just "when the queue is busy."
After talking with the MAC team, it turns out that the linked list
implementation sometimes will not accept a TxDP update and will
instead re-read the link pointer. So even if the hardware has
finished transmitting a chain and has hit EOL/VEOL, it may still
re-read the link pointer to begin transmitting again.
So, always set ATH_BUF_BUSY on the last buffer in the chain (to
mark the last descriptor as the holding descriptor) and never
blank the axq_link pointer.
Tested:
* AR5416, STA mode
TODO:
* much more thorough testing with the pre-11n NICs, just to verify
that they behave the same way.
* test TDMA on the 11n and non-11n hardware.
kernel-based POSIX semaphore descriptors to userland via procstat(1) and
fstat(1):
- Change sem file descriptors to track the pathname they are associated
with and add a ksem_info() method to copy the path out to a
caller-supplied buffer.
- Use the fo_stat() method of shared memory objects and ksem_info() to
export the path, mode, and value of a semaphore via struct kinfo_file.
- Add a struct semstat to the libprocstat(3) interface along with a
procstat_get_sem_info() to export the mode and value of a semaphore.
- Teach fstat about semaphores and to display their path, mode, and value.
MFC after: 2 weeks
This test case sometimes fails because of an EINTR-related race condition.
Fixing this race condition likely requires an extra system call per byte,
which would make the read builtin even slower than it already is, or very
complicated trickery. Therefore, remove the test case for now.
it was being passed down to VOP_IOCTL() where it promptly resulted in
ENOTTY due to a missing else for the past 8 years. While here, use a
shared vnode lock while fetching the current file's size.
MFC after: 1 week
- vm_phys_alloc_freelist_pages() can be called by vm_page_alloc_freelist()
to allocate a page from a specific freelist. In the NUMA case it did not
properly map the public VM_FREELIST_* constants to the correct backing
freelists, nor did it try all NUMA domains for allocations from
VM_FREELIST_DEFAULT.
- vm_phys_alloc_pages() did not pin the thread and each call to
vm_phys_alloc_freelist_pages() fetched the current domain to choose
which freelist to use. If a thread migrated domains during the loop
in vm_phys_alloc_pages() it could skip one of the freelists. If the
other freelists were out of memory then it is possible that
vm_phys_alloc_pages() would fail to allocate a page even though pages
were available resulting in a panic in vm_page_alloc().
Reviewed by: alc
MFC after: 1 week
* If read -t times out, return status as if interrupted by SIGALRM
(formerly 1).
* If a trapped signal interrupts read, return status 128+sig (formerly 1).
* If [EINTR] occurs but there is no trap, retry the read (for example
because of a SIGWINCH in interactive mode).
* If a read error occurs, write an error message and return status 2.
As before, a variable assignment error returns 2 and discards the remaining
data read.
- remove DA_FLAG_SAW_MEDIA flag, almost opposite to DA_FLAG_PACK_INVALID,
using the last instead.
- allow opening device with no media present, reporting zero media size
and non-zero sector size, as geom/notes suggests. That allow to read
device attributes and potentially do other things, not related to media.
in reduced memory systems.
- Split allocation and freeing of the configuration descriptor into a separate
function, so that the configuration descriptor can be made fixed size
to save memory allocations. This applies for both device and host mode.
There is no point in hiding, e.g. pmc.xscale(3) from a developer running
on amd64, when the target arch in question will probably never have
manual pages installed at all.
Reviewed by: sbruno, hiren
Alexander de nieuwe koning. Koningsdag is op 27 April.
On 30 April 2013 queen Beatrix resigned and crownprince Willem
Alexander became the new king. King's day is on 27 April.
MFC after: 1 week
If this capability is negotiated by the guest then the device will
generate an interrupt when it runs out of available tx/rx descriptors.
Reviewed by: grehan
Obtained from: NetApp
system crash which happen after successfull fsync() return, the data
is accessible. For msdosfs, this means that FAT entries for the file
must be written.
Since we do not track the FAT blocks containing entries for the
current file, just do a sloppy sync of the devvp vnode for the mount,
which buffers, among other things, contain FAT blocks.
Simultaneously, for deupdat():
- optimize by clearing the modified flags before short-circuiting a
return, if the mount is read-only;
- only ignore the rest of the function for denode with DE_MODIFIED
flag clear when the waitfor argument is false. The directory buffer
for the entry might be of delayed write;
- microoptimize by comparing the updated directory entry with the
current block content;
- try to cluster the write, fall back to bawrite() if low on
resources.
Based on the submission by: bde
MFC after: 2 weeks
insmntque() is called. The standard insmntque destructor resets the
vop vector to deadfs one, and calls vgone() on the vnode. As result,
v_object is kept unchanged, which triggers an assertion in the reclaim
code, on instmntque() failure. Also, in this case, OBJ_TMPFS flag on
the backed vm object is not cleared.
Provide the tmpfs insmntque() destructor which properly clears
OBJ_TMPFS flag and resets v_object.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
names within the std namespace (and possibly within the global
namespace).
The main advantage is that the C++ versions can provide optimized
versions or simplified interfaces.
versions than the one in base (dim@ mentioned he tried on 4.7.3 and 4.8.1)
do not whine about it, so, at some point this workaround will be reverted.
Reported by: ache
Discussed with: dim
to query ATA functionality via ATA Pass-Through (16) as this page is defined
as "must" for SATL devices, hence indicating that the device is at least
likely to support Pass-Through (16).
This eliminates errors produced by CTL when ATA Pass-Through (16) fails.
Switch ATA probe daerror call to SF_NO_PRINT to avoid errors printing out
for devices which return invalid errors.
Output details about supported and choosen delete method when verbose booted.
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 1 week
Ensure that delete_available is reset so re-probes after a media change,
to one with different delete characteristics, will result in the correct
methods being flagged as available.
Make all ccb state changes use a consistent flow:
* free()
* xpt_release_ccb()
* softc->state = <new state>
* xpt_schedule()
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 1 week
that it handles the ERANGE error return case. Without this fix, authentication
of users for certain system setups could fail unexpectedly.
Reported by: Elias Martenson (lokedhs@gmail.com)
Tested by: Elias Martenson (earlier version)
MFC after: 2 weeks
the ERANGE error return case. Without this fix, authentication
of users for certain system setups could fail unexpectedly.
Reported by: Elias Martenson (lokedhs@gmail.com)
Tested by: Elias Martenson (earlier version)
MFC after: 2 weeks
The initial version of this came from Sandvine but had "PROVIDED BY NETAPP,
INC" in the copyright text, presuambly because the license block was copied
from another file. Replace it with standard "AUTHOR AND CONTRIBUTORS" form.
Approvided by: grehan@
The QCA9565 is a 1x1 2.4GHz 11n chip with integrated on-chip bluetooth.
The AR9300 HAL already has support for this chip; it just wasn't
included in the probe/attach path.
Tested:
* This commit brought to you over a QCA9565 wifi connection from
FreeBSD.
* .. ie, basic STA, pings, no iperf or antenna diversity checking just yet.
bsd.port.mk can set .MAKE.FreeBSD_UL=yes
to cause :L and :U to have their old behavior.
This should be reverted when 8.3 is EOL.
PR: 173299
Reviewed by: obrien
