To support -DNO_ROOT work. The top-level installworld target creates a
new METALOG starting with `#mtree 2.0` so it needs to be first, to avoid
overwriting installkernel METALOG entries.
Reviewed by: gjb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29582
Older G4 and G3 models have a programmer's switch that can be used to
generate an interrupt to drop into the debugger.
This code hadn't been tested for a long time. It had been broken back
in 2005 in r153050.
Repair and modernize the code and add it to GENERIC.
Reviewed by: jhibbits (approved w/ removal of unused sc_dev var)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D29131
If the root file system is composed from multiple devices, wait for
devices to be ready before running zpool and dumpon rc scripts.
An example of this is if the bulk of the root file system exists on a
fast device (e.g. NVMe) but the /var directory comes from a ZFS dataset
on a slower device (e.g. SATA). In this case, it is possible that the
zpool import may run before the slower device has finished being probed,
leaving the system in an intermediate state.
Fix is to add root_hold_wait to the zpool and dumpon (which has a
similar issue) rc scripts.
PR: 242189
Reported by: osidorkin@gmail.com
Reviewed by: allanjude
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29101
This fixes a problem where ctld(8) would refuse to start on boot
with a specific IP address to listen on configured in ctl.conf(5).
It also fixes a problem where ctld(8) would fail to start with
some network interfaces which require a sysctl.conf(5) tweak
to configure them, eg to switch them from InfiniBand to IP mode.
PR: 232397
Reported By: Mahmoud Al-Qudsi <mqudsi at neosmart.net>
Submitted By: Jeremy Faulkner <gldisater at gmail.com>
Reviewed By: mav
Differential Revision: https://reviews.freebsd.org/D29578
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
Usually on boot the MPS is already configured by BIOS. But we've
found that on hot-plug it is not true at least for our Supermicro
X11 boards. As result, mismatch between root's configuration of
256 bytes and device's default of 128 bytes cause problems for some
devices, while others seem to work fine.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
These two have proven to be useful during debugging. We may as well keep
them permanently.
Others will be added as their utility becomes clear.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29555
before this change pf_route operated on the semantic that pf runs
when packets go over an interface, so when pf_route changed which
interface the packet was on it would run pf_test again. this change
changes (restores) the semantic that pf is only supposed to run
when packets go in or out of the network stack, even if route-to
is responsibly for short circuiting past the network stack.
just to be clear, for normal packets (ie, those not touched by
route-to/reply-to/dup-to), there isn't a difference between running
pf when packets enter or leave the stack, or having pf run when a
packet goes over an interface.
the main reason for this change is that running the same packet
through pf multiple times creates confusion for the state table.
by default, pf states are floating, meaning that packets are matched
to states regardless of which interface they're going over. if a
packet leaving on em0 is rerouted out em1, both traversals will end
up using the same state, which at best will make the accounting
look weird, or at worst fail some checks in the state and get
dropped.
another reason for this commit is is to make handling of the changes
that route-to makes consistent with other changes that are made to
packet. eg, when nat is applied to a packet, we don't run pf_test
again with the new addresses.
the main caveat with this diff is you can't have one rule that
pushes a packet out a different interface, and then have a rule on
that second interface that NATs the packet. i'm not convinced this
ever worked reliably or was used much anyway, so we don't think
it's a big concern.
discussed with many, with special thanks to bluhm@, sashan@ and
sthen@ for weathering most of that pain.
ok claudio@ sashan@ jmatthew@
Obtained from: OpenBSD
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29554
Commit 01ae8969a9 stopped the NFSv4.1/4.2 server from implicitly
binding the back channel to a new TCP connection so that it
conforms to RFC5661, for NFSv4.1/4.2. An effect of this
for the Linux NFS client is that it will do a
BindConnectionToSession when it sees NFSV4SEQ_CBPATHDOWN
set in a sequence reply. This will fix the back channel, but the
first attempt at a callback like CB_RECALL will already have
failed. Without this patch, a CB_RECALL will not be retried
and that can result in a 5 minute delay until the delegation
times out.
This patch modifies the code so that it will retry the
CB_RECALL every couple of seconds, often avoiding the
5 minute delay.
This is not critical for correct behaviour, but avoids
the 5 minute delay for the case where the Linux client
re-binds the back channel via BindConnectionToSession.
MFC after: 2 weeks
GNU readelf exits with an error for a number of invalid file cases.
Previously ELF Tool Chain readelf always exited with 0. Now we exit 1
upon detecting an error with one or more input files, but in any case
all of them are processed.
This should catch common failure cases. We still do not report an error
for some types of malformed ELF files, but this is consistent with GNU
readelf.
PR: 252727
Reviewed by: jkoshy, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29377
Commit 01ae8969a9 stopped the NFSv4.1/4.2 server from implicitly
binding the back channel to a new TCP connection so that it
conforms to RFC5661, for NFSv4.1/4.2. An effect of this
for the Linux NFS client is that it will do a
BindConnectionToSession when it sees NFSV4SEQ_CBPATHDOWN
set in a sequence reply. It will do this for every RPC
reply until it no longer sees the flag.
Without that patch, this will happen until the client does
an Open, which will clear LCL_CBDOWN.
This patch clears LCL_CBDOWN right away, so that
NFSV4SEQ_CBPATHDOWN will no longer be sent to the client
in Sequence replies and the Linux client will not repeat
the BindConnectionToSession RPCs.
This is not critical for correct behaviour, but reduces
RPC overheads for cases where the Open will not be done
for a while.
MFC after: 2 weeks
Follow-up to the removal of the mcov from kernel.
Noted by: mckusick
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29563
After e7a5b3bd05, the la->delay value was adjusted after
being set by the starvation_limit code block, which is wrong.
Reported By: avg
Reviewed By: avg
Fixes: e7a5b3bd05
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29513
Add a new option to pam_unix(8), "emptyok", which makes it not prompt
for password, if it's set to an empty one. It is similar to "nullok",
which makes it not prompt for password if the hash itself is empty.
Reviewed By: markj
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27569
This allows the xhci tablet device to be recognized and a PCI device
instantiated.
Reviewed by: jhb
Fixes: 621b509048 Refactor configuration management in bhyve.
MFC after: 3 months.
This was ported from illumos but not completely done. Currently we do
not perform type deduplication between KLDs and the kernel, i.e., kernel
modules have a complete type graph. So, remove it for now since it's
not functional and complicates the task of modifying various CTF type
definitions, and we are hitting some limits in the current format which
necessitate an update.
No functional change intended.
MFC after: 2 weeks
Several large data structures are allocated by fsck_ffs to track
resource usage. Most but not all were deallocated at the end of
checking each filesystem. This commit consolidates the freeing
of all data structures in one place and adds one that had previously
been missing.
It is important to clean up these data structures as they can be
large. If the previous allocations have not been freed, fsck_ffs
can run out of address space when many large filesystems are being
checked. An alternative would be to fork a new instance of fsck_ffs
for each filesystem to be checked, but we choose to free the small
set of large structures to save the fork overhead.
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 7 days
Sponsored by: Netflix
After making sbuf_drain safe for external use,
there is no need to protect the call.
MFC after: 2 weeks
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29545
While sbuf_drain was an internal function, two
KASSERTS checked the sanity of it being called.
However, an external caller may be ignorant if
there is any data to drain, or if an error has
already accumulated. Be nice and return immediately
with the accumulated error.
MFC after: 2 weeks
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29544
The reset is necessary at the beginning of the function, because of
the errno logic in the error path (set errno to EINVAL if not set).
If errno is already set when calling the function, and the function
fails, the previous errno value will be inherited.
and other equivalent ways to request mcount-based profiling, like
'profile N' in kernel config.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D29529
The VFS conventions is that VOP_LOOKUP() methods do not need to handle
ISDOTDOT lookups for VV_ROOT vnodes (since they cannot, after all). Nullfs
bypasses VOP_LOOKUP() to lower filesystem, and there, due to user actions,
it is possible to get into situation where
- upper vnode does not have VV_ROOT set
- lower vnode is root
- ISDOTDOT is requested
User just needs to nullfs-mount non-root of some filesystem, and then move
some directory under mount, out of mount, using lower filesystem.
In this case, nullfs cannot do much, but we still should and can ensure
internal kernel structures are consistent. Avoid ISDOTDOT lookup forwarding
when VV_ROOT is set on lower dvp, return somewhat arbitrary ENOENT.
PR: 253593
Reported by: Gregor Koscak <elogin41@gmail.com>
Test by: Patrick Sullivan <sulli00777@gmail.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
A lot of firmware files have a "-" in the name. That "-" is a problem
when dealing with shell variables or loader (e.g., auto-loading .ko).
It may thus often be convenient to generate firmware kernel object files
with s/-/_/g in the name. In order to automatically find them from
drivers using LinuxKPI also substitue the '-' for a '_' like we do
for '/' and '.' already.
Reviewed-by: hselasky, manu (ok)
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29514
Rename the last remaining bits depending on ifnet from linux/netdevice.h
instead of using the compat macros. This helps clearing up
struct netdevice being struct ifnet from linux/netdevice.h.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky, kib
X-D-R: D29366
Differential Revision: https://reviews.freebsd.org/D29497
Under geom(4) nvme_ns_bio_process() is on the path where sleep
is prohibited as g_io_shedule_down() calls THREAD_NO_SLEEPNG()
before geom->start().
Reviewed By: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29539
