NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
enough that unification will have to wait for the next pass.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
specific, and only builds there. Likewise the module is built there. Move it to
the x86-only files.x86.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Apart from one MD file, ACPI is a x86 implementation, not specific to either
i386 or amd64, so put it into files.x86. Other architectures include fewer
files for the same options, so it can't move into the MI files file.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
VIA Padlock support is for VIA C3, C7 and Eden processors, which are 64bit x86
processors.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The HPT drivers are all x86 only. Move them to files.x86. Because of the way we
run uudecode, we can use $M instead of needing entries for them in separate
files.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Move all the identical x86 lines to files.x86. The non-identical ones should be
unified and moved as well, but that would require additional changes that would
need a more careful review and may not be MFCable, so I'll do them
separately. I'll delete the mildly snarky comment when things are unified.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The Zstd format bumps the CLOOP major number to 4 to avoid incompatibility
with older systems. Support in geom_uzip(4) is conditional on the ZSTDIO
kernel option, which is enabled in amd64 GENERIC, but not all in-tree
configurations.
mkuzip(8) was modified slightly to always initialize the nblocks + 1'th
offset in the CLOOP file format. Previously, it was only initialized in the
case where the final compressed block happened to be unaligned w.r.t.
DEV_BSIZE. The "Fake" last+1 block change in r298619 means that the final
compressed block's 'blen' was never correct unless the compressed uzip image
happened to be BSIZE-aligned. This happened in about 1 out of every 512
cases. The zlib and lzma decompressors are probably tolerant of extra trash
following the frame they were told to decode, but Zstd complains that the
input size is incorrect.
Correspondingly, geom_uzip(4) was modified slightly to avoid trashing the
nblocks + 1'th offset when it is known to be initialized to a good value.
This corrects the calculated final real cluster compressed length to match
that printed by mkuzip(8).
mkuzip(8) was refactored somewhat to reduce code duplication and increase
ease of adding other compression formats.
* Input block size validation was pulled out of individual compression
init routines into main().
* Init routines now validate a user-provided compression level or select
an algorithm-specific default, if none was provided.
* A new interface for calculating the maximal compressed size of an
incompressible input block was added for each driver. The generic code
uses it to validate against MAXPHYS as well as to allocate compression
result buffers in the generic code.
* Algorithm selection is now driven by a table lookup, to increase ease of
adding other formats in the future.
mkuzip(8) gained the ability to explicitly specify a compression level with
'-C'. The prior defaults -- 9 for zlib and 6 for lzma -- are maintained.
The new zstd default is 9, to match zlib.
Rather than select lzma or zlib with '-L' or its absense, respectively, a
new argument '-A <algorithm>' is provided to select 'zlib', 'lzma', or
'zstd'. '-L' is considered deprecated, but will probably never be removed.
All of the new features were documented in mkuzip.8; the page was also
cleaned up slightly.
Relnotes: yes
Follow-up on r322318 and r322319 and remove the deprecated modules.
Shift some now-unused kernel files into userspace utilities that incorporate
them. Remove references to removed GEOM classes in userspace utilities.
Reviewed by: imp (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21249
tcpratelimit isn't supported as there's now atomic_add_64, so add it to the exclusion list
Add comment for why PPC_PROBE_CHIPSET is on the list
Remove UKBD_DFLT_KEYMAP now that ukbd works on all platforms.
files.x86 is for the parts of the system that are common to both i386 and amd64
due too their nature. First up, to get the ball rolling, is fdc, the floppy disk
support. It works only on amd64 and i386 these days, and that's unlikely to
change.
Reviewed by: jhb, cem (earlier versrions)
Differential Revision: https://reviews.freebsd.org/D21210
Move the floppy driver to the x86 specific notes file.
Reviewed by: jhb, manu, jhibbits, emaste
Differential Revision: https://reviews.freebsd.org/D21208
x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.
All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.
Reviewed by: jhb (earlier version), manu (earlier version), jhibbits
Differential Revision: https://reviews.freebsd.org/D21233
We used the aw_clk_nm clock for clock with only one divider factor
and used a fake multiplier factor. This cannot work properly as we
end up writing the "fake" factor to the register (and so always set
the LSB to 1).
Create a new clock for those.
The reason for not using the clk_div clock is because those clocks are
a bit special. Since they are (almost) all related to video we also need
to set the parent clock (the main PLL) to a frequency that they can support.
As the main PLL have some minimal frequency that they can support we need to
be able to set the main PLL to a multiple of the desired frequency.
Let say you want to have a 71Mhz pixel clock (typical for a 1280x800 display)
and the main PLL cannot go under 192Mhz, you need to set it to 3 times the
desired frequency and set the divider to 3 on the hdmi clock.
So this also introduce the CLK_SET_ROUND_MULTIPLE flag that allow for this kind
of scenario.
It is part of -Wformat, which is enabled by -Wall. Empty format strings are
well defined and it is perfectly reasonable to expect them in a formatting
interface.
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
The exists() check guarding the invocation of ls was not working
correctly as it was expanding '$L' to determine the path of the local
modules directory. Fix by using {} around the variable name.
Inline some of the logic from bsd.subdir.mk when invoking local module
builds. This gives output in 'make buildkernel' the same as if there
was a Makefile in /usr/local/sys/modules with SUBDIR =
${LOCAL_MODULES}.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20991
- UMA_XDOMAIN enables an additional per-cpu bucket for freed memory that
was freed on a different domain from where it was allocated. This is
only used for UMA_ZONE_NUMA (first-touch) zones.
- UMA_FIRSTTOUCH sets the default UMA policy to be first-touch for all
zones. This tries to maintain locality for kernel memory.
Reviewed by: gallatin, alc, kib
Tested by: pho, gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20929
Instances of the device can be configured using hints or FDT data.
Interfaces to reconfigure the chip and extract voltage measurements from
it are available via sysctl(8).
an updated rack depend on having access to the new
ratelimit api in this commit.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D20953
In a git world this provides a facsimile of a monotonically increasing
version number. This might be refined further, but this provides a
starting point for investigation.
Reviewed by: cem
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20462
with an eventual goal to convert all legacl zlib callers to the new zlib
version:
* Move generic zlib shims that are not specific to zlib 1.0.4 to
sys/dev/zlib.
* Connect new zlib (1.2.11) to the zlib kernel module, currently built
with Z_SOLO.
* Prefix the legacy zlib (1.0.4) with 'zlib104_' namespace.
* Convert sys/opencrypto/cryptodeflate.c to use new zlib.
* Remove bundled zlib 1.2.3 from ZFS and adapt it to new zlib and make
it depend on the zlib module.
* Fix Z_SOLO build of new zlib.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp>
Reviewed by: markm (sys/dev/zlib/zlib_kmod.c)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19706
It is assembled using "${CC} -x assembler-with-cpp", which by convention
(bsd.suffixes.mk) uses the .asm extension.
This is a portion of the review referenced below (D18344). That review
also renamed linux_support.s to .S, but that is a functional change
(using the compiler's integrated assembler instead of as) and will be
revisited separately.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18344
The current implementation of gzipped a.out support was based
on a very old version of InfoZIP which ships with an ancient
modified version of zlib, and was removed from the GENERIC
kernel in 1999 when we moved to an ELF world.
PR: 205822
Reviewed by: imp, kib, emaste, Yoshihiro Ota <ota at j.email.ne.jp>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21099
Terasic DE10-Pro (an Intel Stratix 10 GX/SX FPGA Development Kit).
The Altera EMAC is an instance of Synopsys DesignWare Gigabit MAC.
This driver sets correct clock range for MDIO interface on Intel Stratix 10
platform.
This is required due to lack of support for clock manager device for
this platform that could tell us the clock frequency value for ethernet
clock domain.
Sponsored by: DARPA, AFRL
Nothing uses these anymore. They were for super small armv4 boards without
uboot. We removed armv4 support before 13.0, but neglected to garbage collect
this at the same time. Today, both flavors of armv5 kernels (mv and ralink) boot
via uboot which has its own compression scheme for boards that need it.
Note: OLDFILES has not been updated beacuse installkernel will move the whole
directory out of the way before installing the new kernel.
Differential Revision: https://reviews.freebsd.org/D21072
Summary:
It turns out statistics accounting is very expensive in the pmap driver,
and doesn't seem necessary in the common case. Make this optional
behind a MOEA64_STATS #define, which one can set if they really need
statistics.
This saves ~7-8% on buildworld time on a POWER9.
Found by bdragon.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D20903
o Add an experimental IOMMU support to xDMA framework
The BERI IOMMU device is the part of CHERI device-model project [1]. It
translates memory addresses for various BERI peripherals modelled in
software. It accepts FreeBSD/mips64 page directories format and manages
BERI TLB.
1. https://github.com/CTSRD-CHERI/device-model
Sponsored by: DARPA, AFRL
