Get rid of unused 'svm_feature' from the softc.
Get rid of the redundant 'vcpu_cnt' checks in svm.c. There is a similar check
in vmm.c against 'vm->active_cpus' before the AMD-specific code is called.
Submitted by: Anish Gupta (akgupt3@gmail.com)
processor. Briefly, the hypervisor sets V_INTR_VECTOR to the APIC vector
and sets V_IRQ to 1 to indicate a pending interrupt. The hardware then takes
care of injecting this vector when the guest is able to receive it.
Legacy PIC interrupts are still delivered via the event injection mechanism.
This is because the vector injected by the PIC must reflect the state of its
pins at the time the CPU is ready to accept the interrupt.
Accesses to the TPR via %CR8 are handled entirely in hardware. This requires
that the emulated TPR must be synced to V_TPR after a #VMEXIT.
The guest can also modify the TPR via the memory mapped APIC. This requires
that the V_TPR must be synced with the emulated TPR before a VMRUN.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
- Don't enable the HLT intercept by default. It will be enabled by bhyve(8)
if required. Prior to this change HLT exiting was always enabled making
the "-H" option to bhyve(8) meaningless.
- Recognize a VM exit triggered by a non-maskable interrupt. Prior to this
change the exit would be punted to userspace and the virtual machine would
terminate.
instruction bytes in the VMCB on a nested page fault. This is useful because
it saves having to walk the guest page tables to fetch the instruction.
vie_init() now takes two additional parameters 'inst_bytes' and 'inst_len'
that map directly to 'vie->inst[]' and 'vie->num_valid'.
The instruction emulation handler skips calling 'vmm_fetch_instruction()'
if 'vie->num_valid' is non-zero.
The use of this capability can be turned off by setting the sysctl/tunable
'hw.vmm.svm.disable_npf_assist' to '1'.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Discussed with: grehan
window exiting. This simply involves setting V_IRQ and enabling the VINTR
intercept. This instructs the CPU to trap back into the hypervisor as soon
as an interrupt can be injected into the guest. The pending interrupt is
then injected via the traditional event injection mechanism.
Rework vcpu interrupt injection so that Linux guests now idle with host cpu
utilization close to 0%.
Reviewed by: Anish Gupta (earlier version)
Discussed with: grehan
Provide APIs svm_enable_intercept()/svm_disable_intercept() to add/delete
VMCB intercepts. These APIs ensure that the VMCB state cache is invalidated
when intercepts are modified.
Each intercept is identified as a (index,bitmask) tuple. For e.g., the
VINTR intercept is identified as (VMCB_CTRL1_INTCPT,VMCB_INTCPT_VINTR).
The first 20 bytes in control area that are used to enable intercepts
are represented as 'uint32_t intercept[5]' in 'struct vmcb_ctrl'.
Modify svm_setcap() and svm_getcap() to use the new APIs.
Discussed with: Anish Gupta (akgupt3@gmail.com)
Prior to this change an ASID was hard allocated to a guest and shared by all
its vcpus. The meant that the number of VMs that could be created was limited
to the number of ASIDs supported by the CPU. It was also inefficient because
it forced a TLB flush on every VMRUN.
With this change the number of guests that can be created is independent of
the number of available ASIDs. Also, the TLB is flushed only when a new ASID
is allocated.
Discussed with: grehan
Reviewed by: Anish Gupta (akgupt3@gmail.com)
function restore_host_tss().
Don't bother to restore MSR_KGSBASE after a #VMEXIT since it is not used in
the kernel. It will be restored on return to userspace.
Discussed with: Anish Gupta (akgupt3@gmail.com)
shadow, so move the check for pending exception before bailing out due to
an interrupt shadow.
Change return type of 'vmcb_eventinject()' to a void and convert all error
returns into KASSERTs.
Fix VMCB_EXITINTINFO_EC(x) and VMCB_EXITINTINFO_TYPE(x) to do the shift
before masking the result.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
work. This gets my AT91SAM9260-based boards almost booting with
current in multi pass. The MCI driver is broken, but it is equally
broken before multi-pass.
By Richard Earnshaw at ARM
>
>GCC has for a number of years provides a set of pre-defined macros for
>use with determining the ISA and features of the target during
>pre-processing. However, the design was always somewhat cumbersome in
>that each new architecture revision created a new define and then
>removed the previous one. This meant that it was necessary to keep
>updating the support code simply to recognise a new architecture being
>added.
>
>The ACLE specification (ARM C Language Extentions)
>(http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.set.swdev/index.html)
>provides a much more suitable interface and GCC has supported this
>since gcc-4.8.
>
>This patch makes use of the ACLE pre-defines to map to the internal
>feature definitions. To support older versions of GCC a compatibility
>header is provided that maps the traditional pre-defines onto the new
>ACLE ones.
Stop using __FreeBSD_ARCH_armv6__ and switch to __ARM_ARCH >= 6 in the
couple of places in tree. clang already implements ACLE. Add a define
that says we implement version 1.1, even though the implementation
isn't quite complete.
Microsoft recommends avoiding the use of spaces in the
string structures for FAT. Unfortunately they do just
that by default in the case of unlabeled filesystems.
Follow the default MS behavior to avoid confusion in
common tools like file(1). This was actually the
default behavior before r203868.
Obtained from: NetBSD (CVS rev. 1.39)
MFC after: 3 days
the first argument of the following builtin function:
* __builtin_ia32_psrlqi128() takes __v2di instead of __v4si
This should fix the following errors when building the graphics/webp
port with base gcc:
lossless_sse2.c:403: error: incompatible type for argument 1 of '__builtin_ia32_psrlqi128'
lossless_sse2.c:404: error: incompatible type for argument 1 of '__builtin_ia32_psrlqi128'
Reported by: Jos Chrispijn <ports@webrz.net>
MFC after: 3 days
socket options. This includes managing the correspoing stat counters.
Add the SCTP_DETAILED_STR_STATS kernel option to control per policy
counters on every stream. The default is off and only an aggregated
counter is available. This is sufficient for the RTCWeb usecase.
MFC after: 1 week
the whole RLIMIT_STACK-sized region of the kernel-allocated stack as
the stack of main thread.
By default, the main thread stack is clamped at 2MB (4MB on 64bit
ABIs) and the rest is used for other threads stack allocation. Since
there is no programmatic way to adjust the size of the main thread
stack, pthread_attr_setstacksize() is too late, the knob allows user
to manage the main stack size both for single-threaded and
multi-threaded processes with the rlimit.
Reported by: "Ivan A. Kosarev" <ivan@ivan-labs.com>
Tested by: dim
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
page queue even when the allocation is not wired. It is
responsibility of the vm_page_grab() caller to ensure that the page
does not end on the vm_object queue but not on the pagedaemon queue,
which would effectively create unpageable unwired page.
In exec_map_first_page() and vm_imgact_hold_page(), activate the page
immediately after unbusying it, to avoid leak.
In the uiomove_object_page(), deactivate page before the object is
unlocked. There is no leak, since the page is deactivated after
uiomove_fromphys() finished. But allowing non-queued non-wired page
in the unlocked object queue makes it impossible to assert that leak
does not happen in other places.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Remove the .t wrappers
Rename all of the TAP test applications from test-<test> to
<test>_test to match the convention described in the TestSuite
wiki page
humanize_number_test.c:
- Fix -Wformat warnings with counter variables
- Fix minor style(9) issues:
-- Header sorting
-- Variable declaration alignment/sorting in main(..)
-- Fit the lines in <80 columns
- Fix an off by one index error in the testcase output [*]
- Remove unnecessary `extern char * optarg;` (this is already provided by
unistd.h)
Phabric: D555
Approved by: jmmv (mentor)
MFC after: 2 weeks
Obtained from: EMC / Isilon Storage Division [*]
Submitted by: Casey Peel <cpeel@isilon.com> [*]
Sponsored by: EMC / Isilon Storage Division
The new code uses a "test discovery mechanism" to determine
what tests are available for execution
The test shell can be specified via:
kyua test -v test_suites.FreeBSD.bin.sh.test_shell=/path/to/test/sh
Sponsored by: EMC / Isilon Storage Division
Approved by: jmmv (mentor)
Reviewed by: jilles (maintainer)
the build starts.
This adds a new variable DHDRS that contains a list of all DTrace
header files. Then, we use the beforedepend hook to make sure the
heaeder files are built.
Introduce a beforebuild dependency (from projects/bmake) based on
feedback from Simon J. Gerraty. This lets us generate the header
files without running make depend.
Reviewed by: sjg, imp
MFC after: 3 days