If dso uses initial exec TLS mode, rtld tries to allocate TLS in
static space. If there is no space left, the dlopen(3) fails. If space
if allocated, initial content from PT_TLS segment is distributed to
all threads' pcbs, which was missed and caused un-initialized TLS
segment for such dso after dlopen(3).
The mode is auto-detected either due to the relocation used, or if the
DF_STATIC_TLS dynamic flag is set. In the later case, the TLS segment
is tried to allocate earlier, which increases chance of the dlopen(3)
to succeed. LLD was recently fixed to properly emit the flag, ld.bdf
did it always.
Initial test by: dumbbell
Tested by: emaste (amd64), ian (arm)
Tested by: Gerald Aryeetey <aryeeteygerald_rogers.com> (arm64)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19072
Drop the adj_free field from vm_map_entry_t. Refine the max_free field
so that p->max_free is the size of the largest gap with one endpoint
in the subtree rooted at p. Change vm_map_findspace so that, first,
the address-based splay is restricted to tree nodes with large-enough
max_free value, to avoid searching for the right starting point in a
subtree where all the gaps are too small. Second, when the address
search leads to a tree search for the first large-enough gap, that gap
is the subject of a splay-search that brings the gap to the top of the
tree, so that an immediate insertion will take constant time.
Break up the splay code into separate components, one for searching
and breaking up the tree and another for reassembling it. Use these
components, and not splay itself, for linking and unlinking. Drop the
after-where parameter to link, as it is computed as a side-effect of
the splay search.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: markj
Tested by: pho
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D17794
The declaration in tcp_var.h is still around so t4_tom continued to
compile but wouldn't load. A separate commit will fix tcp_var.h
Reported By: Dustin Marquess (dmarquess at gmail)
Sponsored by: Chelsio Communications
Correct restoring was only attempted for mode 258 (800x600x4 P). (This
was the only useful graphics mode supported in the kernel until 10-15
years ago, and is still the only one explicitly documented in the man
page). The comment says that it is the geometry (subscreen size) that
is restored, but it seems to only be necessary to restore the font
size, with the geometry only needed since it is set by the same ioctl.
The font size was not restored for this mode, but was forced to 16.
For other graphics modes, the font size was clobbered to 0. This
confuses but doesn't crash the kernel (font size 0 gives null text).
This confuses and crashes vidcontrol. The only way to recover was to
use vidcontrol to set the mode to any text mode on the way back to the
original graphics mode.
vidcontrol gets this wrong in the opposite way when backing out of
changes after an error. It restores the font size correctly, but
forces the geometry to the full screen size.
r80270 has the usual wrong fix for unsafe signal handling -- just set
a flag and return to let an event loop check the flag and do safe
handling. This never works for signals like SIGBUS and SIGSEGV that
repeat and works poorly for others unless the application has an event
loop designed to support this.
For these signals, clean up unsafely as before, except for arranging that
nested signals are fatal and forcing a nested signal if the cleanup doesn't
cause one.
method as in /bin/sh.
We still do technically undefined things in the signal handler, but it
is safe in practice to access state that is protected by INTOFF/INTON.
In a recent commit, I sprinkled VGLMouseFrozen++/-- operations in
places that need INTOFF/INTON. This prevented clobbering of pixels
under the mouse, but left mouse signals deferred for too long. It is
necessary to call the signal handler when the count goes to 0. Old
versions did this in the unfreeze function, but didn't block actual
signals, so the signal handler raced itself. The sprinkled operations
reduced the races, but when then worked to block a race they left
signals deferred for too long.
Use INTOFF/INTON to fix complete loss of mouse signals while reading
the mouse status. Clobbering of the state was prevented by SIG_IGN'ing
mouse signals, but that has a high overhead and broke more than it
fixed by losing mouse signals completely. sigprocmask() works to block
signals without losing them completely, but its overhead is also too
high.
libvgl's mouse signal handling is often worse than none. Applications
can't block waiting for a mouse or keyboard or other event, but have
to busy-wait. The SIG_IGN's lost about half of all mouse events while
busy-waiting for mouse events.
allocate_tls_offset returns true on success. The same issue existed
on arm and was fixed in r345693.
PR: 236880
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
allocate_tls_offset returns true on success. This still needs more
testing and review, but this change is consistent with other archs.
PR: 236880
Reported by: Andrew Gierth <andrew@tao11.riddles.org.uk>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Summary:
kexec-lite cannot currently handle multiple PT_LOAD segments. In some
cases the compiler generates multiple PT_LOAD segments for an unknown
reason, causing boot to fail from kexec-lite.
Submitted by: Brandon Bergren (older version)
Differential Revision: https://reviews.freebsd.org/D19574
Summary:
With a sufficiently large TOC, it's possible to index out of range, as
the immediate load instructions only permit 16-bit indices, allowing up
to 64kB range (signed) from the base pointer. Allow +/- 2GB range, with
the medium code model TOC accesses in asm.
Patch originally by Brandon Bergren. The issue appears to impact ELFv2
more than ELFv1.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D19708
fuse(4) was heavily instrumented with debug printf statements that could
only be enabled with compile-time flags. They fell into three basic groups:
1. Totally redundant with dtrace FBT probes. These I deleted.
2. Print textual information, usually error messages. These I converted to
SDT probes of the form fuse:fuse:FILE:trace. They work just like the old
printf statements except they can be enabled at runtime with dtrace. They
can be filtered by FILE and/or by priority.
3. More complicated probes that print detailed information. These I
converted into ad-hoc SDT probes.
Also, de-inline fuse_internal_cache_attrs. It's big enough to be a regular
function, and this way it gets a dtrace FBT probe.
This commit is a merge of r345304, r344914, r344703, and r344664 from
projects/fuse2.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19667
From Jake:
iflib_if_transmit returns ENOBUFS when the device is down, or when the
link isn't active.
This was changed in r308792 from return (0), so that the function
correctly reports an error that it was unable to transmit.
However, using ENOBUFS can cause some network applications to produce
the following or similar errors:
"ping: sendto: No buffer space available"
This is a bit confusing as the real cause of the issue is that the
network device is down.
Replace the ENOBUFS return with ENETDOWN to indicate more clearly that
the reason for the failure to send is due to the network device is
offline.
This will cause the error message to be reported as
"ping: sendto: Network is down"
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, sbruno@, bz@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19652
From Jake:
The iflib_device_register function takes the CTX lock before calling
IFDI_ATTACH_PRE, and releases it upon finishing the registration.
Mirror this process in iflib_pseudo_register, so that we always hold the
CTX lock during the attach process when registering a pseudo interface
or a regular interface.
This was caught by code inspection while attempting to analyze where the
CTX lock was held.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19604
CAM IOCTL interfaces traditionally mapped user-space data buffers to KVA.
It was nice originally, but now it takes too much to handle respective
TLB shootdowns, while small kernel memory allocations up to 64KB backed
by UMA and accompanied by copyin()/copyout() can be much cheaper.
For large buffers mapping still may have sense, and unmapped I/O would
be even better, but the last unfortunately is more tricky, since unmapped
I/O API is too specific to struct bio now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
lagg_bcast_start appeared to have a bug in that was using the last
lagg port structure after exiting the epoch that was keeping that
structure alive. However, upon further inspection, the epoch was
already entered by the caller (lagg_transmit), so the epoch enter/exit
in lagg_bcast_start was actually unnecessary.
This commit generally removes uses of the net epoch via LAGG_RLOCK to
protect the list of ports when the list of ports was already protected
by an existing LAGG_RLOCK in a caller, or the LAGG_XLOCK.
It also adds a missing epoch enter/exit in lagg_snd_tag_alloc while
accessing the lagg port structures. An ifp is still accessed via an
unsafe reference after the epoch is exited, but that is true in the
current code and will be fixed in a future change.
Reviewed by: gallatin
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19718
and use the space to make the "tps" one character longer.
It makes the iostat(8) output a bit less messed up.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D19710
This makes it easier for googletest users to leverage googletest, instead of
forcing them to plug GTEST_CXXFLAGS into CXXFLAGS manually (resulting in
unnecessary duplication).
I will be following this up with a more proper fix in src.libnames.mk, as
src.libnames.mk should be automatically adding this directory to
CFLAGS/CXXFLAGS when private libraries are referenced. Not doing so can result
in mismatches between base-provided private library's and ports-provided
library's headers.
While here, tweak the comment to clarify what the intent is behind spamming
CXXFLAGS.
MFC after: 5 weeks
MFC with: r345203
Reported by: asomers
Reviewed by: asomers
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D19731
It started truncating its color arg to 8 bits using plot() in r229415.
The version in r229415 is also more than 3 times slower in segmented
modes, by doing more syscalls to move the window.
segmented modes.
Also fix some style bugs in the 2 changed lines. libvgl uses a very non-KNF
style with 2-column indentation with no tabs except for regressions.
Highlights:
- Bugfix for order in which /delete-node/ and /delete-property/ are
processed [0]
- /omit-if-no-ref/ support has been added (used only by U-Boot at this
point, in theory)
- GPL dtc compat version bumped to 1.4.7
- Various small fixes and compatibility improvements
Reported by: strejda [0]
MFC after: 1 week
Consider a bridge0 with em0 and em1 members. Traffic rx'd by em0 and
transmitted by bridge0 through em1 gets accounted for in IPACKETS/IBYTES
and bridge0 bpf -- assuming it's not unicast traffic destined for em1.
Unicast traffic destined for em1 traffic is not accounted for by any
mechanism, and isn't pushed through bridge0's bpf machinery as any other
packets that pass over the bridge do.
Fix this and simplify GRAB_OUR_PACKETS by bailing out early if it was rx'd
by the interface that it was addressed for. Everything else there is
relevant for any traffic that came in from one member that's being directed
at another member of the bridge.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19614
r345620 by kib@ fixed the rtld issue that caused a crash at startup
during resolution of libc's ifuncs with BIND_NOW.
PR: 233333
Sponsored by: The FreeBSD Foundation
It looks like some DIMMs claim to have a TSOD, but actually don't. Some
claim they weren't able to change the SPD page, but they did. Neither of
those should be fatal errors.
PR: 235944
Submitted by: Greg V <greg@unrelenting.technology>
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: cem
MFC after: 1 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D19681
r322369's use of basename(3) was incorrect and worked by accident so
long as the pidfile path was absolute or consisted of a single
component. Fix the basename() usage and add a regression test.
Reported by: 0mp
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19728
We were doing so as a workaround for the problem addressed by r345593, so
it's no longer necessary.
Reviewed by: jhb
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19705
Relative directories may appear in the line number program for a CPU if
files were included via a relative path, for instance with "-I.".
Previously, dwarf_srclines(3) and dwarf_srcfiles(3) would return the
relative path, so addr2line, for instance, would do the same. However,
we can get an absolute path by prepending the compilation directory, so
change libdwarf to do that to improve compatibility with GNU binutils
and since it is more useful in general.
Reviewed by: jhb
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19705
Reading of single pixels didn't look under the cursor.
Copying of 1x1 bitmaps didn't look under the cursor for either reading
or writing.
Copying of larger bitmaps looked under the cursor for at most the
destination.
Copying of larger bitmaps looked under a garbage cursor (for the Display
bitmap) when the destination is a MEMBUF. The results are not used, so
this only wasted time and flickered the cursor.
Writing of single pixels looked under a garbage cursor for MEMBUF
destinations, as above except this clobbered the current cursor and
didn't update the MEMBUF. Writing of single pixels is not implemented
yet in depths > 8. Otherwise, writing of single pixels worked. It was
the only working case for accessing pixels under the cursor.
Clearing of MEMBUFs wasted time freezing the cursor in the Display bitmap.
The fixes abuse the top bits in the color arg to the cursor freezing
function to control the function. Also clear the top 8 bits so that
applications can't clobber the control bits or create 256 aliases for
every 24-bit pixel value in depth 32.
Races fixed:
Showing and hiding the cursor only tried to avoid races with the mouse
event signal handler for internal operations. There are still many
shorter races from not using volatile or sig_atomic_t for the variable
to control this. This variable also controls freezes, and has more
complicated states than before.
The internal operation of unfreezing the cursor opened a race window
by unsetting the signal/freeze variable before showing the cursor.
RISC-V timer has no dedicated DTS node and we have to get timer
frequency from cpus node.
Tested on Government Furnished Equipment (GFE) cores synthesized
on Xilinx VCU118.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19727
