r336019 introduced ${SRCTOP}/sys to the include paths in order to pull in a
new sys/{c,}nv.h. This is wrong, because the build tree's ABI isn't
guaranteed to match what's running on the host system.
Fix instead by removing -I${SRCTOP}/sys and installing the libnv headers
with `make -C lib/libnv includes`... this may or may not get re-worked in
the future so that a userland lib isn't installing includes from sys/.
Reported by: bdrewery
SMP systems by extending defined(SMP) to include defined(KLD_MODULE).
This is a regression issue after r335873 .
Discussed with: mmacy@
Sponsored by: Mellanox Technologies
Apply temporary fix to counter until daylight hours.
The fact that the assembly for counter_u64_add relied on the sizeof(struct pcpu) was
the basis for the otherwise arbitrary offset never came up in D15933.
critical_{enter,exit} is now inline so the only real added overhead is the
added (mostly false) conditional branch in exit.
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
r335653 flipped the order in which hints/env files are concatenated to match
the order in which vars are processed by the kernel. This is the other
hammer to drop.
Use nv(9) to de-dupe entries within a single `hint` or `env` file, using the
latest value specified for a key. This leaves some duplicates if a variable
is specified in multiple hint/env files or via `envvar` in a kernel config,
but the reversed order of concatenation (from r335653) makes this a
non-issue as the latest-specified version will be seen first.
This change also silently rewrote hint bits to use the same sanitization
process that ian@ wrote for r335642. To the kernel, hints and env vars are
basically the same thing through early boot, then get merged into the
dynamic environment once kmem becomes available and the dynamic environment
is created. They should be subjected to the same restrictions.
libnv has been added to -legacy for the time being to support the build of
config(8) with the new cnvlist API.
Tested with: universe (11 host & 12 host)
MFC after: 1 month
quatactl(2) mechanism. (Read-only at this point, however.)
In particular, this is to allow rpc.rquotad query quotas
for NFS mounts, allowing users to see their quotas on the
hosts using the datasets.
The changes specifically:
* Add new RPC entry points for querying quotas.
* Changes the library routines to allow non-UFS quotas.
* Changes rquotad to check for quotas on mounted filesystems,
rather than being limited to entries in /etc/fstab
* Lastly, adds a VFS entry-point for ZFS to query quotas.
Note that this makes one unavoidable behavioural change: if quotas
are enabled, then they can be queried, as opposed to the current
method of checking for quotas being specified in fstab. (With
ZFS, if there are user or group quotas, they're used, always.)
Reviewed by: delphij, mav
Approved by: mav
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D15886
r335653 flipped the order in which hints/env files are concatenated to match
the order in which vars are processed by the kernel. This is the other
hammer to drop.
Use nv(9) to de-dupe entries within a single `hint` or `env` file, using the
latest value specified for a key. This leaves some duplicates if a variable
is specified in multiple hint/env files or via `envvar` in a kernel config,
but the reversed order of concatenation (from r335653) makes this a
non-issue as the latest-specified version will be seen first.
This change also silently rewrote hint bits to use the same sanitization
process that ian@ wrote for r335642. To the kernel, hints and env vars are
basically the same thing through early boot, then get merged into the
dynamic environment once kmem becomes available and the dynamic environment
is created. They should be subjected to the same restrictions.
MFC after: 1 month
It is possible that a fictitious unmanaged userspace mapping of
superpage is created on x86, e.g. by pmap_object_init_pt(), with the
physical address outside the vm_page_array[] coverage.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
gcc found that the variabl "code", while being assigned a value, isn't
be used for anything.
Reviewed by: br
Differential Revision: https://reviews.freebsd.org/D16114
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
It looks like the intent was to allow ZSTD support to be
compiled into the kernel with options ZSTDIO. But it doesn't look
like that was ever implemented or I'm missing how to do it.
I did a cursory audit of kernel config files and made a decision to
enable ZSTDIO in riscv GENERIC and mips MALTA configurations. All other
kernel configurations already had this option in their kernel configs
but they didn't do anything useful as the feature was declared as
"standard" prior to this.
Reviewed by: cem allanjude
Differential Revision: https://reviews.freebsd.org/D16007
further changes adding another level of indentation.
Some of the logic got simplified with the break out functions.
There should be no functional changes.
Reviewed by: kib
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15914
On the 4/4 i386, copyout(9) may need to call pmap_extract_and_hold()
on arbitrary userspace mapping. If the mapping is backed by the
non-managed cdev pager or by the sg pager, on dense configs we might
access arbitrary element of vm_page_array[], in particular, not
corresponding to a page from the memory segment. Initialize such pages
as fictitious with the corresponding physical address.
Reported by: bde
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16085
physical address, which is readily available after sucessfull
vm_page_pa_tryrelock().
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
At the moment, hintmode and envmode are used to indicate whether static
hints or static env have been provided in the kernel config(5) and the
static versions are mutually exclusive with loader(8)-provided environment.
hintmode *can* be reconfigured later to pull from the dynamic environment,
thus taking advantage of the loader(8) or post-kmem environment setting.
This changeset fixes both problems at once to move us from a semi-confusing
state to a consistent state: if an environment file, hints file, or
loader(8) environment are provided, we use them in a well-known order of
precedence:
- loader(8) environment
- static environment
- static hints file
Once the dynamic environment is setup this becomes a moot point. The
loader(8) and static environments are merged (respecting the above order of
precedence), and the static hints are merged in on an as-needed basis after
the dynamic environment has been setup.
Hints lookup are changed to respect all of the above. Before the dynamic
environment is setup, lookups use the above-mentioned order and fallback to
the next environment if a matching hint is not found. Once the dynamic
environment is setup, that is used on its own since it captures all of the
above information plus any dynamic kenv settings that came up later in boot.
The following tangentially related changes were made to res_find:
- A hintp cookie is now passed in so that related searches continue using
the chain of environments (or dynamic environment) without relying on
global state
- All three environments will be searched if they actually have valid hints
to use, rather than just choosing the first environment that actually had
a hint and rolling with that only
The hintmode sysctl has been ripped out. static_{env,hints}.disabled are
still honored and will disable their respective environments from being used
for hint lookups and from being merged into the dynamic environment, as
expected.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15953
physical address, which is readily available after sucessfull
vm_page_pa_tryrelock().
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16085
At the moment, hintmode and envmode are used to indicate whether static
hints or static env have been provided in the kernel config(5) and the
static versions are mutually exclusive with loader(8)-provided environment.
hintmode *can* be reconfigured later to pull from the dynamic environment,
thus taking advantage of the loader(8) or post-kmem environment setting.
This changeset fixes both problems at once to move us from a semi-confusing
state to a consistent state: if an environment file, hints file, or
loader(8) environment are provided, we use them in a well-known order of
precedence:
- loader(8) environment
- static environment
- static hints file
Once the dynamic environment is setup this becomes a moot point. The
loader(8) and static environments are merged (respecting the above order of
precedence), and the static hints are merged in on an as-needed basis after
the dynamic environment has been setup.
Hints lookup are changed to respect all of the above. Before the dynamic
environment is setup, lookups use the above-mentioned order and fallback to
the next environment if a matching hint is not found. Once the dynamic
environment is setup, that is used on its own since it captures all of the
above information plus any dynamic kenv settings that came up later in boot.
The following tangentially related changes were made to res_find:
- A hintp cookie is now passed in so that related searches continue using
the chain of environments (or dynamic environment) without relying on
global state
- All three environments will be searched if they actually have valid hints
to use, rather than just choosing the first environment that actually had
a hint and rolling with that only
The hintmode sysctl has been ripped out. static_{env,hints}.disabled are
still honored and will disable their respective environments from being used
for hint lookups and from being merged into the dynamic environment, as
expected.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15953
proc0 and init are setup as a circular dependency.
create_init() calls fork1() which calls do_fork(). There the
newproc (initproc) is setup with a reaper of proc0 who's reaper
points to itself. The newproc (initproc) is then put on its
reaper's (proc0) p_reaplist (initproc is a descendants of proc0
for proc0 to reap). Upon return to create_init(), proc0 is
added to initproc's p_reaplist (which would mean proc0 is a
descendant of init, for init to reap). This creates a
circular dependency which eventually leads to LIST corruptions
when trying to kill init and a proc0.
For the base system we never really hit this case during reboot.
The problem only became visible after adding more virtual process
spaces which could go away cleanly (work existing in an experimental
branch).
Reviewed by: kib
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15924
doing it last. Also, remove the local tracking of whether usb's busdma
memory allocation got done, because it's safe to call the free_all
function even if it wasn't.
detach() to do nothing if attach() succeeded, which is the opposite of
what's needed. Also, move device_delete_children() from the end to the
beginning of detach(), so that children won't be trying to make use of the
hardware we're in the process of shutting down.
PR: 229510
No valid FreeBSD binary ever called them (they would call lchown and
msync directly) and we haven't supported NetBSD binaries in ages.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15814
arrays, as elements 0 and 1 of one array and elements 1 and 2 of the other.
Run the loop 0..1 instead of 1..2 and use named constants to offset into
one of the arrays.
PR: 229508
Replace size_t members with ksize_t (uint64_t) and pointer members
(never used as pointers in userspace, but instead as unique
idenitifiers) with kvaddr_t (uint64_t). This makes the structs
identical between 32-bit and 64-bit ABIs.
On 64-bit bit systems, the ABI is maintained. On 32-bit systems,
this is an ABI breaking change. The ABI of most of these structs
was previously broken in r315662. This also imposes a small API
change on userspace consumers who must handle kernel pointers
becoming virtual addresses.
PR: 228301 (exp-run by antoine)
Reviewed by: jtl, kib, rwatson (various versions)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15386
The initial work on bhyve NVMe device emulation was done by the GSoC student
Shunsuke Mie and was heavily modified in performan, functionality and
guest support by Leon Dang.
bhyve:
-s <n>,nvme,devpath,maxq=#,qsz=#,ioslots=#,sectsz=#,ser=A-Z
accepted devpath:
/dev/blockdev
/path/to/image
ram=size_in_MiB
Tested with guest OS: FreeBSD Head, Linux Fedora fc27, Ubuntu 18.04,
OpenSuse 15.0, Windows Server 2016 Datacenter.
Tested with all accepted device paths: Real nvme, zdev and also with ram.
Tested on: AMD Ryzen Threadripper 1950X 16-Core Processor and
Intel(R) Xeon(R) CPU E5-2609 v2 @ 2.50GHz.
Tests at: https://people.freebsd.org/~araujo/bhyve_nvme/nvme.txt
Submitted by: Shunsuke Mie <sux2mfgj_gmail.com>,
Leon Dang <leon_digitalmsx.com>
Reviewed by: chuck (early version), grehan
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D14022
mapping, then it leaks the unlinked PV entry. This change eliminates that
leak, freeing the PV entry.
Reviewed by: kib, markj
X-MFC with: r335784
Differential Revision: https://reviews.freebsd.org/D16130
returning NULL.
vm_fault_quick_hold_pages() can be legitimately called on userspace
mappings backed by fictitious pages created by unmanaged device and sg
pagers.
Note that other architectures pmap_extract_and_hold() might need
similar fix, but I postponed the examination.
Reported by: bde
Discussed with: alc
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16085
