Volume 3B: System Programming Guide, Part 2", CPUs with family 0x6 and model
above or 0xE and CPUs with family 0xF and model above or 0x3 have invariant
TSC.
Volume 3B: System Programming Guide, Part 2", CPUs with family 0x6 and model
above or 0xE and CPUs with family 0xF and model above or 0x3 have invariant
TSC.
us working malloc in the fork child of the multithreaded process.
Although POSIX requires that only async-signal safe functions shall be
operable after fork in multithreaded process, not having malloc lower
the quality of our implementation.
Tested by: rink
Discussed with: kan, davidxu
Reviewed by: kan
MFC after: 1 month
* Lookup uname/gname if not provided by the archive (I copied the
uname/gname lookup cache from bsdtar)
* Format device number instead of size for device nodes
* Format date.
There's still a few improvements that I could copy from
bsdtar, especially the locale-aware safe_fprintf() code
and the locale-aware setup for day_first date formatting.
(And, of course, I need to think through a clean way to
push this stuff down into libarchive.)
Thanks to Peter Wemm for reminding me of this overlooked TODO item.
are safe to print, try to take into account the current locale.
This iterates over output strings using mbtowc() to identify
multi-byte sequences. If iswprint() claims the corresponding
wide character is printable, the original bytes are passed
through. Otherwise, we expand characters into C-style
\-escape sequences.
Submitted by: Michihiro NAKAJIMA
MFC after: 30 days
Change types used in the linux' struct msghdr and struct cmsghdr
definitions to the properly-sized architecture-specific types.
Move ancillary data handler from linux_sendit() to linux_sendmsg().
Submitted by: dchagin
Add a custom version of copyiniov() to deal with the 32-bit iovec
pointers from userland (to be used later).
Adjust prototypes for linux_readv() and linux_writev() to use new
l_iovec32 definition and to match actual linux code. In particular,
use ulong for fd (why ?).
Submitted by: dchagin
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
to the fs, but before a vnode on the fs is locked, unmount may free fs
structures, causing access to destroyed data and freed memory.
Introduce a vfs_busymp() function that looks up and busies found
fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the
implementation of the handle syscalls.
Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in
sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular,
sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl
handler, that prevents Giant-locked unmount code to interfere with it.
Noted by: tegge
Reviewed by: dfr
Tested by: pho
MFC after: 1 month
- Print flags in hex.
- Note that flags can be fine and panic can be due unexpected error condition.
- Remove redundant new line character.
Eventhough panic message excess 80 characters keep it in one line so it is
easier to grep.
In file included from /src/sys/modules/powermac_nvram/../../dev/powermac_nvram/powermac_nvram.c:38:
@/dev/ofw/ofw_bus.h:36:24: error: ofw_bus_if.h: No such file or directory
I am not sure for how long this had not worked and if it was just the
latest vimage commit that had revealed this or if nobody had built
universe successfully in a while. Btw, the tinderbox did not complain
either so that is probably the reason noone had noticed.
mount_msdosfs: /dev/cf0s1: : Operation not supported by device
and thought I'd fix it to be:
mount_msdosfs: /dev/cf0s1: Operation not supported by device
Not sure why errmsg isn't getting filled in, or why this error is even
happening at all... (fsck_msdosfs is clean, and I can mount this same
CF elsewhere).
underneath #ifdef VIMAGE blocks.
This change introduces some churn in #include ordering and nesting
throughout the network stack and drivers but is not expected to cause
any additional issues.
In the next step this will allow us to instantiate the virtualization
container structures and switch from using global variables to their
"containerized" counterparts.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
The mqfs_search() routine uses strncmp() to match message queue objects
by name. This is because it can be called from environments where the
file name is not null terminated (the VFS for example).
Unfortunately it doesn't compare the lengths of the message queue names,
which means if a system has "Queue12345", the name "Queue" will also
match.
I noticed this when a student of mine handed in an exercise using
message queues with names "Queue2" and "Queue".
Reviewed by: rink
