bouncing of unmapped buffers. Also treat userspace buffers as unmapped, to
avoid borrowing the UVA for copies. This allows sync'ing userspace buffers
outside the context of the owning process, and sync'ing bounced maps in
non-sleepable contexts.
This change is equivalent to r286787 for x86.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D3989
turn them into a shared definition.
Set M_MCAST/M_BCAST appropriately upon packet reception in net80211, just
before they are delivered up to the ethernet stack.
Submitted by: rstone
* remove the DEBUG ifdef; defining it is too far reaching throughout
the whole system;
* add a bitmask in the softc for controlling debugging;
* .. enable said debugging as a sysctl;
* add bitmaps for register access, reset and vlans.
TODO:
* Now that the debug statements are configurable, we definitely could
do with more debugging
* Move the debugging into the top-level etherswitch driver and have
sub-drivers obey.
This work, originally from Stacey Son, uses the MIPS UserReg for
reading the TLS data, and will fall back to the normal syscall path
when it isn't supported.
This code dynamically patches cpu_switch() to bypass the UserReg
instruction so to avoid generating a machine exception.
Thanks to sson for the original work, and to Dan Nelson for
bringing it to date and testing it on MIPS32 with me.
Tested:
* mips64 (sson)
* mips74k (dnelson_1901@yahoo.com) - AR9344 SoC, UserReg support
* mips24k (adrian) - AR9331 SoC, no UserReg support
Obtained from: sson, dnelson_1901@yahoo.com
removing CFLAGS+= -static
`CFLAGS+= -static` was a carryover from pre-r289195 with
usr.bin/tar/test/Makefile that should have been specified in LDFLAGS
There doesn't seem to be an apparent need for static compilation
of the test binaries.
Differential Revision: https://reviews.freebsd.org/D7430
MFC after: 1 week
Obtained-from: opBSD (418a491eed20d2603ddd1f1bd92c2c0d95094002)
Submitted by: op
Sponsored by: EMC / Isilon Storage Division
Make FDT blob available via opaque hw.fdt.dtb sysctl, if a DTB has been
installed by the time sysctls are registered.
Reviewed by: andrew
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7411
These are currently unused in our implementation and some even appear to
have not been implemented yet on linux but it is good to keep them for
reference.
Obtained from: NetBSD (CVS Rev. 1.41)
MFC after: 1 month
The partition_name field is an array, so can never be NULL itself. Check only
the first byte instead.
This was found when test building with clang, but I'm not sure how it passes
gcc's warnings either.
* Use the right incantation to get the next stack pointer. Since powerpc uses
special frames for traps, dereferencing the stack pointer straight up won't
get us the next stack pointer in every case.
* Clear EE using the correct instruction sequence. The PowerISA states that
'andi.' ANDs the register with 0||<imm>, instead of sign extending or filling
out the unavailable bits with 1. Even if it did sign extend, PSL_EE is
0x8000, so ~PSL_EE is 0x7fff, and the upper bits would be cleared. Use rlwinm
in the 32-bit case, and a two-rotate sequence in the 64-bit case, the latter
chosen to follow the output generated by gcc.
MFC after: 1 week
This is the backing feature to implement C++11 thread storage duration
specified by the thread_local keyword. A destructor for given
thread-local object is registered to be executed at the thread
termination time using __cxa_thread_atexit(). Libc calls the
__cxa_thread_calls_dtors() during exit(3), before finalizers and
atexit functions, and libthr calls the function at the thread
termination time, after the stack unwinding and thread-specific key
destruction.
There are several uncertainties in the API which lacks a formal
specification. Among them:
- is it allowed to register destructors during destructing;
we allow, but limiting the nesting level. If too many iterations
detected, a diagnostic is issued to stderr and thread forcibly
terminates for now.
- how to handle destructors which belong to an unloading dso;
for now, we ignore destructor calls for such entries, and
issue a diagnostic. Linux does prevent dso unload until all
threads with destructors from the dso terminated.
It is supposed that the diagnostics allow to detect real-world
applications relying on the above details and possibly adjust
our implementation. Right now the choices were to provide the slim
API (but that rarely stands the practice test).
Tests are added to check generic functionality and to specify some of
the above implementation choices.
Submitted by: Mahdi Mokhtari <mokhi64_gmail.com>
Reviewed by: theraven
Discussed with: dim (detection of -std=c++11 supoort for tests)
Sponsored by: The FreeBSD Foundation (my involvement)
MFC after: 2 weeks
Differential revisions: https://reviews.freebsd.org/D7224,
https://reviews.freebsd.org/D7427
The problem is that the special .zfs nodes are not represented by
znodes but by special gfs-based nodes.
r303763 changed interface of zfs_dirlook such that started operating on
znodes rather than on vnodes and, thus, the function became unsuitable
for handling .zfs entities.
The solution is to move the handling of the special cases to zfs_lookup,
the only consumer of zfs_dirlook.
I already had this solution applied in D7421, but for different reasons.
Reported by: asomers
MFC after: 3 days
X-MFC with: r303763
The interpretation of the Electromechanical Interlock Status was
inverted, so we disengaged the EI if a card was inserted.
Fix it to engage the EI if a card is inserted.
When displaying the slot capabilites/status with pciconf:
- We inverted the sense of the Power Controller Control bit,
saying the power was off when it was really on (according to
this bit). Fix that.
- Display the status of the Electromechanical Interlock:
EI(engaged)
EI(disengaged)
Reviewed by: jhb
MFC after: 3 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7426
During the last attempt to rmeove GNU rcs, 2 blockers were spotted:
We need an ident(1) and etcupdate(8) uses merge(1).
Now nothing should prevent to remove rcs from base
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D7401
2 extra options not available neither on other BSD nor in GNU sdiff:
--diff-pid and --pipe-fd were present in the SoC code, none were usable
Just remove it
* add an ANY debug level which will always echo the message if debugging
is compiled in;
* log MDIO transaction timeouts if debugging is compiled in;
* the argemdio device is different to arge, so turning on MDIO debugging
flags in arge->sc_debug doesn't help. Add a debug sysctl to argemdio
as well so that MDIO transactions can be debugged.
Tested:
* AR9331
Simplify the logic involved in changing the nic features on the fly, and
only reset the frontend when really needed (when changing RX features). Also
don't return from the ioctl until the interface has been properly
reconfigured.
While there, make sure XN_CSUM_FEATURES is used consistently.
Reported by: julian
MFC after: 5 days
X-MFC-with: r303488
Sponsored by: Citrix Systems R&D
This keeps the segments/ACK/FIN delivery order.
Before this patch, it was observed: if A sent FIN immediately after
an ACK, B would deliver FIN first to the TCP stack, then the ACK.
This out-of-order delivery causes one unnecessary ACK sent from B.
Reviewed by: gallatin, hps
Obtained from: rrs, gallatin
Sponsored by: Netflix (rrs, gallatin), Microsoft (sephe)
Differential Revision: https://reviews.freebsd.org/D7415
ZFS POSIX Layer is originally written for Solaris VFS which is very
different from FreeBSD VFS. Most importantly many things that FreeBSD VFS
manages on behalf of all filesystems are implemented in ZPL in a different
way.
Thus, ZPL contains code that is redundant on FreeBSD or duplicates VFS
functionality or, in the worst cases, badly interacts / interferes
with VFS.
The most prominent problem is a deadlock caused by the lock order reversal
of vnode locks that may happen with concurrent zfs_rename() and lookup().
The deadlock is a result of zfs_rename() not observing the vnode locking
contract expected by VFS.
This commit removes all ZPL internal locking that protects parent-child
relationships of filesystem nodes. These relationships are protected
by vnode locks and the code is changed to take advantage of that fact
and to properly interact with VFS.
Removal of the internal locking allowed all ZPL dmu_tx_assign calls to
use TXG_WAIT mode.
Another victim, disputable perhaps, is ZFS support for filesystems with
mixed case sensitivity. That support is not provided by the OS anyway,
so in ZFS it was a buch of dead code.
To do:
- replace ZFS_ENTER mechanism with VFS managed / visible mechanism
- replace zfs_zget with zfs_vget[f] as much as possible
- get rid of not really useful now zfs_freebsd_* adapters
- more cleanups of unneeded / unused code
- fix / replace .zfs support
PR: 209158
Reported by: many
Tested by: many (thank you all!)
MFC after: 5 days
Sponsored by: HybridCluster / ClusterHQ
Differential Revision: https://reviews.freebsd.org/D6533
r296773 was done to only remove libc symbols for <7. We want to provide
the syscall symbols going forward for 7+.
Discussed with: jhb
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
In particular, fix factual, grammatical, and spelling errors in various
comments, and remove comments that are out of place in this function.
Reviewed by: kib, markj
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7410
