initializing 16. Initialize all 20 so we don't send garbage in the
Auxiliary register. The SATA standard mandates a 5 dword length for
the Host to Device FIS.
Sponsored by: Netflix
announce the change on the vap's ifnet instead of the main ifnet. This
matches the behavior of other wireless drivers in the tree and allows the
default devd configuration to correctly start dhclient automatically after
an ndis wireless device associates.
MFC after: 2 weeks
optional attributes field.
- Add a 'machdep.smap' sysctl that exports the SMAP table of the running
system as an array of the ACPI 3.0 structure. (On older systems, the
attributes are given a value of zero.) Note that the sysctl only
exports the SMAP table if it is available via the metadata passed from
the loader to the kernel. If an SMAP is not available, an empty array
is returned.
- Add a format handler for the ACPI 3.0 SMAP structure to the sysctl(8)
binary to format the SMAP structures in a readable format similar to
the format found in boot messages.
MFC after: 2 weeks
* Convert ixgbe to use this ioctl
* Convert ifconfig to use generic i2c handler for "ix" interfaces.
Approved by: Eric Joyner (ixgbe part)
MFC after: 2 weeks
Sponsored by: Yandex LLC
argument but not actually defined anywhere.
This fixes the compile complaining about
"declaration of 'struct kiocb' will not be visible outside of this function".
MFC after: 2 weeks
X-MFC with: whatever changed caused the breakage ;-)
extension. Provide prototypes for the actual implementations.
Correct function arguments to match the implementations.
MFC after: 3 days
X-MFC with: r270755
and code to make the code compile.
Give the function seems to be slightly mixed with csum and tso,
make it non-fatal if we try to setup thing on a kernel without IP
support. In practise the printf on the console will probably still
make your machine unhappy.
MFC after: 3 days
X-MFC with: r270755
In general theraven is right that we should factr this out and provide
a general and per-arch implementation that everything can use.
MFC after: 3 days
X-MFC with: r270755
- use proper __FreeBSD_version check and more importantly check for __am64__
to be defined. Whether the FreeBSD(_version) checks are needed is a
different question.
- cast uint64_t to uintmax_t and use %jx for printing.
Note: there are more values that could be printed in that status function
but leave that for the future; printf doesn't seem to be the right
way to do it anyway.
Note: there is more breakage related to i40e_allocate_dma*() having
conflicting declarations, so more fixes to come.
PR: 193112
MFC after: 3 days
X-MFC with: r270755
e.g. when a global variable is initialized with a pointer to ifunc.
Add symbol type check and call resolver for STT_GNU_IFUNC symbol types
when processing non-PLT relocations, but only after non-IFUNC
relocations are done. The two-phase proceessing is required since
resolvers may reference other symbols, which must be ready to use when
resolver calls are done.
Restructure reloc_non_plt() on x86 to call find_symdef() and handle
IFUNC in single place.
For non-x86 reloc_non_plt(), check for call for IFUNC relocation and
do nothing, to avoid processing relocs twice.
PR: 193048
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
conflict with the quota metadata access. Mark quota vnode lock as
recursive and always exclusive to avoid the problem.
Reported by: hrs
Tested by: hrs, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Rename $kerberos5_server_enable with $kdc_enable and rename
rc.d/kerberos with rc.d/kdc.
- Rename $kadmin5_server_enable with $kadmind_enable.
- Rename ${kerberos5,kpasswdd}_server with ${kdc,kpasswdd}_program.
- Fix rc.d/{kadmind,kerberos,kpasswdd,kfd} scripts not to change variables
after load_rc_config().
- Add rc.d/ipropd_master and rc.d/ipropd_slave scripts. These are
for iprop-master(8) and iprop-slave(8). Keytab used for iprop service is
defined in ipropd_{master,slave}_keytab (/etc/krb5.keytab by default).
- Add dependency on rc.d/kdc to SERVERS. rc.d/kdc must be invoked as early
as possible before scripts divided by rc.d/SERVERS.
Note that changes to rc.d/{kdc,kpasswdd,kadmind} are backward-compatible
with the old configuration variables:
${kerberos5,kpasswdd,kadmin5}_server{,_enable,_flags}.
Prior to this change we triggered ARC reclaim when kmem usage passed 3/4
of the total available, as indicated by vmem_size(kmem_arena, VMEM_ALLOC).
This could lead large amounts of unused RAM e.g. on a 192GB machine with
ARC the only major RAM consumer, 40GB of RAM would remain unused.
The old method has also been seen to result in extreme RAM usage under
certain loads, causing poor performance and stalls.
We now trigger ARC reclaim when the number of free pages drops below the
value defined by the new sysctl vfs.zfs.arc_free_target, which defaults
to the value of vm.v_free_target.
Credit to Karl Denninger for the original patch on which this update was
based.
PR: 191510 and 187594
Tested by: dteske
MFC after: 1 week
Relnotes: yes
Sponsored by: Multiplay
Fix missing includes and invalid vars in ixl / ixlv driver added by r270346
which caused build failures for GENERIC kernel after it was made default
by r270755.
X-MFC-With: r270346 / r270755
Sponsored by: Multiplay
libraries that need to be linked into an executable or library have to be
listed on the command line explicitly. This commit fixes a bug in ld(1)
where it would scan dependencies of the libraries on the command line and
link them if needed if they were also found in ld.so.cache.
The important bit of the patch is the initialisation of needed.by such that
libraries found by scanning dependencies are marked as such and not used in
the link.
The patch is a backport of binutils git commit
d5c8b1f8561426b41aa5330ed60f578178fe6be2
The author gave permission to use it under GPLv2 terms.
PR: 192062
Exp-run by: antoine
MFC after: 1 week
The adist_remote_lock is not held in this place, whereas the
adist_recv_list_lock lock is and is picked up during the next iteration.
I found this by annotating our libpthread with Clang's -Wthread-safety
attributes. I will send out a patch for this in the nearby future,
because it's awesome.
MFC after: 2 weeks
Add a separate field which exports tracer pid and add a new keyword
("tracer") for ps to display it.
This is a follow up to r270444.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
but has some retries.
Without this, single frame transmission in AMPDU will always look like
it succeeded fine, and thus AMRR will think it's totally fine to just
keep upping the rate upwards.
Now, this is still not quite right! For multi-frame aggregates the
completion happens in two parts - the TX done and the BA received.
The driver is currently double accounting those a little - there's no
way to say to the rate control code "I completed X frames, Y worked fine,
there were Z retries." And it's a bit odd with iwn, as the firmware
retransmits frames for us so we don't get to see how many retransmits
happened; only that it took longer than normal. I may have to extend
the rate control API to properly track that.
So this may keep the rate lower than it should be, but that's better
than keeping it higher than it should be.
Tested:
* 5100, STA mode
in preparation for the 5300 3x3 NIC.
During this particular adventure, I did indeed discover that a whole
swath of things made little to no sense.
Those included, and are fixed here:
* A lot of the antenna configuration bits assume the NIC has two receive
chains. That's blatantly untrue for NICs that don't.
* There was some disconnect between the antenna configuration when
forming a PLCP rate DWORD (which includes the transmit antenna
configuration), separate to the link quality antenna configuration.
So now there's helper functions to return which antenna configurations
to use and those are used wherever an antenna config is required.
* The 5300 does up to three stream TX/RX (so MCS0->23), however
the link quality table has only 16 slots. This means all of the
rate entries are .. well, dual-stream rates. If this is the case,
the "last MIMO" parameter can't be 16 or it panics the firmware.
Set it to 15.
* .. and since yes it has 16 slots, it only would try retransmitting
from MCS8->MCS23, which can be quite .. terrible. Hard-code the last
two retry slots to be the lowest configured rate.
* I noticed some transmit configuration command stuff is different
based on firmware API version, so I lifted that code from Linux.
* Add / augment some more logging to make it easier to capture this
stuff.
Now, 3x3 is still terrible because the link quality configuration is
plainly not good enough. I'll have to think about that.
However, the original goal of this - 3x3 operation on the Intel
5300 NIC - actually worked.
There are also rate control bugs in the way this driver handles
notifying the net80211 rate control code when AMPDU is enabled.
It always steps the rate up to the maximum rate possible - and
this eventually ends in much sadness. I'll fix that later.
As a side note - 2GHz HT40 now works on all the NICs I have tested.
As a second side note - this exposed some bad 3x3 behaviour in
the ath(4) rate control code where it starts off at a 3-stream rate
and doesn't downgrade quickly enough. This makes the initial
dhcp exchange take a long time. I'll fix the ath(4) rate code
to start at a low fixed 1x1 MCS rate and step up if everything
works out.
Tested:
* Intel 2200
* Intel 2230
* Intel 5300
* Intel 5100
* Intel 6205
* Intel 100
TODO:
* Test the other NICs more thoroughly!
Thank you to Michael Kosarev <russiane39@gmail.com> for donating the
Intel 5300 NIC and pestering me about it since last year to try and
make it all work.
