by looking at the "type of number" field and providing configurable hooks
to correct the numbers accordingly. See keywords add-prefix, prefix-national
and prefix-international in isdnd.rc(5).
This feature was implemented by Christian Ullrich <chris@chrullrich.de>
enabled and the kernel provides the MAC registration and entry point
service. Declare a dependency on that module service for any
MAC module registered using mac_policy.h. For now, hard code the
version as 1, but once we've come up with a versioning policy, we'll
move to a #define of some sort. In the mean time, this will prevent
loading a MAC module when 'options MAC' isn't present, which (due to
a bug in the kernel linker) can result if the MAC module is preloaded
via loader.conf.
This particular evil recommended by: peter
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI LAbs
indicate that the calling code has already performed necessary MAC
checks (if any) for this operation. This flag will help resolve
layering problems that existing because vn_rdwr() is called both
on behalf of user processes directly (such as in system calls of
various sorts, during core dumps, etc), as well as deep in the file
system code on behalf of the file system (such as in UFS, ext2fs,
etc). Code that is acting on behalf of a kernel service rather
than explicitly on behalf of a user process will specify this flag.
By default, MAC checks will be performed (and generally should
be performed).
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
access control: as with SVR4, very few changes required since almost
all services are implemented by wrapping existing native FreeBSD
system calls. Only readdir() calls need additional instrumentation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
SVR4 emulation relating to readdir() and fd_revoke(). All other
services appear to be implemented by simply wrapping existing
FreeBSD native system call implementations, so don't require local
instrumentation in the emulator module.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
struct mount is not cached as *mp at this point, so use
vp->v_mount directly, following the check that it's non-NULL.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
This is an architecture that present a thing message passing interface
to the OS. You can query as to how many ports and what kind are attached
and enable them and so on.
A less grand view is that this is just another way to package SCSI (SPI or
FC) and FC-IP into a one-driver interface set.
This driver support the following hardware:
LSI FC909: Single channel, 1Gbps, Fibre Channel (FC-SCSI only)
LSI FC929: Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only)
LSI 53c1020: Single Channel, Ultra4 (320M) (Untested)
LSI 53c1030: Dual Channel, Ultra4 (320M)
Currently it's in fair shape, but expect a lot of changes over the
next few weeks as it stabilizes.
Credits:
The driver is mostly from some folks from Jeff Roberson's company- I've
been slowly migrating it to broader support that I it came to me as.
The hardware used in developing support came from:
FC909: LSI-Logic, Advansys (now Connetix)
FC929: LSI-Logic
53c1030: Antares Microsystems (they make a very fine board!)
MFC after: 3 weeks
thus hiting EIO at the end of file. This is believed to be a feature
(not a bug) of vn_rdwr(), so we turn it off by supplying aresid param.
Reviewed by: rwatson, dg
(I skipped those in contrib/, gnu/ and crypto/)
While I was at it, fixed a lot more found by ispell that I
could identify with certainty to be errors. All of these
were in comments or text, not in actual code.
Suggested by: bde
MFC after: 3 days
- Make getvfsbyname() take a struct xvfsconf *.
- Convert several consumers of getvfsbyname() to use struct xvfsconf.
- Correct the getvfsbyname.3 manpage.
- Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the
kernel, and rewrite getvfsbyname() to use this instead of the weird
existing API.
- Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist
sysctl.
- Convert a vfsload() call in nfsiod.c to kldload() and remove the useless
vfsisloadable() and endvfsent() calls.
- Add a warning printf() in vfs_sysctl() to tell people they are using
an old userland.
After these changes, it's possible to modify struct vfsconf without
breaking the binary compatibility. Please note that these changes don't
break this compatibility either.
When bp will have updated mount_smbfs(8) with the patch I sent him, there
will be no more consumers of the {set,get,end}vfsent(), vfsisloadable()
and vfsload() API, and I will promptly delete it.
sysctl_sysctl_next() to skip this sysctl. The sysctl is
still available, but doesn't appear in a "sysctl -a".
This is especially useful when you want to deprecate a sysctl,
and add a warning into it to warn users that they are using
an old interface. Without this flag, the warning would get
echoed when running "sysctl -a" (which happens at boot).
code to do it when the bios doesn't do it for us, flag it. Then, when
we dealloc, do an equal kludge to get rid of the address. This should
address the can't get IRQ and panic bug in a more graceful way.
# really should write a dealloc routine and just call it instead, since
# this might not fix things in the kldunload case.
The bugfix (ipfw2.c) makes the handling of port numbers with
a dash in the name, e.g. ftp-data, consistent with old ipfw:
use \\ before the - to consider it as part of the name and not
a range separator.
The new feature (all this description will go in the manpage):
each rule now belongs to one of 32 different sets, which can
be optionally specified in the following form:
ipfw add 100 set 23 allow ip from any to any
If "set N" is not specified, the rule belongs to set 0.
Individual sets can be disabled, enabled, and deleted with the commands:
ipfw disable set N
ipfw enable set N
ipfw delete set N
Enabling/disabling of a set is atomic. Rules belonging to a disabled
set are skipped during packet matching, and they are not listed
unless you use the '-S' flag in the show/list commands.
Note that dynamic rules, once created, are always active until
they expire or their parent rule is deleted.
Set 31 is reserved for the default rule and cannot be disabled.
All sets are enabled by default. The enable/disable status of the sets
can be shown with the command
ipfw show sets
Hopefully, this feature will make life easier to those who want to
have atomic ruleset addition/deletion/tests. Examples:
To add a set of rules atomically:
ipfw disable set 18
ipfw add ... set 18 ... # repeat as needed
ipfw enable set 18
To delete a set of rules atomically
ipfw disable set 18
ipfw delete set 18
ipfw enable set 18
To test a ruleset and disable it and regain control if something
goes wrong:
ipfw disable set 18
ipfw add ... set 18 ... # repeat as needed
ipfw enable set 18 ; echo "done "; sleep 30 && ipfw disable set 18
here if everything goes well, you press control-C before
the "sleep" terminates, and your ruleset will be left
active. Otherwise, e.g. if you cannot access your box,
the ruleset will be disabled after the sleep terminates.
I think there is only one more thing that one might want, namely
a command to assign all rules in set X to set Y, so one can
test a ruleset using the above mechanisms, and once it is
considered acceptable, make it part of an existing ruleset.
The CAM<>ATAPI layer was submitted by "Thomas Quinot <thomas@cuivre.fr.eu.org>"
changes form the version on the net by me (formatting, ability to be used
alone without the ATAPI native device driver, proper speed reporting...)
See /sys/conf/NOTES for usage.
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
#define EDOFUS 88 /* Programming error */
This can be used to signal error situations which indicate that the
program logic or assumptions is deficient.
appologize to those of you who may have been seeing crashes in
code that uses sendfile(2) or other types of external buffers
with mbufs.
Pointed out by, and provided trace:
Niels Chr. Bank-Pedersen <ncbp at bank-pedersen.dk>
VOP wrapper is called from within file systems so can result in odd
loopback effects when MAC enforcement is use with the active (as
opposed to saved) credential. These checks will be moved elsewhere.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
PR40430 by "Peter Haight <peterh@sapros.com>" that has semilar patches
included and which I merged with my own work.
HW sponsored by: FreeBSD Foundation & FreeBSD Mall Inc
Enjoy!
I'm not sure what happenned to the original setting of the P_CONTINUED
flag. it appears to have been lost in the paper shuffling...
Submitted by: David Xu <bsddiy@yahoo.com>
This is pretty much fixes any issue I can find:
- Watchdog timeouts were due to starting the TX DMA engine
before we had a packet ready for it. So the first packet
sent never got out only if we sent more then one packet
at a time did the others make it out and not blow up.
Of course reseting the chip then caused us not to transmit
the first packet again ie. catch-22. This required logic changes.
- Combine interrupts on TX packets being queued up.
- Don't keep running around the RX ring since we might get
out of sync so only go around once per receive
- Let the RX engine recover via the poll interface which is
similar to the TX interface. This way the chip wakes
up with no effort when we read enough packets.
- Do better hand-shaking on RX & TX packets so they don't
start of to soon.
- Force a duplex setting when the link comes up after
an ste_init or it will default to half-duplex and be
really slow. This only happens on subsequent ste_init.
The first one worked.
- Don't call stat_update for every overflow. We only monitor
the collisions so the tick interval is good enough for that.
Just read in the collision stats to minimize bus reads.
- Don't read the miibus every tick since it uses delays and
delays are not good for performance.
- Tie link events directly to the miibus code so the port
gets set correctly if someone changes the port settings.
- Reduce the extreme number of {R,T}FD's. They would consume
130K of kernel memory for each NIC.
- Set the TX_THRESH to wait for the DMA engine to complete
before running the TX FIFO. This hurts peak TX performance
but under bi-directional load the DMA engine can't keep up
with the FIFO. Testing shows that we end up in the case
anyways (a la dc(4) issues but worse since the RX engine hogs
everything).
- When stopping the card do a reset since the reset verifies the
card has stopped. Otherwise on heavy RX load the RX DMA engine
is still stuffing packets into memory. If that happens after
we free the DMA area memory bits get scribled in memory and
bad things happen.
This card still has seemingly unfixable issues under heavy RX load in
which the card takes over the PCI bus.
Sponsored by: Vernier Networks
MFC after: 1 week
argument, not the 'type' argument. As a result of the buf, the
MAC label on some packet header mbufs might not be set in mbufs
allocated using m_getcl(), resulting in a page fault.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
vnode operations. This permits the rights of the user (typically root)
used to turn on accounting to be used when writing out accounting entries,
rather than the credentials of the process generating the accounting
record. This fixes accounting in a number of environments, including
file systems that offer revocation support, MAC environments, some
securelevel scenarios, and in some NFS environments.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
the initproc credential from the proc0 credential. Otherwise, the
proc0 credential is used instead of initproc's credentil when authorizing
start_init() activities prior to initproc hitting userland for the
first time. This could result in the incorrect credential being used
to authorize mounting of the root file system, which could in turn cause
problems for NFS when used in combination with uid/gid ipfw rules, or
with MAC.
Discussed with: julian
Remove some unnecessary assignments to mbuf fields in sis_newbuf(),
the "length" fields are of no use while the mbuf is in the receive ring.
MFC after: 3 days
to parse the binary .kld file as a list of symbols. Fix this by
simply deleting the unwanted argument from the ARGV[] array instead
of trying to skip over it.
to the address of the user's aiocb rather than the kernel's aiocb. (In other
words, prior to this change, the ident field returned by kevent(2) on
completion of an AIO was effectively garbage.)
Submitted by: Romer Gil <rgil@cs.rice.edu>
cninit. This allows a console driver to replace the existing console
by calling cninit again, eg during the device probe. Otherwise the
multiple console code sends output to both, which is unfortunate if
they're using the same hardware.
about calls to SYSCTL_OUT() made with locks held if the buffer has not
been pre-wired. SYSCTL_OUT() should not be called while holding locks,
but if this is not possible, the buffer should be wired by calling
sysctl_wire_old_buffer() before grabbing any locks.
that LIO_READ and LIO_WRITE were requests for kevent()-based
notification of completion. Modify _aio_aqueue() to recognize LIO_READ
and LIO_WRITE.
Notes: (1) The patch provided by the PR perpetuates a second bug in this
code, a direct access to user-space memory. This change fixes that bug
as well. (2) This change is to code that implements a deprecated interface.
It should probably be removed after an MFC.
PR: kern/39556
- bus_space'ify
- generate fake ethernet address using read_random() instead of reading
from timer i/o ports
Other minor fixes:
- remove "hack" in connect_to_master()
- use M_ZERO
- remove unused variable in sbni_ioctl()
- properly release irq in sbni_attach_isa() on attach errors
and the AT24C08 small serial flash parts. We still report these as
the same part (since we group things already), but now we recognize
the small serial versions as well.
firmware revision as well (not sure which firmware versions are needed
for this, but the 6.x and 8.x 'software' versions that I have seem to
support it).
Add dBm comm quality RID. This is like the normal comm quality rid,
except the signal and noise numbers are normalized to dBm. Some
revisions of the prism firmware, however, don't support this RID, and
some that do support it return 0 for quality and/or noise. Your
milage may vary.
the mbuf contains the ethernet header (eh) as well, which ether_input()
will strip off as needed.
This permits the removal (in a backward compatible way) of the
header removal code which right now is replicated in all drivers,
sometimes in an inconsistent way. Also, because many functions
called after ether_input() require the eh in the mbuf, eventually
we can propagate the interface and handle outdated drivers just
in ether_input().
Individual driver changes to use the new interface will follow as
we have a chance to touch them.
NOTE THAT THIS CHANGE IS FULLY BACKWARD COMPATIBLE AND DOES NOT BREAK
BINARY COMPATIBILITY FOR DRIVERS.
MFC after: 3 days
Also take this chance to cleanup the code in fxp_intr_body.
Add a missing block of code to disable interrupts when
reinitializing the interface while doing polling (the RELENG_4
version was correct).
MFC after: 3 days
investigate the problem described below.
I am seeing some strange livelock on recent -current sources with
a slow box under heavy load, which disappears with this change.
This might suggest some kind of problem (either insufficient locking,
or mishandling of priorities) in the poll_idle thread.
- v_vflag is protected by the vnode lock and is used when synchronization
with VOP calls is needed.
- v_iflag is protected by interlock and is used for dealing with vnode
management issues. These flags include X/O LOCK, FREE, DOOMED, etc.
- All accesses to v_iflag and v_vflag have either been locked or marked with
mp_fixme's.
- Many ASSERT_VOP_LOCKED calls have been added where the locking was not
clear.
- Many functions in vfs_subr.c were restructured to provide for stronger
locking.
Idea stolen from: BSD/OS
missed the pmap_kenter/kremove in this file, which leads to read()/write()
of /dev/mem using stale TLB entries. (gah!) Fortunately, mmap of /dev/mem
wasn't affected, so it wasn't as bad as it could have been. This throws
some light on the 'X server affects stability' thread....
Pointed out by: bde
cards. Since the firmware is hard coded into the kernel, I've made it
a kernel option (WI_SYMBOL_FIRMWARE).
Note: This only downloads into the RAM of these cards. It doesn't
download into FLASH, and is somewhat limited. There needs to be a
better way to deal, but this works for now. My Symbol LA4132 CF card
works now.
Obtained from: NetBSD
linker_load_module() instead.
This fixes a bug where the kernel was unable to properly locate and
load a kernel module in vfs_mount() (and probably in the netgraph
code as well since it was using the same function). This is because
the linker_load_file() does not properly search the module path.
Problem found by: peter
Reviewed by: peter
Thanks to: peter
kernel access control.
When generating nd6 output on an interface, label the packet
appropriately.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
case, also preserve the MAC label. Note that this mbuf allocation
is fairly non-optimal, but not my fault.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
