boot/mips/beri/loader/metadata.c allow FDT configuration to set
command line options.
This leads to an interesting quesiton of future interactions with loader.
However for configurations without loader this allows bootverbose or boot
single user to be set by compiling a new kernel, which is good enough for
testing and debugging.
Reviewed by: rwatson
MFC after: 1 week
NetFPGA-10G Embedded CPU Ethernet Core.
The current version operates on a simple PIO based interface connected
to a NetFPGA-10G port.
To avoid confusion: this driver operates on a CPU running on the FPGA,
e.g. BERI/mips, and is not suited for the PCI host interface.
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA/AFRL
Remove the uart support in favour of a "jtag-uart" interface imitation
providing a much simpler interface, directly exported to the host,
allowing the toolchain to be shared with BERI on Altera. [1]
Submitted by: Jong Hun HAN (jong.han cl.cam.ac.uk) [1]
MFC after: 2 weeks
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
chips have more.
So for now, let's allow more. We should teach the apb code to just
reject interrupts that lie outside what the chip can do at runtime.
later. If the interrupts are ACKed even if they're not masked, we get
the interrupts again later. Grr.
* The AR724x and later chips want the interrupt bits cleared by writing the
relevant bit to it, NOT by writing all but the current interrupt to it.
Tested:
* AR9344, DB120 reference board
TODO:
* Test ar724x and later chips to ensure no regressions have occured.
'eeprommac'.
The existing driver would just make arge units past 0 take the primary
MAC and increment it by the unit number, without correct address wrapping.
That has to be fixed at a later date.
Tested:
* Atheros DB120 reference obard
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
interface, in the r241616 a crutch was provided. It didn't work well, and
finally we decided that it is time to break ABI and simply make if_baudrate
a 64-bit value. Meanwhile, the entire struct if_data was reviewed.
o Remove the if_baudrate_pf crutch.
o Make all fields of struct if_data fixed machine independent size. The
notion of data (packet counters, etc) are by no means MD. And it is a
bug that on amd64 we've got a 64-bit counters, while on i386 32-bit,
which at modern speeds overflow within a second.
This also removes quite a lot of COMPAT_FREEBSD32 code.
o Give 16 bit for the ifi_datalen field. This field was provided to
make future changes to if_data less ABI breaking. Unfortunately the
8 bit size of it had effectively limited sizeof if_data to 256 bytes.
o Give 32 bits to ifi_mtu and ifi_metric.
o Give 64 bits to the rest of fields, since they are counters.
__FreeBSD_version bumped.
Discussed with: emax
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
There's plenty of hints that I haven't yet fleshed out and are hardcoded
in arswitch_8327.c. They're listed here (from OpenWRT) for completeness.
This is enough to get the thing up, running and pinging.
Note that the mdiobus for the on-switch switch changes - the AR8327
probes first, which exposes mdio1, and thus the arge1 mdiobus will probe
and attach as mdio2. That is what the AR9344 on-chip switch has to
attach to.
Tested:
* Qualcomm Atheros DB120
The on-board NIC is an 3x3 AR9380 with 5GHz only.
* enable pci code in AR9344_BASE
* enable ath_pci and the firmware loading bits in DB120
* add in the relevant hints in DB120.hints to inform the probe/attach
code where the PCIe fixup data is for the onboard chip.
This is only relevant for a default development board. I also have a
DB120 with the on-board PCIe wifi NIC disabled and it's exposed as
a real PCIe slot (to put normal PCIe NICs in); the fixup code will need
to be disabled to make this work correctly.
Tested:
* DB120
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
Reviewed by: imp, ian
to check the status property in their probe routines.
Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352. Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.
Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
get the Routerboard 800 up and running with the vendor device tree. This
does not implement some BERI-specific features (which hopefully won't be
necessary soon), so move the old code to mips/beri, with a higher attach
priority when built, until MIPS interrupt domain support is rearranged.
console, it calls the grab functions. These functions should turn off
the RX interrupts, and any others that interfere. This makes mountroot
prompt work again. If there's more generalized need other than
prompting, many of these routines should be expanded to do those new
things.
Reviewed by: bde (with reservations)
The uboot mapping is only 128KiB (0x20000) and not 2MiB (0x200000).
Dynamically adjust kernel and rootfs mappings based on the
geom_uncompress(4) magic.
This makes the built images more reliable by accepting changes on kernel
size transparently and matches the images built with zrouter and
freebsd-wifi-build.
Tested by: gjb
Approved by: adrian (mentor)
Obtained from: Zrouter
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
(aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
requests to its parent (nexus). This allows x86 FDT devices to allocate
both memory and IO requests and removes the last notionally MI use of
fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
FDT_MAP_IRQ and FDT_INTR_MAX have been removed.
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
words, every architecture is now auto-sizing the kmem arena. This revision
changes kmeminit() so that the definition of VM_KMEM_SIZE_SCALE becomes
mandatory and the definition of VM_KMEM_SIZE becomes optional.
Replace or eliminate all existing definitions of VM_KMEM_SIZE. With
auto-sizing enabled, VM_KMEM_SIZE effectively became an alternate spelling
for VM_KMEM_SIZE_MIN on most architectures. Use VM_KMEM_SIZE_MIN for
clarity.
Change kmeminit() so that the effect of defining VM_KMEM_SIZE is similar to
that of setting the tunable vm.kmem_size. Whereas the macros
VM_KMEM_SIZE_{MAX,MIN,SCALE} have had the same effect as the tunables
vm.kmem_size_{max,min,scale}, the effects of VM_KMEM_SIZE and vm.kmem_size
have been distinct. In particular, whereas VM_KMEM_SIZE was overridden by
VM_KMEM_SIZE_{MAX,MIN,SCALE} and vm.kmem_size_{max,min,scale}, vm.kmem_size
was not. Remedy this inconsistency. Now, VM_KMEM_SIZE can be used to set
the size of the kmem arena at compile-time without that value being
overridden by auto-sizing.
Update the nearby comments to reflect the kmem submap being replaced by the
kmem arena. Stop duplicating the auto-sizing formula in every machine-
dependent vmparam.h and place it in kmeminit() where auto-sizing takes
place.
Reviewed by: kib (an earlier version)
Sponsored by: EMC / Isilon Storage Division
fdtbus in most cases. This brings ARM and MIPS more in line with existing
Open Firmware platforms like sparc64 and powerpc, as well as preventing
double-enumeration of the OF tree on embedded PowerPC (first through nexus,
then through fdtbus).
This change is also designed to simplify resource management on FDT platforms
by letting there exist a platform-defined root bus resource_activate() call
instead of replying on fdtbus to do the right thing through fdt_bs_tag.
The OFW_BUS_MAP_INTR() and OFW_BUS_CONFIG_INTR() kobj methods are also
available to implement for similar purposes.
Discussed on: -arm, -mips
Tested by: zbb, brooks, imp, and others
MFC after: 6 weeks
corresponding x86 trap type. Userland DTrace probes are currently handled
by the other fasttrap hooks (dtrace_pid_probe_ptr and
dtrace_return_probe_ptr).
Discussed with: rpaulo
return BUS_PROBE_NOWILDCARD from their probe routines to avoid claiming
wildcard devices on their parent bus. Do a sweep through the MIPS tree.
MFC after: 2 weeks
vm_pages. Provide trivial implementation which forwards the load to
_bus_dmamap_load_phys() page by page. Right now all architectures use
bus_dmamap_load_ma_triv().
Tested by: pho (as part of the functional patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
board.
This is another AR9331 board similar to the Carambola2. It has different
ethernet and LED wiring though.
They make a variety of boards that mostly differ on the amount of RAM/flash
available. Alfa Networks graciously donated a handful of 64MB RAM/16MB flash
boards so I can finish off 802.11s support for the AR93xx chips and do up
a tech demonstration with it.
This is enough to bring up the board.
Tested:
* Alfa networks UB Hornet board - 64MB ram, 16MB flash version.
Thankyou to Alfa Networks for the development boards!
Sponsored by: Alfa Networks (hardware only)
Change 221534 by rwatson@rwatson_zenith_cl_cam_ac_uk on 2013/01/27 16:05:30
FreeBSD/mips stores page-table entries in a near-identical format
to MIPS TLB entries -- only it overrides certain "reserved" bits
in the MIPS-defined EntryLo register to hold software-defined bits
(swbits) to avoid significantly increasing the page table memory
footprint. On n32 and n64, these bits were (a) colliding with
MIPS64r2 physical memory extensions and (b) being improperly
cleared.
Attempt to fix both of these problems by pushing swbits further
along 64-bit EntryLo registers into the reserved space, and
improving consistency between C-based and assembly-based clearing
of swbits -- in particular, to use the same definition. This
should stop swbits from leaking into TLB entries -- while ignored
by most current MIPS hardware, this would cause a problem with
(much) larger physical memory sizes, and also leads to confusing
hardware-level tracing as physical addresses contain unexpected
(and inconsistent) higher bits.
Discussed with: imp, jmallett
Change 1187301 by brooks@brooks_zenith on 2013/10/23 14:40:10
Loop back the initial commit of 221534 to HEAD. Correct its
implementation for mips32.
MFC after: 3 days
Sponsored by: DARPA/AFRL
Change 221767 by rwatson@rwatson_zenith_cl_cam_ac_uk on 2013/02/05 14:18:53
When printing out information on a TLB MOD exception for a user
process (e.g., an attempt to write to a read-only page), report
it as a "write" in the console message, rather than "unknown".
Change 221768 by rwatson@rwatson_zenith_cl_cam_ac_uk on 2013/02/05 14:28:00
Fix post-compile but pre-commit typo in last changeset.
MFC after: 3 days
Sponsored by: DARPA/AFRL
Change 231031 by brooks@brooks_zenith on 2013/07/11 16:22:08
Turn the unused and uncompilable MIPS_DISABLE_L1_CACHE define in
cache.c into an option and when set force I- and D-cache line
sizes to 0 (the latter part might be better as a tunable).
Fix some casts in an #if 0'd bit of code which attempts to
disable L1 cache ops when the cache is coherent.
Sponsored by: DARPA/AFRL
Change 228019 by bz@bz_zenith on 2013/04/23 13:55:30
Add kernel side support for large TLB on BERI/CHERI.
Modelled similar to NLM
MFC after: 3 days
Sponsored by: DAPRA/AFRL
Change 221534 by rwatson@rwatson_zenith_cl_cam_ac_uk on 2013/01/27 16:05:30
FreeBSD/mips stores page-table entries in a near-identical format
to MIPS TLB entries -- only it overrides certain "reserved" bits
in the MIPS-defined EntryLo register to hold software-defined bits
(swbits) to avoid significantly increasing the page table memory
footprint. On n32 and n64, these bits were (a) colliding with
MIPS64r2 physical memory extensions and (b) being improperly
cleared.
Attempt to fix both of these problems by pushing swbits further
along 64-bit EntryLo registers into the reserved space, and
improving consistency between C-based and assembly-based clearing
of swbits -- in particular, to use the same definition. This
should stop swbits from leaking into TLB entries -- while ignored
by most current MIPS hardware, this would cause a problem with
(much) larger physical memory sizes, and also leads to confusing
hardware-level tracing as physical addresses contain unexpected
(and inconsistent) higher bits.
Discussed with: imp, jmallett
MFC after: 3 days
Sponsored by: DARPA/AFRL
Switch the majority of device configuration to FDT from hints.
Add BERI_*_BASE configs to reduce duplication in the MDROOT and SDROOT
kernels.
Add NFS and GSSAPI support by default.
MFC after: 3 days
Sponsored by: DARPA/AFRL
230523, 1123614
Implement a driver for Robert Norton's PIC as an FDT interrupt
controller. Devices whose interrupt-parent property points to a beripic
device will have their interrupt allocation, activation , and setup
operations routed through the IC rather than down the traditional bus
hierarchy.
This driver largely abstracts the underlying CPU away allowing the
PIC to be implemented on CPU's other than BERI. Due to insufficient
abstractions a small amount of MIPS specific code is currently required
in fdt_mips.c and to implement counters.
MFC after: 3 days
Sponsored by: DARPA/AFRL
the cfi(4) driver. It remained in the tree longer than would be ideal
due to the time required to bring cfi(4) to feature parity.
Sponsored by: DARPA/AFRL
MFC after: 3 days
221804, 221805, 222004, 222006, 222055, 222820, 1135077, 1135118, 1136259
Add atse(4), a driver for the Altera Triple Speed Ethernet MegaCore.
The current driver support gigabit Ethernet speeds only and works with
the MegaCore only in the internal FIFO configuration in the soon to be
open sourced BERI CPU configuration.
Submitted by: bz
MFC after: 3 days
Sponsored by: DARPA/AFRL
Change 227630 by bz@bz_zenith on 2013/04/12 08:50:27
Implement soft reset setting sr in sr and just in case loop
endlessly afterwards.
MFC after: 3 days
Sponsored by: DARPA/AFRL
The MDIO bus frequency is configured as a divisor off of the MDIO bus
reference clock. For the AR9344 and later, the MDIO bus frequency can
be faster than normal (ie, up to 100MHz) and thus a static divisor may
not be very applicable.
So, for those boards that may require an actual frequency to be selected
regardless of what crazy stuff the vendor throws in uboot, one can now
set the MDIO bus frequency. It uses the MDIO frequency and the target
frequency to choose a divisor that doesn't exceed the target frequency.
By default it will choose:
* DIV_28 on everything; except
* DIV_58 on the AR9344 to be conservative.
Whilst I'm here, add some comments about the defaults being not quite
right. For the other internal switch devices (like the AR933x, AR724x)
the divisor can be higher - it's internal and the reference MDIO clock
is much lower than 100MHz.
The divisor tables and loop code is inspired from Linux/OpenWRT. It's very
simple; I didn't feel that reimplementing it would yield a substantially
different solution.
Tested:
* AR9331 (mips24k)
* AR9344 (mips74k)
Obtained from: Linux/OpenWRT
we can now add all the hardware bits for the DB120.
* arge0/argemdio0 is hooked up to an AR8327 switch - which there's currently
no support for. However, the bootloader on this board does set it up as
a basic switch so we can at least _use_ it ourselves.
So we should at least configure the arge0 side of things, including the GMAC
register.
* .. the GMAC config peels off arge0 from the internal switch and exposes it
as an RGMII to said AR8327.
* arge1/argemdio1 are hooked up to an internal 10/100 switch. So, that also
needs configuring.
* Add support for the NOR flash layout.
* Add support for the wifi (which works, with bugs, but it works.)
What's missing!
* No GPIO stuff yet!
* No sound (I2S) and no NAND flash support yet, sorry!
* The normal DB120 has an external AR95xx wifi chip on PCIe but with the
actual calibration data in the NOR flash. My DB120 has been modified
to let me use the PCIe slot as a normal PCIe slot. I'll add the "default"
settings later when I have access to a non-modified one.
* Other stuff, like why the wifi unit gets upset and spits out stuck beacons
and interrupt storms everywhere. Sigh.
Tested:
* DB120 board - AR9344 (mips74k SoC) booting off of SPI flash into multi-user
mode.
up and running.
* The MAC FIFO configurations needed updating;
* Reset the MDIO block at the same time the MAC block is reset;
* The default divisor needs changing as the DB120 runs at a higher
base MDIO bus clock compared to other chips.
The long-term fix is to allow the system to have a target MDIO bus
clock rate and then calculate the most suitable divider to meet
that. This will likely need implementing before stable external
PHY or switch support can be committed.
Tested:
* AR9344 (mips74k)
* AR9331 (mips24k)
Without correct barriers, this code just plain doesn't work on the
mips74k cores (specifically the AR9344.)
In particular, the MDIO register accesses need this barriering or MII bus
access results in out-of-order garbage.
Tested:
* AR9344 (mips74k)
* AR9331 (mips24k)
This is required for correct, stable operation on the MIPS74k SoCs
that are dual-issue, superscalar pipelines.
Tested:
* AR9344 SoC (MIPS74k)
* AR9331 SoC (MIPS24k)
* Add the MDIO clock probe during clock initialisation;
* Update the ethernet PLL configuration function to use the correct
values;
* Add a GMAC block configuration to pull the configuration out of hints;
* Add an ethernet switch reconfiguration method.
Tested:
* AR9344 SoC (DB120)
.. however, this has been tested with extra patches in my tree (to fix
the ethernet/MDIO support, SPI support, ethernet switch support)
and thus it isn't enough to bring the full board support up.
* Initialise the MDIO clock to default to the reference clock;
* Add some code to allow the hints mechanism to allow setup of the GMAC
config block.
* Document how the switch is wired up internally.
Tested:
* AR9331 SoC (Carambola 2)
* Print out the platform frequency the same as the other frequencies.
* Print out the MDIO frequency.
* Optionally do GMAC and ethernet switch setup if required.
Tested:
* AR9344
switch reset/initialise functions.
The AR934x and QC955x SoCs both have a configurable MDIO base clock.
The others have the MDIO clock use the same clock as the system
reference clock, whatever that may be.
Tested:
* AR9344 SoC
TODO:
* mips24k - AR933x would be fine for now, just to ensure that things
are sane.
control block.
The GMAC configuration block allows for some configuration of how
the GMAC0 (ie, arge0) port is connected to the on-board switch
(if indeed there is one.) It both can be pushed into the on-board
switch; it could also be torn out and exposed via an external
MII (and that operational mode is also controllable.)
Obtained from: Linux/OpenWRT
Refactor of /dev/random device. Main points include:
* Userland seeding is no longer used. This auto-seeds at boot time
on PC/Desktop setups; this may need some tweeking and intelligence
from those folks setting up embedded boxes, but the work is believed
to be minimal.
* An entropy cache is written to /entropy (even during installation)
and the kernel uses this at next boot.
* An entropy file written to /boot/entropy can be loaded by loader(8)
* Hardware sources such as rdrand are fed into Yarrow, and are no
longer available raw.
------------------------------------------------------------------------
r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines
Add a RANDOM_RWFILE option and hide the entropy cache code behind it.
Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA.
Add the RANDOM_* options to LINT.
------------------------------------------------------------------------
r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines
Define RANDOM_PURE_RNDTEST for rndtest(4).
------------------------------------------------------------------------
r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines
staticize struct random_hardware_source
------------------------------------------------------------------------
r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines
Wrap some policy-rich code in 'if NOTYET' until we can thresh out
what it really needs to do.
------------------------------------------------------------------------
r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines
Re-add /dev/urandom for compatibility purposes.
------------------------------------------------------------------------
r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines
Add missing include guards and move the existing ones out of the
implementation namespace.
------------------------------------------------------------------------
r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines
Fix some just-noticed problems:
o Allow this to work with "nodevice random" by fixing where the
MALLOC pool is defined.
o Fix the explicit reseed code. This was correct as submitted, but
in the project branch doesn't need to set the "seeded" bit as this
is done correctly in the "unblock" function.
o Remove some debug ifdeffing.
o Adjust comments.
------------------------------------------------------------------------
r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines
Time to eat crow for me.
I replaced the sx_* locks that Arthur used with regular mutexes;
this turned out the be the wrong thing to do as the locks need to
be sleepable. Revert this folly.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (In original diff)
------------------------------------------------------------------------
r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines
Add YARROW_RNG and FORTUNA_RNG to sys/conf/options.
Add a SYSINIT that forces a reseed during proc0 setup, which happens
fairly late in the boot process.
Add a RANDOM_DEBUG option which enables some debugging printf()s.
Add a new RANDOM_ATTACH entropy source which harvests entropy from the
get_cyclecount() delta across each call to a device attach method.
------------------------------------------------------------------------
r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines
Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use
EVENTHANDLER(mountroot) instead.
This means we can't count on /var being present, so something will
need to be done about harvesting /var/db/entropy/... .
Some policy now needs to be sorted out, and a pre-sync cache needs
to be written, but apart from that we are now ready to go.
Over to review.
------------------------------------------------------------------------
r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines
Snapshot.
Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8)
preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
------------------------------------------------------------------------
r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines
Fix up the man page for random(4). This mainly removes no-longer-relevant
details about HW RNGs, reseeding explicitly and user-supplied
entropy.
------------------------------------------------------------------------
r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines
As userland writing to /dev/random is no more, remove the "better
than nothing" bootstrap mode.
Add SWI harvesting to the mix.
My box seeds Yarrow by itself in a few seconds! YMMV; more to follow.
------------------------------------------------------------------------
r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines
Debug run. This now works, except that the "live" sources haven't
been tested. With all sources turned on, this unlocks itself in
a couple of seconds! That is no my box, and there is no guarantee
that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
------------------------------------------------------------------------
r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines
Don't use the "real" assembler mnemonics; older compilers may not
understand them (like when building CURRENT on 9.x).
# Submitted by: Konstantin Belousov <kostikbel@gmail.com>
------------------------------------------------------------------------
r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines
SNAPSHOT.
Simplify the malloc pools; We only need one for this device.
Simplify the harvest queue.
Marginally improve the entropy pool hashing, making it a bit faster
in the process.
Connect up the hardware "live" source harvesting. This is simplistic
for now, and will need to be made rate-adaptive.
All of the above passes a compile test but needs to be debugged.
------------------------------------------------------------------------
r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines
Snapshot. This passes the build test, but has not yet been finished or debugged.
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
------------------------------------------------------------------------
r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines
Yarrow wants entropy estimations to be conservative; the usual idea
is that if you are certain you have N bits of entropy, you declare
N/2.
------------------------------------------------------------------------
r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines
Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the
usual harvest queues. It was a nifty idea, but too heavyweight.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines
Separate out the Software RNG entropy harvesting queue and thread
into its own files.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines
Remove the short-lived namei experiment.
------------------------------------------------------------------------
r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines
Snapshot; Do some running repairs on entropy harvesting. More needs
to follow.
------------------------------------------------------------------------
r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines
Snapshot of current work;
1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific
or close enough to the Yarrow algorithm. For the rest use a neutral
name.
2) Tidy up headers; put private stuff in private places. More could
be done here.
3) Streamline the hashing/encryption; no need for a 256-bit counter;
128 bits will last for long enough.
There are bits of debug code lying around; these will be removed
at a later stage.
------------------------------------------------------------------------
r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines
1) example (partially humorous random_adaptor, that I call "EXAMPLE")
* It's not meant to be used in a real system, it's there to show how
the basics of how to create interfaces for random_adaptors. Perhaps
it should belong in a manual page
2) Move probe.c's functionality in to random_adaptors.c
* rename random_ident_hardware() to random_adaptor_choose()
3) Introduce a new way to choose (or select) random_adaptors via tunable
"rngs_want" It's a list of comma separated names of adaptors, ordered
by preferences. I.e.:
rngs_want="yarrow,rdrand"
Such setting would cause yarrow to be preferred to rdrand. If neither of
them are available (or registered), then system will default to
something reasonable (currently yarrow). If yarrow is not present, then
we fall back to the adaptor that's first on the list of registered
adaptors.
4) Introduce a way where RNGs can play a role of entropy source. This is
mostly useful for HW rngs.
The way I envision this is that every HW RNG will use this
functionality by default. Functionality to disable this is also present.
I have an example of how to use this in random_adaptor_example.c (see
modload event, and init function)
5) fix kern.random.adaptors from
kern.random.adaptors: yarrowpanicblock
to
kern.random.adaptors: yarrow,panic,block
6) add kern.random.active_adaptor to indicate currently selected
adaptor:
root@freebsd04:~ # sysctl kern.random.active_adaptor
kern.random.active_adaptor: yarrow
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
Submitted by: Dag-Erling Smørgrav <des@FreeBSD.org>, Arthur Mesh <arthurmesh@gmail.com>
Reviewed by: des@FreeBSD.org
Approved by: re (delphij)
Approved by: secteam (des,delphij)
* the mips74k cores only need EHB (which is 'sll $0, $0, 3')
here; NOPs don't actually work.
* add EHB as the last NOP for the default barriers/hazards;
that is "better" behaviour and should work on a wider
variety of processors.
This allows the existing (icky) TLB code to work, allowing
the AR9344 SoC (mips74k) to actually get through kernel startup.
Tested:
* AR9344 SoC - (mips74k)
* AR9331 SoC - (mips24k)
TODO:
* test on mips4k CPUs, just to be sure.
* document that sll $0, $0, 3 is actually "EHB" and that it
falls back to being a NOP for pre-mips32r1.
* mips24k has an errata that we currently don't correctly explicitly
state - ie, that after DERET/ERET, the only valid instruction is
a NOP.
Reviewed by: imp@
Approved by: re@ (gjb)
The changes are to:
* Use contigmalloc/contigfree which handling microcode buffer
* Use a different buffer to send microcode to each engine
* Swap microcode in little-endian compilation
* Fix freeback message queue id field
* Simplify xlp_get_rsa_opsize() to remove unnecessary checks
* Fix NULL check after use in xlp_free_cmd_params()
* Do better error handling when the hardware returns error
* Fix error codes in few cases
Submitted by: Vekatesh J. V. <venkatesh.vivekanandan@broadcom.com>
Approved by: re (hrs)
Updates to the Netlogic XLP on-chp RSA block driver. The changes are
to follow style(9) guidelines, to improve readability and to remove
unnecessary initialization.
No changes to logic have been introduced by this commit.
Submitted by: Venkatesh J. V. <venkatesh.vivekanandan@broadcom.com>
Approved by: re (hrs)
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
there as "kern.ipc.sendfile.readahead".
- Push all nsfbuf related tunables into MD code. Don't move them
to new namespace in favor of POLA.
Reviewed by: scottl
Approved by: re (gjb)
pmap_clear_reference() has had exactly one caller in the kernel for
several years, more precisely, since FreeBSD 8. Now, that call no
longer exists.
Approved by: re (kib)
Sponsored by: EMC / Isilon Storage Division
wireless home router.
Notable things:
2x 16 MB flash devices
Atheros Wireless
Atheros Switching
Many thanks to adrian@ for his guidance on this and keeping the drivers in
the base system up to date
Approved by: re (delphij)
Changes are to
- update board and network interface detection logic
- fix reading onboard CPLD in little-endian config
- print NAE frequency conrrectly for Bx chips
- update XAUI config to disable Rx/Tx until interface is up
Submitted by: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Use a variant of mips libc memcpy for kernel. This implementation uses
64-bit operations when compiled for 64-bit, and is significantly faster
in that case.
Submitted by: Tanmay Jagdale <tanmayj@broadcom.com>
add some packet(s) to tx ring and arge_stop() is called before receive the
sent packet interrupt from hardware. Fix arge_stop() to unload the in use
dma tags and free the associated mbuf.
PR: 178319, 163670
Approved by: adrian (mentor)
sf_buf_alloc()/sf_buf_free() inlines, to save two calls to an absolutely
empty functions.
Reviewed by: alc, kib, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
This is a nice small outdoor/indoor AP from Ubiquity Networks.
The device has:
AR7241 CPU SoC
AR9287 Wifi
8MB flash
32MB RAM
wifi has been tested to work along with leds.
Submitted by: loos
Approved by: sbruno (mentor, implicit)
Tested by: hiren
MADV_DONTNEED) and madvise(..., MADV_FREE). Specifically, introduce a new
pmap function, pmap_advise(), that operates on a range of virtual addresses
within the specified pmap, allowing for a more efficient implementation of
MADV_DONTNEED and MADV_FREE. Previously, the implementation of
MADV_DONTNEED and MADV_FREE relied on per-page pmap operations, such as
pmap_clear_reference(). Intuitively, the problem with this implementation
is that the pmap-level locks are acquired and released and the page table
traversed repeatedly, once for each resident page in the range
that was specified to madvise(2). A more subtle flaw with the previous
implementation is that pmap_clear_reference() would clear the reference bit
on all mappings to the specified page, not just the mapping in the range
specified to madvise(2).
Since our malloc(3) makes heavy use of madvise(2), this change can have a
measureable impact. For example, the system time for completing a parallel
"buildworld" on a 6-core amd64 machine was reduced by about 1.5% to 2.0%.
Note: This change only contains pmap_advise() implementations for a subset
of our supported architectures. I will commit implementations for the
remaining architectures after further testing. For now, a stub function is
sufficient because of the advisory nature of pmap_advise().
Discussed with: jeff, jhb, kib
Tested by: pho (i386), marcel (ia64)
Sponsored by: EMC / Isilon Storage Division
(re)start the interface when it is down. This change fix a race with
BOOTP where the response packet is lost because the interface is being
reset by a netmask change right after send the packet.
PR: 178318
Approved by: adrian (mentor)
- Route PCI interrupt for NIC
- Make "no mapping" warning more user-friendly: add device name and mention
that it's IRQ mapping
- Do not overlap ICUs' IO window with PCI devices' IO windows by starting
IO rman at offset 0x100
form xx:xx:xx:xx:xx:xx complete with ":" characters taking of 18 bytes
instead of 6 integers. Expose a "readascii" tuneable to handle this case.
Remove restriction on eepromac assignement for the first dev instance only.
Add eepromac address for DIR-825 to hints file.
Add readascii hint for DIR-825
Reviewed by: adrian@
which is the part of struct vmspace, allocated from UMA_ZONE_NOFREE
zone. Initialize the pmap lock in the vmspace zone init function, and
remove pmap lock initialization and destruction from pmap_pinit() and
pmap_release().
Suggested and reviewed by: alc (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
DB120 development board.
The AR934x SoCs are a MIPS74k based system with increased RAM addressing
space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3
on-board dual-band wifi.
This support isn't complete by any stretch; it's just enough to bring
the board up for others to tinker with. Notably, the MIPS74k support
is broken. However it boots enough to echo some basic probe/attach
messages, before dying somewhere in the TLB code.
Thankyou to Qualcomm Atheros for their continued support of me doing
open source work with their hardware.
Tested:
* AR9344, mips74k
This code reads the PLL configuration registers and correctly programs
things so the UART and such can come up.
There's MIPS74k platform issues that need fixing; but this at least brings
things up enough to echo stuff out the serial port and allow for interactive
debugging with ddb.
Tested:
* AR71xx SoCs
* AR933x SoC
* AR9344 board (DB120)
Obtained from: Qualcomm Atheros; Linux/OpenWRT
For all pre-AR933x chips, the frequency is just the APB frequency.
For the AR933x, the UART frequency is different but we just hacked around
it.
For the AR934x, there's a different PLL setting for these, so they have
to be broken out.
They originated in the original Octeon port. They weren't present, as
far as I can tell, on the projects/mips branch until after this
point. They were in the original Octeon port in code picked up from
the vendor, who I've been able to find out trolling old email put them
there to get around an SMP problem that most likely was fixed in other
ways.
NetBSD and Linux don't have these, except for some specific uses of
SYNC on the alchemy parts (which we don't support, but even if we did
it is only a specific case and would be specifically coded
anyway). This is true of the current Linux code, as well as one old
version I polled.
I looked back at the old R12000, R8000, R6000, R4000, R4400 errata
that I have, and could find no mention of SYNC needing NOPs for
silicon bugs (although plenty of other cases where NOPs and other
contortions were needed).
An Google search turned up no old mailing list discussions on this on
Linux, NetBSD or FreeBSD (except the disussion that kicked off these
studies).
I've test booted this on my Octeon Plus eval board and survived a
buildworld. Adrian Chadd reports that this patch has no ill effects on
the Ahteros platforms he tested it on.
I conclude it is safe to just remove the NOPs. But added
__MIPS_PLATFORM_SYNC_NOPS as a failsafe in case we find some platform
where these are, in fact, required.
Reviewed by: adrian@
This is an AR7240 based device with an AR9285 on-board.
I've tested the initial boot and wifi support; however at the moment
the ethernet switch driver doesn't seem to be picking up carrier on the
active ethernet port. Basic flood pinging works however, so I think
we're on the right track.
Thank you to Adrian Woodley <adrian@diskworld.com.au> for purchasing me
one of these devices to bootstrap FreeBSD-HEAD on.
Issues were noted by Bruce Evans and are present on all architectures.
On i386, a counter fetch should use atomic read of 64bit value,
otherwise carry from the increment on other CPU could be lost for the
given fetch, making error of 2^32. If 64bit read (cmpxchg8b) is not
available on the machine, it cannot be SMP and it is enough to disable
preemption around read to avoid the split read.
On x86 the counter increment is not atomic on purpose, which makes it
possible for the store of the incremented result to override just
zeroed per-cpu slot. The effect would be a counter going off by
arbitrary value after zeroing. Perform the counter zeroing on the
same processor which does the increments, making the operations
mutually exclusive. On i386, same as for the fetching, if the
cmpxchg8b is not available, machine is not SMP and we disable
preemption for zeroing.
PowerPC64 is treated the same as amd64.
For other architectures, the changes made to allow the compilation to
succeed, without fixing the issues with zeroing or fetching. It
should be possible to handle them by using the 64bit loads and stores
atomic WRT preemption (assuming the architectures also converted from
using critical sections to proper asm). If architecture does not
provide the facility, using global (spin) mutex would be non-optimal
but working solution.
Noted by: bde
Sponsored by: The FreeBSD Foundation
Provide both __sync_*-style and __atomic_*-style functions that perform
the atomic operations on ARMv5 by using Restartable Atomic Sequences.
While there, clean up some pieces of code where it's sufficient to use
regular uint32_t to store register contents and don't need full reg_t's.
Also sync this back to the MIPS code.
After pushing in my fix for the 2 byte functions, I realized that the
functions for 1 and 2 byte operations had become identical. Reduce the
code size by merging the functions for 1 and 2 byte operations together.
While there, slightly improve variable naming and comments.
This is based on the AR933x (Hornet) SoC from Qualcomm Atheros.
It's a much nicer board to do development on - 64MB RAM, 16MB flash.
The development board breaks out the GPIO pins, ethernet, serial (via
a USB<->RS232 chip), USB host and of course a small wifi antenna.
Everything but the wifi works thus far.
Even though I tested the 1-byte operations on arbitrarily aligned bytes,
it seems I did not do this for the 2-byte operations.
Create easy to read functions that are used to get/put bytes and
halfwords in words. To keep the compiler happy, explicitly read two
bytes into a union to obtain a 16-bit value.
To make <stdatomic.h> work on MIPS (and ARM) using GCC, we need to
provide implementations of the __sync_*() functions. I already added
these functions for 4 and 8 byte types to libcompiler-rt some time ago,
based on top of <machine/atomic.h>.
Unfortunately, <machine/atomic.h> only provides a subset of the features
needed to implement <stdatomic.h>. This means that in some cases we had
to do compare-and-exchange calls in loops, where a simple ll/sc would
suffice.
Also implement these functions for 1 and 2 byte types. MIPS only
provides ll/sc instructions for 4 and 8 byte types, but this is of
course no limitation. We can simply load 4 bytes and use some bitmask
tricks to modify only the bytes affected.
Discussed on: mips, arch
Tested with: QEMU
this file is in FreeBSD. There's formality to this that hasn't
happened and Juniper is perfectly fine with being the holder.
Discussed with: eadler, imp, jhb
ownership to the FreeBSD foundation for the years this file has been in
the FreeBSD repository.
This file was originally created by Juniper as part of upgrading to FreeBSD
4.10 (which had no MIPS support) and held functions found on other machines
It grew actual functionality over time. The functionaliy was copied from
other architectures and ported to MIPS on a as-needed basis.
Approved by: Mark Baushke (Juniper IP)
Approved by: Megan Sugiyama (Juniper legal)
Pointed out by: jmallett@
Requested by: core (jhb@)
o Relax locking assertions for pmap_enter_object() and add them also
to architectures that currently don't have any
o Introduce VM_OBJECT_LOCK_DOWNGRADE() which is basically a downgrade
operation on the per-object rwlock
o Use all the mechanisms above to make vm_map_pmap_enter() to work
mostl of the times only with readlocks.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Convert the structures to C99 style initialisation, which makes it
a lot easier to check that all of them are set and to generate a
derived template from them.
Sponsored by: DARPA, AFRL
MFC after: 2 weeks
Until an ADM6996 driver shows up, this allows for the two switch
ports to be used.
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
Reviewed by: ray
order to match the MAXCPU concept. The change should also be useful
for consolidation and consistency.
Sponsored by: EMC / Isilon storage division
Obtained from: jeff
Reviewed by: alc
Remove #define to get kludges that asm.h used to define
Move clever macros to access assembler instructions to trap.c
Remove __ASSEMBLER__ ifdefs in regdef.h: they aren't needed anymore.
expand the %sccs.include.redist.c% directive with the standard
3-clause license, and add $FreeBSD$ to keep the commit script happy.
# This may break some mips stuff, which will be fixed in the next commit.
I/O clock. Thankfully, the simple executive provies a way to querry
the proper clock that works on all models. Move to asking for the SCLK
via this interface.
This gets the serial console working after we start init and open the
console and set the divisor (which turned the output from good to
bad). I can login on the console now.
in the pcb. setjmp/longjmp in the kernel also used these values, so
continue to use them although their use isn't technically the pcb
register array (matching is all that's important for setjmp/longjmp in
the kernel). Finally, eliminate the old register names from regnum.h.
This is a lexical change only. The non-debug .o files have the same md5.
Partially implement generic_bs_*_8() for MIPS platforms.
This is known to work with TARGET_ARCH=mips64 with FreeBSD/BERI.
Assuming that other definitions in cpufunc.h are correct it will
work on non-o64 ABI systems except sibyte. On sibyte and o32 systems
generic_bs_*_8() will remain panic() implementations.
Sponsored by: DARPA, AFRL
Reviewed by: imp, jmallett (older versions)
(Wasting 4k just as a temporary placeholder for a boot environment seems
a bit ridiculous, but hey.)
Tested: gxemul:
$ gxemul -e malta -d i:/home/adrian/work/freebsd/svn/mfsroot-rspro.img -C 4Kc /tftpboot/kernel.MALTA
to unique values.
There's some confusion about what the n32 assembler API really is
(since on page 9 of the spec they say that t0-t3 don't exist, then
turn around on page 22 and say that t4-t7 don't exist), and this
doesn't touch that.
NetBSD's version of this file follows the convention I used here, and
is likely to be correct.
This should fix gdb/ptrace.
sys/arm and sys/mips), squelching the clang 3.3 warnings about this.
Noticed by: tinderbox and many irate spectators
Submitted by: Luiz Otavio O Souza <loos.br@gmail.com>
PR: kern/177759
MFC after: 3 days
Having MIPS_MAX_TLB_ENTRIES defined to 128 is misleading, since it used
to be 64 in older releases of MIPS architecture (where it could be read
from Config1) and can be much more than 128 for the newer processors.
For now, move the definition to the only file using it (mips/mips/tlb.c)
and define MIPS_MAX_TLB_ENTRIES depending on the MIPS cpu defined. Also
add few checks so that we do not write beyond the end of the tlb_state
array.
This fixes a kernel data corruption seen in Netlogic XLP, which was casued
by tlb_save() writing beyond the end of tlb_state array when breaking into
debugger.
Introduce counter(9) API, that implements fast and raceless counters,
provided (but not limited to) for gathering of statistical data.
See http://lists.freebsd.org/pipermail/freebsd-arch/2013-April/014204.html
for more details.
In collaboration with: kib
Reviewed by: luigi
Tested by: ae, ray
Sponsored by: Nginx, Inc.
* arge0 is MII
* arge1 is GMII
* the MDIO bus is on arge1, not arge0
* the default switch config is to have ports 0-3 as the switch group,
with port 4 being an external PHY dedicated to arge0 (ie, 'cpu' port.)
Whilst I'm here, remove unused bits and pieces from the config.
Tested:
* AP121, ping on both arge0 and arge1
* Tested switch port detection using etherswitchcfg
* Enable RX and host interrupts during bus probe/attach
* Disable all interrupts (+ host ISR) during bus detach
* Enable TX DONE interrupt only when we start transmitting; clear it when
we're done.
* The RX/TX FIFO depth is still conjecture on my part. I'll fix this
shortly.
* The TX FIFO interrupt isn't an "empty" interrupt, it's an "almost empty"
interrupt. Sigh. So..
* .. in ar933x_bus_transmit(), wait for the FIFO to drain before
continuing.
I dislike having to wait for the FIFO to drain, alas.
Tested:
* Atheros AP121 board, AR9331 SoC.
TODO:
* RX/TX overflow, RX error, BREAK support, etc.
* Figure out the true RX/TX FIFO depth.
This implements the bus transmit/receive/sigchg/ipend methods with
a polled interrupt handler (ipend) rather than enabling hardware
interrupts.
The FIFO is faked at 16 bytes deep for now, just so the transmit
IO side doesn't suck too bad (the callout frequency limits how quickly
IO is flushed to the sender, rather than scheduling the callout more
frequently whilst there's active TX. But I digress.)
Tested:
* Atheros AP121 (AR9330) reference board, booting to multi-user interactive
mode.
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the
atacontrol utility and some man pages. Remove useless now options ATA_CAM.
No objections: current@, stable@
MFC after: never
uart(4) allocates send and receiver buffers in attach() before it calls
the low-level driver's attach routine. Many low-level drivers set the
fifo sizes in their attach routine, which is too late. Other drivers set
them in the probe() routine, so that they're available when uart(4)
allocates buffers. This fixes the ones that were setting the values too
late by moving the code to probe().
* Add baud rate and divisor programming code. See below for more
information.
* Flesh out ar933x_init() to disable interrupts and program the initial
console setup.
* Remove #if 0'ed code from ar933x_term().
* Explain what these functions do.
Now, the baud rate and divisor code comes from Linux, as a submission
to the OpenWRT project and Linux kernel from
Gabor Juhos <juhosg@openwrt.org>.
The original ticket for this code is https://dev.openwrt.org/ticket/12031 .
I've contacted Gabor and asked for his permission to also licence the patch
in question (which covers this code) to BSD lience and he's agreed.
Hence why I'm including it here in FreeBSD.
Tested:
* AP121 (AR9330)
* Default clock is 25MHz;
* Remove the UART register macro here - it's not needed as we don't need
to "adjust" the register offset / spacing at all;
* Remove unused fields in the softc.
Tested:
* AP121
This implements the kernel glue needed (getc, putc, rxready).
This isn't a 16550 UART, even if the datasheet overview claims so.
The Linux ar933x support was used as a reference, however the uart code
is a reimplementation.
Attentive viewers will note that the uart code is based off of the ns8250
code and the UART bus code is a stubbed-out version of this. I'll be
replacing it with non-stubbed versions soon, making this a fully featured
driver.
Tested:
* AP121 reference board (AR933x), booting through the mountroot> prompt;
then doing some basic interactive tests in ddb.
This was ported from the AR724x code and I think that also doesn't
quite work. I'll investigate that soon.
With this in place the system reset path works, so 'reset' from kdb
actually resets the SoC.
Tested:
* AP121 test board
CPUs.
The AR933x is a mips24k based SoC with an AR9380 series SoC on board,
two gigabit ethernet interfaces and an internal 10/100mbit ethernet
switch. There's also the normal interfaces (USB, ethernet, uart, GPIO.)
The downside? There's a non-ns8250 UART device.
With a very basic UART driver (not in this commit) the SoC is initialised
and boots up. I'll commit the UART code soon and then link it into the
general setup path.
This code is a re-implementation based from the Linux kernel / openwrt
AR933x support.
TODO:
* UART (obviously)
* All of the ethernet, USB and wifi SoC glue, including ethernet PLL
programming.
do not map the b_pages pages into buffer_map KVA. The use of the
unmapped buffers eliminate the need to perform TLB shootdown for
mapping on the buffer creation and reuse, greatly reducing the amount
of IPIs for shootdown on big-SMP machines and eliminating up to 25-30%
of the system time on i/o intensive workloads.
The unmapped buffer should be explicitely requested by the GB_UNMAPPED
flag by the consumer. For unmapped buffer, no KVA reservation is
performed at all. The consumer might request unmapped buffer which
does have a KVA reserve, to manually map it without recursing into
buffer cache and blocking, with the GB_KVAALLOC flag.
When the mapped buffer is requested and unmapped buffer already
exists, the cache performs an upgrade, possibly reusing the KVA
reservation.
Unmapped buffer is translated into unmapped bio in g_vfs_strategy().
Unmapped bio carry a pointer to the vm_page_t array, offset and length
instead of the data pointer. The provider which processes the bio
should explicitely specify a readiness to accept unmapped bio,
otherwise g_down geom thread performs the transient upgrade of the bio
request by mapping the pages into the new bio_transient_map KVA
submap.
The bio_transient_map submap claims up to 10% of the buffer map, and
the total buffer_map + bio_transient_map KVA usage stays the
same. Still, it could be manually tuned by kern.bio_transient_maxcnt
tunable, in the units of the transient mappings. Eventually, the
bio_transient_map could be removed after all geom classes and drivers
can accept unmapped i/o requests.
Unmapped support can be turned off by the vfs.unmapped_buf_allowed
tunable, disabling which makes the buffer (or cluster) creation
requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped
buffers are only enabled by default on the architectures where
pmap_copy_page() was implemented and tested.
In the rework, filesystem metadata is not the subject to maxbufspace
limit anymore. Since the metadata buffers are always mapped, the
buffers still have to fit into the buffer map, which provides a
reasonable (but practically unreachable) upper bound on it. The
non-metadata buffer allocations, both mapped and unmapped, is
accounted against maxbufspace, as before. Effectively, this means that
the maxbufspace is forced on mapped and unmapped buffers separately.
The pre-patch bufspace limiting code did not worked, because
buffer_map fragmentation does not allow the limit to be reached.
By Jeff Roberson request, the getnewbuf() function was split into
smaller single-purpose functions.
Sponsored by: The FreeBSD Foundation
Discussed with: jeff (previous version)
Tested by: pho, scottl (previous version), jhb, bf
MFC after: 2 weeks
pages around, taking array of vm_page_t both for source and
destination. Starting offsets and total transfer size are specified.
The function implements optimal algorithm for copying using the
platform-specific optimizations. For instance, on the architectures
were the direct map is available, no transient mappings are created,
for i386 the per-cpu ephemeral page frame is used. The code was
typically borrowed from the pmap_copy_page() for the same
architecture.
Only i386/amd64, powerpc aim and arm/arm-v6 implementations were
tested at the time of commit. High-level code, not committed yet to
the tree, ensures that the use of the function is only allowed after
explicit enablement.
For sparc64, the existing code has known issues and a stab is added
instead, to allow the kernel linking.
Sponsored by: The FreeBSD Foundation
Tested by: pho (i386, amd64), scottl (amd64), ian (arm and arm-v6)
MFC after: 2 weeks
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.
The cam changes unify the bus_dmamap_load* handling in cam drivers.
The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.
Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
The changes are:
- the microcore code loaded into the NAE has to be byteswapped
in LE
- the descriptors in memory for a P2P NAE descriptor has to be
byteswapped in LE
- the m_data pointer is already cacheline aligned, so the
unnecessary m_adj to cacheline size can be removed
- fix mask used to obtain physical address from the Tx freeback
descriptor
- fix a compile error in code under #ifdef
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
The CMS output queue credit configuration register is 64 bit, so use
a 64 bit variable while updating it.
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Update MDIO reset code to support Broadcom XLP B1 revisions.
Update nlm_xlpge_ioctl, nlm_xlpge_port_enable need not be
called after nlm_xlpge_init.
Obtained from: Venkatesh J V <venkatesh.vivekanandan@broadcom.com>
Support few more versions of board firmware. In case the security
block is disabled, enable it at boot. Also increase the excluded
memory region to cover the area used by the firmware to initialize
devices.
Update the function xlp_pcib_hardware_swap_enable() to do nothing
when BYTE_ORDER is not BIG_ENDIAN. PCIe hardware swap is not requred
in little-endian mode as the endianness matches that of CPU.
Write FDT attachment for the Terasic MTL (multitouch LCD) driver.
Exploit the fact that FDT allows multiple memory ranges to be
assigned to a device, giving us a cleaner description than
device.hints does.
Portions of this changeset that remove mtl from BERI device.hints and
add to DTS will be merged separately.
Sponsored by: DARPA, AFRL
rather than a constant so that VM_KMEM_SIZE_MAX will scale automatically
with the kernel address space size. This is particularly important for
MIPS because the same definition is used by both 32- and 64-bit kernels.
Tested by: jchandra
Provided a bus_space implementation for FDT, modelled on
bus_space_generic, but with a local version of the map address
routine that does a P->V translation, as is the case with NLM's
similar routine for XLP. It's not clear to me that this is the
right solution -- possibly this belongs in simplebus -- however,
it is sufficient to get the DE4 LED driver working.
Sponsored by: DARPA, AFRL
In a sign of weakness, replicate the MIPS bus_space_generic.c to
produce a new FDT version, which will perform necessary address
space translation for bus_space -- the solution used in NLM's MIPS
FDT support, but possibly not quite the right thing. This is
inconsistent with regular I/O via the nexus and the generic
bus_space, which instead perform translation via pmap_mapdev()
when a resource is activated. However, it will work while I
attempt to identify what the right way to reconcile possible
approaches.
(Another approach might be to make simplebus use Nexus's activate
routine instead of a generic one?)
Sponsored by: DARPA, AFRL
