Commit Graph

306 Commits

Author SHA1 Message Date
Gleb Smirnoff
1fb025d58a Remove layer intermixing. Device driver should pass the frame should
pass frame to ether_input(), and do not play with bridge itself.

Reviewed by:	sam, andre
Approved by:	julian (mentor)
MFC after:	1 week
2004-09-06 21:14:32 +00:00
Robert Watson
463d14faf8 Since if_ed doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:04:23 +00:00
Warner Losh
6d69b36945 It is a little better to return ENXIO from probe/match routine than EIO. 2004-07-21 20:38:12 +00:00
Warner Losh
973796c882 A couple more style(9) nits I should have included in last commit 2004-06-18 01:28:54 +00:00
Warner Losh
b3cb6e3742 Style nits in the prototypes 2004-06-18 01:27:19 +00:00
Christian Weisgerber
0e939c0cea Replace handrolled CRC calculation with ether_crc32_[lb]e(). 2004-06-09 14:34:04 +00:00
Warner Losh
2e31e339d1 Fix disordering of pccarddevs.h noticed by bde. Also remove a few
redundant includes and fix some of the include disordering.

Submitted by: bde
2004-05-27 03:49:45 +00:00
Warner Losh
dba6dd177b Move to generating pccarddevs.h on the fly, both for the kernel and
the modules.

Also generate usbdevs.h automatically now, but a non-kernel file is
stopping that at the moment.
2004-05-26 00:53:10 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Warner Losh
fbfb97942e It turns out that the module dependency on pccard is in error. Since
there's not dependencies on pccard symboles, such a dependency is not
necessary.  This means that drivers that have multiple attachments can
not drag bogus devices into the kernel at load time.

We can't (yet) do this with pci and isa.  Drivers written for them
actually do seem to have symbols that depend on these busses'
implementation code.

ndis not touched until other things can be tested.
2004-05-08 06:04:06 +00:00
David E. O'Brien
a1f60844da Fix building on L64 machines. 2004-04-16 05:34:14 +00:00
Luigi Rizzo
0318355d0e Remove improper use of if_addrhead in device drivers to check
if the link-level address has been initialized already.

The majority of modern drivers never does this and works fine, which
makes me think that the check is totally unnecessary and a residue
of cut&paste from other drivers.

This change is done to simplify locking because now almost none of the
drivers uses this field. The exceptions are "ct" "ctau" and "cx"
where i am not sure if i can remove that part.
2004-04-15 20:31:10 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
David E. O'Brien
a9653b1cc3 Adjust ed(4) for 64-bit platforms should it get newbus'ified. 2004-03-03 06:48:42 +00:00
KATO Takenori
38816a4377 Added TDK LAK-CD031 (simple NE2000 device).
Reviewed by:	imp
2003-12-31 04:25:00 +00:00
David E. O'Brien
a55a017f42 Don't use caddr_t in mchash(). Also use C99 spellings over BSD ones.
Requested by:	bde,imp
2003-12-08 07:54:15 +00:00
David E. O'Brien
4dc52c32bf Remove duplicate FBSDID's, move others to their right place. 2003-11-14 17:16:58 +00:00
David E. O'Brien
aa8255025a Try to create some sort of consistency in how the routings to find the
multicast hash are written.  There are still two distinct algorithms used,
and there actually isn't any reason each driver should have its own copy
of this function as they could all share one copy of it (if it grew an
additional argument).
2003-11-13 20:55:53 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Brooks Davis
c020a92f9f There is no way to enter the attach routine twice with the same softc
without a detach call in between so don't try to deal with that
possiability.

This is a diff-reduction commit for the upcoming if_xname conversion.
2003-10-30 19:45:58 +00:00
Takeshi Shibagaki
5141386c7b Add Allied Telesis SIC-AT boards support.
Discussed in from [FreeBSD-tech-jp 3396] to [FreeBSD-tech-jp 3407]
at FreeBSD-tech-jp@jp.freebsd.org.

NOTE: We must put ed_probe_SIC() function into if_ed_isa.c because
      this is a bus dependent code. But the ed driver code is not
      separated explicitly whether it is bus dependent or independent
      now.

Refer to: http://plaza17.mbn.or.jp/~chi/myprog/FreeBSD/sicat.html
Submitted by: chi@bd.mbn.or.jp (Chiharu Shibata)
2003-10-15 17:22:15 +00:00
Warner Losh
1bbd0d4010 EXPsys PCMCIA Ethernet Combo
Submitted by: Ludwig Pummer
2003-09-20 18:03:07 +00:00
John Baldwin
e27951b29c Use PCIR_BAR(x) instead of PCIR_MAPS.
Glanced over by:	imp, gibbs
Tested by:		i386 LINT
2003-09-02 17:30:40 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
4fbd232c86 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 05:54:52 +00:00
Warner Losh
42967c7c5f Add MELCO LPC3_CTX. This is the same as Buffalo card of the same name
with different vendor id.

Submitted by: Shizuka Kudo-san
2003-08-07 19:40:05 +00:00
John Baldwin
8b149b5131 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
Bruce Evans
aff964606a Don't use pessimal (u_short) types for i/o ports. This is mainly for
completenss.  The pessimization is tiny compared with i/o port slowness
except on very old machines, but code that used signed short types for
i/o ports was unpessimized long ago, and the macro that detected it
recently started working for u_short types too.  Use of bus space
should have made this moot long ago.

Not tested at runtime by:  bde
2003-08-06 18:06:30 +00:00
Warner Losh
373eec79d1 The LP_ETH_10_100_CF entry needs to be tagged as a DL100019.
Submitted by: Scott Renfro
2003-07-28 00:07:58 +00:00
Warner Losh
b44e6aad52 Add Socket Communications Low Power 10/100 CF Ethernet card.
Obtained from: NetBSD (information, not code)
2003-07-26 17:52:09 +00:00
Warner Losh
58a67e33be Add support for BUFFALO LPC3-CLX 10/100Base-T PC-Card
PR: 47786
Submitted by: IHA, genta -san
2003-07-19 05:36:09 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Warner Losh
cb339c7cd9 SMC 8041 is the same thing as LINKSYS COMBO_ECARD, so no extra entry
is required.  NetBSD has one because it checks for the mac address
match as well wanting to give its own string in the description.
Since we do neither, we don't need a separate entry.

# I suspect that a few of the COREGA cards might fall into that category
# as well, but since I don't have access to any of them it is hard to know
# for sure.
2003-04-10 07:35:19 +00:00
Warner Losh
843aa7b528 Add Billionton CFLT10N and SMC8041 (although I'm not 100% sure the latter is
needed).  Remove duplicate kingston kne2 entry.

Info obtained from NetBSD
2003-04-10 07:24:18 +00:00
Warner Losh
227e700639 reorganize the supported card table. We don't need the enet_vendor or
enet_mcast fields, so remove them.  Sort.  Eliminate now duplicate
entries.

This reorg saves about 500 bytes in the binary.  I've tested this only
with a couple of cards, so please let me know if I've broken anything.
2003-04-10 07:04:39 +00:00
Warner Losh
649a9521d5 Don't set the description if NULL. 2003-04-10 06:08:27 +00:00
Olivier Houchard
0a65bc0775 Fix ed compilation with PAE by using %jx instead of %x. 2003-04-05 18:12:36 +00:00
MIHIRA Sanpei Yoshiro
e0926f607f Add NE2000DVF_AX88190 flag to Corega FEther PCC-TXD
(see also /etc/defaults/pccard.conf rev.1.172)
2003-04-04 14:46:50 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Yoshihiro Takahashi
7bc5ac11b7 Fix printf format error. 2003-02-24 14:32:27 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Takeshi Shibagaki
5770575cfc Add BUFFALO LPC-CF-CLT(10Base-T Compact Flash Ether Card). 2003-01-18 02:14:23 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Warner Losh
43924d99c2 add some devices from NetBSD 2002-10-11 07:03:09 +00:00
Brooks Davis
38d8969122 Use if_printf() instead of printf() to print "ed#: blah". 2002-10-01 00:49:28 +00:00
Warner Losh
0d9ad27e7e mbuf leak in the error case has been fixed. When we have
an error, go ahead and m_freem the buffer.

PR: 32666
Submitted by: Chi-Fung Fan
2002-09-30 00:18:12 +00:00
Poul-Henning Kamp
37c841831f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning 
2002-09-28 17:15:38 +00:00