Commit Graph

54415 Commits

Author SHA1 Message Date
Andrew Gallatin
689634a3ea Convert the pcib_{read,write}_config args from signed to unsigned,
like the args to the config space accessors these functions replaced.

This reduces the likelyhood of overflow when the args are used in
macros on the alpha.  This prevents memory management faults when
probing the pci bus on sables, multias and nonames.

Approved by: dfr
Tested by: Bernd Walter <ticso@cicely8.cicely.de>
2000-12-01 15:27:48 +00:00
Jonathan Lemon
280a27d267 Add PCI id for the RAID LC2 controller.
Pick up correct location for the DEC version of the chip, this
got broken in a previous commit.
2000-12-01 15:26:11 +00:00
Ruslan Ermilov
a3a04c4787 This page requires tbl(1). 2000-12-01 13:51:33 +00:00
David E. O'Brien
bddc60b42c Fix a "#ifdef" where a comparison operator was used.
GCC 2.96 does not like this.
2000-12-01 12:29:00 +00:00
Dag-Erling Smørgrav
b8b5f4629f Disconnect sysvipc, since it doesn't build. 2000-12-01 12:26:39 +00:00
Sheldon Hearn
52bb494f29 Catch up to perl-5.6.0. 2000-12-01 12:11:24 +00:00
Mike Smith
3a55bc5d5b Remove duplicate definition. 2000-12-01 12:10:06 +00:00
Mike Smith
96e38a0b8b Update local changes for new hardware register interface. 2000-12-01 12:09:18 +00:00
Chris D. Faulhaber
b673f44d6d Properly check malloc(3) return values
Approved by:	ken
2000-12-01 12:02:16 +00:00
Brian Somers
81bb1040b1 Add more comments, fix a typo, mention how to do PPPoUDP using encryption
to create a VPN.
2000-12-01 11:52:22 +00:00
Ruslan Ermilov
6e982e07ec Eliminate a few more groff(1) warnings. 2000-12-01 11:33:55 +00:00
Dag-Erling Smørgrav
79aad71d3b Remove some obsolete comments. 2000-12-01 11:05:15 +00:00
Dag-Erling Smørgrav
f9c2053bca Clean up the whitespace encoding code. 2000-12-01 11:04:57 +00:00
Dag-Erling Smørgrav
025bb05a82 Add SCHEME_HTTPS. 2000-12-01 11:04:43 +00:00
David E. O'Brien
9ea458c501 Update the 3-June-2000 import delete list to keep mkdeps.[ch] which
is needed by the new C preprocessor.
2000-12-01 11:02:05 +00:00
David E. O'Brien
d14352244a Comment an endif. 2000-12-01 10:20:17 +00:00
Mike Smith
c434440bac AcpiOsMem primitives as required by the new ACPI CA snapshot 2000-12-01 10:19:28 +00:00
Mike Smith
042283a67b Update to work with the new ACPI CA snapshot.
- Use ACPI_PHYSICAL_ADDRESS
 - RSDT -> XSDT
 - FACP -> FADT
 - No APIC table support
 - Don't install a global EC handler; this has bad side-effects
   (it invokes _REG in *all* EC spaces in the namespace!)
 - Check for PCI bus instances already existing before adding them
2000-12-01 10:18:57 +00:00
Brian Somers
6e4cd31d99 Exit if malloc() returns NULL
Submitted by: Chris Faulhaber <jedgar@fxp.org>
2000-12-01 09:59:40 +00:00
Mike Smith
1533a5cfd2 We need support for comparing quad_t's now (ACPI CA uses this). 2000-12-01 09:54:17 +00:00
Mike Smith
5ce7c8b546 Add one new file brought in with the ACPI CA 20001115 import. 2000-12-01 09:52:47 +00:00
Mike Smith
8b7f715dd3 Resolve conflicts from the vendor update. 2000-12-01 09:49:35 +00:00
David E. O'Brien
2c5569d6ff The GCC 2.96 snapshots have slightly different rules for finding include
files.  Mostly -I${.CURDIR} was needed -- especially for YACC generated
files as the new cpp does not look in the ultimate source file
(ie, the .y file)'s directory as told by the "#line" directive.  Some were
misspellings of "-I${.CURDIR}" as "-I.".
2000-12-01 09:39:28 +00:00
Mike Smith
de17efd5b3 This commit was generated by cvs2svn to compensate for changes in r69450,
which included commits to RCS files with non-trunk default branches.
2000-12-01 09:36:25 +00:00
Mike Smith
f2ed5750af Update to the 20001115 Intel ACPI CA snapshot. 2000-12-01 09:36:25 +00:00
Alfred Perlstein
78525ce318 sysvipc loadable.
new syscall entry lkmressys - "reserved loadable syscall"

Make syscall_register allow overwriting of such entries (lkmressys).
2000-12-01 08:57:47 +00:00
Alfred Perlstein
3a4d365463 Add reserved lkmressys keyword. I swear, this script will die the
next time I need to hack on it.
2000-12-01 08:47:54 +00:00
Ruslan Ermilov
50ab935d46 mdoc(7) police: fixed errors from the previous revision, keep
the synopsis in a nice form, and a few more cosmetic changes.
2000-12-01 08:17:15 +00:00
Alfred Perlstein
1dc8643099 implement NOSTD syscall type, this creates the syscall args, but sticks
a lkmnosys into the sysent table so that SYSCALL_MODULE() works
2000-12-01 07:40:20 +00:00
Alfred Perlstein
c5a86b0ab9 Translate alfred to english.
Submitted by: bde
2000-12-01 06:59:18 +00:00
David E. O'Brien
d548f6db32 There is no src/contrib-crypto/ anything directory. So don't look for
include files in subdirs of it.
2000-12-01 06:34:44 +00:00
John Baldwin
0de7d1da20 Protect access to p_stat with sched_lock. 2000-12-01 06:34:19 +00:00
John Baldwin
1bcb20def1 Fix this slightly better by using NON_GPROF_RET instead of duplicating
hard-coded asm.

Suggested by:	bde
2000-12-01 05:29:21 +00:00
Kazutaka YOKOTA
872dfb2dd3 - Add a hack for "psmintr: out of sync.." This is NOT a fix,
but a hack! Add `flags 0x8000' to the psm driver to enable it.
  The psm driver will try to get out of out-of-sync situation
  by disabling the mouse and immediately enable it again.

If you are seeing this out-of-sync problem because of an
incompetent(?!) KVM switch, this hack will NOT be good
for you.  However, if you are occasionally seeing the
problem because of lost mouse interrupt, this might help.
2000-12-01 05:26:24 +00:00
Kazutaka YOKOTA
ed584487bd - Slightly rearrnage IntelliMouse Explorer and Logitech
MouseMan+ identification routines for efficiency.
  No functional change.
2000-12-01 05:24:30 +00:00
Jake Burkholder
1512b5d6ab Use an mp-safe callout for endtsleep. 2000-12-01 04:55:52 +00:00
John Baldwin
2191340786 Use msleep() instead of mtx_exit()/tsleep() so that we release the lock and
go to sleep as an "atomic" operation.
2000-12-01 03:43:33 +00:00
John Baldwin
472fd56ea5 Don't update p_stat in exit1() to SZOMB until after releasing the allproc
lock.  Otherwise, if we block on the backing mutex while releasing the
allproc lock, then when we resume, we will be at SRUN, and we will stay
that way all the way through cpu_exit.  As a result, our parent will never
harvest us.
2000-12-01 03:42:17 +00:00
Brian Somers
723aebe85e Mention the MTU in ``show iface''. 2000-12-01 03:22:18 +00:00
Jake Burkholder
96fde7da19 Use msleep instead of mtx_exit; tsleep; mtx_enter, which is not safe. 2000-12-01 02:18:38 +00:00
Jake Burkholder
21ad98bca8 Change doreti to take a trapframe instead of an intrframe.
Remove associated pushes of dummy units to convert frame.

Reviewed by:	jhb
2000-12-01 02:09:45 +00:00
Andrey A. Chernov
fea0a15961 Cosmetique: don't use localized date 2000-12-01 01:58:48 +00:00
John Baldwin
6936206ebd Split the WITNESS and MUTEX_DEBUG options apart so that WITNESS does not
depend on MUTEX_DEBUG.  The MUTEX_DEBUG option turns on extra assertions
and checks to verify that mutexes themselves are implemented properly.
The WITNESS option uses extra checks and diagnostics to verify that other
code is using mutexes properly.
2000-12-01 00:10:59 +00:00
Warner Losh
d30cc7112b Kill #define of DETACH_FORCE since it is now in card_if.m 2000-11-30 23:30:47 +00:00
Robert Watson
e292984cd3 o Make comment match reality, synch code with comment.
o In practice: the comment indicates that all but umask and
  environmental variables of the users login class are applied when su
  occurs, unless -m is used to specify a class.  This was incorrect;
  in practice, the uid, gids, resources, and priority were set, and
  then resources and priority were selectively removed.  This meant
  that some aspects of the user context were not set, including handling
  of login events (wtmp, utmp), as well as the path specified in
  login.conf.
o I changed it so that the behavior is the same, but instead,
  LOGIN_SETALL is used, and appropriate flags are removed, including
  the LOGIN_SETLOGIN and LOGIN_SETPATH entries that were implicitly
  not present before.  I also updated the comment to reflect
  reality, selecting reality as the "correct" behavior.
o This has the practical benefit that as new LOGIN_SET* flags are
  introduced, they are supported by su unless specifically disabled.
  For example, of a LOGIN_SETLABEL flag is introduced to support
  MAC labels determined by the user's login class, then su no longer
  has to be modified.
o It might be desirable to have su use LOGIN_SETPATH depending on
  its command line parameters, as it might or might not be
  considered part of the "environment".

Obtained from:	TrustedBSD Project
2000-11-30 23:14:55 +00:00
Brian Somers
88cd46c4d3 Get rid of that damned ``i4b-L4-i4b_l4_setup_timeout: 975625189: ERROR:
idletime[900]+earlyhup[5] > unitlength[60]!'' message.
2000-11-30 23:08:36 +00:00
Andrey A. Chernov
17927a641c Add missing && which absense stops 'make world' 2000-11-30 23:01:43 +00:00
Brian Somers
9f361a4b13 Add some comments and $FreeBSD$ 2000-11-30 22:24:51 +00:00
Brian Somers
35ccfc58d8 Update some misleading comments, empty ``set logout'', and add a
comment describing how to take advantage of telcos that give
free phone calls at certain times.
2000-11-30 22:22:09 +00:00
Luigi Rizzo
5fed4e9f8c login.conf: we don't want coredumps on picobsd
rc.conf: make the system recognise the MAC address and assign an IP
    automatically from /etc/hosts (or ask the user)
sshd_config: don't do x11 forwarding.
2000-11-30 21:43:37 +00:00