Prefer setvbuf() to setlinebuf() for portability.
Some style(9) and redundant tests for NULL.
These are only meant to ease up merging newer changes but we are skipping
changes done in order to accomodate OpenBSD's pledge support.
Obtained from: OpenBSD
MFC after: 2 weeks
fail in the Capability mode. Instead silently fallback to the syscall
method, which is done for example in the gettimeofday(2) function.
Reviewed by: kib
The pl011 UART has a 16 entry Tx FIFO and a 16 entry Rx FIFO that
have not been used so far. Update the driver to enable the FIFOs
and use them in transmit and receive.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D8819
directly from the node.
- Use ni_txparms directly instead of calculating them manually every time
- Move M_EAPOL flag check upper; otherwise it may be skipped due to
'ucastrate' / 'mcastrate' check
- Use 'mgtrate' for control frames too (see ifconfig(8), mgtrate parameter)
- Add few more M_EAPOL checks where it was missing (zyd(4), ural(4),
urtw(4))
- Few unrelated cleanups
Tested with:
- Intel 6205 (iwn(4)), STA mode;
- WUSB54GC (rum(4)), HOSTAP mode + RTL8188EU (rtwn(4)), STA mode.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D9811
PG_PROMOTED, that indicates whether lingering 4KB page mappings might
need to be flushed on a PDE change that restricts or destroys a 2MB
page mapping. This flag allows the pmap to avoid range invalidations
that are both unnecessary and costly.
Reviewed by: kib, markj
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D9665
If we asked to send sense data by setting CAM_SEND_SENSE, but SIM didn't
confirm transmission by setting CAM_SENT_SENSE, assume it was not sent.
Queue the I/O back to CTL for later REQUEST SENSE with ctl_queue_sense().
This is needed for error reporting on SPI HBAs like ahc(4)/ahd(4).
MFC after: 2 weeks
Since Linux 4.9-4.10 DTS doesn't have clocks under /clocks but only a ccu node.
Currently only H3 is supported with almost the same state as HEAD.
(video pll aren't supported for now but we don't support video).
This driver and clocks will also be used for other SoC (A64, A31, H5, H2 etc ...)
Reviewed by: jmcneill
Differential Revision: https://reviews.freebsd.org/D9517
Its more important for SPI HBAs, as they don't support CDBs above 12 bytes.
The new error code makes CAM to fall back to alternative commands.
MFC after: 2 weeks
The ifdefs were '#if !defined(__i386__) || !defined(PC98)' previously,
so cpu_idle_acpi was enabled both i386 and amd64 except PC98.
I was obfuscated by '#if !defined(__i386__)' condition.
Submitted by: bde
Reported by: bde
This allows to properly handle cases when target wants to receive or send
more data then initiator wants to send or receive. Previously in such
cases isp(4) returned CAM_DATA_RUN_ERR, while now it returns resid > 0.
MFC after: 2 weeks
This change removes limitation of single S/G list entry and limitation on
maximal I/O size, using multiple data transfers per I/O if needed. Also
it removes code duplication between send and receive paths, which are now
completely equal.
In particular, don't set the synchronized bit for the peer unless it truly
appears to be synchronized to us. Also, don't set our own synchronized bit
unless we have actually seen a remote system.
Prior to this change, we were seeing some strange behavior, such as:
1. We send an advertisement with the Activity, Aggregation, and Default
flags, followed by an advertisement with the Activity, Aggregation,
Synchronization, and Default flags. However, we hadn't seen an
advertisement from another peer and were still advertising the default
(NULL) peer. A closer examination of the in-kernel data structures (using
kgdb) showed that the system had added the default (NULL) peer as a valid
aggregator for the segment.
2. We were receiving an advertisement from a peer that included the
default (NULL) peer instead of including our system information. However,
we responded with an advertisement that included the Synchronization flag
for both our system and the peer. (Since the peer's advertisement did not
include our system information, we shouldn't add the synchronization bit
for the peer.)
This patch corrects those two items.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9485
7570 tunable to allow zvol SCSI unmap to return on commit of txn to ZIL
illumos/illumos-gate@1c9272b8611c9272b861https://www.illumos.org/issues/7570
Based on the discovery that every unmap waits for the commit of the txn to the ZIL,
introducing a very high latency to unmap commands, this behavior was made into a
tunable zvol_unmap_sync_enabled and set to false. The net impact of this change is
that by default SCSI unmap commands will result in space being freed within the zvol
(today they are ignored and returned with good status). However, unlike the code
today, instead of 18+ms per unmap, they take about 30us.
With the testing done on NTFS against a Win2k12 target, the new behavior should work
seamlessly. Files on the zvol that have already been set with the zfree application
will continue to write 0's when deleted, and any new files created since zvol
creation will send unmap commands when deleted. This behavior exists today, but with
this change the unmap commands will be processed and result in reclaim of space.
Author: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
illumos/illumos-gate@1c9272b8611c9272b861https://www.illumos.org/issues/7570
Based on the discovery that every unmap waits for the commit of the txn to the ZIL,
introducing a very high latency to unmap commands, this behavior was made into a
tunable zvol_unmap_sync_enabled and set to false. The net impact of this change is
that by default SCSI unmap commands will result in space being freed within the zvol
(today they are ignored and returned with good status). However, unlike the code
today, instead of 18+ms per unmap, they take about 30us.
With the testing done on NTFS against a Win2k12 target, the new behavior should work
seamlessly. Files on the zvol that have already been set with the zfree application
will continue to write 0's when deleted, and any new files created since zvol
creation will send unmap commands when deleted. This behavior exists today, but with
this change the unmap commands will be processed and result in reclaim of space.
Author: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
When we was compering it to code from boot2 it also looks like
this code is buggy and boot2 was never updated to use this code.
USE_XREAD flag is unused in boot2, and common/drv.c was never
build with that flag.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D9780
While there, make a change to not evict a first buffer outside the
requested eviciton range.
To do:
- give more consistent names to the size variables
- upstream to OpenZFS
PR: 216178
Reported by: lev
Tested by: lev
MFC after: 2 weeks
callout(9) prohibits callout functions from sleeping.
illumos mutexes are emulated using sx(9).
spa_deadman() calls vdev_deadman() and the latter acquires vq_lock.
As a result we can get a more confusing panic instead of a specific
panic or no panic:
sleepq_add: td 0xfffff80019669960 to sleep on wchan 0xfffff8001cff4d88 with sleeping prohibited
This change adds another level of indirection where the deadman
callout schedules spa_deadman() to be executed on taskqueue_thread.
While there, use callout_schedule(0 instead of callout_reset()
in spa_sync().
Discussed with: mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9762
A comment near kmem_reclaim() implies that we already did that.
Calling the hook is useful, because some handlers, e.g. ARC,
might be able to release significant amounts of KVA.
Now that we have more than one place where vm_lowmem hook is called,
use this change as an opportunity to introduce flags that describe
a reason for calling the hook. No handler makes use of the flags yet.
Reviewed by: markj, kib
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9764
6676 Race between unique_insert() and unique_remove() causes ZFS fsid change
illumos/illumos-gate@40510e8eba40510e8ebahttps://www.illumos.org/issues/6676
The fsid of zfs filesystems might change after reboot or remount. The problem seems to
be caused by a race between unique_insert() and unique_remove(). The unique_remove()
is called from dsl_dataset_evict() which is now an asynchronous thread. In a case the
dsl_dataset_evict() thread is very slow and calls unique_remove() too late we will end
up with changed fsid on zfs mount.
This problem is very likely caused by #5056.
Steps to Reproduce
Note: I'm able to reproduce this always on a single core (virtual) machine. On multicore
machines it is not so easy to reproduce.
# uname -a
SunOS openindiana 5.11 illumos-633aa80 i86pc i386 i86pc Solaris
# zfs create rpool/TEST
# FS=$(echo ::fsinfo | mdb -k | grep TEST | awk '{print $1}')
# echo $FS::print vfs_t vfs_fsid | mdb -k
vfs_fsid = {
vfs_fsid.val = [ 0x54d7028a, 0x70311508 ]
}
# zfs umount rpool/TEST
# zfs mount rpool/TEST
# FS=$(echo ::fsinfo | mdb -k | grep TEST | awk '{print $1}')
# echo $FS::print vfs_t vfs_fsid | mdb -k
vfs_fsid = {
vfs_fsid.val = [ 0xd9454e49, 0x6b36d08 ]
}
#
Impact
The persistent fsid (filesystem id) is essential for proper NFS functionality.
If the fsid of a filesystem changes on remount (or after reboot) the NFS
clients might not be able to automatically recover from such event and the
manual remount of the NFS filesystems on every NFS client might be needed.
Author: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Dan Vatca <dan.vatca@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
This code was disabled due to its high memory usage. But now we need this
functionality for cfumass(4) frontend, since USB MS BBB transport does not
support autosense.
MFC after: 2 weeks
Thread might create a condition for delayed SU cleanup, which creates
a reference to the mount point in td_su, but exit without returning
through userret(), e.g. when terminating due to single-threading or
process exit. In this case, td_su reference is not dropped and mount
point cannot be freed.
Handle the situation by clearing td_su also in the thread destructor
and in exit1(). softdep_ast_cleanup() has to receive the thread as
argument, since e.g. thread destructor is executed in different
context.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks