If port resume fails, likely the USB device is detached. Ignore such errors,
because else the USB stack might try forever trying to resume the device,
before it will proceed detaching it.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Eliminate shlq $3,address shift after masking of the va is done, which
is needed to convert pt_entry_t[] array index into byte offset.
Do it by preshifting the mask, and compensating the right shift of va.
Suggested by: alc
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33786
instead of only OBJ_ANON objects that are backing, as it is now.
This is required for e.g. vm_meter is_object_active() detection, and
should be useful in some more cases.
Use refcount KPI for all objects, regardless of owning the object lock,
and the fact that currently OBJ_ANON cannot change for the live object.
Noted and reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33549
Also add comment to the public header to avoid
making another conflict in future.
Reviewed by: jkim
Obtained from: OpenSSL commit 5d4975ecd88ac17d0749513a8fac9a7c7befd900
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D34135
This allows entering the debugger at the earliest possible time, if
the '-d' argument is passed to the kernel.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34120
TCP per RFC793 has 4 reserved flag bits for future use. One
of those bits may be used for Accurate ECN.
This patch is to include these bits in the LRO code to ease
the extensibility if/when these bits are used.
Reviewed By: hselasky, rrs, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34127
This fixes a -Wsign-compare error reported by GCC due to the two
results of the ternary operator having differing signedness.
Reviewed by: dougm, rlibby
Differential Revision: https://reviews.freebsd.org/D34122
6d4baa0d01 incorrectly rounded the lenght of the pflog header up to 8
bytes, rather than 4.
PR: 261566
Reported by: Guy Harris <gharris@sonic.net>
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
TLS RX support is modeled after TLS TX support. The basic structures and layouts
are almost identical, except that the send tag created filters RX traffic and
not TX traffic.
The TLS RX tag keeps track of past TLS records up to a certain limit,
approximately 1 Gbyte of TCP data. TLS records of same length are joined
into a single database record.
Regularly the HW is queried for TLS RX progress information. The TCP sequence
number gotten from the HW is then matches against the database of TLS TCP
sequence number records and lengths. If a match is found a static params WQE
is queued on the IQ and the hardware should immediately resume decrypting TLS
data until the next non-sequential TCP packet arrives.
Offloading TLS RX data is supported for untagged, prio-tagged, and
regular VLAN traffic.
MFC after: 1 week
Sponsored by: NVIDIA Networking
If the driver_version capability bit is enabled, send the driver
version to firmware after the init HCA command, for display purposes.
Example of driver version: "FreeBSD,mlx5_core,14.0.0,3.x-xxx"
Linux commits:
012e50e109fd27ff989492ad74c50ca7ab21e6a1
MFC after: 1 week
Sponsored by: NVIDIA Networking
Currently, unicast/multicast loopback raw ethernet (non-RDMA) packets
are sent back to the vport. A unicast loopback packet is the packet
with destination MAC address the same as the source MAC address. For
multicast, the destination MAC address is in the vport's multicast
filter list.
Moreover, the local loopback is not needed if there is one or none
user space context.
After this patch, the raw ethernet unicast and multicast local
loopback are disabled by default. When there is more than one user
space context, the local loopback is enabled.
Note that when local loopback is disabled, raw ethernet packets are
not looped back to the vport and are forwarded to the next routing
level (eswitch, or multihost switch, or out to the wire depending on
the configuration).
Linux commits:
c85023e153e3824661d07307138fdeff41f6d86a
8978cc921fc7fad3f4d6f91f1da01352aeeeff25
MFC after: 1 week
Sponsored by: NVIDIA Networking
This change adds convenience functions to setup a flow steering rule based on
a TCP socket. The helper function gets all the address information from the
socket and returns a steering rule, to be used with HW TLS RX offload.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Previously flow steering tables and rules were only created and destroyed
at link up and down events, respectivly. Due to new requirements for adding
TLS RX flow tables and rules, the main flow steering table must always be
available as there are permanent redirections from the TLS RX flow table
to the vlan flow table.
MFC after: 1 week
Sponsored by: NVIDIA Networking
All packets must go through the indirection table, RQT,
because it is not possible to modify the RQN of the TIR
for direct dispatchment after it is created, typically
when the link goes up and down.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Add support to map an SQ to a specific schedule queue using a
special WQE as performance enhancement.
SQ remap operation is handled by a privileged internal queue, IQ,
and the mapping is enabled from one rate to another.
The transition from paced to non-paced should however always go
through FW.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Internal send queues are regular sendqueues which are reserved for WQE commands
towards the hardware and firmware. These queues typically carry resync
information for ongoing TLS RX connections and when changing schedule queues
for rate limited connections.
The internal queue, IQ, code is more or less a stripped down copy
of the existing SQ managing code with exception of:
1) An optional single segment memory buffer which can be read or
written as a whole by the hardware, may be provided.
2) An optional completion callback for all transmit operations, may
be provided.
3) Does not support mbufs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Allocate the RQT once, pointing all initial entries to the drop RQN.
When opening the channels simplify modify the RQT, directing all traffic
to the new RQNs. Similarly when closing the channels point all RQT entries
back to the so-called drop RQN.
MFC after: 1 week
Sponsored by: NVIDIA Networking
What is a drop RQ and why is it needed?
The RSS indirection table, also called the RQT, selects the
destination RQ based on the receive queue number, RQN. The RQT is
frequently referred to by flow steering rules to distribute traffic
among multiple RQs. The problem is that the RQs cannot be destroyed
before the RQT referring them is destroyed too. Further, TLS RX
rules may still be referring to the RQT even if the link went
down. Because there is no magic RQN for dropping packets, we create
a dummy RQ, also called drop RQ, which sole purpose is to drop all
received packets. When the link goes down this RQN is filled in all
RQT entries, of the main RQT, so the real RQs which are about to be
destroyed can be released and the TLS RX rules can be sustained.
MFC after: 1 week
Sponsored by: NVIDIA Networking
During packet reception the network stack frequently transmit data in
response to TCP window updates. To reduce the number of transmit doorbells
needed, inhibit all transmit doorbells designated for the same channel until
after the reception of packets for the given channel is completed.
While at it slightly refactor the mlx5e_tx_notify_hw() function:
1) The doorbell information is always stored into sq->doorbell.d64 .
No need to pass a separate pointer to this variable.
2) Move checks for skipping doorbell writes inside this function.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Instead of allocating directly from a normal zone. This way
import and release are guaranteed to process all allocated and then
deallocated items. Also, the release occurs in a sleepable context when
caller of uma_zfree() or uma_zdestroy() can sleep itself.
MFC after: 1 week
Sponsored by: NVIDIA Networking
