to port software written for Linux variant of qsort_r(3).
Reviewed by: kib, arichardson
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23174
The vnode pager does not want the object lock held. Moving this out allows
further object lock scope reduction in callers. While here add some missing
paging in progress calls and an assert. The object handle is now protected
explicitly with pip.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23033
On a MINIMAL kernel, mps.ko wouldn't load because it uses the xpt_hold_boot
symbol from CAM, but didn't have a dependency on cam(4).
(CEM: Some context: when linking loaded modules, the kernel dynamic linker
only looks for definitions in explictly marked dependency modules. Also,
the identical mpr(4) driver uses the same CAM function, but already had the
correct MODULE_DEPEND(), so no similar change is needed there.)
Submitted by: Greg V <greg AT unrelenting.technology>
Reviewed by: imp, myself
Differential Revision: https://reviews.freebsd.org/D23272
Now that we can override the format to avoid the time spent compressing
pkgbase packages we can test `make packages` with only 5 minutes or so
added to the CI cycle time.
A future change should switch the CI smoke test to using these packages.
Sponsored by: The FreeBSD Foundation
Summary:
The CPLD is the communications medium between the CPU and the XMOS
"Xena" event coprocessor. It provides a mailbox communication feature,
along with dual-port RAM to be used between the CPU and XMOS. Also, it
provides basic board stats as well, such as PCIe presence, JTAG signals,
and CPU fan speed reporting (in revolutions per second). Only fan speed
reading is handled, as a sysctl.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D23136
Summary:
This fixes kernel crashing when tunable "machdep.moea64_bpvo_pool_size" is
set to a value higher then 327680 (default value). Function
moea64_mid_bootstrap() relies on moea64_bpvo_pool_size, but at time of the
use the variable wan't yet updated with the new value provided by user.
Problem was detected after trying to use a VM with 64GB of RAM, and default
moea64_bpvo_pool_size is insufficient (kernel boot used more than 470000) .
I think default value must be discussed to address this use case, or find a
way to calculate pool size automatically based on amount of memory detected.
Test Plan: Tested on QEMU VM with 64GB of RAM using "set
machdep.moea64_bpvo_pool_size=655360" on loader prompt
Submitted by: Alfredo Dal'Ava Júnior (alfredo.junior_eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23233
This is a qspi driver for the Xilinx Zynq-7000 chip.
It could be useful for anyone wanting to boot a system from flash memory
instead of SD cards.
Submitted by: Thomas Skibo (thomasskibo@yahoo.com)
Differential Revision: https://reviews.freebsd.org/D14698
This method will set the desired voltaged based on values in the DTS.
It will not enable the regulator, this is the job of either a consumer
or regnode_set_constraint SYSINIT if the regulator is boot_on or always_on.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23216
x86 needs bootstrap GNU as for assembling a few files, and powerpc needs
GNU ld.bfd for linking 32-bit objects. All other targets either fully
use in-tree Clang and lld, or rely on external toolchain.
Sponsored by: The FreeBSD Foundation
Not all pins in Allwinner have interrupts support so we rely
on the padconf data to add the proper caps when pin_getcaps is called.
The pin is switch to the specific "eint" function during setup_intr and
switched back to its old function in teardown_intr.
Only INTR_MAP_DATA_GPIO is supported for now.
MFC after: 1 month
WITHOUT_BINUTILS and WITHOUT_BINUTILS_BOOTSTRAP previously included
claims about being unable to build if set. Those cautions are no longer
universally true, and most FreeBSD targets can function more or less
without enabling GNU Binutils. Just remove the cautions.
Sponsored by: The FreeBSD Foundation
GNU as 2.17.50 is currently required by amd64 and i386 for at least one
file that cannot be assembled by Clang's integrated assembler (IAS).
Other supported CPU architectures either use Clang IAS for all assembly
files, or rely on external toolchain.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23180
Add a eint_bank member to the allwinner_pins structure.
On Allwinner SoCs not all pins can do interrupt.
Older SoC (A10/A13 and A20) there is a maximum number of interrupts
set to 32 and all the configuration is done in the same registers.
While on "newer" SoCs (>=A31) interrupts registers are splitted per
pin bank (i.e. all interrupts available in bank B will be configured
with a sets of registers and the one in bank G in another set).
While here set the names to all interrupts function to
pX_eintY where X is the bank name and Y the interrupt number.
To whom ever in the future look at the H5 manual and notice that the bank F
have interrupts support : This isn't true, trust me.
MFC after: 1 month
paging.
Shadow objects are marked with a COLLAPSING flag while they are collapsing with
their backing object. This gives us an explicit test rather than overloading
paging-in-progress. While split is on-going we mark an object with SPLIT.
These two operations will modify the swap tree so they must be serialized
and swap_pager_getpages() can now directly detect these conditions and page
more conservatively.
Callers to vm_object_collapse() now will reliably wait for a collapse to finish
so that the backing chain is as short as possible before other decisions are
made that may inflate the object chain. For example, split, coalesce, etc.
It is now safe to run fault concurrently with collapse. It is safe to increase
or decrease paging in progress with no lock so long as there is another valid
ref on increase.
This change makes collapse more reliable as a secondary benefit. The primary
benefit is making it safe to drop the object lock much earlier in fault or
never acquire it at all.
This was tested with a new shadow chain test script that uncovered long
standing bugs and will be integrated with stress2.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D22908
Since r356672 ("vfs: rework vnode list management") there is nothing to do
apart from altering freevnodes count, but this much can be safely done based
on the result of atomic_fetchadd.
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D23186
Compressing .txz packages can be rather slow, and speed is likely more
important than disk space during development. Allow package format to
be set via PKG_FORMAT make variable.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23257
Due to the way u-boot for 32-bit powerpc is compiled, the interrupt code
assumes that the GOT pointer (r30) on u-boot is always intact.
When making syscalls to u-boot, ensure that we have restored r30 like we
found it before we enable interrupts to prevent u-boot from crashing if a
timer interrupt was pending.
This fixes ubldr on e500 qemu (assuming you have recompiled qemu's u-boot
with API support!)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23258
More background is available in r356876, but this new interface is more
portable across ZFS implementations and cleaner for what libbe is attempting
to achieve anyways.
MFC after: 3 days
This will be used in libbe in place of the internal zmount(); libbe only
wants to be able to mount a dataset at an arbitrary mountpoint without
altering dataset/pool properties. The natural way to do this in a portable
way is by creating a zfs_mount_at() interface that's effectively zfs_mount()
+ a mountpoint parameter. zfs_mount() is now a light wrapper around the new
method.
The interface and implementation have already been accepted into ZFS On
Linux, and the next commit to switch libbe() over to this new interface will
solve the last compatibility issue with ZoL. The next sysutils/openzfs
rebase against ZoL should be able to build libbe/bectl with only minor
adjustments to build glue.
Reviewed by: Ryan Moeller <ryan freqlabs com>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23132
Rather than invoking `pkg config ABI` repeatedly.
Reviewed by: manu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23255
r355473 vastly improved the readability and cleanliness of these Makefiles.
Every single one of them follows the same pattern and duplicates the exact
same logic.
Now that we have GENERATED/SRCS, split SRCS up into the two parameters we'll
use for ${MAKESYSCALLS} rather than assuming a specific ordering of SRCS and
include a common sysent.mk to handle the rest. This makes it less tedious to
make sweeping changes.
Some default values are provided for GENERATED/SYSENT_*; almost all of these
just use a 'syscalls.master' and 'syscalls.conf' in cwd, and they all use
effectively the same filenames with an arbitrary prefix. Most ABIs will be
able to get away with just setting GENERATED_PREFIX and including
^/sys/conf/sysent.mk, while others only need light additions. kern/Makefile
is the notable exception, as it doesn't take a SYSENT_CONF and the generated
files are spread out between ^/sys/kern and ^/sys/sys, but it otherwise fits
the pattern enough to use the common version.
Reviewed by: brooks, imp
Nice!: emaste
Differential Revision: https://reviews.freebsd.org/D23197
Some systems, such as higher end Threadripper, may have
NUMA domains with no physical memory, Don't allocate
from these domains.
This fixes a "panic: vm_wait in early boot" on my 2990WX desktop
Reviewed by: jeff
Sponsored by: Netflix
Correction after r333476:
- write this as LOG_DEBUG again instead of LOG_INFO;
- get back function name into the message;
- error may be ESRCH if an address is removed in process (by carp f.e.),
not only ENOENT;
- expression complexity grows, so try making it more readable.
MFC after: 1 week
In rS354701, I replaced text relocations with offsets from &generictrap.
Unfortunately, the magic variable I was using doesn't actually mean the
address of &generictrap, in bridge mode it actually means &generictrap64.
So, for bridge mode to work, it is necessary to differentiate between
"where do we need to branch to to handle a trap" and "where is &generictrap
for purposes of doing relative math".
Introduce a new TRAP_ENTRY and use it instead of TRAP_GENTRAP for doing
actual calls to the generic trap handler.
Reported by: Mark Millard <marklmi@yahoo.com>
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23057
%20%20%20 is ugly and doesn't really help make human-readable devfs names.
PR: 243318
Reported by: Peter Eriksson <pen AT lysator.liu.se>
Relnotes: yes
Summary:
This makes the interface described in the definition file act like a
pseudo-IFUNC service, by caching the found method locally.
Applying this to the PowerPC MMU definitions, it yields a significant
(15-20%) performance improvement, seen in both a 'make buildworld' and a
parallel build of LLVM, on a POWER9 system.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D23245
It gets rolled up to the global when deferred requeueing is performed.
A dedicated read routine makes sure to return a value only off by a certain
amount.
This soothes a global serialisation point for all 0<->1 hold count transitions.
Reviewed by: jeff
Differential Revision: https://reviews.freebsd.org/D23235
Summary:
Consolidate the NUMA associativity handling into a platform function.
Non-NUMA platforms will just fall back to the default (0). Currently
only implemented for powernv, which uses a lookup table to map the
device tree associativity into a system NUMA domain.
Fixes hangs on powernv after r356534, and corrects a fairly longstanding
bug in powernv's NUMA handling, which ended up using domains 1 and 2 for
devices and memory on power9, while CPUs were bound to domains 0 and 1.
Reviewed by: bdragon, luporl
Differential Revision: https://reviews.freebsd.org/D23220
It turns out the maximum TLB1 page size on e5500 is 4G, despite the format
being defined for up to 1TB.
So, we need to clamp the DMAP TLB1 entries to not attempt to create 16G or
larger entries.
Fixes boot on my X5000 in which I just installed 16G of RAM.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23244
In r291668, an instruction was added to sigcode64.S without the nop pad at
the end being taken out.
Due to alignment, this means that a dword is being wasted on the shared
page for no reason.
Take out this nop, and add some comments while I'm here.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23055
This resulted in the partitioning step failing if either of the
"Auto (UFS)" or "Manual" options were selected.
Reason: partedit was attempting to open a directory (TMPDIR) read/write,
which resulted in errno(2) 21 - EISDIR - Is a directory.
Reported by: Clay Daniels <clay.daniels.jr@gmail.com>
Reviewed by: Ryan Moeller <ryan@freqlabs.com>
Approved by: emaste, bcran
Differential Revision: https://reviews.freebsd.org/D23232
This makes amrr_node_stats() cleaner and allows the rate printing to be
reusable.
Submitted by: Neel Chauhan <neel at neelc.org>
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D22318
Raspberry Pi are all over the board, and the reality is that there's no harm
in including all of the definitions by default but plenty of harm in the
current situation. This change is safe because we match a definition by root
/compatible in the FDT, so there will be no false-positives because of it.
The main array of definitions grows, but it's only walked exactly once to
determine which we need to use.
Previously, this check was only in sys_sigreturn() which meant that
user applications could write invalid values to the register via
setcontext() or swapcontext().
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23219
arm64 and riscv were only saving and restoring floating point
registers for sendsig() and sys_sigreturn(), but not for getcontext(),
setcontext(), and swapcontext().
While here, remove an always-false check for uap being NULL from
sys_sigreturn().
Reviewed by: br, mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23218
dma(8) depends on OpenSSL unconditionally.
Reported by: Michael Dexter's Build Options Survey run
MFC after: 1 weeks
Sponsored by: The FreeBSD Foundation
As part of the RISC-V ABI, the gp register is expected to initialized
with the address of __global_pointer$ as early as possible. This allows
loads and stores from .sdata to be relaxed based on the value of gp. In
locore.S we do this initialization twice, once each for va and mpva.
However, in both cases the initialization is preceded by an la
instruction, which in theory could be relaxed by the linker.
Move the initialization of gp to be slightly earlier (before la
cpu_exception_handler), and add an additional gp initialization at the
very beginning of _start, before virtual memory is set up.
Reported by: jrtc27
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D23139
