functions to be used by the dynamic linker. This can be called by
threads packages at start-up time. I will add the call to libc_r
soon.
Also add a default locking method that is used up until dllockinit()
is called. The default method works by blocking SIGVTALRM, SIGPROF,
and SIGALRM in critical sections. It is based on the observation
that most user-space threads packages implement thread preemption
with one of these signals (usually SIGVTALRM).
The dynamic linker has never been reentrant, but it became less
reentrant in revision 1.34 of "src/libexec/rtld-elf/rtld.c".
Starting with that revision, multiple threads each doing lazy
binding could interfere with each other. The usual symptom was
that a symbol was falsely reported as undefined at start-up time.
It was rare but not unseen. This commit fixes it.
Doing the "right thing" here is difficult, so create two ENTRY points for
each function (for example, __setjmp and setjmp are equivalent). This
isn't pretty, but it works for both aout and ELF.
libc symbol naming needs an overhaul in order to properly support function
wrapping, specifically in the case of a real libpthread, and these
duplicate entry points should be fixed as part of that overhaul.
Pointed out by: bde
takes an int arg and is prototyped in <string.h>. It has the opposite
interface botches to psignal(3) which takes a bogus unsigned arg but is
prototyped in the right place.
This is not the last of the interface problems for strsignal(). We
obtained it from NetBSD, but NetBSD has moved its prototype to
<unistd.h>. strsignal() should return const char *, but it returns
char * for historical reasons. NetBSD declares it as returning
__aconst char, where __aconst is normally empty but can be set to
`const' to give better error checking. glibc-2.1.1 prototypes
strsignal() in <string.h>.
IPv6 specific library functions addition.
(getnameinfo(), getaddrinfo(), and IPv6 transport support is not yet)
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
__setjmp, __longjmp, __sigsetjmp, and __siglongjmp, respectively.
This supports cancellation in the linuxthreads port. In the long run,
a much more comprehensive solution will necessitate more dramatic changes
to libc symbol naming, and these aliases will probably need modification
at that time.
MAN8+= rstat_svc.8
The file it talks about doesn't exist on FreeBSD, so there's no point in
installing the manual page. There was already a comment to this effect in
this file, but the entry hadn't been commented out.
rstat.1 and rstat_svc.8 can probably actually be removed.
PR: docs/13767
Submitted by: Seth <seth@freebie.dp.ny.frb.org>
madvise().
This feature prevents the update daemon from gratuitously flushing
dirty pages associated with a mapped file-backed region of memory. The
system pager will still page the memory as necessary and the VM system
will still be fully coherent with the filesystem. Modifications made
by other means to the same area of memory, for example by write(), are
unaffected. The feature works on a page-granularity basis.
MAP_NOSYNC allows one to use mmap() to share memory between processes
without incuring any significant filesystem overhead, putting it in
the same performance category as SysV Shared memory and anonymous memory.
Reviewed by: julian, alc, dg
is good for... :-)), I discovered that part of the change when mkstemps()
was brought in was missed - it was missing the termination case to make
sure it doesn't walk into the suffix. This isn't the same code OpenBSD
has, I think this is a little better as we terminate the loop in a better
spot.
Discuss in the BUGS section of the manpage, problems involved with
the use of %C, %e, %l, %p, %U and %W.
PR: 13901
Reported by: scott@chronis.pobox.com
the environment. This allows big ID warnings to be suppressed for
vipw and chpass as well.
Since the environment variable test is only performed for callers
of pw_scan() that do not set pw_big_ids_warning, the test can still
be overriden. Currently, chpass and pwd_mkdb are the only users
of pw_scan() and neither of them overrides the environment variable
test.
readdir_r is not POSIX according to POSIX_SOURCE, bruce says:
> readdir_r() is in the _POSIX_SOURCE section, but is not a POSIX.1-1990
> function. It's POSIX.1-1996 so it should be under a different feature
> test which we don't support yet.
make sure errno is saved so that its contents are cleared unless
necessary.
Submitted by: bde
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.
the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.
add readdir_r to both libc and libc_r
add some 'const' attributes to function parameters
Reviewed by: eischen, jasone
with NetBSD and the Single Unix Specification v2.
This updates some structures with other, almost equivalent types and
effort is under way to get the whole more consistent.
Also removes a double definition of INET6 and some other clean-ups.
Reviewed by: green, bde, phk
Some part obtained from: NetBSD, SUSv2 specification
happy with how this end up and will re-visit the entire empty field
problem, but this patch solves the NIS problem for now.
Submitted by: Dan Nelson <dan@emsphone.com>
PR: 14865,14984
mode. This addresses a well-known race condition that can cause
servers to hang in accept(). The relevant case is when somebody
connects to the server and then immediately kills the connection
by sending a TCP reset. On the server this causes select to report
a ready condition on the socket, after which the accept call blocks
because there is no longer any pending connection to accept.
In -current there is already a work-around for this in the kernel.
It was merged into -stable some time ago, but then David Greenman
reverted it because it seemed to be causing a socket leak in some
cases. (See uipc_socket.c revision 1.51.2.3.) Hence this userland
fix is needed in -stable, and I plan to merge it into that branch
soon because it fixes a potential DoS attack. It may also be needed
in -current if the suspected socket leak turns out to be real. In
any case, after thinking it over I believe the fix belongs in
userland. An application shouldn't assume that a ready return from
select guarantees that the subsequent I/O operation cannot block.
A lot can happen between the select and the accept.
A similar fix should most likely be applied to the Unix domain
socket transport too.
Submitted by: peter
Reviewed by: jdp
It used to loop back up to the accept() call and block there,
shutting out all other transports until a new connection came in.
Now it returns instead after dropping the connection. That will
take it back to the select() loop where all transports can be
serviced. I intend to MFC this within a day or two since it
fixes a DoS vulnerability.
This fixes some nasty procfs problems for SMP, makes ps(1) run much faster,
and makes ps(1) even less dependent on /proc which will aid chroot and
jails alike.
To disable this facility and revert to previous behaviour:
sysctl -w kern.ps_arg_cache_limit=0
For full details see the current@FreeBSD.org mail-archives.
which is zero-based.
Correct the range checking for the value taken for %S.
Add %w for the day of the week (0-6).
Accept (but do nothing with) %U and %W. The comment for this change was
taken from NetBSD.
These changes were made after several failed attempts to contact the
author of our strptime.c .
PR: 10131
Submitted by: tadf@kt.rim.or.jp (Tadayoshi Funaba)
should close all outstanding PRs on incorrect inet_aton behavior, and
since it has a decent parsing routine, doesn't allow some hysterically
working behavior.
PR: 13628
Submitted by: Adrian Chadd <adrian@FreeBSD.org>
next try over chroot (descriptor closed). getgrnam() used already handles
endgrent() properly and honors _gr_stayopen. Automatically call
setgroupent(1) when _pw_stayopen is set (for YP/NIS code).
setjmp() gets the jmp_buf pointer from the wrong place (the place
where the return address is) in the shlib case, and uses it (only)
to fetch the current signal mask to address (return_address + 28).
This address is normally read-only (I hope), so the sigprocmask()
call has no effect except to return an error code.
\end{quote}
Submitted by: bde
the code, which seems to implement the POSIX requirements, and
have described the behavior here. Basically, it behaves the same
as select(2).
Noticed by: John Polstra
to call osigaction(). But that's wrong because it causes the
handler to receive a struct osigcontext instead of the expected
struct sigcontext. Use sigaction() instead, copying the compatible
portion of the signal mask.
Reviewed by: marcel
-----------------------------
Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c
The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.
There are version bumps for the following libraries:
libdialog
libreadline
libc
libc_r
libedit
libftpio
libss
These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.
NOTE: libncurses already had an version bump and has not been
given one now.
NOTE: doscmd is a real casualty and has been disconnected for
the moment. Reconnection will eventually happen after
doscmd has been fixed. I'm aware that being the last one
to touch it, I'm automaticly promoted to being maintainer.
According to good taste this means that I will receive a
badge which either will be glued or mechanically stapled,
drilled or otherwise violently forced onto me :-)
NOTE: pcvt/vttest cannot be compiled with -traditional. The
change cause sys/types to be included along the way which
contains the const and volatile modifiers. I don't consider
this a solution, but more a workaround.
required to be "announced" by a new bit in sa_flags to indicate the
program is aware of and has taken care of them. eg: SA_SIGINFO means
the program has used the sa_siginfo field (versus sa_handler).
sigaction, used to describe an action to be taken, is defined in the
header <signal.h> to include at least the following members:"
^^^^^^^^
A sigaction defined on stack with essentially random contents may have
just about anything underneath fields that the program doesn't know about.
It is not safe to delete the bzero.
else, it is equivalent to strdup(). So, we will check if the substitution
tables are trivial at the load time, and possibly save 2 calls to
__collate_substitute() in strcoll().
Still, __collate_substitute() should not exist.
Other minor optimizations. I got ~30% speedup in strcoll() for 50 char strings,
~40% speedup for 100 char strings, and unmeasurable speedup for 1M strings.
Collates are still terribly slow. To make them reasonable fast,
__collate_substitute() should be killed.
representation of the full month name. In the Russian locale, this alternative
will be "nominative case", useful when the date designate month as a whole.
E.g. month heading in a calendar. I hope it can be useful for some other
locales too.
Discussed with: wollman, ache
Style and punctuation errors fixes.
ERRORS section included to RETURN VALUES because it's
describing return values instead of errors and their handling.
Reviewed by: mpp
patch to stop the core dumps while others come up with a better
reviewed patch which may also fix other problems. We do illegal
pointer arithmetic, but it should be OK since FreeBSD only supports
machines with flat address spaces.
Submitted by: bde
should be used from now on for anything security but not auth-related.
Included are updates for all relevant manpages and also to /etc files,
creating a new /var/log/security. Nothing in the system logs to
/var/log/security yet as of the time of this commit.
Reviewed by: rgrimes, imp, chris
- Sort xrefs
- FreeBSD.ORG -> FreeBSD.org
- Be consistent with section names as outlines in mdoc(7)
- Other misc mdoc cleanup.
PR: doc/13144
Submitted by: Alexy M. Zelkin <phantom@cris.net>
