in6_selectsrc() has 2 class of users: socket-based one (raw/udp/pcb/etc) and
socket-less (ND code). The main reason for that change is inability to
specify non-default FIB for callers w/o socket since (internally) inpcb
is used to determine fib.
As as result, add 2 wrappers for in6_selectsrc() (making in6_selectsrc()
static):
1) in6_selectsrc_socket() for the former class. Embed scope_ambiguous check
along with returning hop limit when needed.
2) in6_selectsrc_addr() for the latter case. Add 'fibnum' argument and
pass IPv6 address w/ explicitly specified scope as separate argument.
Reviewed by: ae (previous version)
compiled into the kernel. Ideally lots more code would just not
be called (or compiled in) in that case but that requires a lot
more surgery. For now try to make IP-less kernels compile again.
- Add a conf.sh file for executing common functions with geom_gate
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
- Add/increase sleeps to try and improve synchronization
- Add debug output for when checksums fail
test-1.t:
- Use pkill for killing ggated
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
When called to early, new_currdev->d_type was not yet set
zfs_fmtdev() would then return null
While here, guard call to init_zfs_bootenv with if d_type == DEVT_ZFS
Reported by: tsoome at me.com
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
The only piece of information that is required is rt_flags subset.
In particular, if_loop() requires RTF_REJECT and RTF_BLACKHOLE flags
to check if this particular mbuf needs to be dropped (and what
error should be returned).
Note that if_loop() will always return EHOSTUNREACH for "reject" routes
regardless of RTF_HOST flag existence. This is due to upcoming routing
changes where RTF_HOST value won't be available as lookup result.
All other functions require RTF_GATEWAY flag to check if they need
to return EHOSTUNREACH instead of EHOSTDOWN error.
There are 11 places where non-zero 'struct route' is passed to if_output().
For most of the callers (forwarding, bpf, arp) does not care about exact
error value. In fact, the only place where this result is propagated
is ip_output(). (ip6_output() passes NULL route to nd6_output_ifp()).
Given that, add 3 new 'struct route' flags (RT_REJECT, RT_BLACKHOLE and
RT_IS_GW) and inline function (rt_update_ro_flags()) to copy necessary
rte flags to ro_flags. Call this function in ip_output() after looking up/
verifying rte.
Reviewed by: ae
- Avoid namespace pollution and move definitions of _POSIX2_CHARCLASS_NAME_MAX
and _POSIX2_COLL_WEIGHTS_MAX into the .2001 section.
With input from bde.
Submitted by bde
This check was added in initial? netinet6/ import
back in 1999 (r53541).
It effectively became unnecessary after 'address/prefix clean-ups'
KAME commit 90ff8792e676132096a440dd787f99a5a5860ee8 (github) in 2001
(merged to FreeBSD in r78064) where prefix check was added to
nd6_prefix_onlink(). Similar IPv4 check (in_addroute() was added
in r137628).
Additionally, the right plance for this (or similar) check is the prefix
addition code (nd6_prefix_onlink(), nd6_prefix_onlink_rtrequest(),
in_addprefix() or rtinit()), but not the generic radix insert routine.
Such handler should pass different set of variables, instead
of directly providing 2 locked route entries.
Given that it hasn't been really used since at least 2012, remove
current code.
Will re-add it after finishing most major routing-related changes.
Discussed with: np
Remove the printf("Not ufs\n") from the boot code which was hidden by the
local printf implementations, allowing these to have that code removed too.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
ARM and i386 already required libstand so switch to using it for all
patforms, allowing the removal of custom print and memory methods.
This is also a pre-cursor to enabling WARNS which highlighted a number
of issues with the removed methods.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
r282971 attempted to fix this problem by decrementing cv_waiters after
waking up from sleeping on a condition variable, but this can result in
a use-after-free if the CV is freed before all woken threads have had a
chance to run. Instead, avoid incrementing cv_waiters past INT_MAX, and
have cv_signal() explicitly check for sleeping threads once cv_waiters has
reached this bound.
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4822
Add a few other safeguards to ensure things do not break when the
boot device cannot be determined
Reported by: flo
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
when re-using build chroot(8) environments.
This is based on the patch in the PR referenced below, but instead
of using 'reinstall' in two locations (one of which already uses
FORCE_PKG_REGISTER=1), changes the non-embedded behavior.
PR: 205998
Submitted by: ngie
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
It is built in libgcc_s.so and libgcc_eh.a to simplify transition.
It is enabled by default on arm64 (where we previously had no other
unwinder) and may be enabled for testing on other platforms by setting
WITH_LLVM_LIBUNWIND in src.conf(5).
Also add compiler-rt's __gcc_personality_v0 implementation for use with
the LLVM unwinder.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4787
(geom_test_cleanup, etc) down so the testcases don't emit noise when
bailing
- Conform to the TAP protocol better when dealing with classes that can't
be loaded and with temporary files that can't be allocated for tracking
md(4) devices.
MFC after: 2 weeks
X-MFC with: r293028, r293029, r293048
Sponsored by: EMC / Isilon Storage Division
- Delete test-2.sh as it was an incomplete testcase, and the contents were
basically a subset of test-1.sh
- Add a conf.sh file for executing common functions with geom_uzip
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
r288829 states that lex requires the latest m4, but was not always building it.
Move lex to the same logic as m4 since they are closely tied now.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Reported by: Slawa Olhovchenkov <slw@zxy.spb.ru>
up to now.
The new sendfile is the code that Netflix uses to send their multiple tens
of gigabits of data per second. The new implementation features asynchronous
I/O, when I/O operations are launched, but not awaited to be complete. An
explanation of why such behavior is beneficial compared to old one is
going to be too long for a commit message, so we will skip it here.
Additional features of new syscall are extra flags, which provide an
application more control over data sent. The SF_NOCACHE flag tells
kernel that data shouldn't be cached after it was sent. The SF_READAHEAD()
macro allows to specify readahead size in pages.
The new syscalls is a drop in replacement. No modifications are required
to applications. One can take nginx binary for stable/10 and run it
successfully on head. Although SF_NODISKIO lost its original sense, as now
sendfile doesn't block, and now means something completely different (tm),
using the new sendfile the old way is absolutely safe.
Celebrates: Netflix global launch!
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
Relnotes: yes
exit so things are cleaned up properly
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
-- Use linear probing to find the first unique md(4) device, unlike the other
code which uses attach_md, as geli(8) allocates the md(4) devices itself
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Userboot's copy of the libstand Makefile had more extensive changes
compared to the one in sys/boot/libstand32, but it turns out these are
not intentional and we can just include lib/libstand/Makefile as done
for libstand32 in r293040.
Reviewed by: imp, jhb
Tested by: allanjude
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4793
- Add a geom_concat specific cleanup function and trap on that function at
exit so things are cleaned up properly
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
sbappendstream() does. Although, M_NOTREADY may appear only on SOCK_STREAM
sockets, due to sendfile(2) supporting only the latter, there is a corner
case of AF_UNIX/SOCK_STREAM socket, that still uses records for the sake
of control data, albeit being stream socket.
Provide private version of m_clrprotoflags(), which understands PRUS_NOTREADY,
similar to m_demote().
