Commit Graph

92140 Commits

Author SHA1 Message Date
John-Mark Gurney
57499a32b1 make allocation of the necessary data structures most efficent by using
a full page instead of only part of a page.

Reviewed by:	joe
2003-07-15 23:19:49 +00:00
John-Mark Gurney
86231a1846 fix support for umass and related devices on ohci. This is a partial
sync of the NetBSD code.

fix isochornous support for ohci.  This gets webcams like my OV511
working on sparc64.

PR:		kern/52589
Submitted by:	Bruce R. Montague (isochonous support)
Reviewed by:	joe among others
2003-07-15 23:12:54 +00:00
Luigi Rizzo
3004afca6e Userland side of:
Allow set 31 to be used for rules other than 65535.
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.

This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.

Suggested by: Paul Richards
2003-07-15 23:08:44 +00:00
Luigi Rizzo
4805529cf8 Allow set 31 to be used for rules other than 65535.
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.

This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.

sbin/ipfw changes to allow manipulation of set 31 will follow shortly.

Suggested by: Paul Richards
2003-07-15 23:07:34 +00:00
John-Mark Gurney
45dd937507 make usb bus_dma aware.
Reviewed by:	joe among others
2003-07-15 22:42:37 +00:00
John-Mark Gurney
9f4b5407ca sync w/ NetBSD
part of:
revision 1.101
date: 2002/06/01 23:51:04;  author: lukem;  state: Exp;  lines: +5 -7
2003-07-15 22:19:00 +00:00
John-Mark Gurney
e65f8c784d minor white space fix up
initalize itds
remove extra htole32.  Things don't work to well when you do
htole32(htole32(var))
2003-07-15 22:14:22 +00:00
Jeffrey Hsu
9d11646de7 Unify the "send high" and "recover" variables as specified in the
lastest rev of the spec.  Use an explicit flag for Fast Recovery. [1]

Fix bug with exiting Fast Recovery on a retransmit timeout
diagnosed by Lu Guohan. [2]

Reviewed by:		Thomas Henderson <thomas.r.henderson@boeing.com>
Reported and tested by:	Lu Guohan <lguohan00@mails.tsinghua.edu.cn> [2]
Approved by:		Thomas Henderson <thomas.r.henderson@boeing.com>,
			Sally Floyd <floyd@acm.org> [1]
2003-07-15 21:49:53 +00:00
Nate Lawson
ff40920e9e Change the msleep part of EcWaitEvent to be a separate loop, fixing a
problem that for some very slow ECs (~6 ms occasionally) causes a
timeout.  Also finish resource cleanup in the error case in attach.

Tested by:	ume
2003-07-15 19:24:36 +00:00
Nate Lawson
fa1045a79d Remove old defines since they are no longer used. 2003-07-15 19:19:54 +00:00
Nate Lawson
8a7e9ab4b7 Fix the ACPI_DEBUG build for the non-module case. Move the #define into
acfreebsd.h and remove it from the Makefile.  Now ACPI_DEBUG implies
ACPI_DISASSEMBLER.

Noticed by:	marcel
2003-07-15 19:18:41 +00:00
David E. O'Brien
edc02bfbfa Don't directly use GCC warnings. 2003-07-15 18:05:28 +00:00
David Malone
936664b119 Move my inetd maintainer note to src/MAINTAINERS. 2003-07-15 16:52:22 +00:00
David Malone
d2be82dad7 Get the connections per minute calculation right. By good fortune
(or possibly testing) the previous formula worked for the default
constants compiled into inetd, but if you recompiled with different
values of CHTSIZE and CHTGRAN the calculation might not have worked.

PR:		54354
Submitted by:	Claus Assmann <ca@sendmail.org>
Submitted by:	Jose Marcio Martins da Cruz <Jose-Marcio.Martins@ensmp.fr>
MFC after:	5 days
2003-07-15 16:46:45 +00:00
Hartmut Brandt
fe8dee1062 Instead of returning an error call the ioctl() handler of the interface
when we get request that we cannot handle ourself. This allows userland
to reach the ATM interfaces for ioctls.
2003-07-15 15:51:50 +00:00
Hartmut Brandt
4b394dbdd4 Test the OPEN flag to see whether a VCI is already open on the hook instead
to look for vci != 0. We can now open VCI 0 for monitoring purposes.
2003-07-15 15:48:10 +00:00
Hartmut Brandt
71c47209f5 Be careful to call bus_dmamap_load with BUS_DMA_NOWAIT so that the
callback will never be deferred. ATM needs to prevent cell and packet
ordering. Also use the default mutex and lock functions (those that
panic) for the tag creation.
2003-07-15 15:45:41 +00:00
Hiroki Sato
38fa6bf3dc Bump the version numbers used for man page reference. 2003-07-15 15:40:21 +00:00
Hiroki Sato
fc4e357d51 New release notes: hatm(4), patm(4).
Updated release notes: OpenPAM.

Remove references to rescue(7).
2003-07-15 15:39:52 +00:00
Dag-Erling Smørgrav
015d0cd6e2 Add a __DECONST() to unbreak the build. 2003-07-15 14:36:36 +00:00
David Xu
af161f2232 If initial thread is still a bound thread, don't change its signal mask. 2003-07-15 14:04:38 +00:00
Mike Makonnen
1fa84077e8 Move a period out of an if... clause. The period terminates the
line and must always appear on the line.

Submitted by:	netchild
2003-07-15 12:39:37 +00:00
Ceri Davies
513e86421d Back out revision 1.22.
Requested by:	bde
2003-07-15 12:23:12 +00:00
Hartmut Brandt
7213410131 Reference the patm(4) man page from here, like the other ATM drivers are
referenced.
2003-07-15 12:07:45 +00:00
Hartmut Brandt
6a6d06c97d The man page for the new IDT77252 driver. 2003-07-15 11:58:23 +00:00
Hartmut Brandt
8dd4275c36 This is a driver for IDT77252 based ATM interfaces. It has been tested
with a ProATM-155 and an IDT evaluation board and should also work
with a ProATM-25 (it seems to work at least, I cannot really measure
what the card emits). The driver has been tested on i386 and sparc64,
but should work an other archs also. It supports UBR, CBR, ABR and VBR;
AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be
opened for receiving in AALraw mode and receives all cells not claimed
by other open VCs (even cells with invalid GFC, VPI and VCI fields and
OAM cells).

Thanks to Christian Bucari from ProSum for lending two cards and answering
my questions.
2003-07-15 11:57:24 +00:00
Hartmut Brandt
b3d4fe3d04 Remove three unneccessary comparisons that were always true.
Spotted by: gcc
2003-07-15 11:50:59 +00:00
Hartmut Brandt
09d405d969 Implement an utility function that can be used by device drivers to
implement the ATMIOCGVCCS ioctls. This routine handles changing
VCC tables (which can occure because we cannot hold the driver mutex
while allocating memory) with a loop and a re-allocation, should the
table not fit in the allocated memory.
2003-07-15 10:37:09 +00:00
Hartmut Brandt
198b0c39a9 The mbuf put on the interface queue contains the 4-byte pseudoheader.
Account for this in the byte count.
2003-07-15 10:30:57 +00:00
Hartmut Brandt
21a023e9c8 Add identifiers for ProSum's and IDT's cards that are based on
the IDT77252 chip. The driver will follow soon.
2003-07-15 10:28:06 +00:00
Hartmut Brandt
918c6c0c7e ATM_PH_LLCSNAP and ATMIO_FLAG_LLCSNAP must have the same value, so
define one in terms of the other.
2003-07-15 10:26:34 +00:00
Luigi Rizzo
bbc39c8391 Make sure that comments are printed at the end of a rule.
Reported by:  Patrick Tracanelli <eksffa@freebsdbrasil.com.br>
2003-07-15 10:23:43 +00:00
Hartmut Brandt
e6b34a1dbb Protect a kernel structure by _KERNEL. 2003-07-15 10:22:55 +00:00
Hartmut Brandt
7e9024cdd9 Add a facility for devices, specifically network interfaces, that require
large to huge amounts of small or medium sized receive buffers. The problem
with these situations is that they eat up the available DMA address space
very quickly when using mbufs or even mbuf clusters. Additionally this
facility provides a direct mapping between 32-bit integers and these buffers.
This is needed for devices originally designed for 32-bit systems. Ususally
the virtual address of the buffer is used as a handle to find the buffer as
soon as it is returned by the card. This does not work for 64-bit machines
and hence this mapping is needed.
2003-07-15 08:59:38 +00:00
Garance A Drosehn
8e36ed92f2 (Hopefully) Last set of changes so all of lpr uses __FBSDID() for
setting rcsids, and uses a consistent format for 'sccsid' lines.

Reviewed by:	discussed with bde and obrien
MFC after:	15 days
2003-07-15 08:48:30 +00:00
Garance A Drosehn
c49759e23b More changes to use __FBSDID() for setting rcsids, and fix the
format of 'sccsid' lines so they consistently match style(9).
A minor Makefile change is needed so lptest.c can find lp.cdefs.h.

Reviewed by:	discussed with bde and obrien
MFC after:	15 days
2003-07-15 08:45:06 +00:00
Garance A Drosehn
6d261443e1 More changes to use __FBSDID() for setting rcsids, and fix the
format of 'sccsid' lines so they consistently match style(9)
Also the 'sccsid' line is formatted to match style(9), and
a 'From:' is removed so the sccsid returns to what it was back
in the days of '-r CSRG' (1996).

Reviewed by:	discussed with bde and obrien
MFC after:	15 days
2003-07-15 08:40:31 +00:00
Warner Losh
0838b40f1f More devices supported, but not in the man page 2003-07-15 07:27:57 +00:00
Dag-Erling Smørgrav
20b2067ac9 This commit was generated by cvs2svn to compensate for changes in r117615,
which included commits to RCS files with non-trunk default branches.
2003-07-15 07:23:52 +00:00
Warner Losh
fa3682c1c9 OpenBSD calls this AIRVAST, so use that instead 2003-07-15 07:22:21 +00:00
Warner Losh
f475f6fff3 sync to 1.58 2003-07-15 07:22:03 +00:00
Dag-Erling Smørgrav
043e3563a3 This commit was generated by cvs2svn to compensate for changes in r117610,
which included commits to RCS files with non-trunk default branches.
2003-07-15 07:18:26 +00:00
Dag-Erling Smørgrav
ca236e63dd Vendor import of OpenPAM Dogwood. 2003-07-15 07:18:26 +00:00
Garance A Drosehn
fdc632c823 More changes to use __FBSDID() for setting rcsids. For the filter
programs, minor Makefile changes are needed to find lp.cdefs.h.
For lpf.c, the 'sccsid' line is formatted to match style(9), and
a 'From:' is removed so the sccsid returns to what it was back
in the days of '-r CSRG' (1994).

Reviewed by:	discussed with bde and obrien
MFC after:	15 days
2003-07-15 07:01:01 +00:00
Marcel Moolenaar
e90153536e Rename thread_siginfo to cpu_thread_siginfo. 2003-07-15 04:43:33 +00:00
David Xu
4b7d5d84ee Rename thread_siginfo to cpu_thread_siginfo 2003-07-15 04:26:26 +00:00
Marcel Moolenaar
29cc06cf27 Fix typo: Passing the first argument to exit() in out2 does not work.
Trust me.
2003-07-15 03:50:38 +00:00
Warner Losh
961071a274 Siemens SpeedStream SS1021
Obtained from: OpenBSD (minor mods for our stuff); millert
2003-07-15 03:41:13 +00:00
Warner Losh
6a78c9e48a Add Siemens SpeedStream 1021
Obainted from: openbsd (in spirit); millert
2003-07-15 03:34:08 +00:00
Warner Losh
2f71d7885d sync to pccarddevs 1.57 2003-07-15 03:30:31 +00:00