants to be run at something close to
that frequency. Profiling just runs on every clock tick. So some examples:
With hz = 100, the lapic timer now runs at 400 instead of 2000. stathz
will be 133, and profhz = 400. With hz = 1000 (default), the lapic timer
is still at 2000 (as it is now), stathz is at 133 (as it is now), and
profhz will be 2000 (previously 666).
MFC after: 2 weeks
only in low memory situations, so the error fork of these fixes is
lightly tested, but they should do the least-wrong thing...
Submitted by: Hans Petter Selasky
userspace to kernel via nmount(), pass in the strings
"update", "snapshot", "reload".
We want to move away from passing MNT_ flags from userspace -> kernel
via nmount(), and instead favor passing the string options.
set the MNT_FORCE flag, but do not persist "force"
in the options list, since it is a command, not a persistent property
of a mount.
Similarly, when we see "reload", set MNT_RELOAD,
but delete "reload" from the options list.
MFC after: 1 week
- According to POSIX, tcsetattr() must not fail when any of the bits in
the structure are unsupported, but it must leave the unsupported flags
alone.
- The CIGNORE flag (set by TCSASOFT, extension) was not cleared from
c_cflag, which means using it would cause it to be applied during its
entire lifespan. Eventually make sure we clear the flag.
I don't really like CIGNORE, but I think we must keep it alive right
now. With our new TTY layer, we don't actually need this mechanism,
because if you leave c_cflag, c_ispeed and c_ospeed alone, we won't make
a call into the device driver anyway.
Reported by: naddy
Tested by: naddy
thread_unsuspend_one() needs to optionally wakeup the swapper. Since we
hold the thread lock for that entire function, however, we have to push
that requirement up into the caller.
Found by: rwatson
sntp includes a copy of libopts in itself in vendor code, rewrite the
Makefile to compile and use only one copy. It is an internal library, not
installed.
MFC after: 2 weeks
Unlike pre-MPSAFE TTY, the pts(4) driver always returned ENXIO when a
read() or write() was performed on a pseudo-terminal master device when
the slave device was not opened. The old implementation had different
semantics:
- When the slave device had not been opened yet, read() and write() just
blocked.
- When the slave device had been closed, a read() call would return 0
bytes length.
- When the slave device had been closed, a write() call would return
EIO.
Change the new implementation to return 0 and EIO as well. We don't
implement the first rule, but I suspect this is not needed, because
routines like openpty() also open the slave device node. posix_openpt()
users also do similar things.
Reported by: rink
Tested by: rink
For gcc' __builtin_frame_address() to work, all call frames need to save
frame pointer. In particular, this is important for the upper frame that
should terminate the chain.
No objections from: jhb
PR: amd64/126543
MFC after: 1 week
counters for Rx/Tx statistics. Various counters in ifnet is also
updated with these hardware counters.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
It turned out we transmitted VSTART after each successful read on a TTY
when software flow control was turned on. This was because of a very
evil bug where we tested the TF_HIWAT_IN flag the other way around.
Reported by: Christian Weisgerber <naddy mips inka de>
interrupt mask register again. This saves one register access per
each interrupt.
Also don't try to process frames when driver is not running.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
The number of blocks read from ustar archives is just an implementation
difference. The failure of bsdcpio to emit a block count to stderr
in -p mode is a real bug in bsdcpio.
- Rename pciereg_cfgopen() to pcie_cfgregopen() and expose it to the
rest of the kernel. It now also accepts parameters via function
arguments rather than global variables.
- Add a notion of minimum and maximum bus numbers and reject requests for
an out of range bus.
- Add more range checks on slot/func/reg/bytes parameters to the cfg reg
read/write routines. Don't panic on any invalid parameters, just fail
the request (writes do nothing, reads return -1). This matches the
behavior of the other cfg mechanisms.
- Port the memory mapped configuration space access to amd64. On amd64
we simply use the direct map (via pmap_mapdev()) for the memory mapped
window.
- During acpi_attach() just after loading the ACPI tables, check for a
MCFG table. If it exists, call pciereg_cfgopen() on each subtable
(memory mapped window). For now we only support windows for domain 0
that start with bus 0. This removes the need for more chipset-specific
quirks in the MD code.
- Remove the chipset-specific quirks for the Intel 5000P/V/Z chipsets
since these machines should all have MCFG tables via ACPI.
- Updated pci_cfgregopen() to DTRT if ACPI had invoked pcie_cfgregopen()
earlier.
MFC after: 2 weeks
following the archive structure. In particular, it no longer
crashes if you run it against GNU cpio 2.9 (although it does
still complain a lot more than it should).
link state and detach request.
While I'm here make sure established link is IFM_10_T or
IFM_100_TX as bfe(4) just supports 10/100Mbps media.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
