The GNU Unifont .hex format is a text file. Each line represents one
glyph and consists of a four-digit hex code point, a colon, and pairs of
hex digits representing the bitmap. By default an 8x16 font is assumed,
with 16x16 double-width glyphs, resulting in either 32 or 64 hex digits
for the bitmap.
Our version of the file format supports comments at the top of the file
to set the height and width:
# Height: <decimal height>
# Width: <decimal width>
Each row of bitmap data is rounded up to byte width - for example, a
10-pixel wide font uses 4 characters per row.
See http://czyborra.com/unifont/ for more background on the original
format.
Sponsored by: The FreeBSD Foundation
- Remove double buffering interrupt and isochronous traffic via the
transaction translator. It can be avoided because the DWC OTG will
always delay the start split transactions for interrupt and
isochronous traffic, but will not delay the complete split
transactions, if we set the odd frame bit correctly.
- Need to check the transfer cache field in the device done function
to be sure all allocated channels are freed and not the transfer first
one. This seems to resolve the control endpoint transfer type quirk
which is now removed.
- Make sure any received data upon TX is dumped else RX path will
stop.
- Transmit isochronous data before receiving isochronous data as a
means to optimise the TT schedule.
- Implement a simple TT bandwidth scheduler.
- Cleanup use of old "td->error" variable.
- On interrupt IN traffic via the transaction translator we simply
ignore missed transfer opportunities and silently retry the
transaction upon next available time slot.
MFC after: 3 days
trims to the device assumes the list is sorted. Don't apply the
optimization of not sorting the queue when we have SSDs to the
delete_queue, since it causes more discard traffic to the drive. While
one could argue that the higher levels should coalesce the trims,
that's not done today, so some optimization at this level is needed.
CR: https://phabric.freebsd.org/D142
"Terminus BSD Console" is a derivative of Terminus that is provided
by Mr. Dimitar Zhekov under the 2-clause BSD license for use by the FreeBSD vt(4) console.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
- Properly align temporary buffer to 32-bit.
- Add an extra parenthesis to make expression clear.
- Range check the association ID received from hardware.
MFC after: 1 week
A similar fix should be applied to vmxnet, ixgbe, igb, i40e.
(some of them previously reported by Michael Tuexen)
Drivers using if_transmit are correct, and so are most of the
other drivers that reassing if_transmit.
Among other things, this bug causes panics when using netmap emulation
on top of generic drivers.
Approved by: bryanv
MFC after: 3 days
Core i7 and Westmere processors, the uncore PMC subsystem is
completely different from the uncore PMC on smaller versions of CPUs.
Disable existing uncore hwpmc code for EX, otherwise non-existing MSRs
are accessed.
The cores PMCs seems to be identical for non-EX and EX, according to
the SDM.
Reviewed by: davide, fabient
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- The R92S_TCR register is an 8-bit register. Don't access it like a
16-bit register.
- Disable parsing the delete station event, due to many false events.
- Ensure that there is only one transfer queue for each endpoint, so
that packets transmitted don't get out of order.
MFC after: 1 week
- Reformat the entire man page
- Create a proper synopsis section
- Use itemized-lists to describe each flag, rather than paragraphs
- Cross-reference common flags to a 'general flags' sub-section with short
inline description of the flag
- Label 'general flags' sub-section
- Apply additional fixes suggested by wblock, brueffer, and bdrewery
- Update .Dd that got undone previously
- Change the order of the .Op Fl to be alphabetical
- Add the -i | -I interface flags to the description of 'interface
display mode'
- Fix missing parameters in man page
- Fix missing parameters in usage()
- Sync man page and usage()
MFC Note: stable/9 and stable/10 do not have -R, will need to be removed
when merged
CR: D58
Reviewed by: brueffer, bcr
Approved by: wblock (mentor)
MFC after: 7 days
Sponsored by: ScaleEngine Inc.
Walking a linked list of all glyphs to look for a duplicate is very slow
for large fonts (e.g., for CJK character sets). In my test the runtime
for a sample 40000 character font went from just over 80 seconds on
average to just over 2 seconds.
Sponsored by: The FreeBSD Foundation
The description of WITH/WITHOUT tweaks should only document the non-default
option. TESTS still defaults to no, so the option to be documented is
WITH_TESTS.
If you had a UFS2 FS that didn't have it's super block at SBLOCK_UFS2,
you'll end up corrupting your FS as the superblock is updated and written
to a different location...
makefs used to put the superblock at SBLOCK_UFS1 for UFS 2 FS's causing
this issue...
Reviewed by: silience from mckusick
MFC after: 1 week
selection. gethrtime() in our port updated with HZ rate, so unusable for
this specific purpose, completely draining benefit of multiple taskqueues.
MFC after: 2 weeks
(7-bit device address << 1), always leaving the room for the read/write bit.
This commit convert ti_i2c and revert r259127 on bcm2835_bsc to make them
compatible with 8-bit addresses. Previous to this commit an i2c device
would have different addresses depending on the controller it was attached
to (by example, when compared to any iicbb(4) based i2c controller), which
was a pretty annoying behavior.
Also, update the PMIC i2c address on beaglebone* DTS files to match the new
address scheme.
Now the userland utilities need to do the correct slave address shifting
(but it is going to work with any i2c controller on the system).
Discussed with: ian
MFC after: 2 weeks
The ti_i2c controller only works in the master mode and the i2c address
passed on iicbus_reset() is used to set the controller slave address when
operating as an i2c slave (which isn't currently supported).
When talking to a slave, the slave address is correctly provided to
ti_i2c_tranfer().
o Always init locks and cv ASAP.
o Initialize driver-independent parts even if driver probing fail.
o Allow to call vt_upgrade anytime, for later loaded drivers.
o New window flag VWF_READY, to track if window already initialized.
Other updates:
o Pass vd as a cookie for kbd_allocate.
o Do not blank window on driver replacement.
Tested by: hselasky (RPi), emaste(VGA, EFIFB, KMS), me
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
