This modifies CFLAGS and tweaks sio.S to use the new calling convention.
The sio_init() and sio_putc() prototypes are modified so that other
users of this code know the correct calling convention.
This makes the code smaller when compiled with clang.
Reviewed by: jhb
Tested by: me and Freddie Cash <fjwcash gmail com>
on the fact that real hardware has almost fixed cost to read the ACPI timer.
It is virtually always false for hardware emulation and it makes no sense to
read it multiple times, which is already quite expensive for full emulation.
to the l_load() method in the file_formats structure, while being passed
an address as an argument (dest). With file_load() calling arch_loadaddr()
now, this bug is a little bit more significant.
Spotted by: nyan@ (nice catch!)
From the ath9k source:
==
11N: we can no longer afford to self link the last descriptor.
MAC acknowledges BA status as long as it copies frames to host
buffer (or rx fifo). This can incorrectly acknowledge packets
to a sender if last desc is self-linked.
==
Since this is useful for pre-AR5416 chips that communicate PHY errors
via error frames rather than by on-chip counters, leave the support
in there, but disable it for AR5416 and later.
from the interface index, then decrease refcount, not vice versa.
Otherwise there is a race (reproducible) when if_free_internal()
contests on IFNET_WLOCK(), and we got a zero-refed ifnet in the
index for a long time. It may be picked by some other thread,
that runs ifnet_byindex_ref(), who takes the ifnet from index,
and bumps refcount. When reader drops the lock, if_free_internal()
proceeds with free. Then reader tries to free it a second time.
boundaries. For good measure, align all other objects to cache
lines boundaries.
Use the new arch_loadseg I/F to keep track of kernel text and
data so that we can wire as much of it as is possible. It is
the responsibility of the kernel to link critical (read IVT
related) code and data at the front of the respective segment
so that it's covered by TRs before the kernel has a chance to
add more translations.
Use a better way of determining whether we're loading a legacy
kernel or not. We can't check for the presence of the PBVM page
table, because we may have unloaded that kernel and loaded an
older (legacy) kernel after that. Simply use the latest load
address for it.
1. arch_loadaddr - used by platform code to adjust the address at which
the object gets loaded. Implement PC98 using this new interface instead
of using conditional compilation. For ELF objects the ELF header is
passed as the data pointer. For raw files it's the filename. Note that
ELF objects are first considered as raw files.
2. arch_loadseg - used by platform code to keep track of actual segments,
so that (instruction) caches can be flushed or translations can be
created. Both the ELF header as well as the program header are passed
to allow platform code to treat the kernel proper differently from any
additional modules and to have all the relevant details of the loaded
segment (e.g. protection).
- Add more fields for USB device and host mode
- Add more information to USB PF header so that decoding
can easily be done by software analyzer tools like
Wireshark.
- Optimise usbdump to display USB streams in text format
more efficiently.
- Software using USB PF must be recompiled after
this commit, due to structure changes.
MFC after: 7 days
Approved by: thompsa (mentor)
bio_children > 1, g_destroy_bio() is never called and the bio
leaks. Fix this by calling g_destroy_bio() earlier, before the check.
Submitted by: Victor Balada Diaz <victor@bsdes.net> (initial version)
Approved by: pjd (mentor)
MFC after: 1 week
This is a MIPS4KC CPU with various embedded peripherals, including
wireless and ethernet support.
This commit includes the platform, UART, ethernet MAC and GPIO support.
The interrupt-driven GPIO code is disabled for now pending GPIO changes
from the submitter.
Submitted by: Aleksandr Rybalko <ray@dlink.ua>
environments into the kernel environment.
The eventual aim is to replace these with specific drivers for
the various bootloaders (redboot, uboot, etc.) This however will
work for the time being until it can be properly addressed.
Submitted by: Aleksandr Rybalko <ray@dlink.ua>
Change for Africa/Casablanca:
- The 3rd april 2011 at 00:00:00, [it] will be 3rd april 1:00:00
- The 31th july 2011 at 00:59:59, [it] will be 31th July 00:00:00
Update for SouthAmerica/Chili:
- Chile's clocks will go back an hour this year on the 7th of May instead
of this Saturday. They will go forward again the 3rd Saturday in
August, not in October as they have since 1968. This is a pilot plan
which will be reevaluated in 2012.
Change for Africa/Casablanca:
- The 3rd april 2011 at 00:00:00, [it] will be 3rd april 1:00:00
- The 31th july 2011 at 00:59:59, [it] will be 31th July 00:00:00
Update for SouthAmerica/Chili:
- Chile's clocks will go back an hour this year on the 7th of May instead
of this Saturday. They will go forward again the 3rd Saturday in
August, not in October as they have since 1968. This is a pilot plan
which will be reevaluated in 2012.
Obtained from: ftp://elsie.nci.nih.gov/pub/
- In softdep_revert_mkdir() find the dotaddref before we attempt to cancel
the jaddref so we can make assumptions about where the dotaddref is on
the list. cancel_jaddref() does not always remove items from the list
anymore.
- Always set GOINGAWAY on an inode in softdep_freefile() if DEPCOMPLETE
was never set. This ensures that dependencies will continue to be
processed on the inowait/bufwait list and is more an artifact of
the structure of the code than a pure ordering problem.
- Always set DEPCOMPLETE on canceled jaddrefs so that they can be freed
appropriately. This normally occurs when the refs are added to the
journal but if they are canceled before this point the state would
never be set and the dependency could never be freed.
Reported by: pho
Tested by: pho
There is a generic problem with the shims for ioctls that receive
pointers to the usermode data areas in the data argument. We either have
to modify the handler to accept UIO_USERSPACE/UIO_SYSSPACE indicator, or
allocate and fill a usermode memory for data buffer in the host format.
The change goes the second route, in particular because we do not need
to modify the handler.
Submitted by: John Wehle <john feith com>
MFC after: 2 weeks
this means that request timed out. Translate the meaningless EAGAIN to
ETIMEDOUT to give administrator a hint that he might need to increase timeout
in configuration file.
MFC after: 1 month
GEOM GATE to fix the issue described in r220264. This also means that we no
longer need -q option, remove it. Don't bother to leaving it as a no-op, as
ggatel(8) is just an example utility.
g_io_deliver(). In such case it increases 'pace' counter on each ENOMEM and
reschedules the request. The 'pace' counter is decreased for each request going
down, but until 'pace' is greater than zero, GEOM will handle at most 10
requests per second. For GEOM GATE users that are proxy to local GEOM providers
(like ggatel(8) and HAST) we can end up with almost permanent slow down of GEOM
down queue. This is because once we reach GEOM GATE queue limit, we return
ENOMEM to the GEOM. This means that we have, eg. 1024 I/O requests in the GEOM
GATE queue. To make room in the queue and stop returning ENOMEM we need to
proceed the requests of course, but those requests are handled by userland
daemons that handle them by reading/writing also from/to local GEOM providers.
For example with HAST, a new requests comes to /dev/hast/data, which is GEOM
GATE provider. GEOM GATE passes the request to hastd(8) and hastd(8)
reads/writes from/to /dev/da0. Once we reach GEOM GATE queue limit, to free up
a slot in GEOM GATE queue, hastd(8) has to read/write from/to /dev/da0, but
this request will also be very slow, because GEOM now slows down all the
requests. We end up with full queue that we can unload at the speed of 10
requests per second. This simply looks like a deadlock.
Fix it by allowing userland daemons that work with both GEOM GATE and local
GEOM providers to specify unlimited queue size, so GEOM GATE will never return
ENOMEM to the GEOM.
MFC after: 1 week
Use locale(1) to determine the locale instead of trying to hand roll it.
Correctly construct groff call based on charset and locale independently,
not the mix between the two.
Submitted by: uqs@
offset in the flash.
Some devices (eg the TPLink WR-1043ND) don't have a flash environment
partition which can be queried for the current board settings.
This particular workaround allows for image creators to use a hint
to set the base MAC address. For example:
hint.arge.0.eeprommac=0x1f01fc00
