- Optional components go in OptionalObsoleteFiles
- Move gperf removal to be based on MK_GCC only, not MK_CXX and MK_GCC
Reviewed by: imp, sbruno
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2421
1. While disabling interrupt the FW disables interrupts for only 16 vectors.
In case of Invader which supports 96 MSI-x vectors, some spurious interrupts
may come on other vectors even after interrupt disable. So, driver uses a flag
and ignores the spurious interrupts.
2. Reply queue depth is made double the number of commands supported by FW.
3. Misplaced interrupt enable code is now moved down in the OCR path.
4. Updated error handling code in OCR path.
5. Removed un-necessary print.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
issued through the ioctl() interface prior to the kill adapter. This ensures
userspace ioctl() system calls issued just before a kill adapter don't get stuck in
wait state and IOCTLs are returned to application.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
MEGASAS_HBA_OPERATIONAL before getting new RAID map.
There will be a small window where IO will come from OS with old RAID map.
This patch will update adapter state to MEGASAS_HBA_OPERATIONAL,
only after driver has new RAID map to avoid any IOs getting build using old RAID map.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
for two Drive Raid-1 configuration only.
Now, Driver support fast path read load balancing for all (any number of disk) Raid-1 configuration.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
FW expose Secure Jbod support via Controller properity.
Firmware expect IOs to be received from different IO path than
conventional fast path queue, in case of SED drives.
To have Secure jbod support user need driver and firmware support.
Reviewed by: ambrisko
MFC after: 2 weeks
Sponsored by: AVAGO Technologies
It is not required to use CLO to recover from task file error, it should
be enough to do only stop/start, that does not clear the PxTFD.STS.ERR.
MFC after: 13 days
- Must-Be-Zero bits cannot be set.
- EFER_LME and EFER_LMA should respect the long mode consistency checks.
- EFER_NXE, EFER_FFXSR, EFER_TCE can be set if allowed by CPUID capabilities.
- Flag an error if guest tries to set EFER_LMSLE since bhyve doesn't enforce
segment limits in 64-bit mode.
MFC after: 2 weeks
available on the aml8726-m6 (and later) SoC which allows for
lower speeds.
Differential Revision: https://reviews.freebsd.org/D2433
Submitted by: John Wehle
sysutils/u-boot-beaglebone port:
- In arm/BEAGLEBONE.conf, set EMBEDDEDPORTS to the
sysutils/u-boot-beaglebone port.
- In arm/release.sh, remove BEAGLEBONE from setting WANT_UBOOT
- In tools/arm/crochet-BEAGLEBONE.conf, override the
beaglebone_check_uboot(), and set BEAGLEBONE_UBOOT to
/tmp/external/u-boot-beaglebone, and create symlinks to the
u-boot files in /usr/local/share/u-boot-beaglebone and the
uEnv.txt file in crochet/board/Beaglebone/files.
Sponsored by: The FreeBSD Foundation
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
Thanks to: loos@
Sponsored by: The FreeBSD Foundation
each of the existing kernel configs. This gives a place to put config
that applies to the entire arch.
Add the ARM_NEW_PMAP option to std.armv6. This is working well in early
testing and it's time for wide exposure, but it's still nice to be able
to fall back to the old implementation for testing when a problem comes
along. Eventually the option and the old implementation will go away.
The opportunity now exists to move a whole lot of boilerplate from all the
arm kernel config files into std.arm*, but that's a commit for another day.
as seek to teh last location saved will still work. This is needed for Samba
to be able to correctly handle delete requests from windows. This does not
completely fix seekdir when deletes are present but fixes the worst of the
problems. The real solution must involve some changes to the API for eh VFS
and getdirentries(2).
Obtained from: Panzura inc
MFC after: 1 week
In an attempt to improve performance, cp reordered directories first
(although the comment says directories last). This is not effective with new
UFS layout policies.
The sorting reorders multiple arguments passed to cp, which may be
undesirable.
Additionally, the comparison function does not induce a total order. Per
POSIX, this causes undefined behaviour in qsort().
NetBSD removed the sorting in 2009.
On filesystems that return directory entries in hash/btree order, sorting by
d_fileno before statting improves performance on large directories. However,
this can only be implemented in fts(3).
PR: 53475
Reviewed by: bde (in 2004)
MFC after: 1 week
At present zfs_domount() acquires a reference on the filesystem's root vnode
and that reference is kept until zfs_umount.
The latter calls vflush(rootrefs = 1) to dispose of the extra reference.
There is no explanation of why that reference is kept - what problem it
solves or what behavior it improves.
Also, that logic is FreeBSD specific.
There is one real problem with that reference, though.
zfs recv -F may receive a full, non-incremental stream to a mounted filesystem.
In that case the received root object is likely to have a different z_gen
attribute value. Because of that, zfs_rezget will leave the previous root znode
and vnode disassociated from the actual object (z_sa_hdl == NULL).
Thus, future calls to VFS_ROOT() -> zfs_root() will produce a new vnode-znode
pair, while the old one will be kept alive by the outstanding reference.
So, the outstanding reference will not actually be for the new root vnode
(or, more precisely, vnodes - because a root vnode may be recycled and a newer
one can be created).
As a result, when vflush(rootrefs = 1) s called there will be two problems:
- a leaked reference on the old root vnode preventing a graceful unmount
- insufficient references on the actual root vnode leading to a crash upon
access to the vnode after it is destroyed by vgone() + vdrop()
The second issue will actually override the first one.
Differential Revision: https://reviews.freebsd.org/D2353
Reviewed by: delphij, kib, smh
MFC after: 17 days