Also use __DEFAULT_DEPENDENT_OPTIONS for options that
generally depend on META_MODE.
Deal with MK_META_MODE and MK_AUTO_OBJ directly.
Also allow MK_META_FILES if no -B
this is very handy for getting meta files from say buildworld
By moving META_MODE bits from local.sys.mk, they are easier
to skip when MK_META_MODE=no
Update some filters to cope with sync from head.
If buildworld etc or WITHOUT_META_MODE disable all the META_MODE
related options.
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 weeks
Causually read by: gnn
Differential Revision: https://reviews.freebsd.org/D2618
r283105 misspelled kern_psignal as kernel_psignal in one occurrence, and
added trailing whitespace.
While here, change 'call' to the more standard 'function', and say why
the name was changed (taken from the commit message for r225617).
The menu entry "Danish ISO-8859-1 (macbook)" was first added to the
syscons(4) INDEX.keymaps in r241851 with no language code, and then in
r256367 incorrectly tagged with "da". It is a Danish keyboard map, but
the description is in English and therefore must be "en".
This error subsequently propagated into the vt(4) INDEX.keymaps.
PR: 146793, 193656
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
interacts with interrupts, query ACPI and use MWAIT for entrance into
Cx sleep states. Support C1 "I/O then halt" mode. See Intel'
document 302223-007 "Intelб╝ Processor Vendor-Specific ACPI Interface
Specification" for description.
Move the acpi_cpu_c1() function into x86/cpu_machdep.c and use
it instead of inlining "sti; hlt" sequence in several places.
In the acpi(4) man page, besides documenting the dev.cpu.N.cx_methods
sysctl, correct the names for dev.cpu.N.{cx_usage,cx_lowest,cx_supported}
sysctls.
Both jkim and avg have some other patches implementing the mwait
functionality; this work is unrelated. Linux does not rely on the
ACPI to provide correct tables describing Cx modes. Instead, the
driver has pre-defined knowledge of the CPU models, it was supplied by
Intel.
Tested by: pho (previous versions)
Sponsored by: The FreeBSD Foundation
Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
It is truer to the semantics of logging for messages to *always*
go to the message buffer, where they can eventually be collected
and, in fact, be put into a log file.
This restores the behavior prior to r70239, which seems to have
changed it inadvertently.
Submitted by: Eric Badger <eric@badgerio.us>
Reviewed by: jhb
Approved by: kib (mentor)
Obtained from: Dell Inc.
MFC after: 1 week
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
waitid() function is required to be cancellable by the standard. The
wait6() and ppoll() follow the other syscalls in their groups.
Reviewed by: jhb, jilles (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The format of these pages is somewhat experimental, so they may be subject
to further tweaking.
Differential Revision: https://reviews.freebsd.org/D2170
Reviewed by: bcr, rpaulo
MFC after: 2 weeks
Add examples demonstrating how one can list available providers and the
DTrace probes provided by a provider.
Differential Revision: https://reviews.freebsd.org/D2166
Reviewed by: rpaulo
MFC after: 2 weeks
case
Repro is as follows:
% sudo pkg install -y kyua
% sudo rm -Rf /usr/tests
% sudo make hier
% (cd lib/libthr/tests/; make obj; make depend; make all; sudo make install)
% (cd /usr/tests/lib/libthr; kyua list)
Failure seen in Jenkins build starting here:
https://jenkins.freebsd.org/job/FreeBSD_HEAD-tests2/927/
Pointyhat to: bapt
Consumers should not need to encode fifolog's dependency on libz.
Handle it automatically in src.libnames.mk.
Differential Revision: https://reviews.freebsd.org/D2278
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
While here fix missing link to libbsdxml for libmt
Fix overlinking in mt(1)
Make add an indirect libmt dependency on bsdxml to allow static linking if
needed
It actually doesn't - "device ctl" automatically pulls in ICL, which
would normally be a part of iscsi.ko. However, doing it that way makes
iscsi.ko unloadable, and building ctl.ko without iscsi.ko (using
MODULES_OVERRIDE) results in ctl.ko that is unloadable, due to missing
symbols that would be resolved to iscsi.ko. And since the symbols
are named "icl_whatever", it's not obvious that it's iscsi.ko that's
required.
If there is a better way - let me know.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
to dtrace(1) invocations during a build. This change includes -C in the
default flags, which has dtrace(1) run input scripts through the
preprocessor. While here, sort the definitions of CP and CPP in sys.mk.
Differential Revision: https://reviews.freebsd.org/D2204
Reviewed by: imp, rpaulo (previous revision)
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
where we want to create a new IP datagram.
o Add support for RFC6864, which allows to set IP ID for atomic IP
datagrams to any value, to improve performance. The behaviour is
controlled by net.inet.ip.rfc6864 sysctl knob, which is enabled by
default.
o In case if we generate IP ID, use counter(9) to improve performance.
o Gather all code related to IP ID into ip_id.c.
Differential Revision: https://reviews.freebsd.org/D2177
Reviewed by: adrian, cy, rpaulo
Tested by: Emeric POUPON <emeric.poupon stormshield.eu>
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Relnotes: yes
Use list for the cancellation points enumeration. Move notes about
functions into the list inline.
The discussion of the idiomatic use of cancellation facilities does
not belong to RETURN VALUES section, move it to NOTES.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Note that to cancel blocked kevent(2) call, changelist must be empty,
since we cannot cancel a call which already made changes to the
process state. And in reverse, call which only makes changes to the
kqueue state, without waiting for an event, is not cancellable. This
makes a natural usage model to migrate kqueue loop to support
cancellation, where existing single kevent(2) call must be split into
two: first uncancellable update of kqueue, then cancellable wait for
events.
Note that this is ABI-incompatible change, but it is believed that
there is no cancel-safe code that relies on kevent(2) not being a
cancellation point. Option to preserve the ABI would be to keep
kevent(2) as is, but add new call with flags to specify cancellation
behaviour, which only value seems to add complications.
Suggested and reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
__ALWAYS_NO_OPTIONS are forced to "no" regardless of other settings.
Differential Revision: https://reviews.freebsd.org/D2011
In particular, this allows an administrator to specify "-h" for human
readable output if that is preferred.
The default setting passes "-d", so that can be excluded by using a custom
setting.
Differential Revision: https://reviews.freebsd.org/D2034
Submitted by: Lystopad Aleksandr <laa@laa.zp.ua>
(patch to add option for -h)
Reviewed by: bz
MFC after: 1 week
(this has to be passed as a combination of two flags). Should fix the
case where the clang version is before 3.5.0.
Submitted by: Pedro Arthur <bygrandao@gmail.com>
X-MFC-With: r279018, r279378
Many thanks to ian who gently provided me the DS1307 breakout board.
Tested on: Raspberry pi
Differential Revision: https://reviews.freebsd.org/D2022
Reviewed by: rpaulo
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This fixes C++ libraries not implicitly linking in libc++. This is
generally not an issue because the final linking with the compiled binary
will involve CXX via PROG_CXX or other means. It is however
inconsistent with libraries implicitly linking in libc and problematic
for trying to build libraries with '-z defs' to ensure all direct
dependencies are linked in.
libatf-c++ is currently the only consumer of this new feature.
Differential Revision: https://reviews.freebsd.org/D2039
Reviewed by: imp
Discussed with: bapt
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The compilation lines are not hidden and there is not much reason to
hide the linker line. It is useful to see.
Discussed at: https://reviews.freebsd.org/D2039
MFC after: 2 weeks
Using multi variable for loop not only simplify the code, it also ensures that
the LINKS and SYMLINKS input have the right number of words
Differential Revision: https://reviews.freebsd.org/D2069
Reviewed by: imp
The SBUF_INCLUDENUL flag causes the nulterm byte at the end of the string
to be counted in the length of the data. If copying the data using the
sbuf_data() and sbuf_len() functions, or if writing it automatically with
a drain function, the net effect is that the nulterm byte is copied along
with the rest of the data.
which includes more than one file with the same name, in different
directories.
For example, setting:
SRCS+= foo/foo.c bar/foo.c baz/foo.c
will now create separate objdirs 'foo', 'bar' and 'baz' for each of the
sources in the list, and use those objdirs for the corresponding object
files.
Reviewed by: brooks, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D1984
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
BROKEN_OPTIONS are forced to "no" regardless of other settings.
Clients are expected change BROKEN_OPTIONS with +=. It will not
be unset, so other parts of the build system can have visibility
into the options that are broken on this platform, though this
should be very rare.
Differential Revision: https://reviews.freebsd.org/D2009
module component, it is a bug that the SDT(9) KPI allows one to specify the
function component of an SDT probe. Currently, the module component is
filled in automatically if left unset; this is not yet true for the function
component, but will be addressed by some ongoing work.
MFC after: 3 days
in kern_gzio.c. The old gzio interface was somewhat inflexible and has not
worked properly since r272535: currently, the gzio functions are called with
a range lock held on the output vnode, but kern_gzio.c does not pass the
IO_RANGELOCKED flag to vn_rdwr() calls, resulting in deadlock when vn_rdwr()
attempts to reacquire the range lock. Moreover, the new gzio interface can
be used to implement kernel core compression.
This change also modifies the kernel configuration options needed to enable
userland core dump compression support: gzio is now an option rather than a
device, and the COMPRESS_USER_CORES option is removed. Core dump compression
is enabled using the kern.compress_user_cores sysctl/tunable.
Differential Revision: https://reviews.freebsd.org/D1832
Reviewed by: rpaulo
Discussed with: kib
I2C real-time clock (RTC).
The DS3231 has an integrated temperature-compensated crystal oscillator
(TXCO) and crystal.
DS3231 has a temperature sensor, an independent 32kHz output (which can be
turned on and off by the driver) and another output that can be used as
interrupt for alarms or as a second square-wave output, which frequency and
operation mode can be set by driver sysctl(8) knobs.
Differential Revision: https://reviews.freebsd.org/D1016
Reviewed by: ian, rpaulo
Tested on: Raspberry pi model B
libgeom do so successfully
Tested by running `geom part list` produced from a -DWITHOUT_DYNAMICROOT built
world
PR: 198078
Reported by: Eir Nym <eirnym@gmail.com>
replace it with the absolute path of .PARSEDIR, so that sub-makes
launched from objdirs (eg kernel) can still find the correct mk files.
Reviewed by: obrien
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
probes to userland programs and libraries without also needing to link
libelf.
dtrace -G places the __SUNW_dof symbol at the beginning of the DOF (DTrace
probe and provider metdata) section in the generated object file; drti.o
now just uses this symbol to locate the section. A complication occurs
when multiple dtrace-generated object files are linked together, since the
__SUNW_dof symbol defined in each file is global. This is handled by
using objcopy(1) to convert __SUNW_dof to a local symbol once drti.o has
been linked with the generated object file. Upstream, this is done using a
linker feature not present in GNU ld.
Differential Revision: https://reviews.freebsd.org/D1757
Reviewed by: rpaulo
MFC after: 1 month
Relnotes: yes
libarchive(3) doesn't support the new liblzma API yet, but this change
allows us to enable multi-threaded xz compression.
``make release'' should now finish in half the time on a machine with
several cores and fast disks (our typical build server).
This behaviour only applies when building a release and it doesn't
affect buildworld/installworld. To disable threaded xz compression,
set XZ_THREADS=1.
Reviewed by: gjb
Tested by: gjb
has been removed and the driver has been greatly simplified and
optimised for FreeBSD. The driver is currently not built by default.
Requested by: Bruce Simpson <bms@fastmail.net>
SHLIB_NAME_FULL so that the full binary is relinked when a dependency
changes. Right now the existing full binary is left as-is and only
the objcopy to remove debug symbols is run.
Differential Revision: https://reviews.freebsd.org/D1834
Reviewed by: emaste
MFC after: 3 days
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
This brings support for multi-threaded compression. This brings close
N times faster compression where N is the number of CPU cores.
Because of this, liblzma now depends on libthr.
Soon libarchive will be modified to use the new lzma API.
Thanks to antoine@ for the exp-run.
Differential Revision: https://reviews.freebsd.org/D1786
Reviewed by: bapt
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
Add separate software Tx queue limit for non-TCP traffic to make total
limit higher and avoid local drops of TCP packets because of no
backpressure.
There is no point to make non-TCP limit high since without backpressure
UDP stream easily overflows any sensible limit.
Split early drops statistics since it is better to have separate counter
for each drop reason to make it unabmiguous.
Add software Tx queue high watermark. The information is very useful to
understand how big queues grow under traffic load.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
__attribute__((format(...))), and the -fformat-extensions flag was
removed, introduce a new macro in bsd.sys.mk to choose the right variant
of compile flag for the used compiler, and use it.
Also add something similar to kern.mk, since including bsd.sys.mk from
that file will anger Warner. :-)
Note that bsd.sys.mk does not support the MK_FORMAT_EXTENSIONS knob used
in kern.mk, since that knob is only available in kern.opts.mk, not in
src.opts.mk. We might want to add it later, to more easily support
external compilers for building world (in particular, sys/boot).
triggers way too many times for the version of libc++ we have in base at
this point. While here, fix the compiler version check for
-Wno-unused-const-variable.
This helps to reduce code size in statically linked applications.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 2 weeks
The core kernel part is patch file utimes.2008.4.diff from
pluknet@FreeBSD.org. I updated the code for API changes, added the manual
page and added compatibility code for old kernels. There is also audit and
Capsicum support.
A new UTIME_* constant might allow setting birthtimes in future.
Differential Revision: https://reviews.freebsd.org/D1426
Submitted by: pluknet (partially)
Reviewed by: delphij, pluknet, rwatson
Relnotes: yes
in bitfield argument is wrong, as it will be treated as bit 10, causing any
code printing >=10 bits with bit 10 on as having a trailing comma.
Newline (intended one) should be part of the format string (already present
in the examples).
Also fix grammar and kill EOL whitespace in comment while here.
PR: 195005
Approved by: bdrewery
FreeBSD developers need more time to review patches in the surrounding
areas like the TCP stack which are using MPSAFE callouts to restore
distribution of callouts on multiple CPUs.
Bump the __FreeBSD_version instead of reverting it.
Suggested by: kmacy, adrian, glebius and kib
Differential Revision: https://reviews.freebsd.org/D1438
r273823-r273826, r273833, r273836, r273944, r274069-r274071,
r274134, r274211, r274280-r274285, r274287-r274288, r274292,
r274296-r274297, r274356, r274533, r274725, r274726, r274729,
r274734, r274771, r274945-r274946, r277180, r277183-r277184,
r277186-r277187, r277250-r277253, r277263-r277264, r277383-r277384,
r277393-r277395, r277438-r277439, r277447, r277455:
r273823:
Move virtual machine / cloud provider targets and
options from release/Makefile to their own Makefile.
r273824:
Add glue to allow enabling building cloud provider VM images
by default.
When WITH_CLOUDWARE is not empty, add CLOUDTARGETS to the
release/Makefile 'release' target.
r273825:
Avoid hard-coding the Azure image file format. While here,
avoid using OSRELEASE for the output file name.
r273826:
Remove a few vestiges of passing an exit code to panic().
r273833:
Initial commit providing a mechanism to create openstack images
as part of the release build.
r273836:
Fix output file name for openstack images. No further conversion
is necessary for this VM file target, so there is no need to append
the '.raw' suffix here.
r273944:
Uncomment the cloudinit rc.conf(5) line.
r274069:
Add line continuation so OPENSTACKCONF is actually included in the env(1).
r274070:
Add a 'vm-cloudware' target, used to drive all targets in CLOUDTARGETS.
r274071:
Add examples for WITH_CLOUDWARE to release.conf.sample.
Add WITH_CLOUDWARE evaluation to RELEASE_RMAKEFLAGS.
r274134:
Initial rewrite to consolidate VM image build scripts into one.
r274211:
Add write_partition_layout() used to populate the final image.
Fix duplicated mkimg(1) call in vm_create_disk().
Add primitive (untested) PowerPC/PowerPC64 VM image support.
Note: As it is currently written, the /boot/pmbr and
/boot/{gptboot,boot1.hfs} use the build host and not the target
build. Fixing this is likely going to be a hack in itself.
r274280:
Return if vm_create_disk() is unsuccessful.
r274281:
Add CLEANFILES entry for VM targets
r274282:
Add vm_extra_pre_umount() prototype to vmimage.subr.
r274283:
Fix DESTDIR for installworld, and make sure it is created before use.
r274284:
Move usage() from vmimage.subr to mk-vmimage.sh, in case vmimage.subr
has not been sourced.
r274285:
Spell 'OPTARG' correctly. Actually call vm_create_base().
r274287:
Fix line continuation in write_partition_layout().
Remove variable test that is no longer needed.
r274288:
Fix scheme flag to mkimg(1).
r274292:
mount(8) and umount(8) devfs(5) as needed.
r274296:
Change path for mk-vmimage.sh from ${TARGET}/ to scripts/ now that
it is consolidated into one file.
Fix paths for the base image and output disk image files.
r274297:
Call cleanup() after everything is done.
r274356:
Remove a stray directory from CLEANFILES.
r274533:
Set the boot partition type to 'apple-boot' for powerpc.
r274725:
In vm_install_base(), copy the host resolv.conf into
the build chroot before attempting to do anything that
requires working DNS (i.e., pkg bootstrap).
In vm_extra_pre_umount(), remove the resolv.conf before
the disk image is unmounted from the backing md(4).
r274726 (cperciva):
Silence errors when umounting the chroot's /dev, since it
probably doesn't exist when we're running this.
Unmount filesystems before attempting to destroy the md which
holds them.
r274729 (cperciva):
Unmount filesystem and destroy md before we read the vnode from
disk and package it into a disk image. Otherwise we end up
packaging an unclean filesystem.
r274734 (cperciva):
Merge duplicative vm-CLOUDTYPE targets before additional duplication
gets added by the impending arrival of ec2 and gcloud.
r274771 (cperciva):
Add NOSWAP option which can be set by a vmimage.conf file to specify
that no swap space should be created in the image. This will be used
by EC2 builds, since FreeBSD/EC2 allocates swap space on "ephemeral"
disks which are physically attached to the Xen host node.
r274945:
In vm_extra_install_packages(), only bootstrap pkg(8) if
VM_EXTRA_PACKAGES is empty.
In vm_extra_pre_umount(), cleanup downloaded packages if pkg(8) was
bootstrapped earlier.
r274946:
Fix indentation nit.
r277180:
In vm_extra_install_base(), do not install waagent in the openstack
image, because it is not used. This appears to be a copy mistake.
Remove vm_extra_install_base() from the openstack.conf entirely,
since it does not need to be overridden.
r277183:
Enable the textmode console by default for VM images, since there is
no way to tell if the environment will be able to use the
graphics-mode console.
r277184:
Enable password-less sudo for openstack images.
r277186:
Update the VM_EXTRA_PACKAGES list for the openstack images.
The documentation suggests doing a "just fetch this and run it"-style
bootstrap, from which the list of dependencies was obtained (in
github, at: pellaeon/bsd-cloudinit-installer)
There is one Python dependency unmet, oslo.config, which is not in
the Ports Collection.
r277187:
Add a comment to note that setting hw.vga.textmode=1 is temporary.
r277250:
Remove vm_extra_install_base() for the Azure image, now that the
waagent exists in the ports tree.
Add sysutils/azure-agent to the VM_EXTRA_PACKAGES list.
In vm_extra_pre_umount(), remove the explicit pkg(8) install
list, as dependencies are resolved by sysutils/azure-agent.
r277251:
Add a 'list-cloudware' target to print the list of supported CLOUDWARE
values and a description.
Add the AZURE_DESC and OPENSTACK_DESC descriptions.
r277252:
Update release(7)
r277253:
Add 'list-vmtargets' target, which produces a list of all supported
VM and cloud provider images.
Add VHD_DESC, VMDK_DESC, QCOW2_DESC, RAW_DESC image descriptions.
Format the output to make a bit more readable.
Update release(7) to document the list-vmtargets target.
r277263:
Add initial support for the GCE (Google Compute Engine) cloud hosting
provider image.
r277264:
Style and line length cleanup.
r277383:
Remove the console setting from rc.conf(5), which is not used there.
While here, set console to include vidconsole in the loader.conf(5).
r277384:
Fix an indentation nit.
No functional changes.
r277393:
Remove the pkg-clean(8) call from vm_extra_pre_umount() since the
function is often overridden.
Add vm_extra_pkg_rmcache() to call pkg-clean(8) to avoid duplicated
code.
r277394:
Move resolv.conf(5) removal back to vm_extra_pre_umount() where it
belongs.
The GCE image needs resolv.conf(5) to exist (created as part of the
image setup), so it cannot be removed.
r277395:
Comment the line that configures ttys(5) to 'off', which makes it
impossible to test that the image boots.
Add a note explaining why the line is commented, and not (yet) removed
entirely.
r277438:
Move the 'install' bits that are specific to virtual machine images
from the Makefile to Makefile.vm.
Rename the 'install' target to 'release-install', and add a new
'vm-install' target.
Add a new 'install' target that invokes the new targets.
r277439:
Add WITH_CLOUDWARE to the list of make(1) variables for the release
build.
r277447:
Remove hw.vga.textmode=1 from the VM image loader.conf, which was
included during test builds and not intended to be included when
merging this project branch back to head.
r277455:
Remove mk-azure.sh, which is no longer needed.
MFC after: 1 month
X-MFC-To: stable/10 (requires mkimg(1))
Help from: cperciva, swills
Relnotes: yes
Sponsored by: The FreeBSD Foundation
use floating point hardware instructions (because all armv6/7 systems we
support have fp hardware), but it passes args using a soft-float compatible
ABI. This should give noticible performance improvement (but not as much
as using the armv6hf arch).
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
all supported VM and cloud provider images.
Add VHD_DESC, VMDK_DESC, QCOW2_DESC, RAW_DESC image
descriptions.
Format the output to make a bit more readable.
Update release(7) to document the list-vmtargets target.
Sponsored by: The FreeBSD Foundation
- Add a "CLOUD HOSTING MACHINE IMAGES" section,
documenting the CLOUDWARE and WITH_CLOUDWARE
make(1) environment variables.
- Document the vm-cloudware and list-cloudware
targets.
- Add release/Makefile.vm, release/tools/*.conf
and release/tools/vmimage.subr to FILES.
Sponsored by: The FreeBSD Foundation
Quoting 19 years bpf.4 manual from bpf-1.2a1:
"
(SIOCGIFADDR is obsolete under BSD systems. SIOCGIFCONF should be
used to query link-level addresses.)
"
* SIOCGIFADDR was not imported in NetBSD (bpf.c 1.36) and OpenBSD.
* Last bits (e.g. manpage claiming SIOCGIFADDR exists) was cleaned
from NetBSD via kern/21513 5 years ago,
from OpenBSD via documentation/6352 5 years ago.
periodic(8) run, taken from uname(1) '-U' and '-K'
flags.
Reviewed by: allanjude, dvl
Differential Revision: https://reviews.freebsd.org/D1541
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
- Close a migration race where callout_reset() failed to set the
CALLOUT_ACTIVE flag.
- Callout callback functions are now allowed to be protected by
spinlocks.
- Switching the callout CPU number cannot always be done on a
per-callout basis. See the updated timeout(9) manual page for more
information.
- The timeout(9) manual page has been updated to reflect how all the
functions inside the callout API are working. The manual page has
been made function oriented to make it easier to deduce how each of
the functions making up the callout API are working without having
to first read the whole manual page. Group all functions into a
handful of sections which should give a quick top-level overview
when the different functions should be used.
- The CALLOUT_SHAREDLOCK flag and its functionality has been removed
to reduce the complexity in the callout code and to avoid problems
about atomically stopping callouts via callout_stop(). If someone
needs it, it can be re-added. From my quick grep there are no
CALLOUT_SHAREDLOCK clients in the kernel.
- A new callout API function named "callout_drain_async()" has been
added. See the updated timeout(9) manual page for a complete
description.
- Update the callout clients in the "kern/" folder to use the callout
API properly, like cv_timedwait(). Previously there was some custom
sleepqueue code in the callout subsystem, which has been removed,
because we now allow callouts to be protected by spinlocks. This
allows us to tear down the callout like done with regular mutexes,
and a "td_slpmutex" has been added to "struct thread" to atomically
teardown the "td_slpcallout". Further the "TDF_TIMOFAIL" and
"SWT_SLEEPQTIMO" states can now be completely removed. Currently
they are marked as available and will be cleaned up in a follow up
commit.
- Bump the __FreeBSD_version to indicate kernel modules need
recompilation.
- There has been several reports that this patch "seems to squash a
serious bug leading to a callout timeout and panic".
Kernel build testing: all architectures were built
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D1438
Sponsored by: Mellanox Technologies
Reviewed by: jhb, adrian, sbruno and emaste
legitimacy of removal is proved by the fact that implementation contained
a critical bug: the response allocated was sizeof(pointer), while should
had been 2*sizeof(struct ng_cisco_ipaddr). The reason for ng_iface(4) to
support ng_cisco(4) message isn't explained anywhere, and code comes from
original Whistle import.
Sponsored by: Nginx, Inc.
DCTCP congestion control algorithm aims to maximise throughput and minimise
latency in data center networks by utilising the proportion of Explicit
Congestion Notification (ECN) marked packets received from capable hardware as a
congestion signal.
Highlights:
Implemented as a mod_cc(4) module.
ECN (Explicit congestion notification) processing is done differently from
RFC3168.
Takes one-sided DCTCP into consideration where only one of the sides is using
DCTCP and other is using standard ECN.
IETF draft: http://tools.ietf.org/html/draft-bensley-tcpm-dctcp-00
Thesis report by Midori Kato: https://eggert.org/students/kato-thesis.pdf
Submitted by: Midori Kato <katoon@sfc.wide.ad.jp> and
Lars Eggert <lars@netapp.com>
with help and modifications from
hiren
Differential Revision: https://reviews.freebsd.org/D604
Reviewed by: gnn