thought I've decided its overkill,a simple tuneable for
each RX and TX limit, and then init sets the ring values
based on that, should be sufficient.
More importantly, fix a bug causing a panic, when changing
the define style to IXGBE_LEGACY_TX a taskqueue init was
inadvertently set #ifdef when it should be #ifndef.
UPDATING by URL.
As there has been some confusion over the need to run "mergemaster -p",
part of our standard upgrade procedure, following the recent addition of
an "auditdistd" user, add a note about it to UPDATING explicitly.
I couldn't think of a way to maintain the hardware TXQ locks _and_ layer
on top of that per-TXQ software queuing and any other kind of fine-grained
locks (eg per-TID, or per-node locks.)
So for now, to facilitate some further code refactoring and development
as part of the final push to get software queue ps-poll and u-apsd handling
into this driver, just do away with them entirely.
I may eventually bring them back at some point, when it looks slightly more
architectually cleaner to do so. But as it stands at the present, it's
not really buying us much:
* in order to properly serialise things and not get bitten by scheduling
and locking interactions with things higher up in the stack, we need to
wrap the whole TX path in a long held lock. Otherwise we can end up
being pre-empted during frame handling, resulting in some out of order
frame handling between sequence number allocation and encryption handling
(ie, the seqno and the CCMP IV get out of sequence);
* .. so whilst that's the case, holding the lock for that long means that
we're acquiring and releasing the TXQ lock _inside_ that context;
* And we also acquire it per-frame during frame completion, but we currently
can't hold the lock for the duration of the TX completion as we need
to call net80211 layer things with the locks _unheld_ to avoid LOR.
* .. the other places were grab that lock are reset/flush, which don't happen
often.
My eventual aim is to change the TX path so all rejected frame transmissions
and all frame completions result in any ieee80211_free_node() calls to occur
outside of the TX lock; then I can cut back on the amount of locking that
goes on here.
There may be some LORs that occur when ieee80211_free_node() is called when
the TX queue path fails; I'll begin to address these in follow-up commits.
which dumps out the actual options being used by an NFS mount.
This will be used to implement a "-m" option for nfsstat(1).
Reviewed by: alfred
MFC after: 2 weeks
This brand of controllers expects that the number of
contexts specified in the input slot context points
to an active endpoint context, else it refuses to
operate.
- Ring the correct doorbell when streams mode is used.
- Wrap one or two long lines.
Tested by: Markus Pfeiffer (DragonFlyBSD)
MFC after: 1 week
The changes were derived from what has been committed to NetBSD, with
modifications. These are:
1. Preserve the existsing GLOB_LIMIT behaviour by including the number
of matches to the set of parameters to limit.
2. Change some of the limits to avoid impacting normal use cases:
GLOB_LIMIT_STRING - change from 65536 to ARG_MAX so that glob(3)
can still provide a full command line of expanded names.
GLOB_LIMIT_STAT - change from 128 to 1024 for no other reason than
that 128 feels too low (it's not a limit that impacts the
behaviour of the test program listed in CVE-2010-2632).
GLOB_LIMIT_PATH - change from 1024 to 65536 so that glob(3) can
still provide a fill command line of expanded names.
3. Protect against buffer overruns when we hit the GLOB_LIMIT_STAT or
GLOB_LIMIT_READDIR limits. We append SEP and EOS to pathend in
those cases. Return GLOB_ABORTED instead of GLOB_NOSPACE when we
would otherwise overrun the buffer.
This change also modifies the existing behaviour of glob(3) in case
GLOB_LIMIT is specifies by limiting the *new* matches and not all
matches. This is an important distinction when GLOB_APPEND is set or
when the caller uses a non-zero gl_offs. Previously pre-existing
matches or the value of gl_offs would be counted in the number of
matches even though the man page states that glob(3) would return
GLOB_NOSPACE when gl_matchc or more matches were found.
The limits that cannot be circumvented are GLOB_LIMIT_STRING and
GLOB_LIMIT_PATH all others can be crossed by simply calling glob(3)
again and with GLOB_APPEND set.
The entire description above applies only when GLOB_LIMIT has been
specified of course. No limits apply when this flag isn't set!
Obtained from: Juniper Networks, Inc
Programming the low bits has a side-effect if unmasking the pin if it is
not disabled. So if an interrupt was pending then it would be delivered
with the correct new vector but to the incorrect old LAPIC.
This fix could be made clearer by preserving the mask bit while
programming the low bits and then explicitly resetting the mask bit
after all the programming is done.
Probability to trip over the fixed bug could be increased by bootverbose
because printing of the interrupt information in ioapic_assign_cpu
lengthened the time window during which an interrupt could arrive while
a pin is masked.
Reported by: Andreas Longwitz <longwitz@incore.de>
Tested by: Andreas Longwitz <longwitz@incore.de>
MFC after: 12 days
Also, make it explicit that V_XATTRDIR is not properly supported in gfs
code yet.
The bad code was plain incorrect: (a) it spoiled handling of v_usecount
reaching zero and (b) it leaked v_holdcnt.
The ugly code employs potentially unsafe locking tricks.
Ideally we should separate vnode lifecycle and gfs node lifecycle.
A gfs node should have its own reference count where its child nodes
should be accounted.
PR: kern/151111
Reviewed by: kib
MFC after: 13 days
... to avoid any races or inconsistencies.
This should fix a regression introduced in r243404.
Also, remove a stale comment that has not been true for quite a while
now.
Pointyhat to: avg
Teested by: trociny, emaste, dumbbell (earlier version)
MFC after: 1 week
equivalent to malloc(size). This eliminates the conditional expression
used for calling either realloc() or malloc() when realloc() will do
all the time.
free and clear the gl_pathv pointer in the glob_t structure. Such
breaks the invariant of the glob_t structure, as stated in the comment
right in front of the globextend() function. If gl_pathv was non-NULL,
then gl_pathc was > 0. Making gl_pathv a NULL pointer without also
setting gl_pathc to 0 is wrong.
Since we otherwise don't free the memory associated with a glob_t in
error cases, it's unlikely that this change will cause a memory leak
that wasn't already there to begin with. Callers of glob(3) must
call globfree(3) irrespective of whether glob(3) returned an error
or not.
auditdistd (distributed audit daemon) to the build:
- Manual cross references
- Makefile for auditdistd
- rc.d script, rc.conf entrie
- New group and user for auditdistd; associated aliases, etc.
The audit trail distribution daemon provides reliable,
cryptographically protected (and sandboxed) delivery of audit tails
from live clients to audit server hosts in order to both allow
centralised analysis, and improve resilience in the event of client
compromises: clients are not permitted to change trail contents
after submission.
Submitted by: pjd
Sponsored by: The FreeBSD Foundation (auditdistd)
src/sys/{bsm,security/audit}. There are a few tweaks to help with the
FreeBSD build environment that will be merged back to OpenBSM. No
significant functional changes appear on the kernel side.
Obtained from: TrustedBSD Project
Sponsored by: The FreeBSD Foundation (auditdistd)
enforcing the TXOP and TBTT limits:
* Frames which will overlap with TBTT will not TX;
* Frames which will exceed TXOP will be filtered.
This is not enabled by default; it's intended to be enabled by the
TDMA code on 802.11n capable chipsets.
the revamped sysctl code did not work, and needed a change. This
makes the limit get set at the time that all sysctl stats are
created and is actually more elegant imho anyway.
TX hot path by getting rid of index calculations and simply
managing pointers. Much of the creative code is due to my
coworker here at Intel, Alex Duyck, thanks Alex!
Also, this whole series of patches was given the critical
eye of Gleb Smirnoff and is all the better for it, thanks
Gleb!
vendor area; these sort out various post-release issues, largely to do
with integrating OpenBSM with the base FreeBSD build. All of these
changes will appear in a future 1.2-alpha3:
Change 219846 on 2012/11/26 by rwatson@rwatson_cinnamon
Update several instances of Apple Computer to Apple; a change made
in the FreeBSD tree some years ago but not propagated to OpenBSM.
Change 219845 on 2012/11/26 by rwatson@rwatson_cinnamon
Remove Apple acknowledgement clause from file with Christian
Peron copyright (with permission from Christian).
Change 219836 on 2012/11/23 by rwatson@rwatson_cinnamon
Replace further instances of <> with "" for local includes in
auditdistd.
Change 219834 on 2012/11/23 by rwatson@rwatson_cinnamon
For current-directory headers, use #include "" rather than #include
<>.
Change 219832 on 2012/11/23 by rwatson@rwatson_cinnamon
Be more consistent with the remainder of OpenBSM and include
config/config.h rather than config.h.
Don't include config.h from synch.h, which is included only from
.c files that already include config.h.
Change 219831 on 2012/11/23 by pjd@pjd_anger
Add Xref to auditdistd(8).
Suggested by: rwatson
Obtained from: TrustedBSD Project
Sponsored by: The FreeBSD Foundation (auditdistd)
This commit adds a new mode option 'e' that must follow any 'b', '+' and/or
'x' options. C11 is clear about the 'x' needing to follow 'b' and/or '+' and
that is what we implement; therefore, require a strict position for 'e' as
well.
For freopen() with a non-NULL path argument and fopen(), the close-on-exec
flag is set iff the 'e' mode option is specified. For freopen() with a NULL
path argument and fdopen(), the close-on-exec flag is turned on if the 'e'
mode option is specified and remains unchanged otherwise.
Although the same behaviour for fopen() can be obtained by open(O_CLOEXEC)
and fdopen(), this needlessly complicates the calling code.
Apart from the ordering requirement, the new option matches glibc.
PR: kern/169320
OpenBSM 1.2 alpha 2
- auditdistd, a distributed audit trail management daemon, has now been
merged. This allows trail files to be securely and reliably synced from
audited hosts to an audit server, and employs TLS encryption. Where
available, it uses Capsicum to sandbox the service. This work was
contributed by Pawel Jakub Dawidek under sponsorship from the FreeBSD
Foundation.
OpenBSM 1.2 alpha 1
- Add Capsicum-related error numbers for FreeBSD: ENOTCAPABLE, ECAPMODE.
- Add Capsicum, process descriptor audit events for FreeBSD.
- Allow 0% minspace.
- Fixes from the clang static analyser.
- Fix expiration of trail files when the host parameter is used.
- Various typo fixes.
- Support for Solaris privilege and privilege set tokens.
- Documentation for getachost(), improvements for getacfilesz().
- Fix a directory descriptor leak that happened when audit trail partitions
filled.
- Support for more Linux distributions with a partial contemporary endian.h.
- Improved escaping of XML-encapsulated BSM.
- A variety of minor documentation, style, and functional.
Obtained from: TrustedBSD Project
Sponsored by: The FreeBSD Foundation (auditdistd)
- add a limit for both RX and TX, change the default to 256
- change the sysctl usage to be common, and now to be called
during init for each ring.
- the TX limit is not yet used, but the changes in the last
patch in this series uses the value.
- the motivation behind these changes is to improve data
locality in the final code.
- rxeof interface changes since it now gets limit from the
ring struct
