segments are lost for the application. This broke, for example,
ports/benchmarks/dbs which needs the SYN segment to filter the
contents of the trace buffer for the connection it is interested in.
This patch makes the SYN segments available again. Unfortunately they
are now associated with the listening socket instead of the new one, so
a change to applications is required, but without this patch it wouldn't
work altogether.
PR: kern/45966
code has rotten a bit so that the header length is not correct at
the point when tcp_trace is called. Temporarily compute the correct
value before the call and restore the old value after. This makes
ports/benchmarks/dbs to almost work.
This is a NOP unless you compile with TCPDEBUG.
in tcp_input that leave the function before hitting the tcp_trace
function call for the TCPDEBUG option. This has made TCPDEBUG mostly
useless (and tools like ports/benchmarks/dbs not working). Add
tcp_trace calls to the return paths that could be identified in this
maze.
This is a NOP unless you compile with TCPDEBUG.
file descriptors that are used for input and output. That allows
one, for example, to use nghook to bi-directionally pipe the
input and output into/from another non-netgraph-aware program.
of data from benchmarks etc. Implements "Student's t" for various
confidence levels, defaults to 95%.
If your benchmarks are not significant at the 95% confidence level,
we don't want to hear about it.
have execute permissions. Run "perl verify" instead. Replace all
occurences of the hardcoding of ./verify with $(VERIFY) to allow
it to be overridden as well.
in user space or kernel space. VM_MIN_KERNEL_ADDRESS starts after the
gateway page, which means that improper memory accesses to the gateway
page while in user mode would panic the kernel. Use VM_MAX_ADDRESS
instead. It ends before the gateway page. The difference between
VM_MIN_KERNEL_ADDRESS and VM_MAX_ADDRESS is exactly the gateway page.
move to ar.rsc. The RSE must be in enforced lazy mode when writing
to RSE modifyable registers. In this case we restore the RSE NaT
collection register ar.rnat. I have seen 2 general exception faults
on pluto1 now that indicate that the move to ar.rsc has already
happened prior to the move to ar.rnat, meaning that the RSE is not
in enforced lazy mode anymore. The ia64 dependency and instruction
ordering rules seem to allow having both registers written to in
the same instruction group, provided ar.rsc is written to later than
ar.rnat (based on the ordering semantics). It appears that we may
be pushing our luck. For now, put them in seperate cycles (by means
of the instruction group break). If we ever get a general exception
fault on the move to ar.rnat again, we have definite proof that
something else is fishy.
one internal device. Don't call the startup procedure again if
we already use start.
Support a manually started dhclient and keep its configured
interfaces after pccard removal.
Make pccard_ether working in single-user mode without /usr mounted.
masks for files and directories. This should make some
of the Midnight Commander users happy.
Remove an extra ')' in the manual page.
PR: 35699
Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru> (original version)
Tested by: simon
cpu_switch() where both the old and new threads are passed in as
arguments. Only powerpc uses the old conventions now.
- Update comments in the Alpha swtch.s to reflect KSE changes.
Tested by: obrien, marcel
stuff. This utility allows inspection of the ATM characteristics,
the PHY layer, including statistics of both, the retrival of the
list of currently open channels and also allows access to utopia(4).
new ATMIOCOPENVCC/CLOSEVCC. This allows us to not only use UBR channels
for IP over ATM, but also CBR, VBR and ABR. Change the format of the
link layer address to specify the channel characteristics. The old
format is still supported and opens UBR channels.
integer value and then to construct the integer from it. This buffer
was sizeof(int) bytes long, which was fine until the (undocumented) 'g'
modifier for 8-byte integers was introduced. Change this to sizeof(uint64_t).
found only many tv-cards.
We currently use more ore less evil hacks (slow_msp_audio sysctl) to
configure the various variants of these chips in order to have
stereo autodetection work. Nevertheless, this doesn't always work
even though it _should_, according to the specs.
This is, for example, the case for some popular Hauppauge models sold
sold in Germany.
However, the Linux driver always worked for me and others. Looking at
the sourcecode you will find that the linux-driver uses a very much
enhanced approach to program the various msp34xx chipset variants,
which is also found in the specs for these chips.
This is a port of the Linux MSP34xx code, written by Gerd Knorr
<kraxel@bytesex.org>, who agreed to re-release his code under a
BSD license for this port.
A new config option "BKTR_NEW_MSP34XX_DRIVER" is added, which is required
to enable the new driver. Otherwise the old code is used.
The msp34xx.c file is diff-reduced to the linux-driver to make later
modifications easier, thus it doesn't follow style(9) in most cases.
Approved by: roger (committing this, no time to test/review),
keichii (code review)
o Differentiate between CPU family and CPU model. There are multiple
Itanium 2 models and it's nice to differentiate between them.
o Seperately export the CPU family and CPU model with sysctl.
o Merced is the only model in the Itanium family.
o Add Madison to the Itanium 2 family. We already knew about McKinley.
o Print the CPU family between parenthesis, like we do with the i386
CPU class.
My prototype now identifies itself as:
CPU: Merced (800.03-Mhz Itanium)
pluto1 and pluto2 will eventually identify themselves as:
CPU: McKinley (900.00-Mhz Itanium 2)
These are 10/100 only NICs found on the IBM Thinkpad R40E and
G40. These seem to be based on the BCM5705 MAC but with a PHY
that doesn't support 1000Mbps modes.
Submitted by: Igor Sviridov <sia@nest.org>
