Until now, the boot image can be embedded into the loader with
/sys/tools/embed_mfs.sh, and memory disk (MD) is already supported
in loader source. But due to memory disk (MD) driver isn't registered
to the loader yet, the boot image can't be boot from embedded memory
disk.
Reviewed by: dab, tsoome
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D29512
Capsicum did not prevent certain privileged networking operations,
specifically creation of raw sockets and network configuration ioctls.
However, these facilities can be used to circumvent some of the
restrictions that capability mode is supposed to enforce.
Add capability mode checks to disallow network configuration ioctls and
creation of sockets other than PF_LOCAL and SOCK_DGRAM/STREAM/SEQPACKET
internet sockets.
Reviewed by: oshogbo
Discussed with: emaste
Reported by: manu
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29423
This replicates an issue observed on pfSense: https://redmine.pfsense.org/issues/11436
In essence, reply-to is needed to ensure that connections always leave
the WAN interface they came in on, but this confused the state tracking.
MFC after: 2 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
When we find a state for packets that was created by a reply-to rule we
still need to process the packet. The state may require us to modify the
packet (e.g. in rdr or nat cases), which we won't do with the shortcut.
MFC after: 2 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
44c125c4ce switched the nvlist allocations
to be M_WAITOK, but this precludes the use in non-sleepable contexts.
(E.g. with a nonsleepable lock held).
All callers for these allocation functions already cope with memory
alloation failures, so there's no reason to allow sleeping during
allocations.
Reviewed by: melifaro, oshogbo
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29556
tests/sys/netfil/pf/synproxy fails if inetd has been running
outside of the jail because pidfile_open() fails with EEXIST.
tests/sys/netfil/pf/nat has the same problem but the test succeeds
because whether inetd is running is not so important.
Fix the problem by changing the pidfile path from the default
location.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29622
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Reviewed by: bcr
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29408
libarchive: Apply upstream commit a1b7bf8013fb7a11a486794247daae592db6f5ae
This fixes the failing test_read_append_filter_wrong_program test in CI
which has been failing since 01-Dec-2020.
Commit message from a1b7bf8013
Silence stderr in test_read_append_filter_program
When the FreeBSD testsuite runs the libarchive tests it checks that stderr
is empty. Since #1382 this is no longer the case. This change restores
the behaviour of silencing bunzip2 stderr but doesn't bring back the
output text check.
Partially reverts 2e7aa5d9
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29036
They have been failing for 1.5 months and the patch to fix them is stuck
in review so mark them as XFAIL for now to get Jenkins back to green.
To be reverted when https://reviews.freebsd.org/D28886 (or similar) is
commited.
Reviewed By: kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29528
With new ZFS prefetcher improvements it is no longer needed to fully
serialize reads to reach decent prediction hit rate. Softer variant
only creates small time window to reduce races instead of completely
blocking following reads while previous is running. It much less
hurts the performance in case of prediction miss.
MFC after: 1 month
By default, makefs(8) has very few spare inodes in its output images,
which is fine for static filesystems, but not so great for VM images
where many more files will be added. Make makefs(8) use the same
default settings as newfs(8) when creating images with free space --
there isn't much point to leaving free space on the image if you
can't put files there. If no free space is requested, use current
behavior of a minimal number of available inodes.
Reviewed by: manu
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29492
Commit: f2f1ab39c0 ("pci_user: call bus_translate_resource before BAR mmap")
broke build for 32-bit platforms due to rman_res_t and vm_paddr_t
incompatible types. Fix that.
On some armv8 machines it is possible that the mapping between CPU
and PCI bus BAR base addresses is not 1:1. In case a BAR is allocated
in kernel using bus_alloc_resource_any this translation is handled in
ofw_pci_activate_resource.
Do the same in pci_user.c by calling bus_translate_resource devmethod.
This fixes mmaping BARs to userspace on Marvell SoCs (Armada 7k8k/CN913x)
and possibly many other platforms.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Marvell
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29604
Some architectures - armv7, armv8 and riscv use VM_MEMATTR_DEVICE
when mapping device registers in kernel. Do the same in pciconf.
On armada8k SoC all reads from BARs mapped with hitherto attribute
(VM_MEMATTR_UNCACHEABLE) return 0xff's.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Marvell
Differential revision: https://reviews.freebsd.org/D29603
Use viewport "2" instead of "0" and change window type from MEM to IO.
Without these changes the MEM ATU window can be overwritten with the IO one.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Marvell
Differential revision: https://reviews.freebsd.org/D29516
Radix MMU code was missing TLB invalidations when some Level 3 PDEs were
modified. This caused TLB multi-hit machine check interrupts when
superpages were enabled.
Reviewed by: jhibbits
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D29511
This version fixes an issue (missing pop of top-of-stack value in the
"P" command of the dc program).
This issue did not affect the bc program, since it does not use dc as
an back-end to actually perform the calculations as was the case with
the traditional bc and dc programs.
The major number has been bumped due to Windows support that has been
added to this version. It does not correspond to a major change that
might affect FreeBSD.
MFC after: 3 days
Update to version 4.0.0
This version fixes an issue (missing pop of top-of-stack value in the
"P" command of the dc program).
This issue did not affect the bc program, since it does not use dc as
an back-end to actually perform the calculations as was the case with
the traditional bc and dc programs.
The major number has been bumped due to Windows support that has been
added to this version. It does not correspond to a major change that
might affect FreeBSD.
Add a man page for gptboot.efi. Describe when and how to use this as it differs
from the BIOS cases. Include cross reference for the preferred method described
in efibootmgr(8) as well as cross links in both gptboot(8) and gptboot.efi(8) to
the other.
This man page was heavily copied from the gptboot.8 man page by Warren Block.
They are different enough to need separate man pages for clarity, but there's
enough similarity that I worry about the duplication. In the really long term,
gptboot(8) will disappear, so having the same info here will help when that
day comes. In the short to medium term, the information is likely to not
change in gptboot(8) and any changes to gptboot.efi(8) will be easier to
make in a separate copy.
loader.efi(8) needs a complete rewrite from scratch, otherwise I'd have
referenced gptboot.efi(8) from there.
Suggetions from: cress@, mhorne@
Reviewed by: rpokala@
Differential Revision: https://reviews.freebsd.org/D29591
They have their own lifetime managed by the containing objects.
Premature and unexpected free causes corruption.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
the variables hold pointers to a linux_cdev, not to a FreeBSD cdev.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
dl_iterate_phdr() dlpi_tls_data should provide the TLS module segment
address, and not the TLS init segment address as it does now.
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Add flow_control to hw.ixl tunables tree to let override
initial flow control configuration for all interfaces.
Keep using configuration set by NVM by default.
Reviewed by: erj@, gallatin@
Tested by: gowtham.kumar.ks_intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D29338
freebsd-update compares the dates on man pages with mandoc.db, and if
any newer pages are found it regenerates mandoc.db.
Previously, if mandoc.db did not already exist the check failed and
freebsd-update then failed to create one. Now, check that mandoc.db
exists before performing the check for newer pages.
Reported by: bdrewery (in D10482)
Reviewed by: gordon
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29575
To support -DNO_ROOT work. The top-level installworld target creates a
new METALOG starting with `#mtree 2.0` so it needs to be first, to avoid
overwriting installkernel METALOG entries.
Reviewed by: gjb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29582
Older G4 and G3 models have a programmer's switch that can be used to
generate an interrupt to drop into the debugger.
This code hadn't been tested for a long time. It had been broken back
in 2005 in r153050.
Repair and modernize the code and add it to GENERIC.
Reviewed by: jhibbits (approved w/ removal of unused sc_dev var)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D29131
If the root file system is composed from multiple devices, wait for
devices to be ready before running zpool and dumpon rc scripts.
An example of this is if the bulk of the root file system exists on a
fast device (e.g. NVMe) but the /var directory comes from a ZFS dataset
on a slower device (e.g. SATA). In this case, it is possible that the
zpool import may run before the slower device has finished being probed,
leaving the system in an intermediate state.
Fix is to add root_hold_wait to the zpool and dumpon (which has a
similar issue) rc scripts.
PR: 242189
Reported by: osidorkin@gmail.com
Reviewed by: allanjude
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29101
This fixes a problem where ctld(8) would refuse to start on boot
with a specific IP address to listen on configured in ctl.conf(5).
It also fixes a problem where ctld(8) would fail to start with
some network interfaces which require a sysctl.conf(5) tweak
to configure them, eg to switch them from InfiniBand to IP mode.
PR: 232397
Reported By: Mahmoud Al-Qudsi <mqudsi at neosmart.net>
Submitted By: Jeremy Faulkner <gldisater at gmail.com>
Reviewed By: mav
Differential Revision: https://reviews.freebsd.org/D29578
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
Usually on boot the MPS is already configured by BIOS. But we've
found that on hot-plug it is not true at least for our Supermicro
X11 boards. As result, mismatch between root's configuration of
256 bytes and device's default of 128 bytes cause problems for some
devices, while others seem to work fine.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
