multithreaded programs that was addressed by r329254 was in the
implementation of pmap_enter() on some architectures, notably, amd64.
kib@, markj@ and I have audited all of the pmap_enter() implementations,
and fixed the broken ones, specifically, amd64 (r335784, r335971), i386
(r336092), mips (r336248), and riscv (r336294).
To be clear, the reason to address the problem within pmap_enter() and
revert r329254 is not just a matter of principle. An effect of r329254
was that a copy-on-write fault actually entailed two page faults, not
one, even for single-threaded programs. Now, in the expected case for
either single- or multithreaded programs, we are back to a single page
fault to complete a copy-on-write operation. (In extremely rare
circumstances, a multithreaded program could suffer two page faults.)
Reviewed by: kib, markj
Tested by: truckman
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16301
Oppv2 add more flexibility on regulator value for the core voltage amongst
other new thing.
For now only shared opp table is supported as I don't have hardware with
non-shared opp table.
Tested-On: OrangePi One (with oppv1 and oppv2)
Tested-On: Pine64-LTS
In order to setup an initial environment and jump into the generic
hammer_time initialization function. Some of the code is shared with
PVHv1, while other code is PVHv2 specific.
This allows booting FreeBSD as a PVHv2 DomU and Dom0.
Sponsored by: Citrix Systems R&D
Allow the hypercall page to be initialized very early, even before
vtophys is functional. Also make the function global so it can be
called by other files.
This will be needed in order to perform the early bringup on PVHv2
guests.
Sponsored by: Citrix Systems R&D
When booted as PVHv2, there's no ACPI CPU object, so attach the PV CPU
device in order to take it's place.
This is required in case some device or driver tries to poke at the
PCPU device field.
Sponsored by: Citrix Systems R&D
HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.
Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.
This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.
Sponsored by: Citrix Systems R&D
The PVHv2 entry point is fairly similar to the multiboot1 one. The
kernel is started in protected mode with paging disabled. More
information about the exact BSP state can be found in the pvh.markdown
document on the Xen tree.
This entry point is going to be joined with the native entry point at
hammer_time, and in order to do so the BSP needs to be bootstrapped
into long mode with the same set of page tables as used on bare metal.
Sponsored by: Citrix Systems R&D
found in some MacBook Pro.
PR: 229727
Reported by: Stephan Neuhaus <sten@artdecode.de> and others
Tested by: Stephan Neuhaus <sten@artdecode.de>
Approved by: mav (mentor)
MFC after: 1 month
These changes ensure that reclaim_pv_chunk() can be safely be
executed concurrently by multiple threads.
Reviewed by: alc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16304
This is a trivial comment-only fix. The man page for kevent(2) gives
the definition of struct kevent, including a comment on each
field. The actual definition in sys/event.h omitted the comments on
some fields. Add the comments in. Not only does this make the man page
and include file agree, but the comments are useful in and of
themselves.
Reviewed by: kib (D15778: commented that this should be a separate commit)
MFC after: 3 days
Sponsored by: Dell EMC
Query the minimal inline mode supported by the card.
When creating a send queue, cache the queried mode and optimize the transmit
if no inlining is required. In this case, we can avoid touching the headers
cache line and avoid dirtying several more lines by copying headers into
the send WQEs. Also, if no inline headers are used, hardware assists in
the VLAN tag framing.
Submitted by: kib@, slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Issue: IO fails immediately after doing port-toggle.
Fix: Added LDT(Device Lost Timer)- we wait a specific period of time prior to telling the OS about lost device.
Approved by: ken, mav
MFC after: 3 days
Differential Revision: D16196
Track session objects in the framework, and pass handles between the
framework (OCF), consumers, and drivers. Avoid redundancy and complexity in
individual drivers by allocating session memory in the framework and
providing it to drivers in ::newsession().
Session handles are no longer integers with information encoded in various
high bits. Use of the CRYPTO_SESID2FOO() macros should be replaced with the
appropriate crypto_ses2foo() function on the opaque session handle.
Convert OCF drivers (in particular, cryptosoft, as well as myriad others) to
the opaque handle interface. Discard existing session tracking as much as
possible (quick pass). There may be additional code ripe for deletion.
Convert OCF consumers (ipsec, geom_eli, krb5, cryptodev) to handle-style
interface. The conversion is largely mechnical.
The change is documented in crypto.9.
Inspired by
https://lists.freebsd.org/pipermail/freebsd-arch/2018-January/018835.html .
No objection from: ae (ipsec portion)
Reported by: jhb
1. Fix taskqueues drain/free to fix panic seen when interface is being
bought down and in parallel asynchronous link events happening.
2. Fix bxe_ifmedia_status()
Submitted by:Vaishali.Kulkarni@cavium.com and Anand.Khoje@cavium.com
MFC after:5 days
Remove all the big-endian arm architectures (ixp425 and ixp435)
support in the kernel and associated drivers.
Differential Revision: https://reviews.freebsd.org/D16257
Also, I misspoke in r336428. Any devices on sparc64 machines on "isa"
that can do DMA can do 32-bit address DMA and aren't limited to
24-bits of address.
For setups having a large amount of PCI devices, it makes sense to limit the
number of MSIX vectors per PCI device, in order to avoid running out of IRQ
vectors.
MFC after: 1 week
Sponsored by: Mellanox Technologies
The scatter list is formed by the chunks of MCLBYTES each, and larger
than default packets are returned to the stack as the mbuf chain.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
This deduplicates the code a bit, and also implicitly adds missing
callout_stop() to in[6]_lltable_delete_entry() functions.
PR: 209682, 225927
Submitted by: hselasky (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4605
To access the data, set sysctl dev.mce.N.conf.debug_stats to 1.
This enables the sysctl node dev.mce.N.hw_ctx_debug. Its content is
the mapping of each channel' number to used receive queue and associated
completion queue, set of the transmit queues numbers and corresponding
completion queues.
Trimmed example output:
channel 30 rq 188 cq 1085
channel 30 tc 0 sq 187 cq 1084
channel 31 rq 191 cq 1087
channel 31 tc 0 sq 190 cq 1086
MFC after: 1 week
Sponsored by: Mellanox Technologies
Device detach and setting error state may deadlock over the interface mutex
like this:
a) Detach code in mlx5en waits until error state is set while the interface
mutex is locked.
b) The set error handler needs to lock the interface mutex before it can
set the error state.
The solution is to use atomics to set the error state.
MFC after: 1 week
Sponsored by: Mellanox Technologies
