in the way we implement handling of relocations.
As for the kernel part this fixes the loading of lots of modules,
which failed to load due to unresolvable symbols when built after
the GCC 4.2.0 import. This wasn't due to a change in GCC itself
though but one of several changes in configuration done along the
import. Specfically, HAVE_AS_REGISTER_PSEUDO_OP, which causes GCC
to denote global registers used for scratch purposes and in turn
GAS uses R_SPARC_OLO10 relocations for, is now defined.
While at it replace some more ELF_R_TYPE which should have been
ELF64_R_TYPE_ID but didn't cause problems so far.
- Sync a sanity check between kernel and rtld(1) and change it to be
maintenance free regarding the type used for the lookup table.
- Sprinkle const on lookup tables.
- Use __FBSDID.
Reported and tested by: yongari
MFC after: 5 days
itself. It needs mmap(2), which now needs getosreldate(3) and
which in turn uses a global variable to cache the result. This
cannot be done before linking is done.
See also: ../sparc64/reloc.c:1.15
Approved by: re (kensmith)
potentially dangerous environment variables all together. It should be
noted that the run-time linker will not honnor these environment variables
if the process is tainted currently. However, once a child of the tainted
process calls setuid(2), it's status as being tainted (as defined by
issetugid(2)) will be removed. This could be problematic because
subsequent activations of the run-time linker could honnor these
dangerous variables.
This is more of an anti foot-shot mechanism, there is nothing I am
aware of in base that does this, however there may be third party
utilities which do, and there is no real negative impact of clearing
these environment variables.
Discussed on: secteam
Reviewed by: cperciva
PR: kern/109836
MFC after: 2 weeks
symbol lookup failures that later result in null-pointer
dereferences. This needs looking into, but since we're
close to release it's possible that it's not resolved before
that time.
Warning, after symbol versioning is enabled, going back is not easy
(use WITHOUT_SYMVER at your own risk).
Change the default thread library to libthr.
There most likely still needs to be a version bump for at least the
thread libraries. If necessary, this will happen later.
to override weak symbols exported by libc, so by definition these two
are using the same symbol version names.
Reflect the reality by referring to libc's Versions.def directly.
main object list, its versioning information needs to be examined
separately.
This hopefully fixes problems that people running with SYMVER_ENABLED
are experiencing.
activate the traces, set the LD_UTRACE (or LD_32_UTRACE) environment
variable. This also includes code in kdump(8) to parse the traces.
Reviewed by: kan, jdp
MFC after: 2 weeks
dso that are actually loading. If dso a.so depends on b.so, then dlsym
with handle from dlopen("b.so") will fail unconditionally.
Correct implementation shall use the Obj_Entry.needed list to walk
dependencies DAG.
Test provided by: jkim
Tested (prev. version) by: jkim, Nicolas Blais <nb_root at videotron ca>, h.blanke at chello nl
Pointy hat to: kib
Approved by: kan (mentor)
given as dso handle, but also in the implicit dependencies of that dso.
Also, const-ify the read-only parameter objlist of symlook_list.
Reported by: "Simon 'corecode' Schubert" <corecode at fs ei tum de>
Approved by: kan (mentor)
X-MFC-After: 6.2
* Add posix_memalign().
* Move calloc() from calloc.c to malloc.c. Add a calloc() implementation in
rtld-elf in order to make the loader happy (even though calloc() isn't
used in rtld-elf).
* Add _malloc_prefork() and _malloc_postfork(), and use them instead of
directly manipulating __malloc_lock.
Approved by: phk, markm (mentor)
oldest versioned symbol available. Do not accept hidden symbols for
all other versions.
Use "<obj->path>: <error message>" for all error messages in new
functions to make them more consistent.
to be compatible with symbol versioning support as implemented by
GNU libc and documented by http://people.redhat.com/~drepper/symbol-versioning
and LSB 3.0.
Implement dlvsym() function to allow lookups for a specific version of
a given symbol.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
we included the length of the path in the returned size but not the length
of the associated Dl_serpath structure. Without this fix, programs
attempting to allocate a structure to hold the search path information
would allocate too small of a buffer and rtld would overrun the buffer
while filling it via a subsequent RTLD_DI_SERINFO request.
Submitted by: "William K. Josephson" wkj at morphisms dot net
Reviewed by: jdp
MFC after: 2 weeks
Like on libthr, there is an i386_set_gsbase() stub implementation here
to avoid libc.so.5 issues. This should likely be a weak symbol and I
expect this will be fixed soon.
Approved by: re
loads and stores (resp.) The ldq_u and stq_u instruction mask off the
lower 3 bits of the final address before loading from or storing to
the address, so as to avoid unaligned loads and stores. They do not
themselves allow loads from or stores to unaligned addresses. Replace
the macro definitions by a packed struct dereference.
Submitted by: Richard Henderson (rth at twiddle dot net)
are initialised to zero. When freeing TLS, don't attempt to free DTV
slots which were not used.
Pointed out by: Joerg Sonnenberger
X-MFC-After: After the branch, probably
LD_LIBMAP_DISABLE, LD_LIBRARY_PATH) are used, then make sure the
libraries being loaded aren't on a noexec-mounted filesystem.
This is a compromise position: I'm assuming that nobody will be silly
enough to set the noexec mount flag on part of the default library
path, in order to avoid adding extra overhead into the common case
(where those environment variables aren't used).
Discussed with: csjp, secteam
MFC after: 1 week
Another handy libmap patch. Lets you do stuff like this:
LD_LIBMAP="libpthread.so.1=libthr.so.1" mythreadedapp
If you already have a program-specific override in libmap.conf, note
that you must use a program-specific override in LD_LIBMAP:
LD_LIBMAP="[mythreadedapp],libpthread.so.1=libthr.so.1" mythreadedapp
PR: bin/74471
Submitted by: Dan Nelson <dnelson AT allantgroup.com>
MFC after: 2 weeks
In the old world (as the surrounding comment in makefile says), there
was the /usr/libexec/ld-elf.so.1 binary which is now a symlink to
/libexec/ld-elf.so.1. To symlink, we need to make sure that the
_target_ (and the target is /usr/libexec/ld-elf.so.1) doesn't have
"schg" flag set. A real solution is to protect the chflags call only if
target exists, like we do in usr.bin/tip/tip/Makefile.
Requested by: ru
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
(and that is for now being worked around by a binutils patch).
The rtld code tested &_DYNAMIC against 0 to see whether rtld itself
was built as PIC or not. While the sparc64 MD code did not rely
on the preset value of the GOT slot for _DYNAMIC any more due
to previous binutils changes, it still used to not be 0, so
that this check did work. The new binutils do however initialize
this slot with 0. As a consequence, rtld would not properly initialize
itself and crash.
Fix that by introducing a new macro, RTLD_IS_DYNAMIC, to take the role
of this test. For sparc64, it is implemented using the rtld_dynamic()
code that was already there. If an architecture does not provide its
own implementation, we default to the old check.
While being there, mark _DYNAMIC as a weak symbol in the sparc64
rtld_start.S. This is needed in the LDSCRIPT case, which is however
not currently supported for want of an actual ldscript.
Sanity checked with md5 on alpha, amd64, i386 and ia64.
eg:
[foo]
...
matches any executable 'foo'
[/usr/bin/foo/]
...
matches any executable under the directory /usr/bin/foo/
Exact matches continue to function as before.
PR: bin/66769
Submitted-by: Dan Nelson
with the correct alignment. This is important because this calls to
library static constructors are made from here. The bug in the old crt*.s
files hid this because in this case, two wrongs do indeed make a right.
Also, call _rtld_bind() with the correct alignment, because it calls back
into the pthread library locking functions. If things happen just
the wrong way, we get a SIG10 due to the broken stack alignment.
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
(libmap available) and 1 for failure. Assign this return to the
global 'libmap_disable' variable in rtld.c.
This totally prevents any libmap functions from being called after
lm_init() if no config file is present.
rtld. When _DYNAMIC is referenced normally from C the global offset
table is used implicitly, but newer versions of binutils don't initialize
it statically in the binary, so this doesn't work until rtld is relocated,
which _DYNAMIC is needed for... So, as on other systems with the same
problem, we disassemble a call instruction to _DYNAMIC in order to get
its address.
Setting the LD_DUMP_REL_PRE or LD_DUMP_REL_POST environment variables
cause rtld-elf to output a table of all relocations.
This is useful for debugging.
While I'm here:
- Let lm_add() call strdup() on its own behalf.
- Use a temporary pointer when parsing constraints; only set the
constraint pointer on a totally successful match.
PR: bin/52783
Submitted by: David P. Reese Jr. <daver@gomerbud.com>
Approved by: re (rwatson)
implementation in case default one provided by rtld is
not suitable.
Consolidate various identical MD lock implementation into
a single file using appropriate machine/atomic.h.
Approved by: re (scottl)
DT_NEEDED links is not flexible enough for cases where dynamically
loaded modules form a dependency cycle.
This should fix an infinite recursion problem encountered by Yahoo.
Approved by: re (jhb)
This is an optional feature, disabled by default.
This will be useful to people testing the various POSIX threading
libraries under -CURRENT but can easily serve other needs.
objects.
Programs such as sshd depend on two pointers to the same function being
equal in a given process. However, the current ia64 implementation
ensures that they're equal when both the pointers are instantiated in
the same ELF object. The attached patch ensures that they're equal
irrespective of where they're instantiated.
Reviewed by marcel@ (mentor) and kan@
Introduce a new unlink_object() function and call it in
unload_object() instead. Removing the object in unref_dag() is
too early, rtld calls _fini() function after that and shared
objects might fail resolve their own symbols.
