The DTrace fasttrap entry points expect a struct reg containing the
register values of the calling thread. Perform the conversion in
fasttrap rather than in the trap handler: this reduces the number of
ifdefs and avoids wasting stack space for traps that don't involve
DTrace.
MFC after: 2 weeks
Upstream dts for allwinner will require a syscon driver, since the emac node
coming in 4.15 will be using xref to /soc/syscon for configuring the emac
clock. Add a generic syscon driver to attach to /soc/syscon for use by
if_awg, providing basic read/write functionality to consumers.
syscon driver will also be used by arm64 at least for A64+H5 emac/if_awg.
Written by: mmel
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13295
Don't print when we can't find a file. Copy it instead to the error
buffer. Higher level routines determine if it's appropriate to print
the error message.
Also, remove dead code (labeled bogusly lost functionality) since we
never used that functionality. Remove unused arg from interact() too.
Sponsored by: Netflix
The laundry thread keeps track of the number of inactive queue scans
performed by the page daemon, and was previously using the v_pdwakeups
counter to count them. However, in some cases the inactive queue may
be scanned multiple times after a single wakeup, so it's more accurate
to use a dedicated counter.
Reviewed by: alc, kib (previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13422
The number of lun exposed is now exposed via sysctl by the kernel.
Use that number in ctlstat instead of the hardcoded version
Add a backward compatibility in case the sysctl(2) request fails.
This also allows ctlstat -l 1118 to actually work when having more than
1024 luns.
Reviewed by: avg, manu (both before the backward compatibility addition)
Approved by: avg, manu (both before the backward compatibility addition)
MFC after: 2 weeks
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D13446
I used the strongest barriers available on the architectures, so if
the future analysis show that it is excessive, the barriers could be
relaxed. Still, it is unlikely that it is meaningful to run IB on 32bit
ARM or current MIPS machines, so the change is to make WITH_OFED to pass
tinderbox.
Sponsored by: Mellanox Technologies
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D13329
ld.bfd accepts multiple listing of the same symbol in the version script.
lld is stricter and errors out. Since arm64 and sometimes amd64 use lld,
we should correct this cosmetic issue.
Sponsored by: Mellanox Technologies
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D13329
Logically, extend r286288 to cover all threads, by default.
The world has largely moved on from i386. Most FreeBSD users and developers
test on amd64 hardware. For better or worse, we have written a non-trivial
amount of kernel code that relies on stacks larger than 8 kB, and it "just
works" on amd64, so there has been little incentive to shrink it.
amd64 had its KSTACK_PAGES bumped to 4 back in Peter's initial AMD64 commit,
r114349, in 2003. Since that time, i386 has limped along on a stack half
the size. We've even observed the stack overflows years ago, but neglected
to fix the issue; see the 20121223 and 20150728 entries in UPDATING.
If anyone is concerned with this change, I suggest they configure their
AMD64 kernels with KSTACK_PAGES 2 and fix the fallout there first. Eugene
has identified a list of high stack usage functions in the first PR below.
PR: 219476, 224218
Reported by: eugen@, Shreesh Holla <hshreesh AT yahoo.com>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
changes to the packaging part of nanobsd more easily, or experiment
with the image contents w/o regenerating a whole new image tree. This
can save minutes when you don't need to do the installworld /
installkernel, etc.
Sponsored by: Netflix
limitations in mkimg we're still not quite to where I'd like to be
(I'd like to put s3 first on the disk, then s1, but mkimg won't allow
that currently). However, the resulting image now boots with qemu using:
qemu-system-x86_64 -hdd $file -serial telnet::4444,server -nographic
We'll need tweaks to create a specialized /etc/rc.d/growfs that can
create a properly grown image for either the simple or ping-pong
cases, but that will be later. Switched to pure serial console (-h)
instead of video or serial (-P) since that fits this usecase better.
Sponsored by: Netflix
saved register, but in arm EABI it may be either callee-saved or dedicated
to some special purpose (such as a TLS pointer). It appears clang does not
treat it as a callee-saved register (instead using it as another work
register, similar to r12).
Another important side effect of these changes is that saving an extra
register in the push/pop statements keeps the stack aligned to an 8-byte
boundary during the self_reloc() call, as it always should have been.
As stated in the PR...
Essentially the important caller-saved registers are pushed (r0, r1, r9, lr)
before the relocation call, and popped after. Then r8/r9 are saved as usual
for the syscall trampoline, and lr is stored in r8 (now free) as a
callee-saved value before calling into `main`.
The call to `main` can no longer be a tail call because we must restore r9
especially after main returns (although since we have used r8 to hold lr we
must also restore this).
PR: 224008
during startup. When a brand new chip leaves the factory, it is in a
special power-saving mode that disables most functions on the chip to
save battery power. The chip is stuck in this mode until the first write
to the time registers, which automatically clears the special power-saving
mode and starts the oscillator.
Also, the day-of-week register in this chip counts 1-7, not 0-6, so write
the values accordingly.
These changes are based on the patch submitted by Brian Scott, but I
elimated warnings since this condition is expected, and added some comments,
and so in general blame me for any mistakes.
PR: 223642
fstat(2) is going to be a lot faster than reading all of the bytes in a
file, if we just need a character count for a regular file. This fast path
was accidentally broken in r326736.
PR: 224160
Reported by: bde
Sponsored by: Dell EMC Isilon
The problem has been reported to upstream and similar change will
be included in next jemalloc release.
Submitted by: David Goldblatt <davidtgoldblatt@gmail.com>
MFC after: 2 weeks
The problem has been reported to upstream and similar change will
be included in next jemalloc release.
Submitted by: David Goldblatt <davidtgoldblatt@gmail.com>
MFC after: 2 weeks
pmap_track_page() only works with physical memory pages, which have a
constant vm_page_t address. Microoptimize pmap_track_page() to perform one
less operation under the lock.
to preconfigured values for -e, -p and -w flags.
Use non-negative symbols instead of magic values
in passwd_val/pw_password functions.
PR: 223431
Submitted by: Yuri Pankov (in part, patch for the manual)
Reported by: mav (mentor)
MFC after: 3 days
Relnotes: yes
wc(1)'s slow path for counting words or multibyte characters requires
conversion of the 8-bit input stream to wide characters. However, a faster
path can be used for counting only lines ('-l' -- newlines have the same
representation in all supported encodings) or bytes ('-c').
The existing line count optimization was not used if the input was the
implicit stdin. Additionally, it wasn't used if only byte counting was
requested. This change expands the fast path to both of these scenarios.
Expanding the buffer size from 64 kB helps reduce the number of read(2)
calls needed, but exactly what impact that change has and what size to
expand the buffer to are still under discussion.
PR: 224160
Tested by: wosch (earlier version)
Sponsored by: Dell EMC Isilon
This commit defines some macros used by the pNFS server code.
They will not be used until the main pNFS server code merge occurs,
which will probably be in April 2018.
rc.conf(5) documents the gifconfig_<interface> keyword, which is
no longer implemented. Document the replacement, which works with
cloned_interfaces as well.
Reviewed by: dab
Group Reviwers: manpages
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D13130
Improve options handling and error out if multiple mutually exclusive
options are passed to acpiconf. Switch from using atoi() to strtol() for
argument parsing, and add error checking and handling, instead of blindly
trusting that the integer conversion is OK.
Cange err() to errx() in once case, the errno value was garbage there.
Reviewed by: emaste
Approved by: emaste
Differential Revision: D13430
r292392 modified the active queue scan to weigh clean pages differently
from dirty pages when attempting to meet the inactive queue target. When
r306706 was merged into the PQ_LAUNDRY branch, this mechanism was
broken. Fix it by scalaing the correct page shortage variable.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13423
FFS performs asynchronous inode initialization, using a barrier write
to ensure that the inode block is written before the corresponding
cylinder group header update. Some GEOMs do not appear to handle
BIO_ORDERED correctly, meaning that the barrier write may not work as
intended. The sysctl allows one to work around this problem at the
cost of expensive file creation on new filesystems. The default
behaviour is unchanged.
Reviewed by: kib, mckusick
MFC after: 1 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13428
shell scripts in scripts don't need
to be chmod +x to work. In fact most are not.
Of the tests I found from a simple search:
65 are chmod +x
84 are chmod -x
simply disable the check for test shell scripts.
efibootmgr manages the UEFI BootXXXX variables that implement the UEFI
Boot Manager protocol defined in the UEFI standards. It is modeled
after the Linux program of the same name with a mostly compatible set
of command line options. Since there's a fair amount of OS specifioc
code due to differeing names and methods of doing things, the
compatibility isn't 100%.
Basic functionality is implemented, though the more advanced next boot
functionality that's been defined elsewhere is unimplemented.
Submitted by: Matt Williams (with unix / efi path xlate by me)
Sponsored by: Netflix
Now that the POSIX working group is going to require that basename(3)
and dirname(3) are thread-safe in future revisions of the standard,
there is even less of a need to provide basename_r(3). Remove this
function to prevent people from writing code that only builds on
FreeBSD and Bionic.
Removing this function seems to break exactly one port: sbruno@'s
qemu-user-static. I will send him a pull request on GitHub in a bit.
__FreeBSD_version will not be bumped, as any value from 2017 can be used
to test for the presence of a thread-safe basename(3)/dirname(3).
PR: https://bugs.freebsd.org/224016
This should fix ofed/libibnetdisc compilation with C-compilers
different from clang and GCC v4.2.1.
Submitted by: kib
Sponsored by: Mellanox Technologies
Create an interp class. Use it to separate out the different types of
interpreters: forth and simple with function pointers rather than
via #ifdefs.
Obtained from: lua boot loader project
(via https://bsdimp@github.com/bsdimp/freebsd.git lua-bootloader)
Sponsored by: Netflix
