Add ip4.saddrsel/ip4.nosaddrsel (and equivalent for ip6) to control
whether to use source address selection (default) or the primary
jail address for unbound outgoing connections.
This is intended to be used by people upgrading from single-IP
jails to multi-IP jails but not having to change firewall rules,
application ACLs, ... but to force their connections (unless
otherwise changed) to the primry jail IP they had been used for
years, as well as for people prefering to implement similar policies.
Note that for IPv6, if configured incorrectly, this might lead to
scope violations, which single-IPv6 jails could as well, as by the
design of jails. [1]
Reviewed by: jamie, hrs (ipv6 part)
Pointed out by: hrs [1]
Fix a handful of issues with via agp support.
* Read the pci capability register to identify AGP 3 support
* Add missing smaller aperture sizes for AGP3 chips.
* Fix the aperture size calculation on AGP2 chips.
All sizes between 32M and 256M reported as 256M.
* Add \n to error string.
o Add PCI ID for BCM 5756.
o Don't enable BGE_FLAG_BER_BUG on both 5722 and 5756, and based
on their PCI IDs rather than their chip IDs.
Reported by: several PC-BSD users via kmoore
Reviewed by: yongari, imp, jhb, davidch
Sponsored by: iXsystems, Inc.
Adapt OpenBSD pf's "sloopy" TCP state machine which is useful for Direct
Server Return mode, where not all packets would be visible to the load
balancer or gateway.
This commit should be reverted when we merge future pf versions. The
benefit it would provide is that this version does not break any existing
public interface and thus won't be a problem if we want to MFC it to
earlier FreeBSD releases.
Discussed with: mlaier
Obtained from: OpenBSD
Sponsored by: iXsystems, Inc.
The devices that supported EVFILT_NETDEV kqueue filters were removed in
r195175. Remove all definitions, documentation, and usage.
The change of function signature for vlan_link_state() was not merged to
maintain the ABI.
Add multichannel (4.0, 5.1 and 7.1) playback support.
Stereo stream is no more duplicated to all ports. If you loose sound, check
you are using right connectors. Front speakers connector is usually green,
center/LFE - orange, rear - black, side - gray.
Make default recording source choosing more intelligent.
Change default recording level from 0 to 75.
It should increase chances for things to work just out of the box.
- Fix several off-by-one errors when using MAXCOMLEN. The p_comm[] and
td_name[] arrays are actually MAXCOMLEN + 1 in size and a few places that
created shadow copies of these arrays were just using MAXCOMLEN.
- Prefer using sizeof() of an array type to explicit constants for the
array length in a few places.
- Ensure that all of p_comm[] and td_name[] is always zero'd during
execve() to guard against any possible information leaks. Previously
trailing garbage in p_comm[] could be leaked to userland in ktrace
record headers via td_name[].
Add a facility for associating optional descriptions with active interrupt
handlers. This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
a description with an active interrupt handler setup by BUS_SETUP_INTR.
It has a default method (bus_generic_describe_intr()) which simply passes
the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
an interrupt handler and copy the name passed to intr_event_add_handler()
into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64, i386, and sparc64 by
having the nexus(4) driver supply a custom bus_describe_intr method that
invokes a new intr_describe() MD routine which in turn looks up the
associated interrupt event and invokes intr_event_describe_handler().
If CTAGS is not set or set to something other than "ctags" or "gtags",
"cleandepend" was not removing the .depend file; fixed. [1]
Allow the CTAGS to be set to something other than "gtags" or "ctags",
but assume it supports a ctags(1)-compatible syntax. [2]
PR: 126747 [1], 46676 [2]
- Remove -d option, whois.nic.mil doesn't exist anymore.
- Make whois capable of searching for IPv6 addresses just like it can
do for IPv4 addresses without having to explicetly specify that the
ARIN server should be used to get the initial information.
PR: bin/142507, bin/128725
Submitted by: Dan Mahoney <danm@prime.gushi.org>, "Matt D. Harris" <mdh_lists@yahoo.com>
r201907:
Extra parantheses to keep certain compilers happy.
r202671:
Fix for a cxgb(4) panic. cxgb_ioctl can be called by the IP and IPv6
layers with non-sleepable locks held. Don't (potentially) sleep in
those situations.
r202678:
Complain if freelist queue sizes are significantly less than desired.
Don't free mbuf chains when bge(4) fails to collapse the mbuf
chains. This part of code is to enhance performance so failing the
collapsing should not free TX frames. Otherwise bge(4) will
unnecessarily drop frames which in turn can freeze the network
connection.
Reported by: Igor Sysoev (is <> rambler-co dot ru)
Tested by: Igor Sysoev (is <> rambler-co dot ru)
Add check for fiber mode for BCM5714 PHY. This PHY supports both
copper and fiber interfaces over GMII so an explicit check is
necessary to know whether it was configured for fiber interface.
This change make BCM5715S work.
Tested by: olli
PR: kern/122551
For controllers that has dual mode PHY(copper or fiber) interfaces
over GMII, make sure to enable GMII. With this change brgphy(4) is
used to handle the dual mode PHY. Since we still don't have a sane
way to pass PHY specific information to mii(4) layer special
handling is needed in brgphy(4) to determine which mode of PHY was
configured in parent interface.
This change make BCM5715S work.
Tested by: olli
Obtained from: OpenBSD
PR: kern/122551
Change gcc to assume a default machine architecture of 486 instead of 386
on "i386". Doing it in the compiler is deemed to be less fragile then
attempting to provide a default -march setting via bsd.cpu.mk. FreeBSD
itself has not supported plain 386 CPUs since 5.x.
- Note that if_xname, if_dname, and if_dunit are usually initialized via
if_initname().
- Document if_drv_flags and replace references to IFF_(RUNNING|OACTIVE)
with references to IFF_DRV_(RUNNING|OACTIVE).
- Complete truncated sentence in the description of if_transmit by copying
from the description in if_qflush.
- Add missing line breaks for translators.
Space cleanup for revision 202669 committed separately for easier review.
This commit is purely space changes.
Submitted by: Matt Reimer
Sponsored by: VPOP Technologies, Inc.
Instead of assuming all vdevs are healthy, check the newest vdev label
for each vdev's status. Booting from a degraded vdev should now be
more robust.
Submitted by: Matt Reimer <mattjreimer at gmail.com>
Sponsored by: VPOP Technologies, Inc.
