sys/boot/fdt/Makefile
sys/boot/uboot/fdt/Makefile
sys/boot/uboot/lib/Makefile
This causes compilation issues on MIPS due to trying to link PIC with non-PIC
code. This revision includes bsd.stand.mk in the above files.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5311
Although this may not be an issue in practice, it would be more correct if the 64-bit version was used. Also, using the 64-bit version would make it easier to add support for 64-bit ubldr on MIPS.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5310
SoCs and various chips (including, famously, their wifi chips.)
This is "just" (all 20,000 lines of it) code to enumerate the various
versions of busses inside these devices, including the PCI bridge and
the direct SIBA bridge found in MIPS chips.
It also includes shared code for some bus operations (suspend, resume, etc);
EEPROM/SROM/etc parsing and other things that are shared between chips.
Eventually this'll replace the code that bwi/bwn uses for the internal
bus, as well as some apparently upcoming mips74k broadcom SoC support
which uses bwn!
Thanks to Landon Fuller <landonf@landonf.org> for all this work!
Obtained from: https://github.com/landonf/freebsd/compare/user/landonf/bcm4331-CURRENT
The HDMI driver will attach a framebuffer device when a display is
connected. If the EDID can be read and contains a preferred mode, it
will be used. Otherwise the framebuffer will default to 800x600.
In addition, if the EDID contains a CEA-861 extension block and the
"basic audio" flag is set, audio playback at 48kHz 16-bit stereo is
enabled on the controller.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5383
This addresses a number of race conditions that can cause crashes as a
result of unsynchronized access to the list.
PR: 206904
Tested by: Larry Rosenman <ler@lerctr.org>,
Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D5315
- Set td_errno so that ktrace and dtrace can obtain the syscall error
number in the usual way.
- Pass negative error numbers directly to the syscall layer, as they're
not intended to be returned to userland.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5425
-fPIC has no effect on linking although it seems to be ignored by
GNU ld.bfd. However, it causes ld.lld to terminate with an invalid
argument error.
Reviewed by: dchagin, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5444
driver. This mostly involves selecting the register offsets to use at
runtime based on the hardware we are talking to.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5327
On Pass2.0 can trigger interrupt on both timer and CQ count.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5423
This is not needed and causes revid register of the PCI
configuration space to clear on Pass2.0.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5421
Don't postpone Tx if the Tx lock can be acquired now.
This gives 3x better performance on egress.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5325
VNIC manages counters in hardware hence it is desired to have this
option enabled to avoid redundant stats update in ether_input_internal().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5323
Support for software LRO when enabled in the capabilities
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5321
- The network controller verifies Rx TCP/UDP/SCTP checksums by default.
Communicate this to the stack when the packet is not marked as erroneous
to avoid redundant checksum calculation in kernel.
- It is not uncommon to get the mbuf with m_len that is less than
the minimal size for the IP, TCP, UDP, etc. when HW checsumming
is enabled. To avoid data corruption performed by the HW that is
intended to write IP and TCP/UDP/SCTP checksums to the data segment,
the mbuf needs to be pulled up by the required number of bytes.
- Make sure that one can modify the mbufs that require checsum calculation
rather than check for NULL mbuf on each transmission.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5320
will be needed when we bring in further support for these SoCs.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5340
In the DIOCRSETADDRS ioctl() handler we allocate a table for struct pfr_addrs,
which is processed in pfr_set_addrs(). At the users request we also provide
feedback on the deleted addresses, by storing them after the new list
('bcopy(&ad, addr + size + i, sizeof(ad));' in pfr_set_addrs()).
This means we write outside the bounds of the buffer we've just allocated.
We need to look at pfrio_size2 instead (i.e. the size the user reserved for our
feedback). That'd allow a malicious user to specify a smaller pfrio_size2 than
pfrio_size though, in which case we'd still read outside of the allocated
buffer. Instead we allocate the largest of the two values.
Reported By: Paul J Murphy <paul@inetstat.net>
PR: 207463
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D5426
For sources and destinations marked "noincr", the previous code was
incorrectly programming the dedicated DMA channel control register
using bit definitions for normal DMA channels. This code path is not
currently used, but will be used by the HDMI audio driver in review.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5382
Copy the data into temprorary malloced buffer and drop the lock for
copyout.
Reported, reviewed and tested by: cem
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
This will generate dependencies rather than depending on the previous behavior
of depending on the guessed OBJS: *.h dependecies or a user running
'make depend'.
Experimentation showed that depending only on headers was not enough and
prone to .ORDER errors. Downstream users may also have added
dependencies into beforedepend or afterdepend targets. The safest way to
ensure dependencies are generated before build is to run 'make depend'
beforehand rather than just depending on DPSRCS+SRCS.
Note that the OBJS_DEPEND_GUESS mechanism (a.k.a .if !exists(.depend) then
foo.o: *.h) is still useful as it improves incremental builds with missing
.depend.* files and allows 'make foo.o' to usually work, while this
'beforebuild: depend' ensures that the build will always find all dependencies.
The 'make foo.o' case has no means of a 'beforebuild' hook.
This also removes several hacks in the DIRDEPS_BUILD:
- NO_INSTALL_INCLUDES is no longer needed as it mostly was to work around
.ORDER problems with building the needed headers early.
- DIRDEPS_BUILD: It is no longer necesarry to track "local dependencies" in
Makefile.depend.
These were only in Makefile.depend for 'clean builds' since nothing would
generate the files due to skipping 'make depend' and early dependency
bugs that have been fixed, such as adding headers into SRCS for the
OBJS_DEPEND_GUESS mechanism. Normally if a .depend file does not exist then
a dependency is added by bsd.lib.mk/bsd.prog.mk from OBJS: *.h. However,
meta.autodep.mk creates a .depend file from created meta files and inserts
that into Makefile.depend. It also only tracks *.[ch] files though which can
miss some dependencies that are hooked into 'make depend'. This .depend
that is created then breaks incremental builds due to the !exists(.depend)
checks for OBJS_DEPEND_GUESS. The goal was to skip 'make depend' yet it only
really works the first time. After that files are not generated as expected,
which r288966 tried to address but was using buildfiles: rather than
beforebuild: and was reverted in r291725. As noted previously,
depending only on headers in beforebuild: would create .ORDER errors
in some cases.
meta.autodep.mk is still used to generate Makefile.depend though via:
gendirdeps: Makefile.depend
.END: gendirdeps
This commit allows removing all of the "local dependencies" in
Makefile.depend which cuts down on churn and removes some of the
arch-dependent Makefile.depend files.
The "local dependencies" were also problematic for bootstrapping.
Sponsored by: EMC / Isilon Storage Division
FAST_DEPEND is intended to be the "skip 'make depend' and mkdep"
feature. Since DIRDEPS_BUILD does this already with some of its own
hacks, and filemon doesn't need this, and nofilemon does, teach it how
to handle each of these cases.
In meta+filemon mode filemon will handle dependencies itself via the
meta mode logic in bmake. We still want to set MK_FAST_DEPEND=yes to
enable some logic that indicates that 'make depend' is skipped in the
traditional sense. The actual .depend.* files will be skipped.
When nofilemon is set though we still need to track and generate dependencies.
Sponsored by: EMC / Isilon Storage Division
The .depend file will still be generated if _EXTRADEPEND is used. The target
is kept with a dependency on DPSRCS though so that 'make depend' will generate
all files.
Sponsored by: EMC / Isilon Storage Division
Rather than depend on .depend not existing, check the actual
.depend.OBJ file that will be used for that object. If it doesn't
exist then use the guessed dependencies.
FAST_DEPEND may never have a .depend file. Not having one means all of the
previous logic would over-depend all object files on all headers which is not
what we wanted. It also means that if a .depend is generated before a build
is done for _EXTRADEPEND (such as for PROG or LIB) then all of these
dependencies would not be used since the .depend wasn't generated from mkdep
and the real .depend.* files are not generated until the build.
Sponsored by: EMC / Isilon Storage Division
The 'cleanilinks' target is kept since it may still be useful as added in
r200178, though never documented.
Sponsored by: EMC / Isilon Storage Division
While making CloudABI work well on Linux, I discovered that I had a
FreeBSD-ism in one of my unit tests. The test did the following:
- Create UNIX socket 1, bind it, make it listen.
- Create UNIX socket 2, connect it to UNIX socket 1.
- Close UNIX socket 1.
- Obtain SO_ERROR from socket 2.
On FreeBSD this returns ECONNABORTED, while on Linux it returns
ECONNRESET. I dug through some of the relevant specifications[1] and it
looks like Linux is all right here. ECONNABORTED should only be returned
when the local connection (socket 2) is aborted; not the peer (socket 1).
It is of course slightly misleading: the function in which we set this
error is called uipc_abort(), but keep in mind that we're aborting the
peer, thus resetting the local socket.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/connect.html
Reviewed by: cem
Sponsored by: Nuxi, the Netherlands
Differential Revision: https://reviews.freebsd.org/D5419
Tested on Spike simulator with 2 and 16 cores (tlb enabled),
so set MAXCPU to 16 at this time.
This uses FDT data to get information about CPUs
(code based on arm64 mp_machdep).
Invalidate entire TLB cache as it is the only way yet.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
the virtvnodes calculation. Include the size of fs-specific v_data as
the nfs nclnode inline, the NFS nclnode is bigger than either ZFS
znode or UFS inode. Include the size of namecache_ts and short cache
path element, multiplied by the name cache population factor, again
inline.
Inline defines are used to avoid pollution of the vnode.h with the
subsystem-private objects. Non-significant unsynchronized changes of
the definitions are fine, we do not care about that precision, and
e.g. ZFS consumes much malloced memory per vnode for reasons
unaccounted in the formula.
Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10.
The measures reduce vnode cache pressure on kmem and bring the vnode
cache memory use below some apparent thresholds that were exceeded by
r291244 due to more robust vnode reuse.
Reported and tested by: marius (i386, previous version)
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
