Add a seatbelt to the Nested TLB Fault handler to give us a chance
to panic when we have an unexpected TLB fault while interrupt
collection is disabled.
o Introduce vm_sync_icache() for making the I-cache coherent with
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).
- Add the 'cmp' and 'core' pseudo-busses which are used to group CPU cores
to the exclusion lists as the CPU nodes aren't handled as regular devices
either. Also add the pseudo-devices found in Sun Fire V1280.
- Allow nexus_attach() and nexus_alloc_resource() to be used by drivers
derived from nexus(4) for subordinate busses.
- Don't add the zero-sized memory resources of glue devices to the resource
lists.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the CPUs as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
It would be great if we could use newbus to deal with the different ways
the 'cpu' devices can hang off of pseudo ones but unfortunately both
cpu_mp_setmaxid() and sparc64_init() have to work prior to regular device
probing.
- Add support for UltraSPARC IV and IV+ CPUs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
This involves changing the MD KTR code to not directly read the UPA
module ID either. We use the MID stored in the per-CPU data instead of
calling cpu_get_mid() as a replacement in order prevent clobbering any
registers as side-effect in the assembler version. This requires CATR()
invocations from mp_startup() prior to mapping the per-CPU pages to be
removed though.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Make sparc64_shutdown_final() static as it's not used outside of
machdep.c.
- At least the trap table of the Sun Fire V1280 firmware apparently has
no cleanwindows handler so just remove trying to trigger it from _start
and the AP trampoline code as that leads to a crash there. This should
be okay as leaking data from the OFW via the CPU registers on start of
the kernel should be no real concern.
- Make the comments of _start and the AP trampoline code regarding the
initializations they perform match each other and reality.
- Make the comments of the AP trampoline code regarding iTLB accesses
refer to the right macro.
Use the SUNW,{d,i}tlb-load methods for entering locked TLB entries like
OpenBSD and OpenSolaris do instead of fiddling with the MMUs ourselves.
Unlike direct access the firmware methods don't automatically use the
next free (?) TLB slot, instead the slot to be used has to be specified.
We allocate the TLB slots for the kernel top-down as OpenSolaris suggests
that the firmware will always allocate the ones for its own use bottom-up.
Besides being simpler, according to OpenBSD using the firmware methods is
required to allow booting on Sun Fire E10K with multi-systemboard domains.
- Assert that HEAPSZ is a multiple of PAGE_SIZE as at least the firmware
of Sun Fire V1280 doesn't round up the size itself but instead lets
claiming of non page-sized amounts of memory fail.
- Change parameters and variables related to the TLB slots to unsigned
which is more appropriate.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the BSP as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
- Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Check the return value of init_heap(). This requires moving it after
cons_probe() so we can panic when appropriate. This should be fine as
the PowerPC OFW loader uses that order for quite some time now.
- Remove the BUS_HANDLE_MIN checking in the __BUS_DEBUG_ACCESS macro;
for UPA it should have fulfilled its purpose by now and Fireplane-
and JBus-based machines are way to messy in organization to implement
something equivalent.
- Fix a bunch of style(9) bugs.
- Const'ify the bus_stream_asi and bus_type_asi arrays.
- Replace hard-coded functions names missed in bus_machdep.c with __func__.
- Break some long lines.
- While SPARC V9 allows tininess to be detected either before or after
rounding (impl. dep. #55), the SPARC JPS1 responsible for SPARC64 and
UltraSPARC processors defines that in all cases tinyness is detected
before rounding, therefore rounding up to the smallest normalised
number should set the underflow flag.
- If an infinite result is rounded down, the result should have an
exponent 1 less than the value for infinity.
PR: 144900
Submitted by: Peter Jeremy
Division should take both arguments' signs into account when the
the dividend is infinity or zero and the divisor is not the same.
PR: 144900
Submitted by: Peter Jeremy
Checkin a facility for specifying a passthrough FIB from userland.
arcconf tool by Adaptec already seems to use for identifying the
Serial Number of the devices.
Sponsored by: Sandvine Incorporated
Improving the clocks auto-tunning by firstly checking if the atrtc may be
correctly initialized and just then assign to softclock/profclock.
Sponsored by: Sandvine Incorporated
Remove GNU cpio after fix of CVE-2010-0624.
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Fix stupid typos. Some VESA BIOSes directly call BIOS interrupt handlers
within the VBE interrupt handler. Unfortunately it was causing real mode
page faults because we were fetching instructions from bogus addresses.
PR: kern/144654
Handling all the three clocks with the LAPIC may lead to aliasing for
softclock and profclock.
Revert the change when the LAPIC started taking charge of all three of
them.
Sponsored by: Sandvine Incorporated
the problems related to the handling of broken DNSSEC trust chains.
This fix is only relevant for those who have DNSSEC validation
enabled and configure trust anchors from third parties, either
manually, or through a system like DLV.
r204019:
Include command type in COMMAND TIMEOUT messages to aid in debugging.
r203885:
Diff reduction with Adaptec's vendor driver.
Driver version 2.1.9 chosen as that Adaptec version roughly corresponds
with the current feature set merged to the in-tree driver.
r203801:
Garbage collect Falcon/PPC support that has not been used in released
products, based on discussion with Adaptec.
r198617:
Rename aac_srb32 to aac_srb, to match Adaptec's vendor driver.
Minor diff reduction with Adaptec's driver: in aac_release_command() set
cm_queue to AAC_ADAP_NORM_CMD_QUEUE by default. In every place it was
set, it was set to AAC_ADAP_NORM_CMD_QUEUE anyhow.
This waits for the requested process(es) to terminate, rather than polling
with an interval of 2 seconds.
If pwait is not available, the old method is used.
PR: conf/132766
