Binutils has already been reduced to installing ld only on powerpc32
and as only on amd64. (Also objdump on every arch supported by binutils
2.17.50.) Although BINUTILS_BOOTSTRAP serves no purpose on MIPS there
is no reason to have a special case for it.
Sponsored by: The FreeBSD Foundation
Also update comments for which architectures use 128 bit long doubles,
as appropriate.
The softfloat specialization routines weren't updated since they
appear to be from an upstream source which we may want to update in
the future to get a more favorable license.
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D23658
Once upon a time, sparc64 was the only ld128 architecture. However,
both aarch64 and riscv are now such architectures. Many of the
comments about how slow multiplication was on old sparc64 processors
are now no longer true. However, since no evaluation has been done for
aarch64 yet, it's unclear if they are still relevant or not. If not,
the code should be changed. If so, the comments should remove the
uncertainty.
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D23658
This patch addresses an issue found in ztest where resilver
write zios that were passed to an indirect vdev would end up
being handled as though they were resilver read zios. This
caused issues where the zio->io_abd would be both read to
and written from at the same time, causing asserts to fail.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8193zfsonlinux/zfs@5aa95ba0d3
MFC after: 1 week
This patch fixes an issue discovered by ztest where
dsl_scan_ddt_entry() could add I/Os to the dsl scan queues
between when the scan had finished all required work and
when the scan was marked as complete. This caused the scan
to spin indefinitely without ending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010zfsonlinux/zfs@5e0bd0ae05
MFC after: 1 week
This patch corrects 2 small bugs where scn->scn_phys_cached was
not properly updated to match the primary copy when it needed to
be. The first resulted in the pause state not being properly
updated and the second resulted in the cached version being
completely zeroed even if the primary was not.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes#8010zfsonlinux/zfs@8cb119e3dc
MFC after: 1 week
When scn->scn_maxinflight_bytes has not been initialized it's
possible to hang on the condition variable in scan_exec_io().
This issue was uncovered by ztest and is only possible when
deduplication is enabled through the following call path.
txg_sync_thread()
spa_sync()
ddt_sync_table()
ddt_sync_entry()
dsl_scan_ddt_entry()
dsl_scan_scrub_cb()
dsl_scan_enqueuei()
scan_exec_io()
cv_wait()
Resolve the issue by always initializing scn_maxinflight_bytes
to a reasonable minimum value. This value will be recalculated
in dsl_scan_sync() to pick up changes to zfs_scan_vdev_limit
and the addition/removal of vdevs.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#7098zfsonlinux/zfs@f90a30ad1b
MFC after: 1 week
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
like the mlx-c5 and c6 that require a "setup" routine before
the tcp_ratelimit code can declare and use a rate. I add the
setup routine to if_var as well as fix tcp_ratelimit to call it.
I also revisit the rates so that in the case of a mlx card
of type c5/6 we will use about 100 rates concentrated in the range
where the most gain can be had (1-200Mbps). Note that I have
tested these on a c5 and they work and perform well. In fact
in an unloaded system they pace right to the correct rate (great
job mlx!). There will be a further commit here from Hans that
will add the respective changes to the mlx driver to support this
work (which I was testing with).
Sponsored by: Netflix Inc.
Differential Revision: ttps://reviews.freebsd.org/D23647
Add support for non-ID registers when printing CPU information. This is
used with the cache type register to print details of the cache on boot.
Sponsored by: Innovate UK
The requirements of an Address Space ID allocator and a Virtual Machine ID
allocator are similar. Generalise the former code so it can be used with
the latter.
Reviewed by: alc (previous version)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23831
On arm64 the stage 1 and stage 2 pte formats are similar enough we can
reuse the pmap code for both. As they are only similar and not identical
we need to know if we are managing stage 1 or stage 2 tables.
Add an enum to store this information and a check to make sure it is
set to stage 1 when we manage stage 1 pte fields.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23830
The locking defines for if_bridge used to live in if_bridgevar.h, but
they're only ever used by the bridge implementation itself (in
if_bridge.c). Moving them into the .c file.
Reported by: philip, emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23808
Remove an old workaround that is no longer necessary since rS343824.
There used to be a problem with FMan interrupts firing on multiple CPUS
at the same time.
This ended up being due to multicast interrupts being unsupported in the
Freescale PIC (so instead of using a selection algorithm, it would do some
unspecified action, such as interrupting multiple cpus at random.)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23829
Now we execute sendfile_iodone() in all possible cases, which
guarantees that vm_object_pip_wakeup() is called and sfio structure
is freed.
At the beginning of sendfile initialize sfio->m to NULL, that would
indicate that the mbuf chain either doesn't exist, or belongs to the
syscall (not to I/O completion). Fill sfio->m only at a point when
we are positive that there are I/Os ongoing and before releasing
syscall's reference on sfio.
In sendfile_iodone() perform vm_object_pip_wakeup() once last
reference is released, then check for sfio->m. NULL pointer
indicates that we need only to free the memory.
Reviewed by: jtl, gallatin
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE.
Reviewed by: royger
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23638
When turning IBRS mitigation using sysctl, as opposed to loader tunable,
send IPI to tweak MSR on all cores. Right now code only performed MSR write
onr the CPU where sysctl was run.
Properly report hw.ibrs_active for IBRS_ALL. Split hw_ibrs_ibpb_active out
from ibrs_active, to keep the current semantic of guiding kernel entry and
exit handlers.
Reported and tested by: mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Make style.9 read as a current statement of C99 preferences, rather than a
description of ongoing changes to our preferred style. Alsu use the short
form "ISO C99" on the 2nd and later instances rather than repeating the
unwieldy `ISO/IEC 9899:1999 ("ISO C99")` each time.
Reviewed by: cem, imp, jhb, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23648
When moving the calculations for the optlen into the if (opt) block
which deals with possible extension headers I failed to initialise
unfragpartlen to the ipv6 header length if there were no extension
headers present. Correct that mistake to make IPv6 fragment length
calculcations work again.
Reported by: hselasky, kp
OKed by: hselasky, kp
MFC after: 3 days
X-MFC with: r358167
PR: 244393
key-codes from the USB keyboard. Negative key-codes are currently skipped.
While at it use the bit size value provided by the HID location structure
instead of assuming a value of 8.
This fixes a regression issue after r357861.
Reported by: Minoru TANABE <kotanabe3@gmail.com>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
commands have completed.
It's not OK to force complete any pending commands before we send the
REMOVE_DEVICE. Instead, make sure that all pending commands are complete before
sending that. By trying to second guess the firmware here, we run the risk of
completing commands twice, which leads to corruption.
This removes the forced completion of commands introduced in r218811. So it's a
partial backout of that commit, but replaces it with a more rebust
mechanism. Either these commands will complete due to the TARGET RESET, or they
will timeout and be aborted, but they will all complete.
Add assert that all commands are complete to REMOVE_DEVICE completion
routine. We attempt to assure this programatically, so we shouldn't have any
commands in the queue because we've waited for them all. Any commands that make
it into our action routine after we mark the target in removal will complete
immediately with an error.
When we're removing a target that's not a volume, advertise up the stack that
it's actually gone, as opposed to having a transient selection error we should
retry. Do this both in the action routine, and when we get a notification of an
aborted command. We don't do this for volumes because the driver tries hard not
to advertise to the OS a volume has disappeared.
Apply these changes to both mpr and mps since they are based on quite similar
designs.
Discussed with: scottl@
Differential Revision: https://reviews.freebsd.org/D23768
After the network epoch was added, we lost the ability to migrate the
ithread in the middle of dispatch, as being in the network epoch will pin
the current thread (for safety reasons.)
Luckily, we don't actually have to do this workaround in the first place,
as we can just bind it to the correct cpu when we preallocate it.
Pass dev through to XX_PreallocAndBindIntr() and actually bind it to the
cpu like it was supposed to in the first place, instad of leaving it
floating and moving it to the correct cpu the first time it fires.
This fixes panics while bringing up dtsec on my X5000.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23826
Since powerpc64 has such a large virtual address space, significantly larger
than its physical address space, take advantage of this, and create yet
another DMAP-like instance for the device mappings. In this case, the
device mapping "DMAP" is in the 0x8000000000000000 - 0xc000000000000000
range, so as not to overlap the physical memory DMAP.
This will allow us to add TLB1 entry coalescing in the future, especially
useful for things like the radeonkms driver, which maps parts of the GPU at
a time, but eventually maps all of it, using up a lot of TLB1 entries (~40).
Before this change, LLD10 was creating several extra PT_LOAD sections,
which OFW does not understand.
Like we do for the kernel already, specify the program headers manually.
Additionally, to work around a crash in our base ld.bfd, we need to
actually assign something to the output section. LLD does not need this.
One side effect of this change is the removal of the GNU_STACK header.
This is more correct, since we are using a statically-allocated stack and
RWX mappings across the board this early in boot.
Reviewed by: jhibbits, Fangrui Song <i@maskray.me>
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23778
switch over to opt-in instead of opt-out for epoch.
Instead of IFF_NEEDSEPOCH, provide IFF_KNOWSEPOCH. If driver marks
itself with IFF_KNOWSEPOCH, then ether_input() would not enter epoch
when processing its packets.
Now this will create recursive entrance in epoch in >90% network
drivers, but will guarantee safeness of the transition.
Mark several tested drivers as IFF_KNOWSEPOCH.
Reviewed by: hselasky, jeff, bz, gallatin
Differential Revision: https://reviews.freebsd.org/D23674
if_capabilities indicates capabilities supported by the hardware;
if_capenable which are enabled. Note that rx checksum is still disabled
in the driver at compile time.
Submitted by: Johannes <iz-rpi04@hs-karlsruhe.de>
MFC after: 2 weeks
In two places in ip6_output we are doing (delayed) checksum calculations.
The initial logic came from SCTP in r205075,205104 and later I copied
and adjusted it for the TCP|UDP case in r235958.
The problem was that the original SCTP offsets were already wrong for any
case with extension headers present given IPv6 extension headers are not
part of the pseudo checksum calculations.
The later changes do not help in case there is checksum offloading as for
extension headers (incl. fragments) we do currrently never offload as we
have no infrastructure to know whether the NIC can handle these cases.
Correct the offsets for delayed checksum calculations and properly handle
mbuf flags. In addition harmonize the almost identical duplicate code.
While here eliminate the now unneeded variable hlen and add an always
missing mtod() call in the 1-b and 3 cases after the introduction of
the mb_unmapped_to_ext() calls.
Reported by: Francis Dupont (fdupont isc.org)
PR: 243675
MFC after: 6 days
Reviewed by: markj (earlier version), gallatin
Differential Revision: https://reviews.freebsd.org/D23760
In preperation for adding bhyve support to arm64 we need to split the
stage 1 and stage 2 pte fields to allow future changes to create stage 2
page tables.
MFC after: 1 month
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23669
GENERICSF is just like GENERIC, only creates a soft-float kernel. Omit it from the
universe build for now.
Reviewed by: philip
Differential Revision: https://reviews.freebsd.org/D23812
Give up the battle to keep extra files in $MACHINE/compile to keep the file in
the tree. Instead, create CDIR (usually ../compile) if it doesn't exist when
we're using a default build location (eg, not using -d). If it does, we do
nothing. This only affects people that do old-school builds, but it's bit me a
dozen times since last summer so time to fix the bug.
