Commit Graph

76 Commits

Author SHA1 Message Date
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Joel Dahl
d821b5aa40 Fix the gap between mute and lowest possible volume. The es1370 mixer
volumes were incorrectly calculated.

I've tested this with one of my es1370 cards and I can confirm that it
works.

PR:		98167
Submitted by:	Joseph Terner <jtsn@gmx.de>
Approved by:	kib
2010-04-01 11:30:46 +00:00
Joel Dahl
2ee4e98c7e Move es137x.c and es137x.h to a 2-clause BSD license. Also move a few
comments.

Submitted by:	Joachim Kuebart
Approved by:	core, Russell Cattelan <cattelan@thebarn.com>
2009-09-22 13:23:59 +00:00
Ariff Abdullah
90da2b2859 Sound Mega-commit. Expect further cleanup until code freeze.
For a slightly thorough explaination, please refer to
	[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includes:

1 Volume Per-Channel (vpc).  Provides private / standalone volume control
  unique per-stream pcm channel without touching master volume / pcm.
  Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for
  backwards compatibility, SOUND_MIXER_PCM through the opened dsp device
  instead of /dev/mixer.  Special "bypass" mode is enabled through
  /dev/mixer which will automatically detect if the adjustment is made
  through /dev/mixer and forward its request to this private volume
  controller.  Changes to this volume object will not interfere with
  other channels.

  Requirements:
    - SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which
      require specific application modifications (preferred).
    - No modifications required for using bypass mode, so applications
      like mplayer or xmms should work out of the box.

  Kernel hints:
    - hint.pcm.%d.vpc (0 = disable vpc).

  Kernel sysctls:
    - hw.snd.vpc_mixer_bypass (default: 1).  Enable or disable /dev/mixer
      bypass mode.
    - hw.snd.vpc_autoreset (default: 1).  By default, closing/opening
      /dev/dsp will reset the volume back to 0 db gain/attenuation.
      Setting this to 0 will preserve its settings across device
      closing/opening.
    - hw.snd.vpc_reset (default: 0).  Panic/reset button to reset all
      volume settings back to 0 db.
    - hw.snd.vpc_0db (default: 45).  0 db relative to linear mixer value.

2 High quality fixed-point Bandlimited SINC sampling rate converter,
  based on Julius O'Smith's Digital Audio Resampling -
  http://ccrma.stanford.edu/~jos/resample/.  It includes a filter design
  script written in awk (the clumsiest joke I've ever written)
    - 100% 32bit fixed-point, 64bit accumulator.
    - Possibly among the fastest (if not fastest) of its kind.
    - Resampling quality is tunable, either runtime or during kernel
      compilation (FEEDER_RATE_PRESETS).
    - Quality can be further customized during kernel compilation by
      defining FEEDER_RATE_PRESETS in /etc/make.conf.

  Kernel sysctls:
    - hw.snd.feeder_rate_quality.
      0 - Zero-order Hold (ZOH).  Fastest, bad quality.
      1 - Linear Interpolation (LINEAR).  Slightly slower than ZOH,
          better quality but still does not eliminate aliasing.
      2 - (and above) - Sinc Interpolation(SINC).  Best quality.  SINC
          quality always start from 2 and above.

  Rough quality comparisons:
    - http://people.freebsd.org/~ariff/z_comparison/

3 Bit-perfect mode.  Bypasses all feeder/dsp effects.  Pure sound will be
  directly fed into the hardware.

4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can
  be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf.

5 Transparent/Adaptive Virtual Channel. Now you don't have to disable
  vchans in order to make digital format pass through.  It also makes
  vchans more dynamic by choosing a better format/rate among all the
  concurrent streams, which means that dev.pcm.X.play.vchanformat/rate
  becomes sort of optional.

6 Exclusive Stream, with special open() mode O_EXCL.  This will "mute"
  other concurrent vchan streams and only allow a single channel with
  O_EXCL set to keep producing sound.

Other Changes:
    * most feeder_* stuffs are compilable in userland. Let's not
      speculate whether we should go all out for it (save that for
      FreeBSD 16.0-RELEASE).
    * kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org>
    * pull out channel mixing logic out of vchan.c and create its own
      feeder_mixer for world justice.
    * various refactoring here and there, for good or bad.
    * activation of few more OSSv4 ioctls() (see [1] above).
    * opt_snd.h for possible compile time configuration:
      (mostly for debugging purposes, don't try these at home)
        SND_DEBUG
        SND_DIAGNOSTIC
        SND_FEEDER_MULTIFORMAT
        SND_FEEDER_FULL_MULTIFORMAT
        SND_FEEDER_RATE_HP
        SND_PCM_64
        SND_OLDSTEREO

Manual page updates are on the way.

Tested by:	joel, Olivier SMEDTS <olivier at gid0 d org>, too many
          	unsung / unnamed heroes.
2009-06-07 19:12:08 +00:00
Ariff Abdullah
36bc8661bf Properly unlock mutex before returning. There was a slight mishap
during last major locking cleanup.

Reported by:	Thierry Herbelot <thierry@herbelot.com>
Approved by:	re (mux)
2007-07-05 10:22:37 +00:00
Ariff Abdullah
082f63835c Flush remaining malloc() cleanups (M_NOWAIT -> M_WAITOK). 2007-06-17 06:10:43 +00:00
Ariff Abdullah
e4e61333ff Last (again ?!?) major commit for RELENG_7, featuring total Giant
eradication in/from userland path, countless locking fixes, etc.

- General sleep call through msleep(9) has been converted to condvar(9)
  with better consistencies.
- Heavily guard every possible "slow path" entries (open(), close(),
  few ioctl()s, sysctls), but once it entering "fast path" (io, interrupt
  started), they are free to fly on their own.
- Rearrange locking sequences, resulting better concurrency and
  serialization. Large part doesn't even need locking at all, and will be
  removed in future. Less clutter, except in few places due to lock
  ordering.
- Anonymous mixer object creation/deletion to simplify mixer handling
  beyond typical mixer ioctls.
  Submitted by:		chibis (with modifications)
- Add few mix_[get|set|..] functions to avoid calling mixer_ioctl()
  directly using cryptic arguments.
- Locking fixes to avoid possible deadlock with (still under Giant) USB.
- Better simplex/duplex device handling.
- Recover mmap() functionality for recording, which has been lost
  since 2.2.x - 3.x (the introduction of newpcm). Full-duplex mmap still
  doesn't work (due to VM/page design), but people still can mmap
  both by opening each direction separately. mmaped playback is guarantee
  to work either way.
- New sysctl: "hw.snd.compat_linux_mmap" to allow PROT_EXEC page
  mapping, due to recent changes in linux compatibility layer which
  require it. All linux applications that using sound + mmap() (mostly games)
  require this to be enabled. Disabled by default.
- Other goodies.. too many, that will increase releng7 shareholder value
  and make users of releng6 (and below) cry ;)

* This commit should be atomic. If anything goes wrong (not counting problem
  originated from elsewhere), I will not hesitate to revert everything back
  within 12 hours. This substantial changes itself not a rocket science
  and the process has begun for almost 2 years, and lots of incremental
  changes are already in place during that period of time.
* Some issues does occur in snd_emu10kx (note the 'x') due to various
  internal locking issues and it is currently being worked on by chibis.

Tested by:	chibis (Yuriy Tsibizov), joel, Alexandre Vieira,
          	many innocent souls...
2007-06-16 03:37:28 +00:00
Ariff Abdullah
5d75db4f00 Drain all callout handlers during driver detach appropriately. 2007-06-14 11:13:38 +00:00
Ariff Abdullah
bdfbdcec6a Filter/compress the amount of channel trigger. This should reduce
much of lock/unlock contentions within the interrupt handler. Most
of these drivers only need PCMTRIG_START or STOP (ABORT).

Discussed with:		scottl
2007-06-11 00:49:46 +00:00
David Malone
041b706b2f Despite several examples in the kernel, the third argument of
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.

Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.

In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported.  In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
2007-06-04 18:25:08 +00:00
Ariff Abdullah
2e334adf6a sndbuf_alloc() now accept dmaflags argument which will be forwarded to
internal bus_dmammem_alloc() for greater flexibility on setting up DMA /
page attributes.
2007-04-18 18:26:41 +00:00
Ariff Abdullah
1042342ad8 [stage: 8/9]
Implement CHANNEL_SETFRAGMENTS() for snd_atiixp, snd_es137x, snd_hda
and snd_via8233. CHANNEL_SETBLOCKSIZE() will basically call
CHANNEL_SETFRAGMENTS() internally using conservative blocksize /
blockcount hints. Other drivers will be converted later.
2007-03-16 17:18:17 +00:00
Ariff Abdullah
4582b3a100 Fix severe out-of-bound mtx "type" pointer, causing WITNESS refcount
confusions and panic provided that the following conditions are met:

  1) WITNESS is enabled (watch/trace).
  2) Using modules, instead of statically linked (Not a strict
     requirement, but easier to reproduce this way).
  3) 2 or more modules share the same mtx type ("sound softc").
     - They might share the same name (strcmp() == 0), but it always
       point to different address.
  4) Repetitive kldunload/load on any module that shares the same mtx
     type (Not a strict requirement, but easier to reproduce this way).

     Consider module A and module B:
     - From enroll() - subr_witness.c:
       * Load module A. Everything seems fine right now.
         wA-w_refcount == 1 ; wA-w_name = "sound softc"
       * Load module B.
       * w->w_name == description will always fail.
         ("sound softc" from A and B point to different address).
       * wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0
       * enroll() will return wA instead of returning (possibly unique)
         wB.
         wA->w_refcount++ , == 2.
       * Unload module A, mtx_destroy(), wA->w_name become invalid,
         but wA->w_refcount-- become 1 instead of 0. wA will not be
         removed from witness list.
       * Some other places call mtx_init(), iterating witness list,
         found wA, failed on wA->w_name == description
       * wA->w_refcount > 0 && strcmp(description, wA->w_name)
       * Panic on strcmp() since wA->w_name no longer point to valid
         address.

Note that this could happened in other places as well, not just sound
(eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK).

Solutions (for sound case):
  1) Provide unique mtx type string for each mutex creation (chosen)
  or
  2) Put "sound softc" global variable somewhere and use it.
2007-03-15 16:41:27 +00:00
Marius Strobl
c2175ff5ca Change the remainder of the drivers for DMA'ing devices enabled in the
sparc64 GENERIC and the sound device drivers known working on sparc64
to use bus_get_dma_tag() to obtain the parent DMA tag so we can get rid
of the sparc64_root_dma_tag kludge eventually. Except for ath(4), sk(4),
stge(4) and ti(4) these changes are runtime tested (unless I booted up
the wrong kernels again...).
2007-01-21 19:32:51 +00:00
Ariff Abdullah
a580b31a54 Welcome to Once-a-year Sound Mega-Commit. Enjoy numerous updates and fixes
in every sense.

General
-------

- Multichannel safe, endian safe, format safe
   * Large part of critical pcm filters such as vchan.c, feeder_rate.c,
     feeder_volume.c, feeder_fmt.c and feeder.c has been rewritten so that
     using them does not cause the pcm data to be converted to 16bit little
     endian.
   * Macrosses for accessing pcm data safely are defined within sound.h in
     the form of PCM_READ_* / PCM_WRITE_*
   * Currently, most of them are probably limited for mono/stereo handling,
     but the future addition of true multichannel will be much easier.

- Low latency operation
  * Well, this require lot more works to do not just within sound driver,
    but we're heading towards right direction. Buffer/block sizing within
    channel.c is rewritten to calculate precise allocation for various
    combination of sample/data/rate size. As a result, applying correct
    SNDCTL_DSP_POLICY value will achive expected latency behaviour simmilar
    to what commercial 4front driver do.
  * Signal handling fix. ctrl+c of "cat /dev/zero > /dev/dsp" does not
    result long delay.
  * Eliminate sound truncation if the sound data is too small.
    DIY:
      1) Download / extract
         http://people.freebsd.org/~ariff/lowlatency/shortfiles.tar.gz
      2) Do a comparison between "cat state*.au > /dev/dsp" and
         "for x in state*.au ; do cat $x > /dev/dsp ; done"
         - there should be no "perceivable" differences.
    Double close for PR kern/31445.

  CAVEAT: Low latency come with (unbearable) price especially for poorly
          written applications. Applications that trying to act smarter
	  by requesting (wrong) blocksize/blockcount will suffer the most.
	  Fixup samples/patches can be found at:
	  http://people.freebsd.org/~ariff/ports/

- Switch minimum/maximum sampling rate limit to "1" and "2016000" (48k * 42)
  due to closer compatibility with 4front driver.
  Discussed with: marcus@ (long time ago?)

- All driver specific sysctls in the form of "hw.snd.pcm%d.*" have been
  moved to their own dev sysctl nodes, notably:
  hw.snd.pcm%d.vchans -> dev.pcm.%d.vchans
  Bump __FreeBSD_version.

Driver specific
---------------

- Ditto for sysctls.

- snd_atiixp, snd_es137x, snd_via8233, snd_hda
  * Numerous cleanups and fixes.
  * _EXPERIMENTAL_ polling mode support using simple callout_* mechanisme.
   This was intended for pure debugging and latency measurement, but proven
   good enough in few unexpected and rare cases (such as problematic shared
   IRQ with GIANT devices - USB). Polling can be enabled/disabled through
   dev.pcm.0.polling. Disabled by default.

- snd_ich
  * Fix possible overflow during speed calibration. Delay final
    initialization (pcm_setstatus) after calibration finished.
    PR: kern/100169
    Tested by: Kevin Overman <oberman@es.net>
  * Inverted EAPD for few Nec VersaPro.
    PR: kern/104715
    Submitted by: KAWATA Masahiko <kawata@mta.biglobe.ne.jp>

Thanks to various people, notably Joel Dahl, Yuriy Tsibizov, Kevin Oberman,
those at #freebsd-azalia @ freenode and others for testing.

Joel Dahl will do the manpage update.
2006-11-26 12:24:06 +00:00
Alexander Leidinger
851a904af5 - Rename hw.snd.unit to hw.snd.default_unit to make the purpose more obvious.
- Enable 4 automatic vchan's by default.
- Add some comments which provide ides/questions for improvement.
- Prefix some temporary sysctl's with an underscore to denote that it is not
  an official API but a workaround until the real solution is implemented.
2006-06-18 14:14:41 +00:00
Ariff Abdullah
8c437e077b Joyport blacklist. Either we're facing with broken hardware
or because this hardware need special (unknown) initialization
procedures.

Reported by:	[1] Rob Clark <vx2 at tds.net>
MFC after:	3 days

[1] http://lists.freebsd.org/pipermail/freebsd-multimedia/2006-January/003535.html
2006-01-13 04:54:34 +00:00
Ariff Abdullah
0ae68fd446 Use both (enabled by default) DAC1 and DAC2 to provide 2
distinct hardware playback channels. DAC configuration can be
accessed through kernel hint - hint.pcm.<unit>.dac="val" with
following possible values:

   0 = Enable both DACs (default)
   1 = Enable single DAC (DAC1)
   2 = Enable single DAC (DAC2)
   3 = Enable both DACs, swap position (DAC2 comes first instead
       of DAC1)

Special case for ES1370:
   Unlike ES1371,2,3/CT5880, volume for each DAC 1 and 2 can be
   controlled indepedently (synth for DAC1, pcm for DAC2). It is
   possible that user will confuse by this behaviour, since both
   DACs are enabled by default. Thus, provide a knob through sysctl
   hw.snd.pcm<unit>.single_pcm_mixer:
     0 = each DACs will be controlled separately (synth/pcm).
     1 = combine both DACs volume mixer controller into a single
         "pcm" (default)
   As a side note, fixed rate operation (provided by previous
   commit) is not a mandatory if the configuration space does not
   involve DAC2 (perhaps disabled by user through the above kernel
   hint). Unlike DAC2, DAC1 has its own register / control space,
   not affected by the speed settings of ADC.

Tested by:	multimedia@
Approved by:	netchild (mentor)
2005-11-14 18:17:31 +00:00
Alexander Leidinger
34ac5f0f5f * Fixed rate operation for es1370 chip to solve conflicting
sampling rate between playback and recording. This can be
  disabled / enabled via kernel hints
  (hint.pcm.<unit>.fixed_rate=0/4000-48000) or sysctl
  hw.snd.pcm<unit>.fixed_rate=0/4000-48000). Default to 48khz
  fixed rate. [1]
* Basic cleanup. *_es1371x_* -> *_es137x_*.
* Some locking fixes. [2]

Submitted by:	Ariff Abdullah <skywizard@MyBSD.org.my>
Discussed with:	yongari [2]
See also:	http://lists.freebsd.org/pipermail/freebsd-multimedia/2005-September/002758.html [1]
Reported by:	Jos Backus <jos at catnook.com> [1]
2005-10-02 15:56:36 +00:00
Alexander Leidinger
ae93e580dd * Register programming error during device initialization
especially for CT4730 / EV1938 chip, causing misconfigured mixer
  (David Xu), crippled after power cycle (Kevin Oberman). Fixed.
* Incorporate locking/spdif patches from Jon Noack / matk. Not all
  es137x can really do spdif, clean it up a bit to only let few capable
  chip. This adds a "hw.snd.pcm<unit>.spdif_enabled" sysctl until
  a more generic way of handling this from userland (by an ordinary
  user) is designed/implemented.
* Convert all bus_space_(read|write) to use es_rd/es_wr, simmilar
  with other drivers.
* Add tunable hw.snd.pcm<unit>.latency_timer sysctl to toggle pci
  latency timer value on the fly. Much noise / pop / crackling
  issues can be solved by increasing its value. Other people have
  pointed out to use pciconf instead, but this is just an added
  value specific for CT4730/EV1938.
* Remove es137x specific debug sysctl/code.

Several PRs can now be closed.

Submitted by:	Ariff Abdullah <skywizard@MyBSD.org.my>
Submitted by:	Jon Noack <noackjr@alumni.rice.edu> (implicit)
Submitted by:	matk (implicit)
PR:		59349, 68594, 73498
Tested by:	multimedia@
2005-07-31 13:19:38 +00:00
Matthew N. Dodd
8f6a80b791 Make it clear that the statement following the conditional is a NOP. 2005-04-13 06:42:43 +00:00
Warner Losh
d2b677bb1a Use BUS_PROBE_DEFAULT in preference to 0 and BUS_PROBE_LOW_PRIORITY in
preference to some random negative number to allow other drivers a
bite at the apple.
2005-03-01 08:58:06 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Pyun YongHyeon
eba1cb6e3e Audio drivers failed to detect failure condition and attempted to
assign DMA address to the wrong address. It can cause system lockup
or other mysterious errors. Since most sound cards requires low DMA
address(BUS_SPACE_MAXADDR_24BIT) sndbuf_alloc() would fail when the
audio driver is loaded after long running of operations.

Approved by:	jake (mentor)
Reviewed by:	truckman, matk
2004-10-13 05:45:16 +00:00
Seigo Tanimura
0739ea1de2 Rename the sound device drivers:
- `sound'
  The generic sound driver, always required.

- `snd_*'
  Device-dependent drivers, named after the sound module names.
  Configure accordingly to your hardware.

In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.

Suggested by:	cg
2004-07-16 04:00:08 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Mathew Kanner
0d8ed52ea5 Augment /dev/sndstat with the module names, if applicable.
Approved by:	  tanimura (mentor)
2004-03-06 15:52:42 +00:00
Cameron Grant
3f22597838 update my email address. 2003-09-07 16:28:03 +00:00
John Baldwin
e27951b29c Use PCIR_BAR(x) instead of PCIR_MAPS.
Glanced over by:	imp, gibbs
Tested by:		i386 LINT
2003-09-02 17:30:40 +00:00
Orion Hodson
99e082c84d Add Creative SB AudioPCI CT4730 rev A.
Submitted by:	David Xu <davidxu@FreeBSD.org>
PR:		kern/54810
2003-08-29 03:27:26 +00:00
Warner Losh
90cf0136c4 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:08:17 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Olivier Houchard
38cc994207 Implement a "sndbuf_getbufaddr" function and use it instead of vtophys().
Reviewed by:	orion
2003-02-20 17:31:12 +00:00
Cameron Grant
9dbee70d4a recognise ct5880-e
Submitted by:	SONODA Yoshihide <yshd@na.rim.or.jp>
2002-04-28 22:38:23 +00:00
Ollivier Robert
a8851d32b1 Remove a spurious warning as x is always initialised before use.
es137x.c: In function `es1371_rdcd':
es137x.c:598: warning: `x' might be used uninitialized in this function

PR:		kern/35408
Submitted by:	Thomas Quinot <thomas@cuivre.fr.eu.org>
2002-04-15 14:43:23 +00:00
Cameron Grant
39dbd126c7 use pcm_getbuffersize() 2001-10-08 05:59:54 +00:00
Cameron Grant
67b1dce3bc many changes:
* add new channels to the end of the list so channels used in order of
addition

* de-globalise definition of struct snddev_info and provide accessor
functions where necessary.

* move the $FreeBSD$ tag in each .c file into a macro and allow the
/dev/sndstat handler to display these when set to maximum verbosity to aid
debugging.

* allow each device to register its own sndstat handler to reduce the amount
of groping sndstat must do in foreign structs.
2001-08-23 11:30:52 +00:00
George C A Reid
733a4ea771 Use the M_ZERO flag to malloc(9)
Reviewed by:	cg
MFC after:	1 week
2001-06-21 19:45:59 +00:00
Cameron Grant
d95502a838 use a global devclass for all drivers - i'm not entirely sure why this
worked before.

mixer, dsp and sndstat are seperate devices - give them their own cdevsws
instead of demuxing requests sent to a single cdevsw.

use the si_drv1/si_drv2 fields in dev_t structures for holding information
specific to an open instance of mixer/dsp.

nuke /dev/{dsp,dspW,audio}[0-9]* links - this functionality is now provided
using cloning.

various locking fixes.
2001-06-16 21:25:10 +00:00
Cameron Grant
94faf89997 identify es1371 revision a 2001-06-11 00:32:18 +00:00
Cameron Grant
680307ae14 be more specific in identifying the chip type 2001-04-27 22:26:36 +00:00
George C A Reid
46ae634c56 Add yet another chip revision of the ES1371 which requires initialisation
delays

PR:		26415
Submitted by:	Jose M. Alcaide <jose@we.lc.ehu.es>
Reviewed by:	cg
2001-04-08 00:07:53 +00:00
Cameron Grant
66ef8af5b0 mega-commit.
this introduces a new buffering mechanism which results in dramatic
simplification of the channel manager.

as several structures have changed, we take the opportunity to move their
definitions into the source files where they are used, make them private and
de-typedef them.

the sound drivers are updated to use snd_setup_intr instead of
bus_setup_intr, and to comply with the de-typedefed structures.

the ac97, mixer and channel layers have been updated with finegrained
locking, as have some drivers- not all though.  the rest will follow soon.
2001-03-24 23:10:29 +00:00
Cameron Grant
c78683be1f when writing to one of the setup registers, a 32-bit write is required.
this apparently fixes problems initialising certain es1371/es1373/ct5880
revisions.

Confirmed working by: Richard J Kuhns <rjk@grauel.com>
PR:		i386/25944
2001-03-24 20:36:59 +00:00
Yoshihiro Takahashi
38bc72e431 Don't assume bus_space_handle_t == the start address of resource.
Use rman_get_start() instead.
2001-02-16 13:29:41 +00:00
Cameron Grant
2707da0758 fix certain cards failing to attach
Submitted by:	Russell Cattelan <cattelan@thebarn.com>
2001-01-24 01:27:31 +00:00
Cameron Grant
ac083c91f8 implement setblocksize properly 2000-12-23 22:24:43 +00:00
Cameron Grant
e246070f8a kill a warning 2000-12-23 05:19:32 +00:00
Cameron Grant
350a5fafb1 update code dealing with snd_dbuf objects to do so using a functional interface
modify chn_setblocksize() to pick a default soft-blocksize appropriate to the
sample rate and format in use.  it will aim for a power of two size small
enough to generate block sizes of at most 20ms.  it will also set the
hard-blocksize taking into account rate/format conversions in use.

update drivers to implement setblocksize  correctly:
updated, tested: 	sb16, emu10k1, maestro, solo
updated, untested: 	ad1816, ess, mss, sb8, csa
not updated: 		ds1, es137x, fm801, neomagic, t4dwave, via82c686

i lack hardware to test: ad1816, csa, fm801, neomagic
others will be updated/tested in the next few days.
2000-12-23 03:16:13 +00:00