Commit Graph

1032 Commits

Author SHA1 Message Date
Satoshi Asami
2da6c2f223 Let MASTER_SITE_OVERRIDE be prepended to the MASTER_SITES list instead
of replacing it.  This way you can point it to a site close to you
that carries many distfiles, and still let it go fetch from the
original site if the distfile is not there.

Original idea by: mmead@Glock.COM
1995-07-24 08:02:07 +00:00
Joerg Wunsch
f2fdb2d731 Description:
German reunification was _way_ back.  Fixing anachronism.

Reviewed by:
Submitted by:	kieber@sax.sax.de (Ulf Kieber)
Obtained from:
1995-07-22 22:15:42 +00:00
John Fieber
7f101baa9d Document the new digest forms of the hackers, current, and questions
mailing lists.
Submitted by:	"Jonathan M. Bresler" <jmb@kryten.Atinc.COM>
1995-07-18 21:33:53 +00:00
Justin T. Gibbs
31acd246c0 Allow the specification of the controller bus when wiring down scsi buses.
This is performed by using a line similar to:

controller scbus0 at ahc0 bus 1

to wire scbus0 to the second bus on an adaptec 2742T controller.

Reviewed by: Peter Dufault(dufault@hda.com), Rod Grimes(rgrimes@FreeBSD.org)
1995-07-17 23:38:16 +00:00
John Fieber
fd75b875db Correct some misinformation about using the MS-DOS xcopy command.
Fix some english syntax errors.  (More corrections needed)
Submitted by:	Kristyn Fayette <kristyn@gnu.ai.mit.edu>
1995-07-17 20:24:09 +00:00
Jordan K. Hubbard
bf484e2f19 Simplify the USE_IMAKE stuff considerably.
Suggested by:	asami
1995-07-17 16:20:58 +00:00
John Fieber
f2e8a51a7b Make a note of the minimum RAM requirements for FreeBSD. 1995-07-16 17:06:22 +00:00
Jordan K. Hubbard
90bec1c3cf A regrettable hack to allow a port to say that it doesn't want its Makefiles
made after the xmkmf run.
1995-07-15 14:07:02 +00:00
John Fieber
03f32f4020 Add a cross reference target for "Supported Configurations". 1995-07-14 21:44:31 +00:00
Rodney W. Grimes
d0a25995fc [I cvs admin -o the last one of these you saw, it was commited on
the wrong branch :-(]

Eliminate incorrect double negative logic Bruce has been gripping
about for a year now.  Change = no_way to = true.

Submitted by: bde (sort of, patch by me :-))
1995-07-13 09:15:50 +00:00
Rodney W. Grimes
33d23de425 Remove CCFPU, it is no longer used any place in the source tree.
Submitted by:	Thomas Graichen <graichen@sirius.physik.fu-berlin.de>
1995-07-13 08:43:14 +00:00
Satoshi Asami
eb2e3d5f9b Add new sup targets for the following categories:
benchmarks, emulators, security, sysutils
1995-07-12 23:56:50 +00:00
Gary Palmer
30bf6ffa62 Don't set SHELL by default - if you chpass -s your shell, this
will over-ride it and confuse several applications, including
xterm
1995-07-12 22:42:55 +00:00
John Fieber
afdd6e6485 A variety of small enhancements.
Submitted by:	asami@cs.berkeley.edu (Satoshi Asami)
1995-07-12 15:01:38 +00:00
Jordan K. Hubbard
7c3041774a Documentation changes reflect the new hardware support and change the
appearance version to 2.0.5 (was 2.1).    Nice and tidy.   :-)
Submitted by:	Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-07-11 03:04:20 +00:00
Satoshi Asami
1feb36cd2d Add IS_DEPENDED_TARGET to change the behavior of a port when you want
to do something else than "install".  For example,

make IS_DEPENDED_TARGET=fetch fetch

will fetch the required distfiles including those of the dependencies
without actually building and installing dependencies.

Also document ECHO_MSG.

Requested by:	paul
Reviewed by:	paul, jhs and others
1995-07-11 02:15:35 +00:00
Mark Murray
bc6a510069 Correct typo. kadmin -> kadmind
Submitted by:	rich@lamprey.utmb.edu
1995-07-10 20:14:08 +00:00
John Fieber
5295947e32 Added the contents of CONTRIB.FreeBSD as an appendix. 1995-07-09 21:39:55 +00:00
John Fieber
32e2e7c0cb Change freebsd-users-groups to freebsd-user-groups 1995-07-09 16:36:00 +00:00
Jordan K. Hubbard
e1578a7d62 Adjust the core team roster to reflect current reality. It's the middle
of July now and none of the parties involved have protested since the matter
was raised in June.

Spell Jörg's name with a proper umlaut.
1995-07-08 20:52:52 +00:00
John Fieber
6498e7d632 Document the new freebsd-users-groups mailing list.
Submitted by:	Jonathan M. Bresler  jmb@kryten.atinc.com
1995-07-08 17:26:11 +00:00
John Fieber
799d8c1a69 Numerous changes by Jordan.
Submitted by:	Jordan Hubbard <jkh@freebsd.org>
1995-07-07 22:25:55 +00:00
John Fieber
c654cad5b7 Fix a couple formatting glitches.
Fix a couple cross references.
1995-07-06 14:25:01 +00:00
Jordan K. Hubbard
7bb916c40d Add Joerg Wunsch to the core team roster. Welcome aboard, Joerg! 1995-07-05 04:14:20 +00:00
John Fieber
f0d0a413a4 Add 4.4BSD set, normalize some formatting. 1995-06-30 18:41:09 +00:00
John Fieber
1e30867d53 Start populating the handbook with useful cross reference targets.
All cross reference labels start with name of the file that contains
them.  A label for the top section level is simply the name of the
file (omitting the .sgml).  Other references within the file append a
colon and onother name.  For example, the label on the mailing list
section in the file eresources.sgml is eresources:mail.  This gives
each file its own cross reference namespace.
1995-06-30 17:37:53 +00:00
Gary Clark II
a5da5e632f Update FAQ to something a little more modern. I still need updated
info on the Non-US DES sites and how-to.

Please look this over and see if you catch any other errors.
Thanks.
1995-06-29 14:05:41 +00:00
Rodney W. Grimes
168b2626e6 Here is a supfile for getting the -stable bits from SUP.FreeBSD.ORG. 1995-06-26 11:41:25 +00:00
Satoshi Asami
77370fd9ed Use
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/

as our distribution point for distfiles and patches.  Other than
cosmetic changes (freebsd.cdrom.com -> ftp.freebsd.org), the
omission of "ports" is important.  I would like to move this
directory completely out of the ports tree (on the ftp site),
so that people who do "get ports.tar.gz" won't get a bogus distfiles
-> ../distfiles symlink (which will make "make fetch" fail).

Sometime around the 2.1 release, the distfiles link will be deleted.
1995-06-26 07:06:59 +00:00
Satoshi Asami
b9e48987a7 Use full pathnames for the commands. Everything except gmake and
xmkmf (i.e., everything in the base distribution) should be referred
to by full pathnames.

Suggested by:	rgrimes, originally from one of his customers
1995-06-26 07:01:20 +00:00
Bruce Evans
278e874772 Remove bogus references to /usr/ucb. 1995-06-26 06:40:23 +00:00
Bruce Evans
5d2fb2731f Document new config flag for lost output interrupts.
Treat the intitial state device less negatively.  It is essential for
initializing nonstandard flags such as crtscts.

Delete anachronisms.
1995-06-26 06:05:30 +00:00
Torsten Blum
25f85f5172 - change contact address for nic.funet.fi to count@nic.funet.fi
- add nic.funet.fi to the eBones/secure mirror list

Submitted by:	Bror Heinola <count@nic.funet.fi>
1995-06-26 02:24:02 +00:00
Satoshi Asami
e8d35b806f Check if uid is 0 before running mtree. If you aren't root, you just
get a message (instead of a bunch of crap from mtree).
1995-06-26 00:30:48 +00:00
Joerg Wunsch
749adad7a6 The joystick driver appeared in FreeBSD 2.0.5, not in 2.1.
Closes PR #docs/559

Submitted by:	jkh
1995-06-25 13:58:54 +00:00
Satoshi Asami
14e07b2241 Add new option NO_MTREE. If set, bsd.port.mk won't run mtree to
set permissions and ownerships of PREFIX (usually /usr/local).  This
is the default if USE_IMAKE or USE_X11 is set.

This should be useful for machines like thud, where we want to keep
the /usr/local subtree writable to a group ("ports" in our case).  Anybody
who installs stuff in /usr/local should have this set in the environment.

Note this won't affect anything the pkg_* suite does.
1995-06-25 06:30:51 +00:00
Satoshi Asami
e26bc1e6cc Add a "checkpatch" target that does a "patch -C" instead of a "patch".
Note that the two "touch"s I took out from do-patch shouldn't have
been there in the first place.

This target may give incorrent results if two separate patches deal
with the same file, and their hunks overlap.  (But having those kinds
of patches are bad, and they should be merged anyway.)

Reviewed by:	hsu
1995-06-24 10:27:23 +00:00
John Fieber
689a773d32 Correct some incorrect instructions.
Submitted by:	Mattias.Gronlund@sa.erisoft.se (Mattias Gronlund)
1995-06-23 13:59:37 +00:00
John Fieber
62172c8210 Fix an assortment of typos.
Submitted by:	Philippe Charnier <charnier@lirmm.fr>
1995-06-22 13:47:09 +00:00
John Fieber
43f8595f73 Fix braino induced typo. (Okay class, its time for spelling!)
Submitted by:	wollman@lcs.mit.edu
1995-06-20 16:51:38 +00:00
John Fieber
c469fa9c70 Fix a stupid typo, rearrange the url for the usenet archive. 1995-06-20 16:42:48 +00:00
John Fieber
87b64aa499 Fixed a blatant lie regarding newsgroups. Added pointers to indexed
arcihves of the mailing lists and usenet groups.

Renamed the last part "Appendicies"

Moved "PC hardware reference" to the Appendicies section and added
an introduction.

Fixed a dangling cross reference.  (submitters.sgml)
1995-06-20 16:29:55 +00:00
Satoshi Asami
037b03ba12 Add jp.106.kbd and jp.106x.kbd to list of KEYMAPS so that they will
get installed.

Submitted by:	Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
1995-06-19 08:21:24 +00:00
Andrey A. Chernov
ebd70bcd2c Upgrade multiport cards list 1995-06-18 13:34:32 +00:00
Joerg Wunsch
60562de998 Mention Chuck Robey for his contribution of a floppy tape streamer
for experimental work.
1995-06-14 22:17:57 +00:00
John Fieber
017b6c4995 New sections added: release notes, installation, kernel debugging.
Numerous other edits.  Empty sections now have an * in the section header.
1995-06-14 18:38:56 +00:00
David Greenman
afbc52c4dc Added ftp.ctr.vt.edu.
Submitted by:	Mathew Mead
1995-06-14 17:09:23 +00:00
Rodney W. Grimes
d3628763db Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00
Jordan K. Hubbard
8c6326f5db Add John Lind's instructions on dealing with ESDI/MFM drives.
Submitted by:	John Lind <john@starfire.MN.ORG>
1995-06-08 09:08:38 +00:00
Satoshi Asami
0fbb5009b2 Renamed the default package repository ".../packages/.packages" to
".../packages/All".  The "all" category that was automatically added
for every package is gone.

Note that bsd.port.mk requires category names to start with lowercase
names, otherwise it may get confused.

Reviewed by:	jkh

By the way, here is a small script to convert your local package
hierarchy.  Run it in bash, as /bin/sh not only will bark at the
$(.) command substitution but will also botch the [a-z]*/*.tgz
expansion (long-standing and annoying bug, reported before).

cd /usr/ports/packages
mv .packages All
for i in [a-z]*/*.tgz; do
  j=$(basename $i)
  /bin/rm $i
  ln -s ../All/$j $i
done
1995-06-06 10:56:34 +00:00
Rodney W. Grimes
44204187ec Remove trailing whitespace. 1995-05-30 06:58:14 +00:00
Satoshi Asami
7ee5520fc3 Remove comment about not being able to undefine a variable, as we *can*
do that.
1995-05-29 13:46:38 +00:00
Jordan K. Hubbard
310738c869 Fix 2 spelling bogons. 1995-05-29 05:19:15 +00:00
Jordan K. Hubbard
d490f49f9f Add some last attributions and clean up some of the recent additions. 1995-05-28 19:49:57 +00:00
Poul-Henning Kamp
78420108a3 Added name cache optimization, Ontrack, bad144, 3c505, and removed pas.c 1995-05-28 18:56:01 +00:00
Justin T. Gibbs
f5e2ec3211 Add a missing "supports" to a sentence.
Add Bt956 as being supported.
Include 2940 in the 2742/2842 section.

Anyone with a new feature or driver in 2.0.5 should think about adding "blurbs"
to this file.  Some features say exactly what they do, others say nothing...
this document needs some rounding out.
1995-05-28 18:32:01 +00:00
Jordan K. Hubbard
903d1c40e3 Nuke out all the TAB characters so that this stuff looks right in
a dialog text box.
1995-05-28 09:10:44 +00:00
Jordan K. Hubbard
8ee1922656 My changes to these files.. Update things for 2.0.5. 1995-05-28 09:08:53 +00:00
Jordan K. Hubbard
316000987c Eliminate dups in CONTRIB.FreeBSD.
Numerous changes to RELNOTES.
Submitted by:	Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-05-28 02:48:07 +00:00
Ollivier Robert
9b9ccd1307 The securedist outside the USA have changed a great deal.
The site in Island has only the 1.1-RELEASE dist.
The previous South Africa sites are dead and the brasilian one
is very hard to get into and painfully slow.
The two South Africa sites come from MIRROR.SITES.
1995-05-25 19:05:01 +00:00
Rodney W. Grimes
424e4f7c42 Add the link for apm.4 so you can find the man page. 1995-05-22 20:49:25 +00:00
Jordan K. Hubbard
3492f770db Add Frank Durda IV <bsdmail@nemesis.lonestar.org> 1995-05-20 07:02:22 +00:00
Jordan K. Hubbard
deb139317a 1. Move Nate from Core Team to Contributors, as per his instructions.
2. Adjust some of my previous wording to be more indicative of the way things
   currently are and using less bogus corporate categorizations ("Directors"
   and "Officers" only exist in real corporations, which the FreeBSD Project
   is not, so it sounded kind of pompus on reflection).
1995-05-19 13:52:01 +00:00
John Fieber
84143d2611 handbook.sgml
Rearranged a few sections, add memoryuse section.

current.sgml, ports.sgml, porting.sgml
  Added a <label>s for cross reference targes.

submitters.sgml
  Lots of editing, added cross references to other sections of
  the handbook.  Added a sample BSD-style copyright statement.

eresources.sgml
  Updated the mailing list section, thanks to Peter Dufault.

authors.sgml
  Added Peter Dufault, David Greenman and Joerg Wunsch.

memoryuse.sgml
  A new section about how/where in PC memory the FreeBSD kernel
  gets loaded and run.
1995-05-18 03:05:22 +00:00
Torsten Blum
384435b07d Added myself as per Rod's suggestion 1995-05-17 20:45:10 +00:00
Lars Fredriksen
38dccde2c3 Added myself as per Rod's suggestion. 1995-05-17 17:04:36 +00:00
Adam David
2a8fad2596 added myself as additional contributor 1995-05-17 09:53:03 +00:00
Ollivier Robert
3fdda4bd2c Change the "make all" into "make depend all" in 6.0.6 (section on kernel
building).

Submitted by:	Rodney Grimes
1995-05-17 09:18:45 +00:00
Rodney W. Grimes
c30f3572fa Add Peter Dufault <dufault@hda.com> 1995-05-17 02:01:00 +00:00
Satoshi Asami
1eb4157a2e Capitalize mail address of TokyoNet mirror per their request. 1995-05-17 01:55:26 +00:00
Satoshi Asami
5bbce04d77 Added new primary mirror site in Tokyo (direct connection to
BARRNET!).
1995-05-17 01:48:50 +00:00
Andrey A. Chernov
77f033ad20 Enable vt100 semigraphics for xterm 1995-05-16 18:13:01 +00:00
Satoshi Asami
d5531570b4 Fix the indent level. I know we're in code freeze, and this is
one of the key components of the system, but I'm sure that this:
===
-               ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
+               ${ECHO_MSG} "===>  Registering installation for ${PKGNAME}"; \
===
change has absolutely no chance to screw us up, right? :)
1995-05-16 10:31:25 +00:00
John Fieber
b2821ccba5 Slip server document updated for 2.x systems.
Submitted by:	Guy Helmer <ghelmer@alpha.dsu.edu>
1995-05-15 22:07:21 +00:00
Andrey A. Chernov
f101e3f500 Fix xterm entry by fallback to vt220 entry,
also compact VT* is/rs capabilities to prevent overflowing
1995-05-14 23:32:53 +00:00
Satoshi Asami
563120df88 Don't conditionalize fake-pkg on NO_PACKAGE. 1995-05-13 23:37:16 +00:00
Satoshi Asami
2914e4f239 Add FORCE_PACKAGE, if this is defined, NO_PACKAGE will be turned off.
Ports for which we can't build packages should define NO_PACKAGE but
still prepare pkg/* files.  The user who really wants a package and
clear of the legal problems can say FORCE_PACKAGE from the command line
to build a package anyway.
1995-05-13 05:37:45 +00:00
Andrey A. Chernov
b94c770a5e Add Moscow and Kiev 1995-05-12 20:13:19 +00:00
Satoshi Asami
9f3f196b2c When NO_PACKAGE is set, "package" and "repackage" don't depend on
"install".  In other words, they won't do anything at all.
1995-05-12 08:44:12 +00:00
Satoshi Asami
a11b461203 Not only deleting the package and package links, also exit with status
1 if pkg_create returns error!
1995-05-12 07:43:48 +00:00
Satoshi Asami
25254cc62d Delete package and links when pkg_create fails. 1995-05-12 07:32:59 +00:00
John Fieber
3fc924e8ce Update the kerberos section, add Mark Murray <mark@grondar.za> to
the authors section.
Submitted by:	Mark Murray <mark@grondar.za>
1995-05-11 22:31:28 +00:00
John Fieber
d4053fae6e Added "FreeBSD in a nutshell", swiped from the WWW pages with a
few modifications.
1995-05-11 02:03:38 +00:00
John Fieber
63fa13d623 Added Jordan's "brief history of FreeBSD", swiped from the WWW pages. 1995-05-10 22:12:01 +00:00
John Fieber
db27b2e18e Toplevel reorganization and integration of Poul-Henning Kamp's section
on the booting process.
1995-05-10 11:34:07 +00:00
Satoshi Asami
827039417c Add new variable to override the "hey foobar-1.2.3 is already installed"
warning from fake-pkg.
# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
#                      registration information in ${PKG_DBDIR}/${PKGNAME}.
1995-05-10 09:30:09 +00:00
Satoshi Asami
9432f44382 New directory name for uec mirror.
Submitted by:	hideaki@strauss.ee.uec.ac.jp (Hideaki Tsuchiya)
1995-05-10 04:18:24 +00:00
John Fieber
53a4c0de25 Add sgml 1995-05-10 00:36:16 +00:00
John Fieber
4213d0cd98 Update the doctype declaration to use the FreeBSD version of the
linuxdoc DTD.
1995-05-10 00:12:18 +00:00
John Fieber
39fe917d33 The linuxdoc DTD used for the FreeBSD handbook and FAQ.
Reviewed by:	rgrimes
Obtained from:	Linux (with modification)
1995-05-09 23:19:47 +00:00
Rodney W. Grimes
0f9b873be7 Change install: to afterinstall: to be more consistent. 1995-05-09 10:12:16 +00:00
Satoshi Asami
94c600b239 Make the "reinstall" target delete the package cookie as well as
the install cookie.
1995-05-09 00:31:54 +00:00
Bruce Evans
fd2e43ead6 Submitted by: charnier@lirmm.fr (Philippe Charnier)
Fix comment on .else to match code.
1995-05-07 06:39:30 +00:00
Satoshi Asami
3339f3175b Change of hostname and contact address for TUT's mirror site. Is this
list automatically pulled into the install docs?
Submitted by:	Ashida Hiroyuki <ashida@ftp.tut.ac.jp>
1995-05-06 09:10:49 +00:00
Peter Dufault
314a2585d5 New modes file needed for mode editor. "b" can not stand for bit fields. 1995-05-05 20:43:46 +00:00
Adam David
0b3de6080b added support for distribution patches in a subdir of ${DISTFILES} 1995-05-04 18:53:26 +00:00
Jordan K. Hubbard
5b54701701 Add Israel to list of mirrors. Is there an SGML version of this planned?
Submitted by: Serge S. Maleyev <serg@klara.weizmann.ac.il>
1995-05-04 15:32:25 +00:00
Jordan K. Hubbard
628bb93361 Put an `@' in front of the mtree command. I don't want to see it. 1995-05-04 13:14:16 +00:00
Andrey A. Chernov
275a19fedc ports-russian added 1995-05-03 14:59:56 +00:00
Andrey A. Chernov
d62eae9c12 ports-russian added 1995-05-03 14:32:27 +00:00
Jordan K. Hubbard
d6d644f14f Add an mtree line to the install target. 1995-05-02 13:49:01 +00:00
Satoshi Asami
f1d04c8507 A popular variation of the 106-key keymap -- this one has control
and caps-lock swapped.
Submitted by:	Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
1995-05-02 07:11:46 +00:00
Peter Dufault
650afa65f9 Add scsi_modes 1995-05-01 17:09:49 +00:00
Satoshi Asami
8e7c35dd1a A bunch of new targets in the package area. Relevent targets are:
package:           check installation, build package, create links,
                   touch cookie
repackage:         ditto but don't check cookie
package-noinstall: just build package from installed stuff, no cookies
                   involved at all
package-links      create the symbolic links only
delete-package:    delete package and symbolic links
delete-package-links: delete links only

These should make the management of the spaghetti of package links
a little friendlier. :)
1995-04-30 12:28:43 +00:00
Gary Palmer
c709d38b60 Add missing ports-japanese target.
Alter sup host to be SUP.FreeBSD.ORG to allow for future work.
1995-04-29 01:03:10 +00:00
John Fieber
f9e11b2a03 Move out of the obsolete FAQ directory into the handbook. 1995-04-28 19:48:56 +00:00
Peter Dufault
72c59e2da5 Symoblic representation of mode pages 1995-04-28 19:25:17 +00:00
John Fieber
0a1195e737 The FAQ moves to its new home. 1995-04-28 16:36:02 +00:00
John Fieber
dd8fd5aac1 The FreeBSD handbook finds a new home. 1995-04-28 16:19:59 +00:00
Jordan K. Hubbard
6db578a60b Pass X11BASE to all sub-makes. I need it for a port, and I daresay that
there are a lot of hardwired "/usr/X11R6" paths out there that could stand
to use it as well.
1995-04-28 15:40:37 +00:00
Peter Dufault
a93d103fb4 Change to reflect new header file name. 1995-04-28 12:28:55 +00:00
Satoshi Asami
2966c8b3da Japanese 106-keyboard.
Submitted by:	Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
1995-04-28 06:03:18 +00:00
Peter Dufault
657e73c4f5 Add National Instruments "LabPC" driver 1995-04-28 00:51:40 +00:00
Torsten Blum
e347ee4837 Add ftp.uni-paderborn.de 1995-04-26 14:56:57 +00:00
Jordan K. Hubbard
6dbad786ae Add LIBFTP. 1995-04-26 14:34:19 +00:00
Garrett Wollman
08af2cee88 Fix some conflicting descriptions. 1995-04-25 17:08:16 +00:00
Jordan K. Hubbard
6940898b50 Document matcd1.
Be more explanatory about port selection.
Document that new TEAC drives don't work.
Submitted by:	Frank Durda IV <uhclem@nemesis.lonestar.org>
1995-04-25 10:23:53 +00:00
Garrett Wollman
71fbc5ca54 Add more comments for tzsetup and fix some old ones. 1995-04-24 21:03:40 +00:00
Satoshi Asami
570e661f02 (1) Add the chain of dependencies to the targets in the NO_* section
too (otherwise the chain won't work).
(2) If NO_WRKDIR is set, "make clean" removes "./.*_done" (assuming
    these are cookies...or should I list all the cookies?)
1995-04-24 10:41:51 +00:00
Satoshi Asami
c046aaad20 Move call of fake-pkg from do-install to end of install. 1995-04-24 09:05:34 +00:00
Garrett Wollman
3bf7d64959 Added parseable comments describing the zone each entry represents. 1995-04-23 21:24:54 +00:00
Garrett Wollman
c040025a4b Add `fe' Ethernet driver man page. 1995-04-23 18:54:40 +00:00
Jordan K. Hubbard
a746536c51 Document COPTFLAGS in addition to CFLAGS. 1995-04-23 13:03:24 +00:00
Jordan K. Hubbard
ffa6d17f61 Ok, this should get the last of the stragglers installed into a new fake-pkg. 1995-04-22 01:22:49 +00:00
Jordan K. Hubbard
ca22b5aa87 Don't try to run the fake-pkg target if NO_PACKAGE is set. 1995-04-22 00:08:06 +00:00
Jordan K. Hubbard
405b7c80bd Typo: patch -> package 1995-04-22 00:05:46 +00:00
Jordan K. Hubbard
b79219d31a Instead of copying PLIST over, run pkg_create in a special mode that dumps
the fully-formed PLIST to stdout and uses that.
1995-04-22 00:01:26 +00:00
Satoshi Asami
60ee8ee7cb Major overhaul. The major targets (fetch, extract, patch, configure,
build, install) are now all skeletons and do nothing but

(1) Call pre-* target (if exists)
(2) Call scripts/pre-* script (if exists)
(3) Call do-* target
(4) Call post-* target (if exists)
(5) Call scripts/post-* script (if exists)

The do-* targets do all the work.  The pre-* and post-* targets/scripts
don't exist by default.  The main targets check for the cookies too, so
porters shouldn't have to worry about them at all.

NOTE: THE MAIN TARGETS IN THE PORTS MAKEFILES SHOULD GO AWAY.  We need
to fix this before wcarchive comes back up.  Change the names to do-*,
rip out the cookies, rip out the calls to pre-* etc. and most of them
should work.

Also, reorganize the whole thing so that similar targets are together
and add more comments.  Surround section header with 64 #'s (C-u C-u
C-u # in emacs :).

Hopefully this will be the last major change to bsd.port.mk.  Now let
the Makefile-hacking begin.
1995-04-20 18:03:02 +00:00
Jordan K. Hubbard
0892118cdf 1. Add Satoshi's much-requested "fake pkg_add" option to the installation
rule.

2. Have all non-X11 prefix using packages include the BSD.local.dist mtree
   file for initialization of /usr/local.  I'm still not sure if this is
   A Good Thing(tm) but I'll see what the users say.  It's easily overridden.

3. Standardise on ${PKG_DBDIR} as pointer to /var/db/pkg or local preference.
1995-04-19 15:02:26 +00:00
Satoshi Asami
f744a9768e Use PKGNAME in the "describe" target (used to generate INDEX) too.
Didn't make sense to have two ports with the same name.
1995-04-18 08:24:18 +00:00
Satoshi Asami
60f1eb26c1 Use PKGNAME instead of DISTNAME in messages. To avoid things like
"Building for WWW" (pops up in two different ports) "Installing for
web2c-6.1" (ditto), which aren even't reminiscent of the port's real
name.

Sorry jmz, please don't go fix the print Makefiles' own messages.
We are going to take them out after we do the great bsd.port.mk
update anyway.
1995-04-18 08:18:27 +00:00
Satoshi Asami
824cc0cc5d "package" now depends on "install", so we can do "make -k package" from
the top level and have the build-package sequence of each port work
together.

For the old behavior (i.e, just go ahead and blindly pack everything up,
regardless of the contents of work/), there is a new target "repackage".
1995-04-17 06:39:05 +00:00
Satoshi Asami
19eddad0a8 "all" now depends on "build", not "extract configure build".
Since "build" depends on "configure", which depends on "patch", etc.,
this shouldn't disrupt any Makefile that doesn't break the dependency
chain.

The old behavior was very annoying because when I did a "make -k",
it would still try to go configure and build even if the extraction
failed.
1995-04-17 06:28:15 +00:00
Joerg Wunsch
28cd12e87e Put David's and my answer regarding loader and kernel memory usage
here.
1995-04-16 13:04:21 +00:00
Andreas Schulz
9702179904 Update the link.5 man page to reflect the changes in ld/rtld/link.h. 1995-04-16 12:35:13 +00:00
Justin T. Gibbs
c4bec2ef93 Install ahc.4. 1995-04-16 00:08:53 +00:00
Satoshi Asami
825402c2ab Yikes...typo (.package/ should have been .packages/). 1995-04-15 23:56:29 +00:00
Justin T. Gibbs
e68becc836 To celibrate the new status of the ahc driver, give it a man page.
Add references to the ahc driver to the other adaptec man pages.

Remove the "NOTE" section of the ahb man page that complained about
Adaptec's NDA policy preventing 274x driver development.
1995-04-15 21:48:31 +00:00
Andrey A. Chernov
8b2ceaa471 Add separate entry for screen(1), slightly different from vt220 1995-04-14 15:57:49 +00:00
Andrey A. Chernov
e6325d4843 vt220: fix k1-k4 to be more compatible with xterm
and other emulators.
Simplify se/ue for emulators
1995-04-14 15:38:46 +00:00
Jordan K. Hubbard
dcaaf7cf51 Get the matcd manpage linked into the parent directory like the others. 1995-04-13 20:44:51 +00:00
Jordan K. Hubbard
b9ebe70c00 Add Steve Gerakines <steve2@genesis.tiac.net> to contributors. 1995-04-12 22:47:31 +00:00
Bill Paul
e868bdd2a0 Add ethers(5) man page. 1995-04-12 22:16:08 +00:00
Martin Renters
a9f9caeabd Add myself to the Contrib list. 1995-04-11 03:14:50 +00:00
Jordan K. Hubbard
9e87dd6ab1 Don't pass duplicate pkgdeps to pkg_create 1995-04-10 08:09:21 +00:00
Jordan K. Hubbard
b81be3d3e8 Add matcd.4 to list of manpages. 1995-04-09 15:55:21 +00:00
Jordan K. Hubbard
83376d5b95 A new man page for the matcd driver.
Submitted by:   Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-04-09 15:49:46 +00:00
Jordan K. Hubbard
a8f0877be0 Add new -P argument to pkg_create. 1995-04-09 15:00:56 +00:00
Jordan K. Hubbard
489c51e631 Add 2 new targets to facilitate some things I'm thinking about.
1.  package-name
	Simply echos the associated package name for a port (if any).
2.  package-depends
	Shows all package names on which this port depends.
1995-04-09 12:27:58 +00:00
Jordan K. Hubbard
c4fb365962 1. Fix the first line (should be a proper comment - silly emacs).
2. KEYWORDS+= CATEGORIES
3. CATEGORIES+= all (always want to be in "all"!)
1995-04-09 10:24:09 +00:00
Satoshi Asami
3d0c66c99a Add support for categorized subdirectories for packages. By default,
all .tgz files go to /usr/ports/packages/.packages, and a relative
symlink is created for every item in CATEGORIES...i.e., if "CATEGORIES
= foo bar", then /usr/ports/packages/{foo,bar}/pkgname.tgz both point
to /usr/ports/packages/.packages/pkgname.tgz.

Suggested by:	jkh
1995-04-09 09:59:42 +00:00
Jordan K. Hubbard
5a12a69a54 Document that flags 0x1 is required on fdc0 line to make ft0 work.
Also please note that previous commit regarding UH24F controller was
misattributed to Poul - it was Steve's!
Submitted by:	Steve Gerakines <steve2@genesis.tiac.net>
1995-04-09 07:02:03 +00:00
Jordan K. Hubbard
881c5753b5 Could you please update the list of drives supported. It currently
lists:

        UH-14f Series <ISA>
        UH-34f Series <EISA/VLB>

Should read:

        UH-14f Series <ISA>
        UH-24f Series <EISA>
        UH-34f Series <VLB>

Submitted by:	phk
1995-04-09 06:59:42 +00:00
Joerg Wunsch
d95f5d1983 pcvt is proud enough to have a man page. :) 1995-04-08 20:08:42 +00:00
Joerg Wunsch
785b47579d Upgrade pcvt to 3.20 b24. 1995-04-08 16:04:22 +00:00
Poul-Henning Kamp
1e85d7f664 Added Dean Huxley <dean@fsa.ca>. 1995-04-08 09:40:18 +00:00
John Fieber
f9fc2cff0c Fixed a big typo pointed out by phk. 1995-04-07 16:45:35 +00:00
Satoshi Asami
b43cac1cdd Added Nobuhiro Yasutomi and Akito Fujita, deleted me (Satoshi, not
Michael :) from "Additional Contributors" list.
1995-04-06 17:26:14 +00:00
John Fieber
f85e2485b8 The skeletal framework for the FreeBSD help system. Point a WWW
browser at index.html to see how it works.  Ultimately what currently
lives in the tutorials section will become the User and Admin manual
sections.
1995-04-06 15:56:10 +00:00
Jordan K. Hubbard
3df0a1ed3f Add Satoshi Asami. 1995-04-05 10:22:58 +00:00
Jordan K. Hubbard
7ab533048d Update information on newsgroups. 1995-04-05 10:04:56 +00:00
Jordan K. Hubbard
55f61a13e3 Latest language support changes from Wolfram.
Submitted by:   Wolfram Schneider <wosch@cs.tu-berlin.de>
1995-04-05 08:02:52 +00:00
Jordan K. Hubbard
761b249a88 Latest language support changes from Wolfram.
Submitted by:	Wolfram Schneider <wosch@cs.tu-berlin.de>
1995-04-05 08:02:24 +00:00
Jordan K. Hubbard
d5b3cf8435 options LKM is now the default. No need to reference option that's
already turned on (and isn't in LINT).
1995-04-05 01:06:00 +00:00
Jordan K. Hubbard
30854325fe Add USE_X11 for ports which are X11 users but don't use IMAKE. 1995-04-04 05:57:19 +00:00
Gary Palmer
9a8496fd7b Remove a `.' from the end of the echo line
`>> Attempting to fetch from $${site}' as it is misleading
1995-04-04 04:23:37 +00:00
Jordan K. Hubbard
a6ae8257a8 By default, KEYWORDS is a copy of CATEGORIES. 1995-04-01 10:01:49 +00:00
Jordan K. Hubbard
c9cf4a47d8 Add default values and document them for CATEGORIES and KEYWORDS. 1995-04-01 09:35:29 +00:00
Jordan K. Hubbard
2cc9ea7aee Add support for new CATEGORIES and KEYWORDS fields. 1995-04-01 09:34:11 +00:00
Andrey A. Chernov
5c95f7a6dc Add Delete key description
Fix Right window/Left window/Menu keys numbers
1995-03-30 00:22:29 +00:00
Andrey A. Chernov
3bea04e934 Remove syscons example 1995-03-30 00:05:58 +00:00
Nate Williams
a01bd386af Do what should have been done in v1.14
*Really* strip out unused local symbols from shared objects.

This was a typo on my part caused by an assumption that the profiled
libraries stripped symbols that same way as the non-profiled libraries.

Cut-n-Paste strikes again.

Obtained from: NetBSD
1995-03-28 17:54:11 +00:00
Andrey A. Chernov
81855a2ac4 Update cons25 to S0ren ^H back changes 1995-03-28 05:43:58 +00:00
Satoshi Asami
df32d0cc55 Add support for "distributed" patches and a little extra cleanup.
New variables:

PATCH_SITES:	patch equivalent of MASTER_SITES, overridable with
.		MASTER_SITE_OVERRIDE.
PATCHFILES:	Additional files to fetch and give to patch before
.		applying the ones in patches/patch-*.  If name ends
.		with ".gz" or ".Z", it will be piped through zcat first.

Plus PATCH_DIST_STRIP and PATCH_DIST_ARGS that serve the same functions
as PATCH_STRIP and PATCH_ARGS for patches in patches/patch-*.

In the documentation and echo messages, I used the term "distributed
patches" and "FreeBSD patches" to refer to ${PATCHFILES} and patches/patch-*.
If you can come up with better names, by all means go ahead and fix them.

"grep PATCH /usr/ports/*/*/Makefile" reveals seven ports (mule, jless,
jtcl, jtk, dgd, less, color_xterm, gee I wonder why I'm the one who
implemented this) that can benefit from this.  I'm now diving headlong
into /usr/ports to fix their Makefiles.
1995-03-28 01:14:29 +00:00
Søren Schmidt
19c66761c7 Give backspace to the people (again)
Now the keymaps are as follows:

"backspace / <-"	^H
"grey del"		^? (0x7f)
"numpad , del"		^? (, if numlocked)
1995-03-27 19:41:11 +00:00
Satoshi Asami
32c4c80bff Added more standard package suport file names. INSTALL for the
installation script, DEINSTALL for the deinstallation script, and
REQ for the requirement script, will be added with appropriate
flags to PKG_ARGS if they exist under pkg/.
1995-03-27 13:11:18 +00:00
Andrey A. Chernov
8e3cede18e Fix duplicate. 1995-03-27 05:08:43 +00:00
Andrey A. Chernov
aca38c3602 pc3r (russian): change kD to old compatible value.
vt100: remove obsoleted nl
1995-03-27 04:55:41 +00:00
Andrey A. Chernov
910e8e7cc1 Set kb=\177 to make proper erase char for DEC VTs 1995-03-27 03:46:05 +00:00
Andrey A. Chernov
4717f90280 Add :ut to vt100 generic entry 1995-03-27 01:36:00 +00:00
Andrey A. Chernov
3952ec9bdb Yet one pass through DEC VT entries 1995-03-27 00:55:51 +00:00
Andrey A. Chernov
2adf028be3 Add eo:it#8 to vt100 entry 1995-03-26 01:30:33 +00:00
Andrey A. Chernov
c6159a7bd8 vt100/102/220 entries affected:
major cleanup
add lot of missing capabilities
1995-03-26 01:02:54 +00:00
Jordan K. Hubbard
3268de551f Add gil.physik.rwth-aachen.de to mirrors 1995-03-25 18:15:12 +00:00
Joerg Wunsch
d92d2e1236 Update the kernel debugging FAQ to match the new (k)gdb and new DDB
symbol behaviour.
1995-03-25 12:35:00 +00:00
Jordan K. Hubbard
0b15614f22 Back out previous patch - better kept as a reminder. 1995-03-24 06:44:55 +00:00
Andrey A. Chernov
c0844b4775 Add yet one popular russian keyboard variant
Submitted by: Serge Babkin <babkin@hq.icb.chel.su>
1995-03-24 05:40:17 +00:00
Jordan K. Hubbard
cf522ac9ff Comment out a table of contents spec that didn't exist. 1995-03-24 04:42:21 +00:00
Jordan K. Hubbard
7bf4ec6f56 Add the font index file. Other languages (French, Swedish, other)
needed for this file!
1995-03-24 01:11:56 +00:00
Jordan K. Hubbard
f6f4d4be87 Add the keymap index file. Other languages (French, Swedish, other)
needed for this file!
1995-03-24 01:11:40 +00:00
Gary Palmer
c534dadbfe Add a misssing `@' from before echo -n "|${MAINTAINER}" 1995-03-23 20:42:42 +00:00
Jordan K. Hubbard
06b0ad8a6f /etc/rc.netstart back to /etc/netstart 1995-03-23 06:05:04 +00:00
Jordan K. Hubbard
4642c87ca4 netstart -> rc.netstart 1995-03-23 01:49:15 +00:00
Jordan K. Hubbard
5abc844b74 Add maintainer to the index line. 1995-03-22 21:46:04 +00:00
Jordan K. Hubbard
2d333dc2dd Add new EXTRACT_BEFORE_FLAGS and EXTRACT_AFTER_FLAGS variables to make
complex extraction rules easier.
1995-03-22 21:28:31 +00:00
Jordan K. Hubbard
2efda52f23 Make the fetch message a little more interesting and informative. 1995-03-21 22:43:36 +00:00
Jordan K. Hubbard
c80053bc55 Do a big re-org of the FAQs along the lines of those discussed awhile back.
It's time to start moving in the directions we've had in mind for awhile.
SGML for everything new and old stuff moved into a location where it can slowly
be aged and removed (basically, Text/).
1995-03-21 20:19:47 +00:00
Jordan K. Hubbard
3dd8895eb8 Add fetch-list command for Rod
Use ECHO_MSG macro for printing "===>" line things so that I can now turn
those OFF when I don't want them.
1995-03-21 03:59:13 +00:00
Poul-Henning Kamp
6950e7e24e make.conf doesn't postulate anything about libm now. 1995-03-21 02:55:33 +00:00
Jordan K. Hubbard
bc202f1b6e Make the describe rule generate more thorough information that's actually
of use to a front-end program.  Back out my bogus description of the `index'
target! :-)
1995-03-21 01:51:12 +00:00
Jordan K. Hubbard
9608972d54 Document the index target. 1995-03-21 01:31:43 +00:00
Andrey A. Chernov
be27572a45 Better spelling of my name 1995-03-21 00:37:07 +00:00
Jordan K. Hubbard
39ad1abd89 Take out obsolete KERBEROS_IV build variable. Just eBones now.
Submitted by:	Mark Murray <mark@grondar.za>
1995-03-20 21:35:15 +00:00
Garrett Wollman
27a15c94ed Add support for pseudo-device LKMs. 1995-03-20 19:18:51 +00:00
Andreas Schulz
261bbea610 Don't do anything if BATCH is specified and the port is interactive for
the package target.The port may is not build and the package fails
otherwise.
1995-03-20 00:41:36 +00:00
Andreas Schulz
0bc6b9462b Change the xmkmf call to a xmkmf -a call. This should be more correct for
all X11R5 and X11R6 ports. This is the way how it should be normally
used according the manuals. Only pre-X1R5 ( X11R4, X11R3) ports can't
handle it.
1995-03-19 12:49:06 +00:00
Bruce Evans
62e2a046b2 Obtained from: 1.1.5 (originally by Andrew Moore)
Add the manpage for the stuff in <machine/floatingpoint.h>.
1995-03-18 16:54:35 +00:00
Poul-Henning Kamp
38b590b187 Fix a spelling error.
Submitted by:	Stephen McKay <syssgm@devetir.qld.gov.au>
1995-03-16 22:03:09 +00:00
Poul-Henning Kamp
b372c217fc Fixed Stephen McKay's email address. 1995-03-16 22:01:57 +00:00
Garrett Wollman
0e5ca0d837 Document net.inet.ip.sourceroute MIB variable. 1995-03-16 18:24:19 +00:00
Poul-Henning Kamp
16ecbe2b7f Added cons30, cons43 and cons60 terminal types (==cons25 with more lines).
Theres a mono entry for them all, and cons50 already existed.
1995-03-16 01:37:41 +00:00
David Greenman
3c6e6efc95 Added manual page for DEC DEFPA and DEFEA FDDI adapters.
Submitted by:	Matt Thomas
1995-03-14 09:27:20 +00:00
Ollivier Robert
40ac60750c Could some kind soul with commit power please add this site to the mirrors
list? (It should be added at the bottom to the sites serving export-
restricted code, please)

Country         Site and Maintainer
=======         ========================================================
Brazil          ftp://ftp.iqm.unicamp.br/pub/FreeBSD
                Pedro A M Vazquez <vazquez@iqm.unicamp.br>

Reviewed by:	roberto
Submitted by:	Mark Murray <mark@grondar.za>
1995-03-12 22:34:05 +00:00
Gary Clark II
b97fb5afcb Add Ollivier as the main FAQ guy...:) (Whew) 1995-03-11 19:13:26 +00:00
Ollivier Robert
c2766222c3 Add the excellent part on serial communications by Sean Kelly. That's a
great job, thanks Sean !
Reviewed by:	roberto
Submitted by:	Sean Kelly <kelly@fsl.noaa.gov>
1995-03-11 16:48:17 +00:00
Rodney W. Grimes
812a118139 Add protected and empty maninstall: targets.
Submitted by:	Philippe Charnier <charnier@lirmm.fr>
1995-03-10 08:54:42 +00:00
Andras Olah
1dcbf7af64 LIBPCAP -> ${DESTDIR}/usr/lib/libpcap.a 1995-03-08 09:01:32 +00:00
Ollivier Robert
05048ea000 Correct a few URL for ftp.FreeBSD.ORG. 1995-03-07 13:54:44 +00:00
Ollivier Robert
ffa717dd36 Change some names to First_name Last_name with proper capitalization.
Fix a typo.
1995-03-06 09:54:06 +00:00
Ollivier Robert
1dd5ec0345 Add a remark about the new ctm-announce list. Everyone that use CTM
SHOULD subscribe to it.
Reviewed by:	roberto
Submitted by:	Poul-Henning Kamp <phk@login.dknet.dk>
1995-03-05 23:13:08 +00:00
Peter Dufault
cb282243be This time add the real man pages for "pt" and "worm". 1995-03-04 20:56:39 +00:00
Peter Dufault
8bcbc1f424 Add processor and worm drivers 1995-03-04 20:54:24 +00:00
Andrey A. Chernov
a1bb896c3a Use \E[x in "op" for cons25 1995-03-04 20:14:28 +00:00
Dima Ruban
21fa3d85e3 "vidcontrol -s" -> "modload" 1995-03-04 08:03:28 +00:00
Gary Palmer
3c4d31f1c8 Add support to miss out ``DUDS'' subdirectories. See thread in freebsd-ports
for more.
1995-03-03 23:30:32 +00:00
Andrey A. Chernov
12a34c80d0 Upgrade cons25 and cons25-r to lastest syscons changes 1995-03-03 23:29:22 +00:00
Andrey A. Chernov
2a999a94c3 Remap Grey Delete to ESC[~ 1995-03-03 23:21:52 +00:00
Andrey A. Chernov
72fe72793f Remove unwanted change sneaked in 1995-03-03 23:17:32 +00:00
Andrey A. Chernov
ac9de083c6 Restore russian traditions 1995-03-03 22:55:02 +00:00
Jordan K. Hubbard
fe8d7aae57 Remove bogus email message from the top.
Change spelling of "obsolute" to "obsolete" ("obsolute" is the pinacle
of obsolescence :-).
Submitted by:	me
1995-03-03 20:17:16 +00:00
Stefan Eßer
9aae4932d6 Have this resemble an actual german keyboard a bit more ... 1995-03-03 18:26:10 +00:00
Søren Schmidt
dc463a367e Minor update to syscons.
Let "grey delete" be a function key (default is 0x7f)
Fix the xor cursor again..
Made the backspace key generate del as default
Made CTRL-space generate nul as default.
1995-03-03 08:37:52 +00:00
Jordan K. Hubbard
0722449a9b Back out my previous change. I need to really think about this. 1995-03-03 07:42:10 +00:00
Jordan K. Hubbard
493d75a9d5 A small feature just for my own use. 1995-03-03 06:53:27 +00:00
Gary Clark II
0e6a76efea Add notice for Jordans submitters.FAQ.
Cleaned up entry on sup to point to the correct area.
1995-03-02 19:34:05 +00:00
Jordan K. Hubbard
3d0dfb4eea My first rough cut at a guide to new submitters. I started out answering
someone's question and ended up writing an entire FAQ - I *hate* that! :-)
1995-03-02 12:28:04 +00:00
Jordan K. Hubbard
f0ce30bcf4 Add this file here so I finally have something to point people at as a
prototype.
Obtained from: U.C. Regents standard copyright.
1995-03-02 12:00:16 +00:00
Jordan K. Hubbard
d3468839bf Add Bill Paul to contributors list. We probably need a "FreeBSD associates"
list or something since there are many contributors now but very few on
the order of folks like Bill or Satoshi or Jean-Marc..  This seems unfair.
Suggestions?
1995-03-02 07:20:59 +00:00
Peter Dufault
2460bdf04b Updated man pages to reflect new configuration options. These man pages
are getting pretty out of date and need to be visited some more.
1995-03-01 22:32:38 +00:00
Poul-Henning Kamp
d33ac9d9a8 Update entry. 1995-03-01 06:43:12 +00:00
Gary Clark II
87d17a3130 Update some of the FTP entries here.
Also correct name of sup package
1995-03-01 06:12:15 +00:00
Poul-Henning Kamp
3938d930a1 Try to be even more understandable and clear.
What I need is a good speech writer...
1995-03-01 05:41:14 +00:00
Paul Traina
90e614df0f Fix a minor grammar bug. 1995-02-28 00:24:47 +00:00
Andreas Schulz
db312e6697 Delete one of the two references to intro(3) in the SEE ALSO section
and add an intro(7) instead.
1995-02-28 00:19:41 +00:00
Andreas Schulz
ecea97a372 build the link from man8/man8.i386/MAKEDEV.8 toman8/MAKEDEV.8 so that this
manual page can now also be read.
Change the references in MAKEDEV from com to tty and delete flog and add
sd instead.
Need much more work, but for today, after i lost my first changes through
a new sup :-), that's enough.
1995-02-28 00:16:13 +00:00
Jordan K. Hubbard
16818161a3 Many stylistic and grammar changes. 1995-02-28 00:13:20 +00:00
Poul-Henning Kamp
c855f71f96 Updated. 1995-02-27 23:58:19 +00:00
Ugen J.S. Antsilevich
446cbcf7ed Snoop device stuff
* Make snoop see the output in tty ECHO mode
 * Allow writing to observed tty (very funny)
 * Fix and extend watch util.
 * Fix and update manpages
1995-02-27 19:45:57 +00:00
Poul-Henning Kamp
841d930e9d Another shameless plug for CTM :-) 1995-02-27 08:31:19 +00:00
Poul-Henning Kamp
015d0d4157 Document CTM now that it went public. 1995-02-27 08:25:53 +00:00