Commit Graph

1308 Commits

Author SHA1 Message Date
Olivier Houchard
04f86cb130 Oops, wasn't supposed to commit this. 2011-02-13 20:04:29 +00:00
Olivier Houchard
e9e1639ac0 Call init_param1() much earlier, so that msgbufsize is non-zero when we want
to map and use the msgbuf.
2011-02-13 20:02:46 +00:00
John Baldwin
d7899b19f5 Whitespace tweak. 2011-02-09 14:37:33 +00:00
Marcel Moolenaar
078b894c69 In arm_get_next_irq(), use the last IRQ argument in order to prevent
a hard hang due to an interrupt storm or stuck interrupt pin. We
return the next IRQ that is larger than the last one returned and
in doing so give all interrupts a fair chance of being handled.
Consequently, we're able to break into the kernel debugger in such
an event.
2011-02-08 01:49:30 +00:00
Marcel Moolenaar
292e1140d1 o Make sure to mask off timer1 interrupts. It's not necessarily
masked-off by the firmware.
o   In DELAY(). Make sure we have an inner-loop body that the compiler
    cannot eliminate. While timing does not have to be perfect, the
    loops must be there to have at least some notion of delay.

Obtained from: Juniper Networks
2011-02-08 01:43:45 +00:00
Marcel Moolenaar
0d838e9ed0 Remove use_high from the softc and simply check the number of GPIO
pins to determine whether there's a high register set or not. This
allows platform_gpio_init() to work without duplicating the work
done in the attach method.
2011-02-07 05:36:32 +00:00
Bernd Walter
57abf9f47b unbreak mutlicast hash creation for the second time.
at91_emac hardware is *not* using ether_crc32_be algorithm!
2011-02-07 01:13:57 +00:00
Warner Losh
49a4353505 phys_addr is a PA not a VA so declare it as a vm_paddr_t not a vm_offset_t. 2011-02-05 03:36:34 +00:00
Warner Losh
ae5b8077df Make md_tp a register_t not a void *. This will keep us from
accidentally dereferencng it and might be one fewer things to change
if arm64 happens...

Submitted by:	rwatson's question on irc...
2011-02-05 03:30:29 +00:00
Marcel Moolenaar
1b96faf8fa The FDT describes the host controller directly. There's no need to
get properties from the parent. The parent is in fact the FDT bus
itself and will therefore not have the properties we're looking
for.

Sponsored by: Juniper Networks
2011-02-03 18:07:05 +00:00
Marcel Moolenaar
2ebeb44fc4 Accept r1 as having the metadata pointer argument if r0 is 0.
This provides backward compatibility with Juniper loaders.

Sponsored by: Juniper Networks
2011-02-03 17:35:16 +00:00
Matthew D Fleming
08b163fa51 Put the general logic for being a CPU hog into a new function
should_yield().  Use this in various places.  Encapsulate the common
case of check-and-yield into a new function maybe_yield().

Change several checks for a magic number of iterations to use
should_yield() instead.

MFC after:	1 week
2011-02-02 16:35:10 +00:00
Marcel Moolenaar
2af3fc178e Introduce macro FDT_MAP_IRQ to map from an interrupt controller and
interrupt pin pair to a global IRQ number. When multiple PICs exist
on a board, the interrupt pin alone is not unique.
2011-01-29 20:25:20 +00:00
Andrew Turner
c08ce26e98 Move the load address of the kernel to the start of KVA as the
s3c24x0 copy of initarm expects the kernel to be loaded there.

Approved by:	imp (mentor)
2011-01-29 00:46:11 +00:00
Marcel Moolenaar
b2b953afee Fix r217688. We need to call init_param1() before we use msgbufsize,
now that the size of the message buffer is a tunable.
2011-01-22 01:31:59 +00:00
Marcel Moolenaar
4cdbe2b967 Fix backtraces by defining ksym_start & ksym_end if DDB is
defined. The kernel linker doesn't deal with symbols of
type NOTYPE and typically gives the wrong symbol ($a) for
local symbols.

Obtained from:  Juniper Networks, Inc.
2011-01-22 00:32:12 +00:00
Sergey Kandaurov
4053b05b91 Make MSGBUF_SIZE kernel option a loader tunable kern.msgbufsize.
Submitted by:	perryh pluto.rain.com (previous version)
Reviewed by:	jhb
Approved by:	kib (mentor)
Tested by:	universe
2011-01-21 10:26:26 +00:00
Konstantin Belousov
55aabb7fd1 For architectures not using direct map , and requiring real KVA page for
sf buf allocation, use wakeup() instead of wakeup_one() to notify sf
buffer waiters about free buffer.

sf_buf_alloc() calls msleep(PCATCH) when SFB_CATCH flag was given,
and for simultaneous wakeup and signal delivery, msleep() returns
EINTR/ERESTART despite the thread was selected for wakeup_one(). As
result, we loose a wakeup, and some other waiter will not be woken up.

Reported and tested by:	az
Reviewed by:	alc, jhb
MFC after:	1 week
2011-01-18 21:57:02 +00:00
Jung-uk Kim
bc35e60ec0 Remove empty dev_mem_md_init() stubs. 2011-01-17 23:06:47 +00:00
Jung-uk Kim
2fea643112 Add reader/writer lock around mem_range_attr_get() and mem_range_attr_set().
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init().  Consistently define mem_range_softc from
mem.c for all platforms.  Add missing #include guards for machine/memdev.h
and sys/memrange.h.  Clean up some nearby style(9) nits.

MFC after:	1 month
2011-01-17 22:58:28 +00:00
Marcel Moolenaar
6949dd5cc2 Don't re-use MODINFOMD_BOOTINFO as MODINFOMD_DTBP. It breaks
compatibility without any means for the kernel to work with
an older loader.
2011-01-11 22:07:39 +00:00
John Baldwin
58ccf5b41c Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by:	bde
2011-01-11 13:59:06 +00:00
Konstantin Belousov
50a57dfbec Move repeated MAXSLP definition from machine/vmparam.h to sys/vmmeter.h.
Update the outdated comments describing MAXSLP and the process
selection algorithm for swap out.

Comments wording and reviewed by:	alc
2011-01-09 12:50:44 +00:00
Tijl Coosemans
a56e818f29 On mixed 32/64 bit architectures (mips, powerpc) use __LP64__ rather than
architecture macros (__mips_n64, __powerpc64__) when 64 bit types (and
corresponding macros) are different from 32 bit. [1]

Correct the type of INT64_MIN, INT64_MAX and UINT64_MAX.

Define (U)INTMAX_C as an alias for (U)INT64_C matching the type definition
for (u)intmax_t. Do this on all architectures for consistency.

Suggested by:	bde [1]
Approved by:	kib (mentor)
2011-01-08 12:43:05 +00:00
Tijl Coosemans
d942996baf On 32 bit architectures define (u)int64_t as (unsigned) long long instead
of (unsigned) int __attribute__((__mode__(__DI__))). This aligns better
with macros such as (U)INT64_C, (U)INT64_MAX, etc. which assume (u)int64_t
has type (unsigned) long long.

The mode attribute was used because long long wasn't standardised until
C99. Nowadays compilers should support long long and use of the mode
attribute is discouraged according to GCC Internals documentation.

The type definition has to be marked with __extension__ to support
compilation with "-std=c89 -pedantic".

Discussed with:	bde
Approved by:	kib (mentor)
2011-01-08 11:47:55 +00:00
Tijl Coosemans
9858863cd4 Fix types of some values in machine/_limits.h.
On some architectures UCHAR_MAX and USHRT_MAX had type unsigned int.
However, lacking integer suffixes for types smaller than int, their type
should correspond to that of an object of type unsigned char (or short)
when used in an expression with objects of type int. In that case unsigned
char (short) are promoted to int (i.e. signed) so the type of UCHAR_MAX and
USHRT_MAX should also be int.

Where MIN/MAX constants implicitly have the correct type the suffix has
been removed.

While here, correct some comments.

Reviewed by:	bde
Approved by:	kib (mentor)
2011-01-08 11:13:34 +00:00
Tijl Coosemans
911127a0d6 Remove unused support for 64 bit long on 32 bit architectures.
It was used mainly to discover and fix some 64-bit portability problems
before 64-bit arches were widely available.

Discussed with:	bde
Approved by:	kib (mentor)
2011-01-07 22:57:31 +00:00
Konstantin Belousov
39198f15ee Add AT_STACKPROT elf aux vector. Will be used to inform rtld about the
initial stack protection set by the kernel image activator.
2011-01-07 14:22:34 +00:00
John Baldwin
c305730dc0 Remove bogus usage of INTR_FAST. "Fast" interrupts are now indicated by
registering a filter handler rather than a threaded handler.  Also remove
a bogus use of INTR_MPSAFE for a filter.
2011-01-06 21:08:06 +00:00
John Baldwin
31e55059be - Add a proper return value to mv_gpio_intr().
- Remove an obsolete use of INTR_FAST.
2011-01-06 21:03:55 +00:00
John Baldwin
e9dc47ee81 - Use macbstart_locked() directly instead of deferring it to a task.
- Expand locking scope in interrupt handler.
- Flesh out the detach routine.

Reviewed by:	cognet
2011-01-06 19:32:00 +00:00
Warner Losh
fb1f3084ea Remove support for SKYEYE simulator 2011-01-05 23:45:07 +00:00
Warner Losh
79f4804918 Remove ancient simulation code. Skyeye simulation never really worked
quite right and hasn't been used in ages and is likely broken.  QEMU
with GUMSTIX is a more promising road to FreeBSD/arm in emulation
anyway.

Reviewed by:	cognet@
2011-01-05 22:15:57 +00:00
Warner Losh
72497ecf7e IXP4XX_GPIO_{,UN}LOCK() don't take args. Remove the sc here to make
this compile again.
2010-12-23 19:28:50 +00:00
Kevin Lo
7df9d5acad Fix double ;; 2010-12-06 10:24:06 +00:00
Rebecca Cran
c90f7d9b44 Revert r216134. This checkin broke platforms where bus_space are macros:
they need to be a single statement, and do { } while (0) doesn't work in this
situation so revert until a solution can be devised.
2010-12-03 07:09:23 +00:00
Rebecca Cran
15b4888a24 Disallow passing in a count of zero bytes to the bus_space(9) functions.
Passing a count of zero on i386 and amd64 for [I386|AMD64]_BUS_SPACE_MEM
causes a crash/hang since the 'loop' instruction decrements the counter
before checking if it's zero.

PR:	kern/80980
Discussed with:	jhb
2010-12-02 22:19:30 +00:00
Andrew Thompson
a0ba8fd51c Provide a mutex around the read/modify/write of the IXP425_GPIO_*
registers. Giant was used in some places, but not all.
2010-11-14 20:41:22 +00:00
Andrew Thompson
54873b4cd6 Add a GPIO driver for the Gateworks Cambria platform.
The external gpio pins are connected to a PLD on the i2c bus, unfortunatley
this device does not conform by failing to send an ack after each byte written.
The iicbb driver will abort the transfer when the address is not ack'd and it
would introduce a lot of churn to be able to pass a flag down to
iicbb_start/iicbb_write. Instead we do bad things by grabbing the iicbus but
then doing our own bit banging.
2010-11-11 20:18:33 +00:00
Bernd Walter
bfb8239854 add hint for at45d flash device sitting of spibus0 2010-11-11 15:02:14 +00:00
John Baldwin
961135ead8 - Remove <machine/mutex.h>. Most of the headers were empty, and the
contents of the ones that were not empty were stale and unused.
- Now that <machine/mutex.h> no longer exists, there is no need to allow it
  to override various helper macros in <sys/mutex.h>.
- Rename various helper macros for low-level operations on mutexes to live
  in the _mtx_* or __mtx_* namespaces.  While here, change the names to more
  closely match the real API functions they are backing.
- Drop support for including <sys/mutex.h> in assembly source files.

Suggested by:	bde (1, 2)
2010-11-09 20:46:41 +00:00
Rebecca Cran
b1ce21c6ef Fix typos.
PR:	bin/148894
Submitted by:	olgeni
2010-11-09 10:59:09 +00:00
Kevin Lo
d6cb4126e3 Minor cosmetic changes 2010-11-09 09:34:21 +00:00
Kevin Lo
036227ca55 Intel IXP425 SoC is based on the ARMv5TE architecture
MFC after:	3 days
2010-11-08 07:54:24 +00:00
Andrew Thompson
0b773cbb23 Remove line for the uncommitted Cambria gpio drive that snuck in with r214946. 2010-11-07 20:38:14 +00:00
Andrew Thompson
cefd33c787 Hook up the five gpio pins on the Avila board to the gpio framework. There are
actually 16 I/O lines but the other ones are used for system devices and
interrupts.

The IXP4XX platform can set interrupts on these pins for
high/low/rising/falling/transitional but this is not implemented yet.

The Cambria has the same interface but as all the pins are assigned to system
functions the gpio header is toggled via a PLD on the i2c bus and is not
supported by this commit.
2010-11-07 20:33:39 +00:00
John Baldwin
0108cce0a4 Adjust the order of operations in spinlock_enter() and spinlock_exit() to
work properly with single-stepping in a kernel debugger.  Specifically,
these routines have always disabled interrupts before increasing the nesting
count and restored the prior state of interrupts after decreasing the nesting
count to avoid problems with a nested interrupt not disabling interrupts
when acquiring a spin lock.  However, trap interrupts for single-stepping
can still occur even when interrupts are disabled.  Now the saved state of
interrupts is not saved in the thread until after interrupts have been
disabled and the nesting count has been increased.  Similarly, the saved
state from the thread cannot be read once the nesting count has been
decreased to zero.  To fix this, use temporary variables to store interrupt
state and shuffle it between the thread's MD area and the appropriate
registers.

In cooperation with:	bde
MFC after:     1 month
2010-11-05 13:42:58 +00:00
Olivier Houchard
306cc0acfb Try to be a little smart at guessing where _start is located in flash, instead
of relying on a binutils bug.

Reported by:	dim
2010-11-01 21:04:23 +00:00
Alexander Motin
bda55b6adb Set of legacy mode SATA enchancements:
- Implement proper combined mode decoding for Intel controllers to properly
identify SATA and PATA channels and associate ATA channels with SATA ports.
This fixes wrong reporting and in some cases hard resets to wrong SATA ports.
- Improve SATA registers support to handle hot-plug events and potentially
interface errors. For ICH5/6300ESB chipsets these registers accessible via
PCI config space. For later ones they may be accessible via PCI BAR(5).
- For controllers not generating interrupts on hot-plug events, implement
periodic status polling. Use it to detect hot-plug on Intel and VIA
controllers. Same probably could also be used for Serverworks and SIS.
2010-10-18 11:30:13 +00:00
Marius Strobl
b56f1ea9d4 Remove a device_printf() accidentally left in r213894.
Submitted by:	jhb
2010-10-15 15:16:36 +00:00