It appears that production versions of EPYC firmware get the _STA method right
for these nodes. In fact, this workaround breaks on production hardware by
including too many uart nodes. This work around was for pre-release hardware
that wound up not having a large deployment. Move this work around to a kernel
option since the machines that needed it have been powered off and are difficult
to resurrect. Should there be a more significant deployment than is understood,
we can restrict it based on smbios strings.
Discussed with: mmacy@, seanc@, jhb@
MFC After: 3 days
Historically receive buffer overflows have been ignored and programs
could not tell if they missed messages or messages had been truncated
because of overflows. Since programs historically do not expect to get
receive overflow errors, this behavior is not the default.
This is really really important for programs that use route(4) to keep in sync
with the system. If we loose a message then we need to reload the full system
state, otherwise the behaviour from that point is undefined and can lead
to chasing bogus bug reports.
This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
Since we ship a ktls(4) enabled OpenSSL version, mention
the src.conf(5) option WITH_OPENSSL_KTLS in the manual page.
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28435
A BIOS bug may apparently cause the BSP to report that it does not
implement CMCI, with some APs reporting that they do. In this scenario,
avoid a NULL pointer dereference that occurs in cmci_monitor() because
cmc_state was not allocated by the BSP.
PR: 253272
Reported by: asomers, mmacy
Reviewed by: kib (previous version)
MFC after: 1 week
The C variant in libkern performs excessive branching to find the
non-zero byte instead of using the bsfq instruction. The same code
patched to use it is still slower than the routine implemented here
as the compiler keeps neglecting to perform certain optimizations
(like using leaq).
On top of that the routine can is a starting point for copyinstr
which operates on words instead of bytes.
Tested with glibc test suite.
Sample results (calls/s):
Haswell:
$(perl -e "print 'A' x 3"):
stock: 211198039
patched:338626619
asm: 465609618
$(perl -e "print 'A' x 100"):
stock: 83151997
patched: 98285919
asm: 120719888
AMD EPYC 7R32:
$(perl -e "print 'A' x 3"):
stock: 282523617
asm: 491498172
$(perl -e "print 'A' x 100"):
stock: 114857172
asm: 112082057
The basic issue here is that grep, when given -m 1, would stop all
line processing once it hit the match count and exit immediately. The
problem with exiting immediately is that -A processing only happens when
subsequent lines are processed and do not match.
The fix here is relatively easy; when bsdgrep matches a line, it resets
the 'tail' of the matching context to the value supplied to -A and
dumps anything that's been queued up for -B. After the current line has
been printed and tail is reset, we check our mcount and do what's
needed. Therefore, at the time that we decide we're doing nothing, we
know that 'tail' of the context is correct and we can simply continue
on if there's still more to pick up.
With this change, we still bail out immediately if there's been no -A
flag. If -A was supplied, we signal that we should continue on. However,
subsequent lines will not even bothere to try and process the line. We
have reached the match count, so even if the next line would match then
we must process it if it hadn't. Thus, the loop in procfile() can
short-circuit and just process the line as a non-match until
procmatches() indicates that it's safe to stop.
A test has been added to reflect both that we should be picking up the
next line and that the next line should be considered a non-match even
if it should have been.
PR: 253350
MFC-after: 3 days
vt is using static buffers for on screen data, the buffer size is
calculated based on maximum supported screen size and 8x16 font.
When using hi-res graphics and very smaller than 8x16 font, we
need to be careful not to overflow static buffers in vt.
Testing: I did test by building smaller buffers than vt currently is using,
royger was testing on actual 4k capable hardware.
MFC after: 1 week
Tested by: royger
When performing encryption in software, the KTLS crypto callback always
locks the session to deliver a wakeup. But, if we're handling the
operation synchronously this is wasted effort and can result in
sleepqueue lock contention on large systems.
Use CRYPTO_SESS_SYNC() to determine whether the operation will be
completed asynchronously or not, and select a callback appropriately.
Avoid locking the session to check for completion if the session handles
requests synchronously.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28195
Currently, OpenCrypto consumers can request asynchronous dispatch by
setting a flag in the cryptop. (Currently only IPSec may do this.) I
think this is a bit confusing: we (conditionally) set cryptop flags to
request async dispatch, and then crypto_dispatch() immediately examines
those flags to see if the consumer wants async dispatch. The flag names
are also confusing since they don't specify what "async" applies to:
dispatch or completion.
Add a new KPI, crypto_dispatch_async(), rather than encoding the
requested dispatch type in each cryptop. crypto_dispatch_async() falls
back to crypto_dispatch() if the session's driver provides asynchronous
dispatch. Get rid of CRYPTOP_ASYNC() and CRYPTOP_ASYNC_KEEPORDER().
Similarly, add crypto_dispatch_batch() to request processing of a tailq
of cryptops, rather than encoding the scheduling policy using cryptop
flags. Convert GELI, the only user of this interface (disabled by
default) to use the new interface.
Add CRYPTO_SESS_SYNC(), which can be used by consumers to determine
whether crypto requests will be dispatched synchronously. This is just
a helper macro. Use it instead of looking at cap flags directly.
Fix style in crypto_done(). Also get rid of CRYPTO_RETW_EMPTY() and
just check the relevant queues directly. This could result in some
unnecessary wakeups but I think it's very uncommon to be using more than
one queue per worker in a given workload, so checking all three queues
is a waste of cycles.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28194
This makes it easier to refactor the GCM code to operate on
crypto_buffer_cursors rather than plain contiguous buffers, with the aim
of minimizing the amount of copying and zeroing done today.
No functional change intended.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28500
- We were only hashing up to the first 16 bytes of the AAD.
- When computing the digest during decryption, handle the case where
len == trailer, i.e., len < AES_BLOCK_LEN, properly.
While here:
- trailer is always smaller than AES_BLOCK_LEN, so remove a pair of
unnecessary modulus operations.
- Replace some byte-by-byte loops with memcpy() and memset() calls.
In particular, zero the full block before copying a partial block into
it since we do that elsewhere and it means that the memset() length is
known at compile time.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28501
This makes it a bit more straightforward to add new counters when
debugging. No functional change intended.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28498
Allocate the necessary memory for the conversion dynamically starting
with a value which is sufficient for almost all normal cases.
PR: 187835
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D23840
Microoptimize set_syscall_retval() for arm64 by predicting
the return value to be zero. This is similar to what has
been done for other architectures
Reviewed By: emaste, mhorne
Differential Revision: https://reviews.freebsd.org/D26991
While here, also recommend that loader.conf(5) should only be used in
order to get to mountroot, as rc(8) is less fragile, faster, and is
easier to fix by booting to single-user mode instead of having to
blacklist modules in the loader.
MFH: 2 weeks
Current epoll implementation stores udata fields of epoll_event
structure in special dynamically-sized table rather than in udata field
of backing kevent structure because of 2 reasons:
1. Kevent's udata size is smaller than epoll's on 32-bit archs.
2. Kevent's udata can be clobbered on execution EPOLL_CTL_ADD as kqueue
modifies existing event while epoll returns error in this case.
After r320043 has introduced four new 64bit user data members (ext[]),
we can store epoll udata in one of them and drop aforementioned table.
According to kqueue_register() source code ext members are not updated
when existing kevent is modified that fixes p.2.
As a side effect the patch fixes PR/252582.
Reviewed by: trasz
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D28169
In 78599c32ef, CFI endproc decoration was
added to locore64.S. However, it missed the subtle detail that
__restartkernel_virtual() falls through to __restartkernel(). This was
causing boot failure on PowerMac G5, as it tried to execute the
epilogue as code.
Fix this by branching to __restartkernel() instead of intentionally
running off the end of the function.
While here, add some additional notes on how the virtual mode restart
works.
MFC after: 3 days
It returns "unconfined", like Linux without SELinux would.
Sponsored By: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28164
The data path in netgraph is designed to work on an read only state of
the whole netgraph network. Currently this is achived by convention,
there is no technical enforcment. In the case of NETGRAPH_DEBUG all
nodes can be annotated for debugging purposes, so the strict
enforcment needs to be lifted for this purpose.
This patch is part of a series to make ng_bridge multithreaded, which
is done by rewrite the data path to operate on const.
Reviewed By: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28141
The data path in netgraph is designed to work on an read only state of
the whole netgraph network. Currently this is achived by convetion,
there is no technical enforcment. This patch is part of a series to
make ng_brigde multithreaded, which is done by rewrite the data path
to const handling.
Reviewed By: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28141
This was announced to happen after the 12 relases.
Remove a depeciated ABI.
The complete removal is for HEAD only. I'll remove the #define in
stable/13 as MFC, so the code will still exist in 13.x, but will not
included by default. Earlier versions will not be affected.
Reviewed by: kp
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28518
Previously the flags were passed as-is, which could resulted
in spurious EAGAIN returned for non-blocking sockets, which
broke some Steam games.
PR: 248065
Reported By: Alex S <iwtcex@gmail.com>
Tested By: Alex S <iwtcex@gmail.com>
Reviewed By: emaste
MFC After: 3 days
Sponsored By: The FreeBSD Foundation
This is the first patch of a series of necessary steps
to make ng_bridge(4) multithreaded.
Reviewed by: melifaro (network), afedorov
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28125
Handling of unknown MACs on an bridge with incomplete learning
capabilites (aka uplink ports) can be defined in different ways.
The classical approach is to broadcast unicast frames send to an
unknown MAC, because the unknown devices can be everywhere. This mode
is default for ng_bridge(4).
In the case of dedicated uplink ports, which prohibit learning of MAC
addresses in order to save memory and CPU cycles, the broadcast
approach is dangerous. All traffic to the uplink port is broadcasted
to every downlink port, too. In this case, it's better to restrict the
distribution of frames to unknown MAC to the uplink ports only.
In order to keep the chance small and the handling as natural as
possible, the first attached link is used to determine the behaviour
of the bridge: If it is an "uplink" port, then the bridge switch from
classical mode to restricted mode.
Reviewed By: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28487
The ng_bridge(4) node is designed to work in moderately small
environments. Connecting such a node to a larger network rapidly fills
the MAC table for no reason. It even become complicated to obtain data
from the gettable message, because the result is too large to
transmit.
This patch introduces, two new functionality bits on the hooks:
- Allow or disallow MAC address learning for incoming patckets.
- Allow or disallow sending unknown MACs through this hook.
Uplinks are characterized by denied learing while sending out
unknowns. Normal links are charaterized by allowed learning and
sending out unknowns.
Reviewed by: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23963
The ipfilter NAT table host map size is a tunable that defaults to
a macro value defined at build time. HOSTMAP_SIZE is saved in softn
(the ipnat softc) at initialization. It can be tuned (changed) at runtime
using the ipf -T command. If the hostmap_size tunable is adjusted the
calculation to determine where to put new entries in the table was
incorrect. Use the tunable in the NAT softc instead of the static build
time value.
MFC after: 1 week
lang/rust needs COMPAT_FREEBSD11 to build, even though powerpc64le itself is supported only since 13.0.
I also corrected a comment, because if we ever have lib32 for powerpc64le, it will be for powerpcle.
Reviewed by: bdragon (on IRC)
Examples of inconsistencies with the current state:
- references LRU of all entries, removed years ago
- references a non-existent lock (neglist)
- claims negative entries have a NULL target
It will be replaced with a more accurate and more informative
description.
In the meantime take it out so it stops misleading.
