Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
illumos/illumos-gate@a3b5583021
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Currently vdev_label_sync and vdev_uberblock_sync take a zio_t and assume
that its io_private is a pointer to the good_writes count. They should
instead accept this argument explicitly.
illumos/illumos-gate@a3b5583021
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
Mirrors are supposed to provide redundancy in the face of whole-disk failure
and silent damage (e.g. some data on disk is not right, but ZFS hasn't
detected the whole device as being broken). However, the current device
removal implementation bypasses some of the mirror's redundancy.
illumos/illumos-gate@3a4b1be953
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Sara Hartse <sara.hartse@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
On high-end systems running async sequential write workloads, especially
NUMA systems with flash or NVMe storage, one significant performance
bottleneck is selecting a metaslab to do allocations from. This process
can be parallelized, providing significant performance increases for
these workloads.
illumos/illumos-gate@f78cdc34af
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Paul Dagnelie <pcd@delphix.com>
On high-end systems running async sequential write workloads, especially
NUMA systems with flash or NVMe storage, one significant performance
bottleneck is selecting a metaslab to do allocations from. This process
can be parallelized, providing significant performance increases for
these workloads.
illumos/illumos-gate@f78cdc34af
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Paul Dagnelie <pcd@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
device removal, zpool checkpoint) we've started imposing limits in the
vdevs that can be used with them based on the maximum addressable offset
(currently 64PB for a top-level vdev).
The new remains backwards compatible with the old one. The introduced
two-word entry format, besides extending the limits imposed by the single-entry
layout, also includes a vdev field and some extra padding after its prefix.
The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps.
One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and
we wanted to fit the vdev field in the space map. In addition that gives us
some extra bits in dva_t.
illumos/illumos-gate@17f11284b4
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
When a ZFS volume is created with zfs create -V (but without -s), the
refreservation property is set to a value that is volsize plus the maximum
size of metadata. If refreservation is ever set to another value, it is
impossible to set it back to the automatically determined value. There are
other cases where refreservation may be wrong. These include receiving a
volume that was sent without properties and zfs clone.
We need:
zfs set refreservation=auto <volume>
zfs clone -o refreservation=auto <volume>
Each one would use the same function used by zfs create -V to determine the
proper value for refreservation.
illumos/illumos-gate@1c10ae76c0
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Mike Gerdts <mike.gerdts@joyent.com>
When a ZFS volume is created with zfs create -V (but without -s), the
refreservation property is set to a value that is volsize plus the maximum
size of metadata. If refreservation is ever set to another value, it is
impossible to set it back to the automatically determined value. There are
other cases where refreservation may be wrong. These include receiving a
volume that was sent without properties and zfs clone.
We need:
zfs set refreservation=auto <volume>
zfs clone -o refreservation=auto <volume>
Each one would use the same function used by zfs create -V to determine the
proper value for refreservation.
illumos/illumos-gate@1c10ae76c0
Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Mike Gerdts <mike.gerdts@joyent.com>
illumos/illumos-gate@b6bf6e1540
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@b6bf6e1540
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
TCP/IPv4 allows an implicit connection setup using sendto(), which
is used for TTCP and TCP fast open. This patch adds support for
TCP/IPv6.
While there, improve some tests for detecting multicast addresses,
which are mapped.
Reviewed by: bz@, kbowling@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16458
When sending TCP segments from the timewait code path, a stored
value of the last sent window is used. Use the same code for
computing this in the timewait code path as in the main code
path used in tcp_output() to avoiv inconsistencies.
Reviewed by: rrs@
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16503
The following issues are fixed:
* Whenever a TCP server with TCP fast open enabled, calls accept(),
recv(), send(), and close() before the TCP-ACK segment has been received,
the TCP connection is just dropped and the reception of the TCP-ACK
segment triggers the sending of a TCP-RST segment.
* Whenever a TCP server with TCP fast open enabled, calls accept(), recv(),
send(), send(), and close() before the TCP-ACK segment has been received,
the first byte provided in the second send call is not transferred.
* Whenever a TCP client with TCP fast open enabled calls sendto() followed
by close() the TCP connection is just dropped.
Reviewed by: jtl@, kbowling@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16485
Newer versions of gcc generate "set, but not used" warnings.
Add __unused macros to silence these warnings.
Although the variables are not being used, they are values parsed from
arguments to callback RPCs that might be needed in the future.
Requested by: mmacy
These missing probe are mostly in the syncache and timewait code.
Reviewed by: markj@, rrs@
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16369
The CORB and RIRB buffers exist in DMA memory, but the device reads them as
little-endian only. Read and write as LE into the DMA memory block, to work on
BE platforms.
`arc_reclaim_thread()` calls `arc_adjust()` after calling
`arc_kmem_reap_now()`; `arc_adjust()` signals `arc_get_data_buf()` to
indicate that we may no longer be `arc_is_overflowing()`.
The problem is, `arc_kmem_reap_now()` can take several seconds to
complete, has no impact on `arc_is_overflowing()`, but due to how the
code is structured, can impact how long the ARC will remain in the
`arc_is_overflowing()` state.
The fix is to use seperate threads to:
1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which
improves `arc_is_overflowing()`
2. keep enough free memory in the system, by calling
`arc_kmem_reap_now()` plus `arc_shrink()`, which improves
`arc_available_memory()`.
illumos/illumos-gate@de753e34f9
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Tim Kordas <tim.kordas@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Brad Lewis <brad.lewis@delphix.com>
The latter matches the rest of the tree better [0]. The UPDATING entry has
been updated to reflect this, and the new tunable is now documented in
loader(8) [1].
Reported by: imp [0], Shawn Webb [1]
As noted in UDPATING, the new loader tunable efi.rt_disabled may be used to
disable EFIRT at runtime. It should have no effect if you are not booted via
UEFI boot.
MFC after: 6 weeks
Leading up to enabling EFIRT in GENERIC, allow runtime services to be
disabled with a new tunable: efi.rt_disabled. This makes it so that EFIRT
can be disabled easily in case we run into some buggy UEFI implementation
and fail to boot.
Discussed with: imp, kib
MFC after: 1 week
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
Reuse of the index variable in two nested loops resulted in only the first
argument in the list being used (fine for gzip, not fine for zstd). Also
add tests for xz and zstd, and fix the COMPRESS_SUFFIX_MAXLEN macro.
Submitted by: dnelson_1901_yahoo.com
Differential Revision: https://reviews.freebsd.org/D16509
It's easy to confuse the error code as naked it looks decimal (EINVAL is
reported as error 16, instead of error 22, so first reading looks like EBUSY).
By default ld.lld should be the bootstrap linker (only) on i386 right
now. Once the i386 exp-run with LLD_IS_LD has a good result this will
also be enabled by default.
Reported by: andrew
Pointy hat to: emaste
modules. It also fails in the same way, we are unable to relocate static
variables as the compiler uses PC-relative loads with nothing for the
kernel linker to relocate.
Sponsored by: DARPA, AFRL
ian@ pointed out that in the test_abstime() function time(NULL) is
used twice; once in an "if" test and again in the enclosed error
message. If the true branch was taken and the process got preempted
before the second time(NULL) call, by the time the error message was
generated enough time could have elapsed that the message could claim
that the event came "too early" but print an event time that was after
the expected timeout. Correct by making the time(NULL) call only once
and using that returned time in both the "if" test and the error
message.
Reported by: ian@
MFC after: 4 days
X-MFC-with: r336761, r336781, r336802
Sponsored by: Dell EMC
Akin to r327783 for amd64. lld has been usable for amd64 for quite some
time, but a couple of issues remained that affected i386. These were
recently addressed upstream in lld and merged into FreeBSD or addressed
directly in FreeBSD (r326831, r326879, r326897, r326957, r333401,
r334626, r336664).
Similarly to the intial amd64 commit this change enables lld only as the
bootstrap linker (used to link the kernel and userland libraries and
executables), while GNU ld.bfd is still installed as /usr/bin/ld and
used for ports builds. That will be changed shortly, after an exp-run.
This is a recommit of r327823 after additional lld fixes.
PR: 225128 (exp-run)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This fixes the panic caused by deadlocking when grant-table free
callbacks are used.
The cause of the recursion is: check_free_callbacks() is always called
with the lock gnttab_list_lock held. In turn the callback function is
also called with the lock held. Then when the client uses any of the grant
reference methods which also attempt the lock the gnttab_list_lock
mutex from within the free callback a deadlock happens.
Fix this by making the gnttab_list_lock recursive.
Submitted by: Pratyush Yadav <pratyush@freebsd.org>
Differential Revision: https://reviews.freebsd.org/D16505
If gnttab_grant_foreign_access() fails for any of the indirection
pages, the code breaks out of both the loops without freeing the local
variable indirectpages, causing a memory leak.
Submitted by: Pratyush Yadav <pratyush@freebsd.org>
Differential Review: https://reviews.freebsd.org/D16136
Length is an unsigned integer, so checking against < 0 doesn't make
sense. While there also make clear that a length of 0 always succeeds.
Submitted by: Pratyush Yadav <pratyush@freebsd.org>
Differential Review: https://reviews.freebsd.org/D16045
sending an invalid segment into the reassembly
queue. This would happen if you enabled the
data after close option.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16453
